Errors in Oracle 11g R2 Grid Infra Installation

Hi all,
I went through the steps to install Oracle 11g R2 Infrastructure on RHEL 5.2 (32-bit) in a couple of Vmware machines.
- As I relied on the Vmwaretool for time sync, I didn't configure SNP.
- As I don't have a DNS server, I configured the scan-rac in /etc/hosts.
I know in production this is wrong, but for this testing env it is Ok (according to http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php)
All the configuration went Ok and the OUI went on successfully till
it reached to the last step: "Oracle Cluster Verification Utility" which, as expected, failed.
It generates the following long and complicated log: http://www.ahmedbaraka.com/temp/installActions.txt
My question is: Did all the errors in the log result only from the SNP and SCAN issues? Is there any other discovered issues?
Thanks in advance.

this could be just from ntp.
The following note might be of assistance:
CTSSD Runs in Observer Mode Even Though No Time Sync Software is Running [ID 1054006.1]

Similar Messages

Oracle 11g R2 Grid Control Installation on AIX 6

hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & Regards

user13672598 wrote:
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & RegardsHi
Grid Control is only available in 11GR1.
I have an installation walkthrough on my Blog. It is on http://managingoracle.blogspot.com in the section September 2010
There are more related Blog entries also.
Success!!
FJFranken
Edit: P.S. Welcome to this Forum
Edited by: fjfranken on 11-jan-2011 6:18

Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

Dear All,
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
Many Thanks
Nukesh

No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
Actually I found/resolved the problem and forgot about this post.
It happens that in staging my server, iptables was enabled which stopped the progress.
I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
Thanks

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86

Hi All,
I'm hoping somebody can shed some light on this issue.
I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
RESPONSE FILE:
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values.                                   ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=
# Inventory location.
INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en,en_GB
# Complete path of the Oracle Home
ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
# Complete path of the Oracle Base.
ORACLE_BASE=C:\Oracle
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
# The following choices are available. The value should contain
# only one of these choices.
# InstantClient : InstantClient
# Administrator : Administrator
# Runtime : Runtime
# Custom : Custom
#Example : INSTALL_TYPE = "Administrator"
oracle.install.client.installType=Custom
# Name : oracle.install.client.customComponents
# Datatype : StringList
# This property is considered only if INSTALL_TYPE is set to "Custom"
# Description: List of Client Components you would like to install
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.1.0 -- "Oracle Net"
# oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
# oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
# oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
# Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
#Name : MTS_PORT
#Datatype : int
#Description: Port number to be used for by the Oracle MTS Recovery Service to listen
#          for requests. This needs to be entered in case oracle.ntoramts is
#     selected in the list of custom components in custom install
#Example : MTS_PORT = 2030
oracle.install.client.oramtsPortNumber=49152
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
oracle.install.client.schedulerAgentHostName=
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
oracle.install.client.schedulerAgentPortNumber=
LOG FILE TO FOLLOW

LOG FILE:
Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
The commandline for unzip:
Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Setting Response file data to the Installer
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
INFO: Translating external format into raw format
INFO: Loaded BeanStore using the flow data source
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
ient\install\../stage/products.xml
INSTALL_TYPE Custom
INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE C:\Oracle
ORACLE_HOME C:\Oracle\product\11.2.0\client_1
ORACLE_HOSTNAME GBA-P74444432
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
.0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
et_2:11.2.0.1.0"}
oracle_install_client_OraMTSPortNumber 49152
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in SILENT mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
INFO: Verifying route INVENTORY_NO_CUSTOM_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1023.5547MB (1048120.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:130MB
INFO: Actual Value:21.3053GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <checkPrereqs>
INFO: Terminating all background operations
INFO: Terminated all background operations
WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver

