Errors in SMW01 as Customer Group Does not Exist.

Hi,
While monitering the Errors in Tcode SMW01.
There is an error as "Customer group 55 does not exist".
So please help me.
regards,
divya.

Hello murali,
      My problem is there is an error in SMW01 as customer Group 55 does not exist .
when i checked in R/3, thecustomer group is maintained ,but its not maintained in CRM .
So i need to solve this and reprocess the BDOC.
SO there are two procedures for this:
1>where we can download the DNL_CUST_SALES through the Tcode R3as and
2>where we maintain the customer Group in CRM Production system directly   OR
Since i don't have Authorisation for change or creat ,so i maintained the customer Group in Development client and transported to Quatlity.
Please let me no whether this correct or not.
thanks andregards
Divya

Similar Messages

  • Error - Account group  does not exist, check classification assignment

    Hi Guys,
    I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
    Bdoc Error - Account group  does not exist, check classification assignment
    i have completed all the required configuration as below
    Setup of no range for BP and assigned to grouping
    PIDE settings in R3
    Setup if account identification profile in IS solutions
    Thanks,
    Nitin

    Nitin,
    Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

  • Error: Tax cod OI country IN does not exist in procedure TAXINN

    Hi all,
    while posting invoice, i am facing an error
    "Tax code OI country IN does not exist in procedure TAXINN"
    I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
    I think i missed some thing in the configuration part. Please guide me.
    Thanks!
    Pavan

    Hi,
    1. If tax is deducable in nature means if you are using CIN then assigm Tax code
    SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
    here assign tax code with company code .
    2. If while doing miro you are getting Tax Code" VN" Instead of OI
    then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
    You can use data base tables also for your Tax code if you know tax conditions used there
    T Code : SE16
    Table : A363
    A358 Country/Plant/Ctrl code/Material
    A357 Country/Plant/Ctrl code
    A362 Country/NBM-NCM Code
    A971 Tax Code
    A359 Plant/Matl group
    Hope Help u !
    Regards,
    Pardeep Malik

  • Error message: Entry 1 WC 99 does not exist in T508A (check entry)

    Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error.  In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
    I went to the table using se16 but could not make out how I can input those entries in the table....
    Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

    you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

  • User or group does not exists.

