Errors in Business Content Activation

Hi,
The activation of 0MATERIAL with 'data flow before' as grouping is giving lot of errors like
'Mapping between 0CUSTOMER_TEXT DEV100 0CUSTOMER_TEXT is inconsistent'
Here DEV100 is source system name.
Recently we upgraded BC from 02 to 04. And we are at BW 3.1c .And I observed that.
In sp02 , master data is loaded by direct updating
in SP 04 ,master data is loaded by flexible.
Thank you in advance.
With rgds,
Anil

Hi Anil,
Can you try to simulate the activatation of 0material and 0customer infoobjects with "necessary objects" in the grouping. If you encounter errors try to do this one by one. and if you manage to activate both objects with this option, then try to active 0customer and 0material with the grouping "dataflow before" option.
If you still encounter errors, post those errors again. Hope this helps,
Sree

Similar Messages

Business Content Activation - run time error

Hi guys,
We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
Any clues???
Best regards,
makaleem

Hi Seow,
This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
> Extras ---> Delete Rep Cache
2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
If this helps, don't forget to assign points.
Abdul

Error In Business Content

Hi,
I am getting Errors in business content when Installing objects for Infocube. like
Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
etc.......
Please help me
Regds
Dave.

Hi,
Apply note :1009329
Re: Error while activating Infocubes (0SD_C03) from Business Content
Re: Info Objects & Data source not active.
With rgds,
Anil Kumar Sharma .P

Restrict Business Content Activation

Does anyone know of a way to restrict business content activation while still allowing developers to maintain objects in BW 7.0? I ran a trace while someone was activating an InfoObject and didn't see anything that I could use to achieve this level of control. If I remove the S_RS_ADMWB Maintenance (ACTVT=23) authorization for INFOOBJECT, then that stops the activation; however, we want our developers to be able to maintain existing InfoObjects. We just don't want most to be able to activate business content.
Thanks,
Gail

Thanks for your response, Raghu.
We have our own SAP development team at my company and don't typically use many consultants. It has always been our philosophy to allow our SAP developers to have comparable access across all our SAP development environments (e.g., ECC development, BW development, etc.) for cross-training purposes. But in reality, only a handful of our developers are very knowledgeable in our BW environment; we call them our "BW Administrators". These BW Administrators have concerns that one of the other developers who has played around in the BW environment but isn't all that knowledgeable might activate business content without realizing the implications of what they're doing. We would like for all of our developers to have RSA1 etc. so they can learn more about BW; however, per request of our BW Administrators, we want to restrict them such that they can't activate business content. But as you said (and per authorization tracing that I've done), there doesn't appear to be a way to restrict them from activating business content without also restricting them in other areas where we don't want them restricted. I guess we'll have to rely on administrative controls (i.e., training).
Gail

Regarding error occur in business content activation

Hai experts,
when i am activating the business content its going to dump analysis the system is going to give me the error like " message_type_x" using st22 i found that error occured in abap program .It is an predefined program.Is there any solution for that one other wise i have raise this question to service.sap.com.i need emergency.
bye.

Hi ,
You have to underastand whether this is happening with all the objects , I mean are you getting this dump for any object you are trying to activate through bi content.
If this is happening with few objects then you have see whether the method of activation bi content is being performed in the correct method.
If thisis happening with all the objects then check all the basic settings and at the same time check authorisations.
Check if you have any thing in SU53 transactions.
Regards
Rahul Bindroo

BI Business content activation error

Dear Gurus,
I tried installing the business content InfoObject catalogs:
0FIGL_CHA01 (FIGL: Characteristics)
0FIGL_KYF01 (FIGL: Key Figures)
But the job is cancelled and the message is 'Transfer structure 0COMPANY_TEXT_BA does not exist'.I'm able to see all
the infoobjects in the InfoObject catalog 0FIGL_CHA01 are existing active. But few transfer rules are inactive and
I tried activating the transfer rules and getting the same error meassge 'Transfer structure 0COMPANY_TEXT_BA does not exist'. I tried as mentioned in the note:1077655 and still not able to fix the issue
Can you please help? I give full points.
Note: I did replication of the following before activating BI content on BI side:
0BUS_AREA_ATTR           (no issue with this)
0BUS_AREA_TEXT          (no issue with this)
0CHRT_ACCTS_ATTR     (no issue with this)
0CHRT_ACCTS_TEXT     (no issue with this)
0COMPANY_TEXT          (inactive transfer rules)
0COMP_CODE_ATTR          (inactive transfer rules)
0COMP_CODE_TEXT          (inactive transfer rules)
0GL_ACCOUNT_ATTR     (inactive transfer rules)
0GL_ACCOUNT_T011_HIER     (inactive transfer rules)
0GL_ACCOUNT_TEXT      (inactive transfer rules)
Thanks in advance
Seenu

One reason for you Inactive Transfer structures could be because some of the Objects in BW are inactive or not installed.
There are programs in SE38 which re-activate InfoObjects/ InfoSources/ Update Rules etc in Mass put in ACTIVATE
Also when you did a replication on the Source System to pull the datasources check that the Datasource is there. You need a datasource in order to have an InfoSource attached to it.

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Error installing business content update rules

Hi,
I'm trying to install the below updates rules from the business content
0PLANT$T 0PLANT_TEXT 53AFFWD74OI3CT3RDE3RI9THU
0PLANT 0PLANT_ATTR 5UZVD7UWYN4T81H24YBKGH6KY
I get the error
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Long Text:
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
System Response
The update rules cannot be activated.
Procedure
If error message :
is cut off, proceed as follows to get the complete complete error message:
Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
If I select the Display Activated Program it says does not exist.
Can anyone help me figure out this issue?
Thanks

We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT

Business content activation in fresh implementation

Dear gurus
Kindly excuse me if its an old cliched topic...I am new to implementation and i have been assigned to an end-to-end implementation project..my early work would be to know if standard business content available in BI will suffice our requirement or not....kindly guide as to how proceed from very beginning..what should i do first and yes since i will have to activate the entire flow in BI...how to go about it....i dont know what all ia should ask...kindly help with your suggestions..

