Errors in BeX Analyzer and Query Designer NW2004S

Hi All, these are the problems -
1) We have installed the FrontEnd and applied SP 1. But when I am trying to
use the Analyzer, the Menu Options are not working. Please give us a
solution to this problem.
2) In Query Designer, when we do drag and drop, the query designer hangs and we need to close the query designer .
3) In Query Designer, if we try to make some changes to an existing query and try to save
we have the following error message -
'Terminate - The system tried to insert a data record, even though a
data record with the same primary key already exists.
Terminate - Program error is class SAPMSSY1 method: UNCAUGHT_EXCEPTION'
Any help will be appreciated.
Best Regards,
Rajib

Hi
The Frontend version is 7.1. So far as I know, only SP 1 is available for version 7.1.
I have got answer for Question 1 - Answer is in SAP Note 1025122.
Still the other questions are unaswered.
Thanks, Rajib

Similar Messages

User profiles for analyzer and query designer

Hello,
I have one short question about user-profiles.
Which user-profile should I best use for a user, who should just use the BEx Analyzer and which profile does a user need for using BEx Analyzer + BEx Query Designer.
Thanks

I just need the SAP-Roles which allows a user to use Analyzer and Query Designer.

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

Error using BEx Analyzer - tools - 'copy sheet' function

Hello,
We are getting an error using BEx Analyzer, when we execute a query or workbook and select the 'copy sheet' function. The error is:
An error occurred when communicating with the BI Server
As a result of this the system has been disconnected from the BI server.
Exception Condition 'BAD_VALUE_COMBINATION' raised.
We are using BEx Analyzer 7.10.
Thanks very much.
Gayle

Hi
Implement this note first
Note 1086904 - BW 7.0 BEx: Transactions RRMX/RRMXP
in case if nottting works
Run the Same query in RSRT transaction code , see if you get the same error.
if you get the same error.
Go to RSRT give the query name and Generate the query (using generate button in RSRT)
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 31, 2009 5:44 AM

Report Designer and Query Designer in BI 7.0

Hi friends,
      what is the use of Report Designer and Query Designer.. and what is the difference between these two..
    I know about Analyser... that is used for designing a query and we can analyse (or) see the result of that query in that window....
     then what is the use of Query Designer... can you give me the brief introduction abt that... if any documents plz farword to me..
my mail id--- [email protected]
thanks
@jay

Hi Ajay,
Report Designer is a newly added feature in BI 7. This helps to do cosmetic changes to the report, change the fonts, add colors etc. Please check this link for more info on Report designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Query Designer, is where you develop, edit your queries.
Analyzer, is where you execute the query and analyze the results.
Hope this helps.

BEx Analyzer / authorizations / query search

Hello everyone
Today I have a problem with my authorizations for the the BEx Analyzer.
The technical name of my InfoArea is VCOPA.
I have a number of queries with the technical name VCOPA_MM001 / VCOPA_M01_X0001 / and so on.
When I open the BEx analyzer and search for queries (wildcard *) I get only my queries with the technical name VCOPA. So far so good... Unfortunately the Bex search results display additionally several query views (like 0D_DX_M01_Q0001_V05) and that is bad. So how can I stop this?
My authorization settings:
S_RS_COMP
ACTVT: 03, 16
RSINFOAREA: VCOPA*
RSINFOCUBE: VCOPA*
RSZCOMPID: VCOPA*
RSZCOMPTP: QVW, REP
S_RS_COMP1
ACTVT: 03, 16
RSZCOMPID: VCOPA*
RSZCOMPTP: QVW, REP
RSZOWNER: *
Thanks in advance..
Regards, Alex
Edited by: Alexander Stettler on Mar 5, 2010 2:50 PM

The roles are customized...
In addition to the listed authorization objekts (s_rs_comp / s_rs_comp1) I have the following objekts in use:
S_RFC
ACTVT : 16
RFC_NAME: *
RFC_TYPE:   FUGR
S_TCODE
TCD: RRMX
S_GUI
ACTVT: 60, 61
S_USER_AGR
ACTVT:     03
ACT_GROUP: *
S_RS_AUTH
BIAUTH: 0BI_ALL
S_RS_FOLD
SUP_FOLDER: X
S_RS_XCLS
ACTVT: 16
RSXCLSID: VCOPA*
RSZOWNER: *
Edited by: Alexander Stettler on Mar 10, 2010 11:25 AM

Error opening bex analyzer

Hi experts,
When i try to log on to the bex analyzer and try opening a simple query it says "Connection to SAP Gateway failed ".Is there some some settings that I have to maintain in the SAP BIW system to be able to open the any quesry in the Bex Analyzer.Please tell me in detail the path/Tcodes and how do i maintain the settings.
Regards

Hi Arnab,
Check is it happening for all users?
Check the auth object S_RFC, do you have this object in your authorization? check the online doc on authorization, to find which values to set for this object.
Hopefully, it might solve your issue.
Regards,
Nataraj.
Sr Consultant-SAP BW, Singapore