Oracle 11g SOA-BPM PS3 Installation Help

I'm not a super techie, so installing the latest release from Oracle was a challenge, but I encountered a number of problems and kept notes of what I did to solve it. Many of these hints came from the Forum, but nothing had all of the relevant info under one thread. So here is what I pieced together. If this is helpful to anybody, I'd love to hear it - either on this thread or at my e-mail address of [email protected]. My thanks to Linus Chow of Oracle for some help and allowing me to think I could do this!
Comments/Suggestions on Oracle 11g SOA-BPMN PS3 Installation_
Suggest downloading all files into a common directory. I stuck this folder at the root (C:) drive. At collectively just over 5 GBs, the downloading will take several hours (for me it was a full day, as did the installation). You will need an OTN account to be able to download the software. A good overview of PS3 is at the following link: http://blogs.oracle.com/bpm/2011/01/bpm_suite_11gr1_ps3_released.html.
General comment/suggestion. Be sure to name the aforementioned folder without any spaces (big problems if this is done because of how unzipped files do/don’t work with a path name with spaces in it). As the installs get started, note that an Oracle directory (under the root) with a default name for the middleware directory, named Middleware, is created as the default.
The link with the installation is actually helpful, but it is incomplete (http://www.oracle.com/technetwork/middleware/bpm/downloads/index.html). Some of the detail needed is in the quick installation guide (http://download.oracle.com/docs/cd/E17904_01/install.1111/e14318/toc.htm, and I suggest downloading the PDF version), but the order conflicts with the previous information. I resolved this by using the latter for detail, but the former for the sequence. I also had to turn to several blogs/forums (the main one being: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html) to get help on troubleshooting problems with the installation (see below for others).
I have a Windows 7 Professional 64-bit version, but I ended up following the path for the 32-bit install path (see the main link cited above), mostly because it was unclear to me what the 64-bit path would be. I also already had the 32-bit version of the JRE installed. The following links cover identifying the differences and what you may have installed as well as alternative versions to download: http://www.java.com/en/download/faq/index_general.xml?user_os=Windows%207; http://www.java.com/en/download/faq/java_win64bit.xml; and http://www.java.com/en/download/manual.jsp.
Another general comment/suggestion. I found it useful to reboot after each step. It shut down services that I would otherwise have to search for and shut down manually. Some of the installations require services activated by previous steps to be turned off, so you’re better off doing something like this rather than encountering such an error in a subsequent step.
Step 1: Installing the XE database. The file is an .exe file, and will execute upon a double click. However, the instruction regarding RCU is best saved until the 3rd step, doing it just before you install the RCU. More importantly, there are some things to keep in mind about the database install. First, after installation, you should sign on to the DB, using the Go To DB Home Page option under the Express Edition (XE) folder or set of menu options (created as part of the installation), under the SYSTEM user account. During installation, you’ll have to have given a password for this account, so make sure it is one you can remember. After signing on as SYSTEM, give the SYS user account another (or same) password that you can remember. You will use the SYS account in subsequent steps. Second, there is a parameter for the database that must be changed from the default. This is covered in the links below: http://blogs.oracle.com/tridib_samanta/2010/03/rcu-6107db_init_param_prerequisite_failure_for_processes.html and http://cn.forums.oracle.com/forums/thread.jspa?threadID=1004605. To solve this, select SQL button on the DB home page, then SQL Commands button on the next page, paste/enter into the pane at the top the following command, “ALTER SYSTEM SET processes=300 SCOPE=SPFILE;” (but without the quotes), and then click on the Run button. (The parameter must be greater than or equal to 200, but I found references to setting in equal to 300 or 500.) Then you can log out and close the web page.
At times, the DB might not be started when you are expecting it to be running (e.g., after a reboot), which is covered in this link: Oracle 10g database homepage not working? (You’ll know that it is isn’t running if you try to open the Go To DB Home Page option and it won’t open, displaying an error page instead.) I found that the simplest way to fix this was to go to the Control Panel, Administrative Tools, Services, and then look to see if the OracleServiceXE service is started. If not, then restart by right-clicking on that service listing and choosing the appropriate option to execute.
Step 2: Installing WebLogic Server. Either before or during this process, you will need to set up an Oracle Support Account. However, you need a customer ID to be able to create a profile. I was thus not able to complete a profile, so the WLS installation defaulted to the Anonymous registration option. This still needed an e-mail address though, the same one with which you would create the Oracle Support profile, so you should have one at the ready. (It would not accept the e-mail address for my OTN account.) As far as I can tell, the consequence of this path is that I cannot automatically get patches and such. I figure this is a problem to be solved another day. The Oracle Support links are: https://support.oracle.com/CSP/ui/faq_en.html#SignIn and https://support.oracle.com/CSP/ui/flash.html.
