Errors in Message Display Tool (MDT) in Message Monitoring view of RWB

Hi mates,
<b>Issue #1</b>
When I select the message processed by an Adapter engine and click on 'Details' button, MDT window pops up and has three tabs. When I click on the tab 'Message Content' (which normally shows SOAP envelope and actuall payload) I get an error 'Content of message deleted to save memory'. I can see the content in other two tabs, Message Data and Audit Log properly though.
Whats wrong/missing? Plz clarify.
<b>Issue #2</b>
When I select the message processed by an Integration engine and click on 'Details' button, MDT window pops up and has four tabs.
When I click the the tab 'Message Content', I get cpl of warning messages 'SSO logon not possible; logon tickets not activated on the server' & 'No switch made to HTTPS; so it is unsafe to send your password'.
It gives someother info 'Choose "Log on" to continue A dialog box appears, where you can enter your user and password' When I click 'log on' and key in user credentials, it doesnot accept the correct values and after repeated attempts it says 'Either client, name, or password is incorrect; repeat logon' and doesnt show any payload.
Whats wrong/missing? Plz help me out.
I appreciate your inputs.
thx in adv
praveen

Gil,
Take a look at this thread. Should solve your problem,
Monitoring SOAP Message Payload
Regards,
Bhavesh

Similar Messages

Errors in Message Display tool in Integration engine in Message Moni in RWB

Hi,
We are facing issues with the Message Monitoring in RWB.
When we are selecting the Integration Engine and selecting the message and then clinking on details.
We are able to see 4 tabs :
1. Message Data
2. Message Content
3. Inbound Adapter
4. Queue Monitor
Is it right to display these 4 tabs for Integration engine ?
Where will be this setting ? What tabs shud be there ?
We are using XI 7.0 SP10.
When we are selecting the Adapter Engine in Message Monitoring then we are getting Page cannot be displayed.
Please provide your precious inputs to resolve this issue.
Thanks
Ramesh

Hi Krishna,
We have restarted the system but its not working.
Adapter engine is working fine without any issues.
Only the issues are unable to view the Message monitoring as it shud be.
In Message Monitoing => Integartion Engine => Message Selected =>Click Details=> Message Display tool => Message Data Tab is fine.
Message Content Tab => if we open we are getting the following error with SAP screen.
**************************SSO logon not possible; browser logon ticket cannot be accepted
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password ****************************
Please suggest us.
Thanks,
Ramesh

SQLException in the audit log for the Message Display Tool

Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?

Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
   <DT_DatosDeControl>
      <MIDDLEWARE_ID/>
      <QUICK_ID/>
      <INTERFACE_NAME/>
      <MESSAGE_ID/>
      <LOG_ID/>
      <USER_ID/>
      <SOURCE_SYSTEM/>
      <TARGET_SYSTEM/>
   </DT_DatosDeControl>
   <DT_PagoDocVentaECC>
      <VKORG>TVKO</VKORG>
      <VKBUR>TVBUR</VKBUR>
      <VKBUR1>TVBUR</VKBUR1>
      <ROUTE>TVRO</ROUTE>
      <ROUTE1>TVRO</ROUTE1>
      <BLART>Q</BLART>
      <BELNR>100</BELNR>
      <WRBTR>200</WRBTR>
      <LFART>100</LFART>
      <VBELN>100</VBELN>
   </DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong?

Messages Display Tool XML

Hi, all
when i goto messages display tool in XML I got some different language and message is not display and error comesup 'the xml messages could not be displayed'
I am sending screenshot
http://www.flickr.com/photos/25222280@N03/2452396728/
Please help me thanks

It looks like XML document is not well formed ... Download it and open it with an XML editing tool (I personally use XML Exchanger) and see what's wrong, it will help you identifying the problem
It could be a content issue (non allowed chars in tags) or XML structure consistency issue
Rgds
Chris

Problem with "Message Display Tool" PI 7.0 SP10

Dear SDN,
After upgrading PI 7.0 from SP09 to SP10 the "Message Display Tool" does not work well.
When executing:
"Runtime Workbench" > Message Monitoring > Integration Engine > Details (of a selected message) > "Message Display Tool" > Message Content
initial dynpro is displayed asking for Message ID, Pipeline, Inbound, Outb., Queue parameteres. This did not happen before, before we got Message Detail directly.
Have you had this problem? Any ideas?

