Errors in Pkgbuild Vmware - how to comunicate them ?

I have installed the vmware ws 5 pkgbuild from AUR and found there are 2 things wrong with it, but was able to solve them.
What is the best way to communicate the changes to other archers or the maintainer ?

Post a comment on the relevant page in the AUR and/or mail the maintainer.

Similar Messages

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

I downloaded some apps for my ipho in the apptrackr site, the apps are shown in my itunes library but when i try to sync those apps at first it works and then it says an error occur (0xE8008001). How can I sync them without the error?

I downloaded some apps for my ipho in the apptrackr site, the apps are shown in my itunes library but when i try to sync those apps at first it works and then it says an error occured (0xE8008001). How can I sync them without the error?

If your phone is jailbroken, we can't help you, as already stated.
If you're new to this and you're trying to download apps to put on your phone and it is NOT jailbroken, you can't do that.
You must go through the iTunes app store.

I kept having errors on my Apple ID with frostycup=1 and STATUS_CODE_ERROR. How to troubleshoot them?

How to troubleshoot them and eliminate the frostycup=1 and STATUS_CODE_ERROR.

Hey Lee,
To make sure we are on the same page you are trying to access and download content the Mac App Store. From the time of your post, I do know that the multiple online stores were having issues with accessing content. Any time you have issues with connecting to any store, take a look at the link below to check the status of all of Apple’s services. If you cannot access that content now let me know.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Take care,
-Norm G.

My iphone says I have 331 songs but only 139 can be played...where did the others go? How to get them back?

The songs disappeared from two computers and are grayed in on my iphone...I cannot play 192 songs...how to get them back or how to delete them from my phone so I can start over? I do not want icloud...I synced my phone to the computer and everything was fine for awhile...where did the songs go?

Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

Iso5 download error, network timed out, how do i stop this, all of my firewalls and security on my pc are currently swiched off but this still didnt help

iso5 download error, network timed out, how do i stop this, all of my firewalls and security on my pc are currently swiched off but this still didnt help>
trid multiple times over the last few weeks, after waiting 45 minutes for the download to comlete the network times out whilst processing the download

The router is in your house.
In a nutshell, a modem communicates with the Internet and brings a single communications link to your house, The router takes that single link and divides it up among many links, both wired and wireless, to support many devices in your house. The router and the modem may be separate physical boxes or, more commonly, they're in the same enclosure.
Unfortunately, if there is a firewall in the router, you will need help. I don't think that it's a good idea to try to walk you through it via the forum. You should contact the router supplier and have them walk you through the investigation.

Processchain errors in Production and how to solve those issues

Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks

Hi
Table of Contents
1.     Time stamp error     2
2.      PSA error records     4
3.      SID not found for characteristic     7
4.      Error calling number range object     8
5.      Trfc error     10
6.      ALE REMOTE lock     13
7.      Delta fails     14
8.      Deleting setup table     18
9.      How to run statistical setup for different Application components     19
10. How to do selective deletion     22
11. Roll up     24
11. Compression or collapse     25
12. How to do Attribute change run     27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a.     Remove failed request from data target by making its QM status into red.
b.     Check into sm12 and delete the lock, usually the BASIS deletes them
c.     Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.

How to migrate Themes, HTML templates, MIME objects to ECC6.0

Hi Friends
How to migrate Themes, HTML templates, MIME objects which are developed in SAP Web@Studio.
or How to use program SIAC_UPLOAD ??
regards
siddharth

Hello Murray,
Your steps sound correct. I would add that you generally need the following:
1. publish the IAC, SYSTEM, and WEBGUI Internet Services (also from SE80)
2. make sure the Integrated ITS is working. Meaning you should activate the ITS in the profile parameter, this can be seen in transaction SITSPMON. Some services in transaction SICF also need to be activated, like the default_host/sap/public/bc/its
From your error message though it looks like the URL you have used is either incorrect or you have used the External Alias feature in SICF? The URL for the ITS is usually http://host:port/sap/bc/gui/sap/its/service. Second, the error is about a language resource file (.htrc), you have not specified if you created one or not. To create one in the language you are logged in with just go to SE80, open your Internet Service and double click on the "Topic xx". Don't forget to publish after creating and saving it.
Edgar

The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

Your error code falls within the 10-47 range mentioned here.
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device
Related errors: 1015, “The required resource can't be found.”
You might see these error messages if your device has a beta version of iOS or if you're installing an older version of iOS (downgrading). Use recovery mode to restore your device to the latest version of iOS.
Quit virtualization software
Quit any virtualization software (such as Parallels or VMware) that’s running on your Mac. Then use the latest version of iTunes to restore your device.

When trying to share to idvd it shows 'project could not be prepared for publishing due to error (-34) - anyone know how to correct this?

When trying to share to idvd it shows 'project could not be prepared for publishing due to error (-34)' - anyone know how to correct this?

Hi
Error -34 disk full
• Free space on Your Start-Up (Mac OS) hard disk. How much ?
• Any other hard disk as target for movie project ? Free space on this/them ?
Yours Bengt W

How to install themes to Nokia N70

can you help me how to install themes??
When I download themes from web, over pc and try to install them on my mobile phone
It says "Installation Security error, unable to install"
please help

try installing another theme..if it is working..maybe sis file is theme is not compatible..
some aint missing a good thing til its gone...

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

My all voice memos are deleted,how to retrieve them

my all voice memos are deleted after syncing it with itunes...how to retrieve them ??

Thanks Bro. I have backup. and I did the same thing twice but only 26 contacts appear on the device. Now again yesterday after your suggestion again I restored the device but the result was same. Then I thought a new thing. I restored the device one more time but after restoring I didn't configure the icloud account. Surprisingly all my old contacts are there in the device but those 26 contacts are not there. Now I will tell you how this must have happened? I had 3gs earlier. that was stolen 3 months ago. I put the device in lost mode. I purchased new iphone4. I restored with itune. All my data came back. After that I saved these 26 new contacts to my device which also saved in icloud but when I tried to backup on my pc it was not happening. the messege coming device disconnected. 2 days back my stolen device came online. Lost mode was activated by icloud. But what I think in between that time the other fellow must have deleted the phone contacts. And as per icloud also deleted the same. Only the 26 contacts which I saved in these 3 months remained in icloud. Now bro can u help me out? What I should do? I have 26 contacts in icloud and < 500 in my device. I don't understand when all other Co's mobile you can import contacts from any backup file iphone can not. This is the DRAWBACK OF IPHONE.

I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some but not all are also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

Errors in Pkgbuild Vmware - how to comunicate them ?

Similar Messages

Maybe you are looking for