Error with BEx Analyzer

I am getting the following errors when launching BEx analyzer. What do I do to solve this"
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'BID - Netweaver 7.0 EHP2 BI' not found in saplogon.ini

check if you are to logon to Query designer for the same system and client. I guess you will not be able to correct.
Most probably, entry for the system is missing in the ini file. check if you are able to connect to Bex analyzer on some other system. If yes, copy the INI file from that system to your system.
you should be able to ini file
C drive > Program Files > SAP > Front End
Regards,
Gaurav

"Critical program error" in BEx Analyzer due to missing BExCompression

Hello. I saw several posts with a "Critical program error" message in new BEx Analyzer 7.0 when try to run query ir workbook, but have not seen any answers to them.
When I look into the trace file BexAnalyzerTrace_<session_id>.txt (attached) in my temp directory, I see following:
System.IO.FileNotFoundException: File or assembly name BExCompression, or one of its dependencies, was not found.
File name: "BExCompression"
at com.sap.bi.et.analyzer.api.BExApplication.DeSerializeApplication(String iString)
at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
But I cannot find any further reference to BExCompression.
Thanks!
Vitaliy

Hi prakash,
we have installed the SAP GUI 7.10 with patch 5 and all the other mandatory components. while working in the query designer for sometime we used to get message " critical program error occured program needs to close" , we still cant figure out what the reason for this. this keep on occuring even if a new session is open.
please advise us what we need to do and if you have any installation guide for this i appreciate if you can share with us.
mail to : [email protected]
thanking you.

Bex Analyser vs query designer

Gurus,
1. Can some one enlighten me on the functionality of Analyser vs Query designer?
2. We have installed NW2004s (BI7) with the standard Business content. I want to see the data along with the graphs when I execute the queries.
I am able to create new web templates (using WAD) and use them in the EP, but do the standard reports (SAP delivered) have web templated assigned for them? How to activate them if this is the case.
I am able to see some charts when I open the same query using the analyser.
Please suggest any relevant documentation for me to read and understand.
Thanks.

Reporting Methods nw2004s
You can use the BEx Analyzer, the Web Applications and the Web Analyzer for the Business Explorer for free multidimensional data analysis as a part of Enterprise reporting.
Bex Analyzer
http://help.sap.com/saphelp_nw2004s/helpdata/en/ba/45583ca544eb51e10000000a114084/frameset.htm
Web Applications
http://help.sap.com/saphelp_nw2004s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
Web Analyzer
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70e18305-2356-2910-4bbe-9c1ebd751032
Presentation - Publishing strategies
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6cc17893-0e01-0010-6d91-f9303b436d91
Hope it Helps
Chetan
@CP..

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
   Dim lRange As Range
   Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
    onAction = True
    onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
    onAction = True
    Call Sheet4.BUTTON_55_Click
    onAction = False
End If
exit_handler:
    Exit Sub
err_handler:
    MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
    Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

Error while executing report from Query designer

Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
Mohan

Hi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh

Error in BEx Analyzer during F4 Value help

Hello Experts,
We are facing a issue where on pressing F4 in Bex Analyzer in variable selection for cost center hierarchy; the operation hangs. I dont get any short dump but following error messages in the analyzer itself
RS_EXCEPTION Message Number 101
Inconsistent Input Parameter (paratmeter: <unknown>, value <unknown>
RSBOLAP Message Number 000
Program error in class SAPMSSY1 method: Uncaught Exception
We are on BI 7.0 SP17. I found a SAP note (1381562) which talks about similar error.
The confusing part is this particular query works fine in Dev, Quality and Test systems but errors out only in production.
Please let me know how relevant is this note. Also let me know if I should be looking at something else to correct this error.
Thanks,
Gaurav

Hi,
Please check your text file contains the exact same characteristics and key figures as defined in your planning funciton for your upload (also the sequence has to be the same)
Regards,
Marasa.

Error with BEx Analyzer to open

Hi,
I am facing with this error message with the BEx Analyzer (Office 2007) when trying to open any query.
" A critical program error occured. The program has to close. Please refer to the trace for further information".
The patch level of GUI is 5(SAP GUI Final Release) and patch level of BEx Analyzer Support Package 0, Revision 461.
I really tried many different options from SAP Notes etc, but did not work. Please let me know if there is anyone faced with this situation or anything that I can do?
Reward points will be assigned.

Hi Kumar,
The critical program error means the frontend installation is not proper.
You need to check the frontend installation as per note 918394 and ensure that all the dlls are green and the frontend patch is latest.You can use GUI 640 with BI 7.0 frontend.
Which front-end version you are using.The frontend patch level is found in the BEx Analyser -> BEx Tool-Bar
-> yellow question mark -> Help -> About => Version <xx> Patch <xx>
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply the latest patch..1600
This should resolve the issue..ensure .net and other prerequisites are installed as per note 877774.
Rgds
Manoj Kumar

Errors in BeX Analyzer and Query Designer NW2004S

Similar Messages

Maybe you are looking for