Errors in Message Display tool in Integration engine in Message Moni in RWB

Hi,
We are facing issues with the Message Monitoring in RWB.
When we are selecting the Integration Engine and selecting the message and then clinking on details.
We are able to see 4 tabs :
1. Message Data
2. Message Content
3. Inbound Adapter
4. Queue Monitor
Is it right to display these 4 tabs for Integration engine ?
Where will be this setting ? What tabs shud be there ?
We are using XI 7.0 SP10.
When we are selecting the Adapter Engine in Message Monitoring then we are getting Page cannot be displayed.
Please provide your precious inputs to resolve this issue.
Thanks
Ramesh

Hi Krishna,
We have restarted the system but its not working.
Adapter engine is working fine without any issues.
Only the issues are unable to view the Message monitoring as it shud be.
In Message Monitoing => Integartion Engine => Message Selected =>Click Details=> Message Display tool => Message Data Tab is fine.
Message Content Tab => if we open we are getting the following error with SAP screen.
**************************SSO logon not possible; browser logon ticket cannot be accepted
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password ****************************
Please suggest us.
Thanks,
Ramesh

Similar Messages

Errors in Message Display Tool (MDT) in Message Monitoring view of RWB

Hi mates,
<b>Issue #1</b>
When I select the message processed by an Adapter engine and click on 'Details' button, MDT window pops up and has three tabs. When I click on the tab 'Message Content' (which normally shows SOAP envelope and actuall payload) I get an error 'Content of message deleted to save memory'. I can see the content in other two tabs, Message Data and Audit Log properly though.
Whats wrong/missing? Plz clarify.
<b>Issue #2</b>
When I select the message processed by an Integration engine and click on 'Details' button, MDT window pops up and has four tabs.
When I click the the tab 'Message Content', I get cpl of warning messages 'SSO logon not possible; logon tickets not activated on the server' & 'No switch made to HTTPS; so it is unsafe to send your password'.
It gives someother info 'Choose "Log on" to continue A dialog box appears, where you can enter your user and password' When I click 'log on' and key in user credentials, it doesnot accept the correct values and after repeated attempts it says 'Either client, name, or password is incorrect; repeat logon' and doesnt show any payload.
Whats wrong/missing? Plz help me out.
I appreciate your inputs.
thx in adv
praveen

Gil,
Take a look at this thread. Should solve your problem,
Monitoring SOAP Message Payload
Regards,
Bhavesh

SQLException in the audit log for the Message Display Tool

Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?

Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
   <DT_DatosDeControl>
      <MIDDLEWARE_ID/>
      <QUICK_ID/>
      <INTERFACE_NAME/>
      <MESSAGE_ID/>
      <LOG_ID/>
      <USER_ID/>
      <SOURCE_SYSTEM/>
      <TARGET_SYSTEM/>
   </DT_DatosDeControl>
   <DT_PagoDocVentaECC>
      <VKORG>TVKO</VKORG>
      <VKBUR>TVBUR</VKBUR>
      <VKBUR1>TVBUR</VKBUR1>
      <ROUTE>TVRO</ROUTE>
      <ROUTE1>TVRO</ROUTE1>
      <BLART>Q</BLART>
      <BELNR>100</BELNR>
      <WRBTR>200</WRBTR>
      <LFART>100</LFART>
      <VBELN>100</VBELN>
   </DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong?

Problem with "Message Display Tool" PI 7.0 SP10

Dear SDN,
After upgrading PI 7.0 from SP09 to SP10 the "Message Display Tool" does not work well.
When executing:
"Runtime Workbench" > Message Monitoring > Integration Engine > Details (of a selected message) > "Message Display Tool" > Message Content
initial dynpro is displayed asking for Message ID, Pipeline, Inbound, Outb., Queue parameteres. This did not happen before, before we got Message Detail directly.
Have you had this problem? Any ideas?

Hi,
I am able to see Message Data, on clicking on Details in the Message Monitoring for the each message. I am in SP10
regards,
Moorthy

Incorrect Format message display in Message Displaying Tool of RWB

Hi,
I am not getting message payload in XML format in RWB>Message Monitoring>Message from component>Adapter Engine(database)>display.
By selecting the message>it will open the Message Display Tool(Details Display)> Goto Message Content tab>Message Part>Payload
Im not getting mesg in XML format .
Displaying as :
HEMA DEMA S1 18 1 10686 03052012 502043 6480 03052012 R2 HEMA DEMA S1 18 2 10686 03052012 502044 3750 03052012 R2
HEMA DEMA S1 18 3 10686 03052012 602695 360
How to get in XML format .

Hi Shabarish Vijayakumar ,
Thanks for quick replay.
I am not getting an proper XML payload for my ABAP Proxy to JDBC interface. I can see the message in normal format as text format.
As it should be display as JDBC receiver format structure.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MT_InvoiceInfo_Header xmlns:ns1="urn://abc/xi/abc">
<StatementName>
<SAPPrimaryInvoiceHeader action="INSERT">
<table>SAPPrimaryInvoiceHeader</table>
<access>
<BusinessUnit>abc</BusinessUnit>
<TerritoryCode />
<PurchaseCategoryCode>S1</PurchaseCategoryCode>
<SAPInvoiceNumber>0204000407</SAPInvoiceNumber>
<OrderNumber>20000426</OrderNumber>
<SAPCustomerCode>00020120</SAPCustomerCode>
<SAPDeliveryNumber>0820004404</SAPDeliveryNumber>
<SAPInvoiceDate>20120302</SAPInvoiceDate>
<NetValue>18.78</NetValue>
</access>
</SAPPrimaryInvoiceHeader>
</StatementName>
</ns1:MT_InvoiceInfo_Header>
(SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00 SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00)
Regards,
Ahmed.