    Hi,
    I am running an unattented installation of SQL on a server. I run it with the following configuration:
    ;SQLSERVER2008 Configuration File
    [SQLSERVER2008]
    ;************************* CORE ARGUMENTS *************************
    ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. 
    INSTANCEID="MSSQLSERVER"
    ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. 
    ACTION="Install"
    ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
    online, Business Intelligence Development Studio, and other shared components.
    FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
    ; Setup will not display any user interface. ***
    QUIET="True"
    ; Needed argument for silent installation
    IACCEPTSQLSERVERLICENSETERMS="True"
    ;*************************** OPTIONAL *****************************
    ; Displays the command line parameters usage 
    HELP="False"
    ; Specifies that the detailed Setup log should be piped to the console. ***
    INDICATEPROGRESS="True"
    ; Setup will display progress only without any user interaction.
    QUIETSIMPLE="False"
    ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. 
    X86="False"
    ; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
    ENU="True"
    ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. 
    ERRORREPORTING="False"
    ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. 
    SQMREPORTING="False"
    ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
    Services (RS). 
    INSTANCENAME="MSSQLSERVER"
    ; Agent account name 
    AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Auto-start service after installation.  ***
    AGTSVCSTARTUPTYPE="Automatic"
    ; Startup type for Integration Services. 
    ISSVCSTARTUPTYPE="Automatic"
    ; Account for Integration Services: Domain\User or system account. 
    ISSVCACCOUNT="NT AUTHORITY\NetworkService"
    ; The name of the account that the Analysis Services service runs under. 
    ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Controls the service startup type setting after the service has been created. 
    ASSVCSTARTUPTYPE="Automatic"
    ; The collation to be used by Analysis Services. 
    ASCOLLATION="Latin1_General_CI_AS"
    ; The location for the Analysis Services data files. 
    ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
    ; The location for the Analysis Services log files. 
    ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
    ; The location for the Analysis Services backup files. 
    ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
    ; The location for the Analysis Services temporary files. 
    ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
    ; The location for the Analysis Services configuration files. 
    ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
    ; Specifies whether or not the MSOLAP provider is allowed to run in process. 
    ASPROVIDERMSOLAP="1"
    ; Specifies the list of administrator accounts that need to be provisioned. 
    ASSYSADMINACCOUNTS=”CRB\dsstest”
    ; Startup type for the SQL Server service. 
    SQLSVCSTARTUPTYPE="Automatic"
    ; Specifies a Windows collation or an SQL collation to use for the Database Engine. 
    SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
    ; Account for SQL Server service: Domain\User or system account. 
    SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS=”CRB\dsstest”
    ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). 
    FILESTREAMLEVEL="0"
    ; Set to "1" to enable RANU for SQL Server Express. 
    ENABLERANU="False"
    ; Specify 0 to disable or 1 to enable the TCP/IP protocol. 
    TCPENABLED="1"
    ; Specify 0 to disable or 1 to enable the Named Pipes protocol. 
    NPENABLED="0"
    ; Startup type for Browser Service. 
    BROWSERSVCSTARTUPTYPE="Automatic"
    ; Specifies which account the report server NT service should execute under.  When omitted or when the value is empty string, the default built-in account for the current operating system.
    ; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
    ; The domain part of RSSVCACCOUNT is a maximum of 254 characters long. 
    RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Specifies how the startup mode of the report server NT service.  When 
    ; Manual - Service startup is manual mode (default).
    ; Automatic - Service startup is automatic mode.
    ; Disabled - Service is disabled 
    RSSVCSTARTUPTYPE="Automatic"
    ; Specifies which mode report server is installed in.  
    ; Default value: “FilesOnly”  
    RSINSTALLMODE="DefaultNativeMode"
    ; Full-Text filter launcher service account
    FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
    I run the installation with the user crb\dsstest, but i get the following error:
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message: 
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data: 
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack: 
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message: 
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Can anyone help me?

    Hi,
    I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
    The following are the error details:
    2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
    2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
    2011-12-28 12:58:47 AS: Action: Validating Account
    2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
    2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
    2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
    2011-12-28 12:58:47 AS: Result: Error
    2011-12-28 12:58:47 AS: Result: Invalid
    2011-12-28 12:58:47 AS: Result: (Validation) Complete
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
    2011-12-28 12:58:47 AS: Data:  Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
    2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Result: (Utility) Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
    2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
    2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
    2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
    2011-12-28 12:58:47 AS: Result: (Utility) Success
    2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
    2011-12-28 12:58:47 AS: Result: Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Validating Start Mode
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Action: Validating Allow in Process
    2011-12-28 12:58:47 AS: Data: AllowInProcess=1
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: ----------------------------------------------
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message:
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data:
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack:
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message:
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Do you need more information then above? The above chech do not fail for the network service:
    2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
    2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
    2011-12-28 12:58:46 ACE: Validating service account is not LocalService
    2011-12-28 12:58:46 ACE: Validating service account is a user account
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
    2011-12-28 12:58:46 AS: ----------------------------------------------
    2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
    2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
    Do you have any idea what is worong?

  • Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

    Hi All,
    Iam getting error message while creating intercompany sto PO in my QA clinet.
    (Customer PC3000 does not exist (please change entry in plant 3000)
    Vendor maintained both the plant(supply and receeving plant)
    Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
    I had checked OMGN t-code setting looks good.
    Same setting I had tested on DEV and SANDBOX its wokring fine.
    Please help me out how to solve this problem
    Thanks
    Raj K

    Hi,
    I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
    This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
    Regards,
    Onkar

  • Error TF10175 The FMS team project does not exist

    We are using TFS and Visual Studio 2013. TFS was working fine for me. However we have to do some Java development and also wanted that code in source control in the project.  I was the lucky one (or not) volunteered to head this up.  I installed
    Eclipse and the TFS plugin for Eclipse now I am unable to use Visual Studio 2013 and the Source Control explorer to open other .Net based pieces to the solution without getting the following error:
    Error
    TF10175: The FMS team project does not exist.
    This only happens for me and since I installed the Eclipse TFS Plugin.  I also get the error when I try to get the latest code.  Is there an issue in using the TFS plugin for Eclipse and Visual Studios?
    R. K. Walters

    Hi Walters,  
    Thanks for your post.
    As you’re using TFS Eclipse, I moved this post to TFS Eclipse and Cross Platform forum for the better response.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Group does not exist

    Hi!
    I´m in a upgrade from version 4.6C to 6.0, and i'm checking the bases of costing sheet because i can´t calculate overhead. The group of cost elements appears in the selection list, but when i want to assign it the system says: "group does not exist"!!! but this is not true, it exists in the system.
    Somebody helps me pls?
    Thanks,
    Catalina

    Hi Catalina,
    I can't say much without seeing the error. However, you may note down the error number and search the sap notes. If possible, give the error number on this forum also. Thanks,
    Vishal.

  • O4G1 - Unit of measure group does not exist

    Dear all,
    This is error exists in O4H1 : Unit of measure group does not exist.
    I have created the group following by this path: Industry Solution Oil & Gas (Downstream) -> HPM  (Hydrocarbon Product Management) -> Oil- and Gas-Specific Units of Measure and Additional Stockkeeping Units -> Define additional stockkeeping units of measure (Transaction O586).
    But i don't know how to use this UOM group. Pls help!
    Thanks,
    Edited by: Le Vinh Quang on Dec 29, 2010 8:05 AM
    O4H1 --> O4G1

    Hi,
    Maintain in the Material Master data for your material.
    The UoM Group field is on the Oil-specific data tab in MM02.
    BR,
    Barna

  • SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

    Hello,
    I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
    I have followed couple of links as in
    this and
    this links but it did not fix the issue. Can anyone help me on this issue?
    Regards
    Gaurav

    Hi gauravroondhe2306,
    According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
    logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
    To troubleshoot the issue, you could follow the solutions below.
    1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
    it is not recommended to install SQL Server on a domain controller.
    2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
    http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
    Regards,
    Michelle Li

  • An error has occurred: The plugin -65221 does not exist in the CMS

    Hi,
    I already raised this issue before and I thought this is already fixed. Everytime I upload this Crystal Report and try to schedule it using the RESCHEDULE window, I can't change the parameters. Everytime I click on the value of each parameter, the following error displays:
    "An error has occurred: The plugin -65221 does not exist in the CMS"
    What can be the cause of this and how can I resolve this? We are using Business Objects XI R2 with SP2 and Crystal Reports XI.
    Thanks.

    Hello Neozeke,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • An Error has occured:The plugin 65534 does not exist in the CMS (FWM 02017)

    Hi,
    I get the error when I click on Parameter option while rescheduling Crystal Reports from Infoview. I can schedule the reports successfully, the error is only while rescheduling.
    The error is as follows:
    An error has occurred: The plugin -65534 does not exist in the CMS (FWM02017)
    Environment - BOXI 3.1 with Windows AD
    Application server - Tomcat
    Would appreciate any help.
    Regards,
    Anisa

    Hello Anisa,
    Are you able to solve the issue...
    We are also getting same issue. if you are able to resolve the issue. please let us know the setps you followed it will be of great help.
    Thank You,
    Regards,
    Satheesh Reddy. R.