Hi:
Please refer to the presentation by Jie Deng, "Presenting SAP NetWeaver Business Intelligence Content"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a017bf61-d61c-2a10-958e-ab18f4e92fbd?quicklink=index&overridelayout=true
Observe that is mandatory to install objects from the bottom up, so it is safer to activate small groups of objects, this way it is also easier to determine the causes of errors and make the appropriate corrections. Basically you need to install the objects in the sequence shown on slide 14.
- Extractor
- InfoObject
- InfoSource
- Transfer Rules (or Transformation Rules for Dataflows available in version 7.0).
- Update Rules (or Transformation Rules for Dataflows available in version 7.0).
- ODS
- Update Rules (or Transformation Rules for Dataflows available in version 7.0).
- InfoCubes
- MultiProviders
- etc, etc..
Also pay special attention to the Section 3 "Activation of SAP BW Business Content" (slides 85 - 107).
There's another presentation by Jie Deng that provides related information.
"Session ID: IM204 Guidelines for Implementing SAP NetWeaver BI Business Content in a Customer System"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ea3d3b-d61c-2a10-7b95-e6508f184aea?quicklink=index&overridelayout=true
Regards,
Francisco Milan.

Update rule could not be found during business content activation

Dear BW experts,
I am having an issue activating business content for an update rule (2LIS_03_BX) for 0IC_C03. Below is a log of the error. It seems like the system is not recognizing the update rule for some reason. Can somebody please help shed some light on this.
Installation (simulation mode) of: Update Rules (UPDR)
Transfer/Merge of the Content Version (Object Type Update Rules )
Object Update Rules BW9VUFZSUYTTIZS0HT9I4U3RP: Installation of the Content Version
Transfer update rules IC: 0IC_C03 / IS: 2LIS_03_BX
Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found
Transferring the 1 objects from type UPDR took 1.2 seconds
Post-processing of Objects after activation
The post-processing lasts 0.0 seconds
Thank you.
Andrew

Ravi,
Thanks for you reply. I checked the underlying cube (0IC_C03) and the info source (2LIS_03_BX) and they are both active. I didn't choose the option in data flow before and after because it would have brought way too much contents which I don't need. Instead, I only activated the info source and update rule individually. All three info sources (2LIS_03_BF, BX, UM) and the info cube were successfully activated. I am only having problem with the update rule.
Any other ideas?
Thanks,
Andrew

Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
<i>Is the request creation for a BEx transport is different from the normal request creation??</i>
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description)        : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1.     On the Data Warehousing Workbench: Business Content screen:
a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
c.     In the left hand frame, select Object Types.
d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2.     In the Selection of Query Objects dialog box.
a.     Select the following InfoObject catalog:
0CHANOTASSIGNED
b.     Choose Transfer Selections.
c.     If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3.     At the top of the right frame, choose Install and select Install in Background.
4.     In the Install Business Content in the Background dialog box choose Yes.
5.     In the Information dialog box choose Continue.
6.     Choose Exit.
please advise on how to continue.
thanks and regards

Error Installing Business Content InfoObject 0GN_VENDOR

Hi,
I installed 0GN_VENDOR from Business Content. It was not active after installing.
When I try to activate 0GN_VENDOR I receive the following error messages:
Attribute 0DBCTRYCOD from characteristic 0GN_VENDOR not (actively) available
Attribute 0DBGUDUNS from characteristic 0GN_VENDOR not (actively) available
I looked in Business Content and found that the the two attributes do not exist in Business Content. So I am unable to install to correct the 0GN_VENDOR issue. I also do not find any related OSS Notes on the Attributes.
What should I do to fix this? Just remove the offending Attributes and activate 0GN_VENDOR?

Hi Kenneth,
Check for the inactive info objects 0DBCTRYCOD and 0DBGUDUNS and try to install these IOs too along with the 0GN_VENDOR.
If you are not able to find them in Business content then it might the problem with the BI content version installed in your system.
Regards
KP

Error installing business content

Hi Experts,
i am getting an error while installing business content for sales and distribution.
i.e-The creation of the export DataSource failed,
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
could any body help.

Hi
The DS should be Activated at R/3 to Install the Business Content on BI side.
Recheck the same with the following
R/3
RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
BI Side
Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
Hope it helps and clear

Finance SCM - Dispute Management Business content activation

Hi,
Got a work on a new requirement to activate all the standard reports available in FISCM-DM
all the reports names are given
Can you please tell me the way how to identify what are all the multi providers , cubes , DSO's data sources need to be activated from the business content considering the list of queries
I mean how to start the analysis.
Please reply asap
Thanks Sruthi

HI Sruthi,
Please follow the below step to activate the standard object :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say Query.Click on Transfer selections.
iii)Now when the object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the query install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Query will be overwritten by the D-version query provided by SAP.
vii)For ur more understanding lets take the example say you have added two CKF to Query now twist is SAP has also just release the enhance Query with two more selctions. Now you are very curious of getting this two selections in your already active query. For this you will be required to install the queryfrom Business content. If you forget to check the Match option then your already added CKF will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal
Edited by: Deepak Machal on Dec 8, 2011 6:46 AM
Edited by: Deepak Machal on Dec 8, 2011 6:47 AM

Errors in Business Content Activation

Similar Messages

Maybe you are looking for