Hi,
I am able to see Message Data, on clicking on Details in the Message Monitoring for the each message. I am in SP10
regards,
Moorthy

Incorrect Format message display in Message Displaying Tool of RWB

Hi,
I am not getting message payload in XML format in RWB>Message Monitoring>Message from component>Adapter Engine(database)>display.
By selecting the message>it will open the Message Display Tool(Details Display)> Goto Message Content tab>Message Part>Payload
Im not getting mesg in XML format .
Displaying as :
HEMA DEMA S1 18 1 10686 03052012 502043 6480 03052012 R2 HEMA DEMA S1 18 2 10686 03052012 502044 3750 03052012 R2
HEMA DEMA S1 18 3 10686 03052012 602695 360
How to get in XML format .

Hi Shabarish Vijayakumar ,
Thanks for quick replay.
I am not getting an proper XML payload for my ABAP Proxy to JDBC interface. I can see the message in normal format as text format.
As it should be display as JDBC receiver format structure.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MT_InvoiceInfo_Header xmlns:ns1="urn://abc/xi/abc">
<StatementName>
<SAPPrimaryInvoiceHeader action="INSERT">
<table>SAPPrimaryInvoiceHeader</table>
<access>
<BusinessUnit>abc</BusinessUnit>
<TerritoryCode />
<PurchaseCategoryCode>S1</PurchaseCategoryCode>
<SAPInvoiceNumber>0204000407</SAPInvoiceNumber>
<OrderNumber>20000426</OrderNumber>
<SAPCustomerCode>00020120</SAPCustomerCode>
<SAPDeliveryNumber>0820004404</SAPDeliveryNumber>
<SAPInvoiceDate>20120302</SAPInvoiceDate>
<NetValue>18.78</NetValue>
</access>
</SAPPrimaryInvoiceHeader>
</StatementName>
</ns1:MT_InvoiceInfo_Header>
(SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00 SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00)
Regards,
Ahmed.

Settings for enabling message security tab in message display tool

Hi Experts,
We have a scenario where we are sending data by applying web service security using SOAP receiver communication channel .
I want to check message security log along with audit log in message display tool in RWB.
Can anybody know what are the required settings to enable message security tab in message display toolin RWB?
Regards,
Sari

Hello
Check the link, [Security Configuration at Message Level |http://help.sap.com/saphelp_nwpi71/helpdata/EN/ea/c91141e109ef6fe10000000a1550b0/content.htm], which describes the steps required.
Regards
Mark

How To Turn On SYNCHRONOUS MESSAGE Viewing in message display tool

Hi everyone,
We want to view the Synchronous Messages in the message display tool using the url: http://port/messaging system/monitoring , but we are not able to do that as when we are trying to view a particular synchronous message, we are displayed the following message:
<b>"The message Bytes for this synchronous message in final state have been removed from the memory to save resources"</b>
can any one suggest what we should do to view the synchronous messages in <b>Message Display Tool.</b>
regards,
Rookie.

Hi,
U need to go to Visual Administrator:
Services | SAP XI AF Messaging:
KEY: messaging.syncMessageRemover.removeBody
VALUE: false
This way your sync messages will be viewable in AF.
Best Regards,
Daniel
Message was edited by:
Daniel Engsig-Karup

Error messages displayed in MDT

My file from the reciever file adapter gets written properly, but i see following logs in MDT , marked in bold are the failures before the msg processing is complete. Any clues wht might be going wrong?
The message was successfully received by the messaging system. Profile: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI
Using connection AFW. Trying to put the message into the receive queue.
Message successfully put into the queue.
The message was successfully retrieved from the receive queue.
The message status set to DLNG.
Delivering to channel: CC_XXXXX
File adapter receiver: processing started; QoS required: ExactlyOnce
File adapter receiver channel CC_XXXXX: start processing: party " ", service "YYYY"
Write to file "DIR/FILENAME" as binary, size 3000 bytes
Start converting XML document content to plain text
File processing complete
<b>Exception caught by adapter framework: Error retrieving message profile fromdatabase store.
Delivery of the message to the application using connection AFW failed, due to: Error retrieving message profile from database store..</b>
The asynchronous message was successfully scheduled to be delivered at Tue Nov 14 11:30:19 GMT 2006.
The message status set to WAIT.
Retrying to deliver message to the application. Retry: 1
The message was successfully retrieved from the receive queue.
The message status set to DLNG.
Delivering to channel: CC_XXXXX
<b>Exception caught by adapter framework: Exception during resource management.
Delivery of the message to the application using connection AFW failed, due to: Exception during resource management..</b>
The asynchronous message was successfully scheduled to be delivered at Tue Nov 14 11:35:20 GMT 2006.
The message status set to WAIT.
Retrying to deliver message to the application. Retry: 2
The message was successfully retrieved from the receive queue.
The message status set to DLNG.
Delivering to channel: CC_XXXXX
File adapter receiver: processing started; QoS required: ExactlyOnce
File adapter receiver channel CC_XXXXX: Message already processed. Skip
The message status set to DLVD.
The message was successfully delivered to the application using connection AFW -

Okay, here's a couple of ideas. The "unqualified hostname" issue is because you need your fully qualified hostname (system with the complete domain name) in your /etc/hosts. For example:
23.134.30.20 mysystem mysystem.mydomain.com
I'm not familiar with the other errors. Have you configured your /etc/resolv.conf yet? It should look like:
domain mydomain.com
nameserver [IP of first DNS Server]
nameserver [IP of redundant DNS Server]
Also, make sure your /etc/nsswitch.conf is setup correctly.