If you go with the default, the middleware directory is just Middleware under the Oracle directory. If you select a different name or location, you will need to remember where it is and what the name is. You should also note the folder name for where the JDK was stuck, which for me was JDK160_21 under the Middleware directory.
Step 3: Installing RCU. The trickiest of the steps. Unlike with the previous two steps, this installation first happens after the downloaded file is unzipped. You MUST unzip into a directory for which the full path name (and not just the one you create upon extraction) is without any spaces. (You can use the underscore symbol instead of a space to indicate separation.) Unzip the folder/files, and then open the Command Prompt window. Using the cd command, work your way to the full path name to where you just unzipped these files. Next, continue to work your way down to subfolders created during the extraction process. You want to end up at the rcuHome\BIN\ subfolder. THEN do the RCU-related command cited in Step 1. Type in at the prompt the following command and hit enter: set RCU_JDBC_TRIM_BLOCKS = TRUE. Then, type in rcu.bat at the prompt and hit enter, which will run the installation and configuration sequence. This is realized through a series of windows that open for you to input information and make selections. Use the document at the following link of specific guidance as to what the configuration screens should have entered on them: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html. This includes things like the service name (XE) and the host name (localhost) to enter, assuming you are installing this on a laptop or PC for local use only. Some other helpful links for troubleshooting the RCU installation are located at: http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14259/rcu.htm#CIHGHDBG; http://oraclebi.blogspot.com/2010/08/rcu-and-what-it-means-for-you.html ; Re: RCU 11.1.1.4 install fails on Oracle XE and http://cn.forums.oracle.com/forums/thread.jspa?threadID=2162409&tstart=0&messageID=9336791.
The RCU sets up DB schemas and the like for the BPMN and SOA stuff. The screenshots in the previously mentioned document should be followed exactly. You can also refer to pp. 5-6 of the Quick Installation Guide. You should use the SYS user account (the default, I think), so have the password handy.
I also found it more comforting to shutdown the RCU installation/configuration via the cancel option than to keep going back a screen to fix something. This may not have been necessary, but it made me feel better. Be prepared for interim screens that pop up to show that the installation/configuration is happening, which will also tell you there are errors. One such screen says that XE isn’t supported for RCU, but you can ignore that (as the supporting guidelines indicate).
Step 4: Installing JDev. This is an executable, and you just install with all of the defaults. This process will start the WLS as part of the installation, so you must turn it off before going to the next step. Again, I just rebooted to do this.
Step 5: Installing SOA Extensions for JDev. Instructions on the page at the main link are clear and correct. The 2 screen shots must be reviewed and adhered to completely in checking off options. The first selection defines the areas where updates are to be sought out, while the second selection is from the available option(s) from those areas. In this case, you are only installing the SOA Composite Editor, though there are several other updates/extensions from which to select (but don’t, at least for now).
Step 6: Installing BPM Extensions for JDev. Same comment as for Step 5, except that the option you want to select is not as what is indicate (the BPM Composite Editor) but the BPM Process Studio! I would advise against doing these as part of the same update sequence. In fact, I closed out JDev completely (though I did not reboot) between Step 5 and Step 6.
Step 7 and 8: Installing SOA Suite. I suggest unzipping both of the downloaded zip files. Again, it is critical that the full path name into which files are extracted contains no spaces. Once unzipped, you should navigate to the Disk1 folder under the directory into which the first zip file was extracted, but you should do this with the Command Prompt window and the cd command. From this prompt, you should type in “setup.exe -jreLoc {location of JDK}” (without the quotes) and hit enter. The {location of JDK} is where the JDK was installed as part of the WLS installation. For me this was in folder JDK160_21 under the Middleware folder in the Oracle directory. Refer to pp. 12-15 of the Quick Installation Guide. This took me a couple of tries before I actually got the installation screen to show up correctly. Some of what this looks like is also in the following link: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html.
What you may eventually figure out is that 5 installation disks are stretched across two zip files. Once the installation of disks 1 and 2 are done, a popup window will ask you to browse to the folder where each of the next 3 disks are, which is in the folder created by the extraction of files/folders from the second zip file for the SOA Suite. As with previous steps, I rebooted after all of this was done.
Step 9: Installing the Business Process Converter. Unzip the downloaded file, and open the Installation Instructions Word file. It will instruct you to point JDev’s update sequence to another zip file extracted during the unzipping of the downloaded zip file for the converter. JDev will install this without much fuss or muss, but this installation is to the Studio and not to BPA. (For installation to BPA, you need to have installed BPA, and followed the other guidance in the instructions.) To get to JDev’s update sequence, follow the same first step as in Step 5, but check the option to browse for and upload from a local file. This local file will be the previously mentioned other zip file.
-------------------------------------------------

