Errors in recovery when I switch on laptop

sir plz help me. there is a problem In my lap hp pavilion g6 2103 tu. recovery errors major problem. what we 'll do????
This question was solved.
View Solution.

Hello sathishhs,
I am confused as to why you marked your reply "Windows corrupted" as the solution?
You can try running a Hard Disk Test procedure first if you have not done so.
But...
The error message "Boot Device not found 3FO" means the hard drive has most likely failed and will have to be replaced.
You would need to contact HP Support for your area if the machine is still under warranty.
Contact HP Worldwide | HP® Official Site
Otherwise you will need to replace the hard drive yourself. Also, you will need to purchase the recovery disks if you have not burned them yourself already.

Similar Messages

I am using a mac book pro with Leopard OS. when I switch my laptop on it flashes a grey folder with a question mark on a grey screen, after the chime. I have tried all the things mentioned in another discussion. none of those have helped. HELP! im scared.

what must i do? im a student and dont have backup for my work. Im in desperate need of a solution where i wont lose my work from my desktop.

You need to purchase Leopard if you don't have the DVD and reinstall OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Error code -69 when trying to sync laptop to ipod

Hey there,
I just got my nano (2nd gen) and first time it sync'd just fine. I bought some itunes and set up some podcasts and now everytime (5+) I connect the two I get:
Attempting to copy to disk 'My Ipod' failed. An error code occured (-69).
I've restarted everything and re-installed iTunes.
Any help you could provide would be greatly appreciated!
rab

Error -69 means the song/s that was selected for syncing is un-usable, there should be an error message that tell you which song is un-usable or corrupted. You have to re-download the song from the source or delete it.
If re-download still does not work, convert it using iTunes to iPod version.
Or select the song ,
click Advanced on the top Menu
Select Create iPod version.
Then sync again
Good Luck!

IPod Touch stuck in recovery mode, error message 1611 when trying to restore.

I bought a 2nd generation ipod touch from someone on CL and it appeared to me that it just needed to be plugged into the computer and be synced with itunes. But its stuck in recovery mode. When I plug it into my computer, itunes says it sees the ipod is in recovery mode and needs to be restored. Sout t I click on restore and it tries to restore it, but then it stops in the process and gives me error message 1611. I looked up this error message and it has to do with system security. I messed with my security settings and I still get this message. I tried using my home computer instead of my laptop and it still gave me the same message. Ive also tried holding down the power and home button for several seconds and it still goes back to recovery and gives me the same error message when I try to restore it. Also, itunes recognizes my ipod, but my computer does not.. Can anyone help me? Do I just have to bring the ipod into an apple store and have them figure it out? Thanks in advance!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Have you tried what is in bold

My iphone 4 is updated to ios 7 and now it is always on recovery mode when i switch it off, my iphone 4 is updated to ios 7 and now it is always on recovery mode when i switch it off

my iphone 4 is upadated to ios 7 and now it is always on recovery mode when i switch it off

Hi tori_42,
If you are having issues with WiFi on your iPhone, you may find the troubleshooting steps in the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
If WiFi settings are completely inaccessable because they are dim or greyed out, you find this article more useful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

Israr,
Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure. You should run Battery Check in HP Support Assistant.
Wes
I am an HP employee.

When I switch from ios 6 to ios 7 my iphone 4s asking to I tunes to update an taking 10 hours and than give me error 3194 what can I do?

When I switch from ios 6 to ios 7 my iphone 4s asking to I tunes to update an taking 10 hours and than give me error 3194 what can I do?

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Error code 32768 when trying to use recovery disks

does ayone know what an 32768 error code is when trying to load recovery disks and how to solve it will not load windows from ram drive any help is appreciateded thanks... bobby

Hello,
Clear now. Your created recovery disk will not be supported on your unit. You need original HP recovery kit (708649-DH1) to recover your unit. Please share privately your name/address/phone and RCD kit will be shipped to you.
I am an HP employee.

When restarting my HP laptop, it's showing Hard Disk error.

when restarting my HP laptop, it's showing Hard Disk error. I have already done two time formatting. But it's still there. please suggest me what to do?

Edited to avoid duplicate post
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT201210 when i switch on my iphone4 i will get message connect to the itune.and when i restore my iphone4 i will get error.

whene i switch on my iphone i will get message on my disply connect to the itune,whene i connect my iphone 4 to the itune and restore i will get error.plese help me to solve this problem.

Try to connect to iTunes during the setup.

Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

My iphone says an unknown error occurred (9) when trying to restore in iphone recovery mode

my iphone says an unknown error occurred (9) when trying to restore in iphone recovery mode

Hey there ejs11201,
I see that you are getting an error code when attempting to restore your iPhone. Here is an article that addresses that specific code with some troubleshooting steps and will help you resolve the issue:
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
https://support.apple.com/en-gb/TS3694
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I get error code 6 when i try to reinstall cs4design premium back onto my laptop

i get error code 6 when i try to reinstall cs4design premium back onto my laptop
anyone know what i should do? i need this for work

seen mant treads on error code 6
https://forums.adobe.com/search.jspa?sort=updatedDesc&q=Error+%22code+6%22&place=%2Fplaces %2F1413024

My ipod works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this?

Hi, my ipod nano works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this? Thanks

Take the iPod N ano to your local Apple Store or an AASP to be examined.

Errors in recovery when I switch on laptop

Similar Messages

Maybe you are looking for