Message Display Tool

I want to see the message bytes sent out from a SOAP receiver adapter using the Message monitor at: http://<server>:<port>/MessagingSystem/monitor/monitor.jsp
But the button "Display Message Bytes" button, takes to an error page that shows: "The current user has no authorization to view the message payload!"
Could you please help how to fix this?
Swatii.

Hi, Swatii,
have a look on: http://help.sap.com/saphelp_nw70/helpdata/en/43/1e1bbc5d9206fde10000000a422035/content.htm
Regards
Mickael

Message Display Tool Access Forbidden.

Hello,
I need to review a response from a BAPI and as I understand the only place to do this is through the RWB. I went out and looked in the Adapter Engine under Message Monitoring, but when I click on the Details button and try to go to "Message Contents" I get an Access Forbidden message.
Is my SAP user ID being passed there, and if so, what role is needed to turn this back on?
Thanks!

Hi,
>I need to review a response from a BAPI and as I understand the only place to do this is through the RWB. I went out and looked in the Adapter Engine under Message
go to:
- TCODE SXBM_ADM
- integration server config
- then add those two specific parameters:
a) runtime | logging | value = 1
b) runtime | logging_sync | value = 1
fire the BAPI and go to SXMB_MONI
Regards,
michal

Message display in pipeline

Hi,
How to check audit log for all processed messages ?
Thanks,
ss

Hi ss,
Check this weblog
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Message display tool can be called at
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
Ram

"Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

“Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
The error behaviour is quite irregular and does not occur for specific condition.
Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
(http://support.microsoft.com/kb/2152148)
The current version of SQL Server I am using is as below:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for the help!

Hi Mon,
The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Huey Pro calibrator- error message display measurement Error

i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7

Error message display in web dynpro application?

Hi All,
In my web dynpro application I am displaying error messages but the focus does not go to the field where error occured and also if I click on the error message it does not lead to the place of error.
And also when I navigate to another view the error message does not go.
Below is my code:
*    report message
      DATA err1_text TYPE syst-msgv1.
      err1_text = wd_assist->if_wd_component_assistance~get_text( key = '002' ).
      CALL METHOD lo_message_manager->report_t100_message
        EXPORTING
          msgid      = 'ZAA'
          msgno      = '005'
          msgty      = 'E'
          p1         = err1_text
        RECEIVING
          message_id = lo_text.
Please suggest me the way to do it.
Thanks & Regards
Archana

Hi,
I got your point.. in the BIND_TABLE( set_intiail_elemts = abap_true) change this to ABAP_FALSE.
Because of this you are gettng the intiial values. Eventhough your table has no BALNK/space records.
bind a single element
node->bind_table(
    new_items             = lt_year_list
    set_initial_elements = abap_true ).
change as
bind a single element
node->bind_table(
    new_items             = lt_year_list
    set_initial_elements = abap_false ).
You can use this code - I have tjhe dropdwon for projects event I'm doing the same.
navigate from <CONTEXT> to <PROJECT> via lead selection
lo_nd_project = wd_context->get_child_node( 'PROJECT' ).
***Gets the selected project id from drop down
if lo_nd_project is not initial.
    CALL METHOD lo_nd_project->GET_LEAD_SELECTION
      RECEIVING
        ELEMENT = lo_el_project.
get all declared attributes
    if lo_el_project is not initial.
      lo_el_project->get_static_attributes(
        IMPORTING
          static_attributes = ls_project ).
change your code to
lo_nd_year_list = wd_context->get_child_node( name = wd_this->wdctx_year_list ).
***Gets the selected project id from drop down
if lo_nd_year_list is not initial.
    CALL METHOD lo_nd_year_list->GET_LEAD_SELECTION
      RECEIVING
        ELEMENT = lo_el_year_list .
IF lo_el_year_list IS NOT INITIAL.
    get single attribute
    lo_el_year_list->get_attribute(
      EXPORTING
        name = `YEAR`
      IMPORTING
        value = lv_year ).
Regards,
Lekha.

Errors in Message Display Tool (MDT) in Message Monitoring view of RWB

Similar Messages

Maybe you are looking for