Create a new user oracle and proceed with the installation
--> useradd -g oinstall oracle
If your are forwarding your GUI using xming or vnc you would need to copy the xauth of root user and set it to oracle
[server1:root] xauth list
bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e
[server1:root] sudo su - oracle
[server1:oracle] export DISPLAY=localhost:10.0
[server1:oracle] xauth add bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e

Any error come oracle 11g r1 n 11g r2 installed in same ORACLE_BASE

Hello ,
if I had installed oracle 11g r2 in same oracle base where oracle 11g r1 was already existing,,,ll there b any problem going to occur .

Sahil Soni wrote:
Thanx Mr. Bakker ,
but as I had installed oracle 11g r1 and oracle 11g r2 in same ORACLE_BASEEach installation should be in its own directory, indicated by ORACLE_HOME. Normally, the two ORACLE_HOME directories would be under the same ORACLE_BASE directory.
my oracle 11g r1 database was not getting up but oracle 11g r2 database was connecting properly using sysdba till yesterday and today i found that oracle 11g r2 database is also not able to coonect to sysdba and giving me error
ORA-12547: TNS:lost contact.
What is the reason behind this?There could be all kinds of things going on here. What is your OS? What is the value of the ORACLE_HOME and ORACLE_SID environment variables for the process trying to connect? Are you trying to connect from the same machine that is running the database? EXACTLY how are you trying to connect?
Best if you log on to the server as an account that is a member of the DBA (ORA_DBA if Windows), then fire up a command prompt. Copy the following and paste it into your command prompt:
env | sort
sqlplus / as sysdbaThen copy the results and paste back here.

DBCA fails with java.lang.UnsatisfiedLinkError: Can't load library: /u01/oracle/prod/tech_st/product/11.2.0/db_1/oui/lib/linux/liboraInstaller.so Error in Oracle 11g

