"Errors Found During Burning Process"

Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
Neil

Colleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks!

Similar Messages

Error found during burning process

I am having a problem burning my iDVD project to disk. I'm using DVD-R disks. The message I get is "Errors found during burning process". The burning process seems to work correctly all the way through until it gets to the last step - "burning".

There are lots of things that can cause problems burning to disk.
I suggest that you save your project as a disk image (an option on the iDVD file menu) and see if that is successful. If it is successful, that would eliminate issues related to iDVD, encoding, and source material. After that, I would look to what brand of DVD you are using (Verbatim, Sony, Fuji, and Hp are oft recommended here), what burn speed (4x or lower is best), whether all iLife programs are up to date, whether you have any 3rd party or Quicktime plug-ins that might be interfering, whether you have sufficient hard disk space to burn (20 Gb is recommended, although 5GB would be absolute minimum).

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

ERRORS found during the burning process #-34506...any idea what this means?

ERRORS found during the burning process #-34506...any idea what this means?
This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
thanks in advance
Jeremiah

First I'd be certain that I had changed the preferences from best quality to best performance.
Did you follow the chapter rules?
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
You may have already done this, but
Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
:)Sue

Error during burning process

I am using OS10.4.6
Powermac G5
Final Cut HD4.5
IDVD 5.0.1
I have made a 27 minute movie in Final cut....i cannot seem to burn it in IDVD no matter what. I have been using this full time for 4 yrs and have never had this issue.
I have tested other movies and they burn fine...i have tried throwing away all the render files and re-rendering the movie in final cut and then re-exporting it out. i have exported it out in 2 different ways...no matter what i do, I keep getting an error during the burning process that says
there was an ERROR in the burning process
which is leading me to believe that some file within my final cut project is corrupt or problematic.
i have worked on this thing for about 50 hours and cannot start over from scratch, Help!

dejavu! http://discussions.apple.com/thread.jspa?threadID=512852&tstart=0
Ashley- I know you're probably getting desperate but please don't duplicate post.
I'm not real familiar with iDVD but I know you have to export a QT movie from FCP and then burn that right? Your QT Movie, was it a self contained QT or a refernce Movie. If you have no idea what I just asked, when you exported it and you went to File>Export>QT Movie> did you select the box that says "make movie self-contained"?
If so then a corrupt file is a moot (sp?) point. Can you open the QT Movie and watch it successfully in QT?
If you CAN watch it in QT then your problem probably lies in iDVD.
Answer these questions for us and we'll take the next step to getting a DVD in your hands.

Application error occurred during request processing TRIAL EmployeeAddressD

I ve the NW Java Trial which is chipped with a demo scenario.
When I try to test this service:
Service: EmployeeAddressData
Test: getAddressByPersonalID_R (String personalid)
I'm runing into:
Result:
Application error occurred during request processing.
Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id: [000C2980205100660000001900000F1D00044B2662750D88]
In the netweaver portal itself the user gets the following information when trying to access its data:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document' User not found in HR: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document'
Any ideas on how to solve this or how to get an error msg, which has more information?
Edited by: Deniz Kesmen on Apr 18, 2008 5:52 PM

Hi Deniz Kesmen
Did you got the solution of the above problem?
I am also getting the same type of issue while executing the webservice for a BRM rule from a webdynpro java application.
I am using adaptive web service model for executing the webservice. Error is given below:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://LT-ENTITPCONSAJ.s1.ms.unilever.com:50000/testrule/testrulePort?wsdl&mode=ws_policy' with operation 'invokeRules' in interface 'testrulePortType'
I am using CE 7.2 system.
If I execute the web service from wsnavigator it works fine.
Appreciate for you help.
Regards
Sajith

Application error occurred during request processing. in Netweaver 2004s

Hi
I am facing the following error when I am try to open Netweaver Administrator(nwa)
using following URl
http:<serevername>:50100/nwa
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Found no client for parameter: null, useragent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.2; .NET CLR 1.1.4322)
Exception id: [00145E186CB7007300000017000015FC0004242617536888
System landscape
Netweaver 2004s/ windows 2003/ MaxDB
Thanks and Regards
Ravindran

Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Found no client for parameter: null, useragent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.2; .NET CLR 1.1.4322)

