Errors in datastore object in BI 7.0

Hi Guys,
While loading data into the Datastore object i am getting the following errors:
Getting the records into the NewData Table but not into the Activedata and Changelog Tables.It wa showing the errors like this:
Activation of Data / 26.02.2007 / 18:17:34
Main Process
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Data Package 000001
Resource error. No batch process available. Process terminated
Pl send me the solution for this.I need it imdtly.
Points will be awarded
Thanks,
Chinna

Hi
try to activate your ODS manually..there could be some batch processes(for background) and some update programs..when you are doing it in background you are getting that error i think..do it manually..
Hope it helps
Thanks
Teja

Similar Messages

Error activating DataStore Object

Hi
I have created a DSO and put in some key fields and data fields.
During activatation, I encountered the following errors. Pls help !
Internal error occurred when writing..
Error while saving change log for DataStore Object..
Error during creation of DDIC sources of DataStore Object...
Thanks !

Hi M
I can only locate this link
SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE
I cant find the following option !
SET THE PARAMATER SETTINGS FOR DSO
I then went to SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE>Performance Settings>Maintain Runtime Parameters of DSO
I try to do some settings but I cant even locate my DSO since it is not activated.
Pls help, tks.
Edited by: Lay Tin Koh on May 9, 2008 10:22 AM

Accounts Receivable Analysis: Error in DataStore object 0FIAR_O03

Hi!
I am facing with accounts Receivable Analysis Best Practice.
When I try to activate the both DataStore Oobject 0FIAR_O06 and 0FIAR_O03 in tcode RSORBCT I get the following error:
Data source 0DBDUNS_IMPORT_ATTR not maintained- RSAU231
Can some one help me to solve this problem?
Thank you very much!
Axel

Hi!
Many thanks for your response.
I use SAP Solution Manager EhP1 that have:
SAP BW 701 : SAPKW70102
BI CONT 704 : 0001
In tcode RSA6 I could find the Data sources 0FI_AR_6 and 0FI_AR_3.
Could you please help me how to proceed?
Thank you very much!

Error while activating DataStore Object

Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BI

Are you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP..

Error while activating data loaded into DataStore Object in BI 7.0

Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...

Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Invalid DataStore object name error when running process chain after EHP1

Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
Al

Hi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
       particular PSA table for finding the inconsistencies.
2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
      PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
     double check that the invalid partitions are
     corrected.
     Once this is done you can execute the report
     'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram

Problem in activating data in datastore object

Hello,
I have an issue while activating the data in Datastore Object.
I have been trying to load the data to cube 0FIAP_C02. I am going to write down all the process I am doing, so you will have a clear picture and advice me accordingly.
1.)Installing Business content (Cube, Datastore objects, Infosources,
Transfer strcuture and Transfer and update rules) ( 0FIAP_C02, 0FIAP_O06, 0FI_AP_1 and 0FI_AP_6 (infosources)
2.)Replicate the datasources from the R/3 side to BW side (the
datasources are replicated as 3.x)
3.) Create transfer rules and transfer structure.
4.) Create Infopackage for loading data to PSA.
Datasource 0FI_AP_1 -> Full Upload.
Datasource 0FI_AP_6 -> Init. Delta Load.
Load data for both the datasources.
5.)Migrate the 3.x datasources to "Emulated datasources". Create
Transformation between Datasource 0FI_AP_1 and cube 0FIAP_C02, also
create transformation 0FI_AP_6 to Datastore Object 0FIAP_O06.
Create DTP's to load the data from PSA to data targets.
Now is my problem,
1.)I am having errors while activating the data in ODS. (It says that errors occured during the activation of data but I cannot see an error log or anything of that kind.) I can load the data and it gives me green light but when i try to activate it gives errors.
2.)A follow up question of the activation of data is does this data goes and sits in PSA of the data mart 80FIAP_O06.And then do we have to create transformation/DTP from Datastore Object to cube (0FIAP_C02) or we are going to use the Business content transfer rules and Load the data by Infopackage.
Thanks,
Kiran Mehendale.

Hi Kiran,
ad 1.) You most likely have to open a customer problem message. Maybe you try to elaborate on your issue (problem message, etc.) and we can try to assist you.
ad 2.) You can create a DTP from one persistent storage object (PSA, DataStore Object, InfoCube, etc.) to another one. Hence you can also create a DTP for DataStore Object --> InfoCube.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in tabl

Hi gurus,
I recently transported the 0FI_GL_10 datasource to preproduction. when i am trying to load the data in PrePod we are getting this error message.
<b>Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in table RSTS</b>
Any help is appreciated with points.

any more detailed messages,sm21 or st22??
did you try doing RSRV on the datastore object??
are you using the nw2004s data flow??
if using 3.x data flow ,skip PSA and try reloading it.
Hope it Helps
Chetan
@CP..

Invalid DataStore object name /BIC/B0005712

Hi Frnds,
I was trying to execute a PSA deletion step on one Datasource. In that process I got the below error.
Error msg: Invalid DataStore object name /BIC/B0005712: Reason: No valid entry in table RSTS.
Do, I need to maintain anything related to this Datasource in the table RSTS. if so....what it could be ?
Or Do we have any other solution ?
Thank you.
NGR.

Hi,
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve.
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE

Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks.

Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks.

Renaming default Datacenter, Cluster, and Datastore object names in EVO:RAIL

Hello,
The Datacenter, Cluster, and vSAN Datastore objects in my newly-installed EVO:RAIL appliance all default to a label of "MARVIN-...". Is it safe to rename these labels appropriate to my environment, such as a geographic location for my Datacenter object? I suspect that it is okay because the underlying UID will not change, but am looking for confirmation from someone who has successfully done this in a lab or production environment and who has also been successful in applying EVO:RAIL patches afterward.
Thanks in advance.

Just to close the loop, I successfully renamed the datacenter, cluster, and vSAN objects in vCenter Server.
I kept a close watch on Log Insight at each step, and did log one error that I found suspicious following the object rename of the vSAN datastore:
2015-01-29T19:03:27.158Z <My 4th Host's FQDN> Hostd: [783C2B70 info 'DiskLib'] DISKLIB-LINK :DiskLinkGetSpaceUsedInfo: Failed to get the file system unique id for file vsan://118eb054-f123-469a-d542-XXXXXXXXXXXX, using id as "remote"
Where in my case the 4th host happens to currently be the HA master. I'm guessing this was just a transient error as it hasn't reappeared in the last 30 minutes, but I'll keep an eye out for it. There was no corresponding error viewed in vCenter Server, and I seem to be able to refresh the vSAN storage counter without issue.
Thanks again.

Errors in datastore object in BI 7.0

Similar Messages

Maybe you are looking for