Hi,
After ORACLE 11G software installation i tried to change the ORACLE_HOME directory.
OS : RHEL 4.5
DB : 11.2.0
Previous Home Location :
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/oracle/prod/tech_st/product/11.2.0/db_1
Current Home Loc:
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/oracle/db/tech_st/product/11.2.0/db_1
When i am trying the DBCA command i am getting the below error:
[oracle@localhost ~]$ dbca
java.lang.UnsatisfiedLinkError: Can't load library: /u01/oracle/prod/tech_st/product/11.2.0/db_1/oui/lib/linux/liboraInstaller.so
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1650)
        at java.lang.Runtime.load0(Runtime.java:769)
        at java.lang.System.load(System.java:968)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:387)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:122)
        at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:201)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:492)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:266)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:240)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:189)
        at oracle.sysman.assistants.util.InventoryUtil.getOUIInvSession(InventoryUtil.java:346)
        at oracle.sysman.assistants.util.InventoryUtil.getHomeName(InventoryUtil.java:87)
        at oracle.sysman.assistants.util.OracleHome.getInventoryHomeName(OracleHome.java:1023)
        at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:798)
        at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:257)
        at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
        at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:164)
        at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:112)
        at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
Exception in thread "main" java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
        at java.lang.Runtime.loadLibrary0(Runtime.java:822)
        at java.lang.System.loadLibrary(System.java:993)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:405)
        at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:122)
        at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:201)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
        at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:492)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:266)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:240)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:189)
        at oracle.sysman.assistants.util.InventoryUtil.getOUIInvSession(InventoryUtil.java:346)
        at oracle.sysman.assistants.util.InventoryUtil.getHomeName(InventoryUtil.java:87)
        at oracle.sysman.assistants.util.OracleHome.getInventoryHomeName(OracleHome.java:1023)
        at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:798)
        at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:257)
        at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
        at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:164)
        at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:112)
        at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
[oracle@localhost ~]$
I tried all possible ways with google help but still i am facing the same issue.Kindly check and suggest to solve the issue.
Thanks in advance.
Vijay.

Hi all,
I give you the clear details about the issue what i am currently facing,
1. I installed the 11g (11.2.0) database alone(No EBS) in my local vmware machine.
2. Created my ORACLE_HOME under /u01/oracle/prod/tech_st/product/11.2.0/db_1 directory after that i tried to change my home location from /u01/oracle/prod/tech_st/product/11.2.0/db_1 location to /u01/oracle/db/tech_st/product/11.2.0/db_1 location, like created /u01/oracle/db directory and moved files from /u01/oracle/prod location.
3. I changed my bash_profile and exported home with the modified location also deregistered an old home and registered the new home.
4. When i am issuing echo $ORACLE_HOME it is showing the current home location and ORACLE_SID is same what i created before.
5. But when i am trying to create one more db using DBCA utility it is through the above error.
Please suggest me is it possible to change the location after db creation or any extra steps i have to do for this issue.
Thanks.

ODBC error in oracle 11g

Hi all.
I have installed oracle 11g release 2 64 bit on my system and also installed Informatica powercenter 9.1. the informatica repository is in oracle database. I have configured informatica perfectly since i could run workflow when connecting to flat files etc. i am having problem when i am trying to connect informatica to oracle source system and receiving following error the oracle(tm) client and networking components were not found. I read in many forums posts and realized i should install oracle client. I am encountering issues once the client is installed on my system. the issue is that my repository and integration server stops in informatica powercenter. the error log says TNS could not be resolved. then i tried to log in to database server "sys as sysdba" i am receiving error "ORA-01031: insufficient privileges ". I have done following things to resolve my error
1) checked my user is in ora_dba group
2) checked sqlnet.ora file SQLNET.AUTHENTICATION_SERVICES= (NTS)
I dont know where to start to now fix this error. I have some questions Is there a problem installing both server and client on the same machine.
Your help will be greatly appreciated.
P.s I am not sure whether this to redirected to informatica forums or oracle forums so my apologizes if i am in a wrong place.
Regards
Rajkumar

Hi Rajkumar,
I suspect you're actually using 32 bit components, as I've only ever seen the error message you've posted "oracle(tm) client and networking components were not found" come from Microsoft ODBC or OLEDB provider for Oracle, and those only come in 32 bit. The fact that they got loaded in the first place and didnt find the client indicates the process is 32 bit.
You'll first need to determine for sure whether the process that needs connectivity is 32 bit or 64 bit, then install that bit-ness of Oracle client. You can also install both a 32 bit and a 64 bit client, and in some cases you need both. If you're running it ON the database machine and already have a 64 bit database, that already includes a 64 bit client.
In either case, you can probably just go with the 11201 client.. Here's the link, click "see all" to get to the client download:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Hope it helps,
Greg
Edited by: gdarling on Oct 15, 2012 7:40 AM