Messages Display Tool XML

Hi, all
when i goto messages display tool in XML I got some different language and message is not display and error comesup 'the xml messages could not be displayed'
I am sending screenshot
http://www.flickr.com/photos/25222280@N03/2452396728/
Please help me thanks

It looks like XML document is not well formed ... Download it and open it with an XML editing tool (I personally use XML Exchanger) and see what's wrong, it will help you identifying the problem
It could be a content issue (non allowed chars in tags) or XML structure consistency issue
Rgds
Chris

Settings for enabling message security tab in message display tool

Hi Experts,
We have a scenario where we are sending data by applying web service security using SOAP receiver communication channel .
I want to check message security log along with audit log in message display tool in RWB.
Can anybody know what are the required settings to enable message security tab in message display toolin RWB?
Regards,
Sari

Hello
Check the link, [Security Configuration at Message Level |http://help.sap.com/saphelp_nwpi71/helpdata/EN/ea/c91141e109ef6fe10000000a1550b0/content.htm], which describes the steps required.
Regards
Mark

How To Turn On SYNCHRONOUS MESSAGE Viewing in message display tool

Hi everyone,
We want to view the Synchronous Messages in the message display tool using the url: http://port/messaging system/monitoring , but we are not able to do that as when we are trying to view a particular synchronous message, we are displayed the following message:
<b>"The message Bytes for this synchronous message in final state have been removed from the memory to save resources"</b>
can any one suggest what we should do to view the synchronous messages in <b>Message Display Tool.</b>
regards,
Rookie.

Hi,
U need to go to Visual Administrator:
Services | SAP XI AF Messaging:
KEY: messaging.syncMessageRemover.removeBody
VALUE: false
This way your sync messages will be viewable in AF.
Best Regards,
Daniel
Message was edited by:
Daniel Engsig-Karup

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
<b>System not configured as XI Integration Engine</b>
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

File to File ------ Message getting stuck in Integration Engine

Hi All,
I have a small issue in file to file scenario .
Once I send the file .Its getting picked up from the source directory but its not getting delivered to the destination directory.
When I check in SXMB_MONI ,message is successfully processed.
Now when I check in RWB. In Message monitring, In adapter engine its showing successful.
but for Integration engine its showing "To be delivered".
I am not able to understand the reason for this. Whether the issue is with configuration of the scenario or some other issues.
So please help me out......
Thanks,
Rohit

Hi,
Make sure you have set the MaxThreadCount parameter to 350 or higher depending of the case and of the resources available.
To increase the parameter, please follow the instructions below:
1. In the left frame choose Server -> Kernel -> ApplicationThreadManager
2. In the tab Display Configuration (right frame) choose Switch between view and edit mode to activate the edit mode.
3. The parameter MaxThreadCount must be set to 350.
4. You will then need to restart the J2ee
For reference see note #937159 - XI Adapter Engine is stuck
For specific setting to an adapter can be done by going to the Visual Administrator -> Services -> SAP XI AF Messaging
Look at the property 'Messaging connections' here you will see the following queues:
Send.maxConsumers (asynchronous sending - outbound)
Recv.maxConsumers (asynchronous receipt - inbound)
Call.maxConsumers (synchronous sending - outbound)
Rqst.maxConsumers (synchronous receipt - inbound)
Depending on where the bottleneck is occurring (i.e. too many entries in the Send.maxConsumers) you can increase these parameters.
Example of parameter value syntax (sample for FILE adapter):
(name=FILE_http://sap.com/xi/XI/System, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=10, Rqst.maxConsumers=10)
For reference see note:
#791655 - Documentation of the XI Messaging System Service Properties
And see the link:
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Regards,
Caio Cagnani

Message Display Tool Access Forbidden.

Hello,
I need to review a response from a BAPI and as I understand the only place to do this is through the RWB. I went out and looked in the Adapter Engine under Message Monitoring, but when I click on the Details button and try to go to "Message Contents" I get an Access Forbidden message.
Is my SAP user ID being passed there, and if so, what role is needed to turn this back on?
Thanks!

Hi,
>I need to review a response from a BAPI and as I understand the only place to do this is through the RWB. I went out and looked in the Adapter Engine under Message
go to:
- TCODE SXBM_ADM
- integration server config
- then add those two specific parameters:
a) runtime | logging | value = 1
b) runtime | logging_sync | value = 1
fire the BAPI and go to SXMB_MONI
Regards,
michal

Message Display Tool

I want to see the message bytes sent out from a SOAP receiver adapter using the Message monitor at: http://<server>:<port>/MessagingSystem/monitor/monitor.jsp
But the button "Display Message Bytes" button, takes to an error page that shows: "The current user has no authorization to view the message payload!"
Could you please help how to fix this?
Swatii.

Hi, Swatii,
have a look on: http://help.sap.com/saphelp_nw70/helpdata/en/43/1e1bbc5d9206fde10000000a422035/content.htm
Regards
Mickael

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception             true       Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false                 true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

Errors in Message Display tool in Integration engine in Message Moni in RWB

Similar Messages

Maybe you are looking for