Errors in R3AM1 / Block size is not increasing / Status wait (data from ECC TO CRM)

I got above error in R3AM1, How to fix this????? Please any body tell me clearly step by step 

Hi Raj,
The error guid_for_logsys_changed raised occurs when the logical system entries are changed for either products or customers.
clear the CRMMLSGUID table. It will be filled with the correct value again when you perform a new initial load (which you will have to do of course).
To delete a table entry in a system without a maintenance view proceed as follows:
1) Start Transaction Se16
2) Enter CRMMLSGUID as the table name and hit enter
3) Enter /h (debug mode in the command field)
4) Mark the line and hit F7
5) Hit F7 again
6) Double-click on the variable "code". At the bottom of the screen the value SHOW will be populated. Change this to DELE and press the little pen to the right (modifying the variable value).
7) Hit F8
The CRMMLSGIUD table should now be empty.
Again re-run the initial load for CND_ALL and try. It will work.
thanks
VS

Similar Messages

  • LSMW-IDOC error while tranferring data from ECC to CRM

    Hi,
    We got an error
    Error status 'A' calling validation service.
    Validation error occured: "Module CRM_BUPA_MAIN_VAL, B Doc type BUPA_MAI".
    When we are doing LSMW with IDOC in CRM.
    Please provide ur valuable help in this problem.
    Thanks & Regards
    Sriram Tumuluri

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Error in BP Mapping from ECC to CRM 5.0 -Specify a card type error

    Hi gurus,
    I have taken
    *Specify a card type-Message no. R1561*
    error in case of mapping cust_main data from ECC to CRM 5.0. When I check the selection result of Bdoc messages by getting SMW01 facing with above this error.
    Could you please help me to overbeat this error in a quick way in order to map properly...
    Thanks so much
    Best regards,
    Fahrettin Kerem BOZBIYIK

    Hi Kai,
    Firstly thank you for your notes notification!
    That's right symptom is right over there but in our ECC system my related customer has no credit card type data in payment cards data tab so that why would I have taken the Bdoc validation error occasionally in case of mapping process to CRM 5.0 such as I mentioned?...
    Best Regards,
    FKB

  • Chart size does not extend with the data

    Hi,
    One of my reports has a horizontal bar and the chart size does not grow with the data. The chart displays fine if I have minimal amount of data. If the data grows, the display is bizarre, it's just messed up. Is there an option I need to set? Please provide your inputs.
    Thanks
    Arch

    Hi,
    I tried with all these options, but no success. I remember I used to get full visible charts initially. Not sure what has happened charts are getting chopped off by at least 50px right and bottom. Interestingly When I export the chart to Excel it looks perfect.
    Any suggestion. Has anyone faced this issues. I am using 11.1.1.5 version.

  • Error at the time of MIGO- not reading the excise base from invoice

    hi gurus
    when we do inward the material during sto using migo, the following error occurs Error at the time of MIGO- not reading the excise base from invoice
    kindly suggest right answers to overcome this?
    with regards
    baalakrushnan.da

    hi,
    Go to logistics general and see whether for the excise group migo settings are maintained.
    See for the material in depot chapter id and excise indicators are maintained ie J1ID.
    since depot also considered as plant so the chapter id and plant combination has to be maintained.
    Regards
    Saju

  • How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

    I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
    I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
    The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
    Thanks!

    Probably you are running out of disk space. Can you interact with your Mac at all, or is the error  message preventing you from using Finder windows?
    I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
    When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
    How much free disk space do you have right now?
    See:
    http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
    If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
    Regards
    Léonie

  • I have an Apple Configurator install that wont recognize an iPad when I attach it via USB.  I cant prepare it or refresh it.  It was supervised.  I get an error message that says "policy does not have correct profile data".  Please help!!!