Assign ACL Error in Oracle 11g R1

Hi,
     I am Using Oracle 11g Database Release 1 I have created a ACL in my Database, now I am trying to assign the acl using the below mentioned pl/sql script
begin
     dbms_network_acl_admin.assign_acl (
          acl => 'utlpkg.xml',
     host => 'domainnet.com',
     lower_port => 1,
     upper_port => 10000);
          end;
commit;
Error is
Error at line 1
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 477
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 410
ORA-06512: at line 2
The same Script I have run in another database it is working fine…
I don’t know what is wrong ….
Please advice ….
Thank You
SHAN

Please, have a look to the following metalink note
Ora-1403 When Trying to Create a Network Access Control List*
Doc ID: 854083.1*
Note, Only one ACL can be assigned to any host computer, domain, or IP subnet, and if specified, the TCP port range - from the doc here
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_networkacl_adm.htm#BABDIGJC
Furthermore, it looks like your host variable is a domain name, did you try to use a wildcard i.e. *.domainnet.com or give the exact host name ?
Nicolas.

Java Mail throws Connect failed error in Oracle 11g Enterprise Edition

Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
DEBUG: setDebug: JavaMail version 1.4.4
DEBUG: getProvider() returning javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]
DEBUG POP3: mail.pop3s.rsetbeforequit: false
DEBUG POP3: mail.pop3s.disabletop: false
DEBUG POP3: mail.pop3s.forgettopheaders: false
DEBUG POP3: mail.pop3s.cachewriteto: false
DEBUG POP3: mail.pop3s.filecache.enable: false
DEBUG POP3: mail.pop3s.keepmessagecontent: false
DEBUG POP3: mail.pop3s.starttls.enable: true
DEBUG POP3: mail.pop3s.starttls.required: false
DEBUG POP3: mail.pop3s.apop.enable: false
DEBUG POP3: mail.pop3s.disablecapa: false
DEBUG POP3: connecting to host "194.42.133.180", port 110, isSSL true
javax.mail.MessagingException: Connect failed;
nested exception is:
     javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:210)
     at javax.mail.Service.connect(Service.java:295)
     at javax.mail.Service.connect(Service.java:176)
     at GetNoonReport.Connect2Mailserver(GetNoonReport:338)
     at GetNoonReport.ReadMail(GetNoonReport:103)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:501)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
     at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:507)
     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:238)
     at com.sun.mail.pop3.Protocol.<init>(Protocol.java:107)
     at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:261)
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:206)
     ... 4 more
Is Oracle Enterprise Edition supports "POP3S" protocol?, Or Enterprise edition needs any additional configuration for establishing outlook connection with "pop3s" ?.
Any help is appreciated
Regards ,
Nisanth

907833 wrote:
Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
I suspect root cause is with Java not Oracle.
Oracle RDBMS does NOT speak any "protocol" except SQL natively.

Error connecting oracle 11g through SQL Developer

i am using SQL Developer to connect to oracle 11g which is installed to another machine in same network
means i am using a client machine to get connected to oracle installed to host machine through SQL Developer
iam getting this error
network adapter could not establish the connection
vendor code 170002
my listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-zoheb.PCSTECH.COM)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-ansari.pcstech.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
iam not understanding what is problem
please somebody help

I would say it's vendor code 17002 (not 170002). And such a message is thrown by SQL Developer , unfortunately very generic for any kind of connection problems.
Start sqlplus and try to connect, very likely you get a better error message.
Recently I had such a connection problem and the reason was - No Listener.
Werner

Error INstalling Oracle 11g on Windows8 64 bit

Hi Geeks,
I have windows 8 64 bit sony Via system.
I want to install oracle 11g on it.
I have downloaded the setup in my E:\Oracle 11g setup.
Now I get two folder post unzipping the two archivwe files
E:\Oracle 11g setup\win64_11gR2_database_1of2\
E:\Oracle 11g setup\win64_11gR2_database_2of2
Now the doubt that I have is there are database folder in each of the two folder , so is it necessary to copy and paste database folder from second directory I,e *"E:\Oracle 11g setup\win64_11gR2_database_2of2"* into the first directory...for continuing with the installation ???????????
Please respond