Do you use the new IE 7 ?
If so please try to open the NWA with the IE 6 - perhaps it helps.
Regards,
Norman

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
 The indicator AUFER from the delivery type contradicts the
 storage location constellation that was determined by the
 WM system.
 TVLK-AUFER = '<VAR2>'
 WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Error occurred during control processing

Hi Team,
I am developing a module pool program. Now I face an Information message "Error occurred during control processing" whenever I open the program in SE80. The object list is also distorted. The issue is with this program only and other Programs can be opened by SE80 without any message being displayed. Please help me find out what is so special about my module pool program.
Regards,
Amit

Hi,
Which version of SAP GUI you are using .
Try upgrading it , if it is an older version .
Had the same message once but not for module pool ,and it got removed after SAPGUI upgrade .
Regards ,
Hemant
Edited by: Hemant.J on Jul 14, 2011 10:56 AM

SOAP to proxy scenarion error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

Hi all
My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP: in sxmb_moni sap pi .
Some times this interface is failing and some time its successfully processing.
While testing with successful xml data also i am getting the same error in sxmb_moni.
I modified the proxy inbound code where passing error message and still i am getting the same message.
Please suggestion the same for error solving.
Regards
Ravi.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

An error occurred during the processing of a configuration file.

hi,
On installation and using oracle session provider, i am getting following error.
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 51: <providers>
Line 52: <add name="MyOracleSessionStateStore"
Line 53: type="Oracle.Web.SessionState.OracleSessionStateStore,
Line 54: Oracle.Web, Version=2.112.2.0, Culture=neutral,
Line 55: PublicKeyToken=89b483f429c47342"
Can any one help me?
Thanks in advance
Siva

my server :
os windown server 2003
iis 6.0

Application error occurred during request processing.

Hi, I got the following error when you invoke a method of a web service deployed on my local server
Details:com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id:
I don´t have any compilation errors in the Java source code published by the Web service.

Hi Sumit,
thanks for the quick reply. I get only these lines when i execute webservice.
500 Internal Server Error
Application error occurred during request processing
 Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
 Exception id: [0016355ABDF800580000016F00002C7800043D23C1985713]
If required i can send my code...
thanks,
sudhir.

Application error occurred during request processing webdynpro

Hi all,
I have developed one sample web dynpro application( welcome). when was deploying the welcome application on the j2ee engine using NWDS. It is giving the fallowing error i.e.
500 Internal Server Error
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/Welcome' since it is not of a Web Dynpro object.
Exception id: [02004C4F4F50005C0000000A0000091800042D3A2DDDDEDB]
Please help me how to deploy this application successfully.
Regards,
Deviprasad.

Hi Deviprasad,
Check out this link
Re: Internal Server Error 500
Regards,
Prateek

An error occurred during event processing in view InboxResultView_VP.htm

Hi All,
I am getting this specific error when I am trying to access one of the BSP application in HCM.
An error occurred during event processing in view InboxResultView_VP.htm
An exception has occurredException Class CX_SY_REF_IS_INITIAL
Text: Dereferencing of the NULL reference
Program: CL_HREIC_IB_ENTITY_WI_VP======CP
Include: CL_HREIC_IB_ENTITY_WI_VP======CM003
Source Text Row: 20
ASAP help would be required on the same.
Thanks
Swati

Hi Swati,
Check this links, it should help to you
CRM ICWC
ICWC View Cannot be Displayed
Regards
Ramesh

Application error occurred during request processing. TCODE - RSPLAN.

while running the BI Integration Planning When i Click Start Modeler I am getting this error described below
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'sap.com/biplanworkbench1' and application 'Modeler' are not deployed on the server. Please check the used URL for typos.
Exception id: [001125C534B000480000001C000C90C20004261894A9684E]

still getting the same problem
I Have gone through the note no 919850 it says that
In particular, check the version of the BI-REPPLAN and BI-WDALV
software components.
and i have checked these component are not there
now question is how to install these component.
and if that gona really help
another point which i have check is
To do this, use the test function in the Web Dynpro Content
Administrator for JCo connections. The following settings are required
for the two JCo connections BI_METADATA and WD_ALV_METADATA_DEST
when i go to maintain jco connection there is no jco connection at all it is completely blank there

"Errors Found During Burning Process"

Similar Messages

Maybe you are looking for