    I have an Apple Configurator install that wont recognize an iPad when I attach it via USB.  I cant prepare it or refresh it.  It was supervised.  I get an error message that says "policy does not have correct profile data".   At some point there was a mismatch between the profile on the iPad and the MAC server.  The profile on the MAC server has been deleted and the iPad has been erased and reset to default.  I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it.   Please help!!

    Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
    Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
    Hit the return key.
    If you get no error message, it worked, and you can quit the app.

  • "Could not get the audio data from the file" error

    Hi
    I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
    I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
    Where can it come from ?
    Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

    Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

  • Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

    Hi I cant install the Management Console.
    I keep getting
    Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
    Has someone come across this problem before?
    I am using
    MS Server 2008 Std x86
    SQL Server 2005 SP2 Std x86
    MDOP 2008 R2
    APP-V 4.5
    Please can someone help.
    Thanks

    I'm running into the same problem myself, I have an almost identical setup.
    Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
    Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
    Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
    Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
    Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
    1
    [2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''. 
    2
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''. 
    3
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''. 
    4
    [2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff. 
    5
    [2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\ 
    6
        Copyright (c) Microsoft Corporation.  All rights reserved. 
    7
    8
        Description: 
    9
            This script creates all user-defined messages. 
    10
    11
            The types of messages allowed (and their severities) are: 
    12
            FATAL   - SQL Server Severity = 17; ours = 1 
    13
            ERROR   - SQL Server Severity = 16; ours = 2 
    14
            WARNING - SQL Server Severity = N/A; ours = 3 
    Can anyone help me shed some light on what's going on here?

  • REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

    HI CRM Experts,
    I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
    I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
    Kindly let me know what am I missing out.
    Regards,
    Ravindra Valy

    Hi,
    I had applied the not earlier itself.
    Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
    After applying at ECC end, the problem is resolved.
    Thanks
    Ravindra Valy

  • Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

    Hi All,
    I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
    The following Errors/Warnings occured. Do you want to continue?
    Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
    DNL_CUST_PROD0: Object will not be loaded
    After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
    Please help me fixing the issue.
    Thanks in Advance.
    Cheers,
    Rj

    Hello RJ,
    Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
    R3AI_DNL_CUST_PROD*.
    Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
    Then try to re-load the object.
    I do not see any other reasons for the above error message.
    Best Regards,
    Shanthala Kudva.

  • Upload data from excel to crm using BDOC possible or not

    Hi all,
    I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

    BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
    If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
    Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
    1. Read data
    2. Convert data
    3. Generate idocs
    4. Post idocs
    Once the posting of idocs happen error-free, the data will be available in crm system.
    Another method will be using transaction SECATT.
    Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
    Reward with points if this helps.

  • Not able to query data from View

    Hi,
    I am not able to fetch data from views even while running simple select statements. I am using SQL Developer Version 3.0.04,
    Same query is fetching data on other computers running SQL Developer or Toad.
    Has anyone faced this issue??

    Is that the first version ever you installed? You unzipped in a clean directory, right?
    What OS/JDK/DB versions?
    So do you get an error or what?
    K.

  • Error while loading data from ECC to BI

    Hi BW Experts,
    while loading data from ECC 6.0 to BI  i got error in details tab of the infopackage as datapackage 1  arrived in bw processing not yet finished.
    Could any one help me out?
    Thanks

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Business partner(employee) is not replicated from ECC to CRM

    The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

    Hi Pragnya,
    This is the case where at the time of creation of BP there was some issue with replication.
    The BP itself is not there in CRM or only the changes are not reflected?
    In such scenarios, perform following steps for successful replication:
    1. Go to TCode: CRMM_BUPA_MAP
    2. Enter the BP no. {initially it says it does not exist}
    3. Enter ERP customer no. and press enter, the BP GUID gets filled
    4. Click on "Gather Information about customer" [you can see the status of the object]
    5. Now again enter the BP no. -> The customer is available in CRM now.
    Regards,
    Swagi

Maybe you are looking for