Hkag wrote:
Thanks Guys for your response..I have managed to install 11g on my system and runnig the queries succesfully now..
What i did is :
1] Created a new folder "oracle Install".
2]ctrl+ selected both the zip files i had downloaded from Oracle site and then uncompressed them into "oracle Install".
3] then ran the setup from Oracle Install...
while doing this process also i got warning lime system dosent meets the requirements....but continued with the installation and it ran succesfully...
what was different this time was previously when i had not done above 3 steps installation would fail saying some of the .dll files not found...but after this approach no file not found issues came...
Lucky to have it installed ...
If you consider it lucky to be running on an certified OS, where every issue you may run into will mean having to hack your own solution.
When IBM upgraded their COBOL to COBOL-85 they warned that - due to very tight linkages between the compiler and the OS - if we remained with the older compiler "everything will continue to work as before, until such time as it doesn't".
I'd say that's a very close analogy, and for exactly the same reasons. Tight linkage between the product and the OS. You hacked an installation, so things will work .... until such time as they don't.
Would want to install a VM ware on my system and then Linux OS..then try installing Oracle on it too..

Need steps for Installing Oracle 11g R2 Grid Infrastrucure in Suse Linix 10

Hi,
I have system with Suse Linux 10 (64-bit), in that i need to install the Oracle 11 R2 Grid Infrastructure for
1. Grid Computing
2. ASM Cluster.
Can any one please provide the Step by step installation to me.
Thanks With Regards
Baalaji V

Ideally, you need two nodes to install a RAC. If you have only one system and trying for practice, you can do it with Virutal machines(VM) or create it as single instance.
You can refer Oracle documentation on Grid install and postings in the internet about Grid install in using VM.
Ashok

Installation error for oracle 11g

Hi
Unable to login to the oracle homepage like https://localhost:portno/em (I jus gave an ex, after installation I got the url).
Its just shows certificate error even though I tried for trusted connection.
It means it displays a blank page.
Can anyone help on these.
Nithesh Raj

Hi
SYSMAN account status is open.
DBCONSOLE in services is up, however when I check dbconsole status it is showing it is not defined.
How can we define it.
Log file of clsc:
2012-08-21 12:55:36.318: [ default][2960]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][2960]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
log file of css:
2012-08-21 13:21:43.382: [ GIPCNET][1728] gipcmodNetworkAsyncComplete: [network] error for endp 000000000A4FCB90, req 000000000A4F55D0, type sgipcnreqtypeConnect (1), data 0000000000000000, sret sgipcretConnectionRefused (28)
2012-08-21 13:21:43.382: [ GIPCNET][1728] gipcmodNetworkAsyncComplete: slos op : sgipcwWait
2012-08-21 13:21:43.382: [ GIPCNET][1728] gipcmodNetworkAsyncComplete: slos dep : The remote computer refused the network connection. (1225)
2012-08-21 13:21:43.382: [ GIPCNET][1728] gipcmodNetworkAsyncComplete: slos loc : GetQueueComp
2012-08-21 13:21:43.382: [ GIPCNET][1728] gipcmodNetworkAsyncComplete: slos info: failed for over 000000000A4FB7F0
2012-08-21 13:21:43.382: [ CSSCLNT][1728]clssscConnect: gipc request to clsc://(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61100)) failed with 29 (0000000000000013)
2012-08-21 13:21:43.382: [ CSSCLNT][1728]clsssInitNative: connect to (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61100)) failed, rc 29
Thanks for the help.
How can we solve it.
Edited by: Nithesh on Aug 21, 2012 5:31 AM
Edited by: Nithesh on Aug 21, 2012 5:33 AM

Errors in Oracle 11g R2 Grid Infra Installation

Similar Messages

Maybe you are looking for