  • ERROR ORA-00942: table or view does not exist

    Hi:
    I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
    declare
    gr sdo_georaster;
    begin
    select image into gr from gis.RasterImages where geoid=1 for update;
    sdo_geor.generatePyramid(gr,'resampling=NN');
    update gis.RasterImages set image=gr where geoid=1;
    commit;
    end;
    I trying to create a pyramid,but the error appeared:
    ERROR at line 1:
    ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
    ORA-06512: &#22312; "MDSYS.SDO_GEOR_INT", line 162
    ORA-06512: &#22312; "MDSYS.SDO_GEOR", line 826
    ORA-06512: &#22312; line 5
    I don't know why?
    Anyone can help me?
    Thanks.

    Hi,
    I think you are executing the select statement for schema X and the table is in the schema srnr.
    And schema X is not having select privilege on the table 'students' present in schema srnr.
    Goto schema srnr.
    Execute the following statement:
    grant select on students to X;
    This will give schema X the privilege to query the table students present in srnr.
    Regards,
    Anupama

  • Error:  The local root folder, ZZZZZZ, does not exist.  Please...

    Dreamweaver newest - Cloud
    Windows 7 Prof 64b SP1
    Everyday now upon firing up Dreamweaver I am getting the same error. As long as I worked on this certain site last the day before, dreamweaver of course tries to load that site upon the next startup.
    The error:  The local root folder, ZZZZZZ, does not exist.  Please choose a new local root folder
    I have typed the path myself and browsed to it many times.  When I go into the Site manager/edit site to correct this, it already has the correct path listed there.  If I just leave what is there and hit save, it doesn't work.  Once re entering is done it allows me to work on the site again. Connecting to remote/upload files and everything works fine.  I can close DW and reopen and all will be fine, for a while.    If I close it and maybe two hours later come back to work on it, DW will report that same error again on startup.
    Other editors of the site with same cloud version of DW and same site settings are not having this error. We've combed for differences.
    I've deleted the site definition altogether and recreated it.  It does not stop the error.
    I found some old references to this issue in the old macromedia forums dealing with Mac and spaces or odd characters being an issue in the local folder path. I'm on windows, but the complaints sounded so similar I decided to try a test suggested there.  Their suggestion was to create a new blank html file, without saving, add some text, select the text, use the link icon in the properties manager to drag a link out to any file in the files panel.  Upon doing so, DW creates a full local path that you can see in your html since you haven't saved the file yet.  The suggestors of this test said you should see if your "mac" and DW was having trouble with spaces or odd characters in the path.   Well the following path shows a PIPE character being created in the path by DW on my test page. 
    file:///W|/private/09 Websites/zzzzzz/index.html
    Could this be showing there is some kind of issue that I need to correct?  Or is this typical?  See the pipe character being listed after the network drive letter of W
    Our local root folder path:
    W:\private\09 Websites\zzzzzz\
    Server Settings:
         Root Directory:
    public_html/zzzzzz.com/
         Web URL:
    HypertextTransferProtocolCOLON//worldwideweb.zzzzzz.commercial/
    Any help or suggestions would be appreciated.

    Sudarshan Thiagarajan wrote:
    remote
    /home/zzzzz/public_html/zzzzz.com
    Is this how your remote setting is defined? If it is, do you have a folder called zzzzz.com on your remote server trailing public_html? Ideally public_html is your website root - index.html resides within that, unless your configuration states otherwise.
    To come to your actual question of the local root folder, yes, your file manager wont show files if the connection fails. However, accessing it depends on the permissions you have on your network drive. Have you checked that?
    I'm not sure why our guy has another folder underneath public_html. My guess is he has some company related hosted test folders for various things under there.  I can see a couple other folders under public_html while checking with filezilla. I suppose he just directed our domain to our web folder under public_html. 
    Again, two others here are using these exact same settings with no root folder errors from DW. We've checked many times and all is the same for them.
      Here are some screen grabs of the settings if this makes it more clear.
    This last one showing the remote connection address under the files/assets panel is the one that looks strange to me.  It shows a home folder / then a folder with our site name / then public_html / then our sitename.com .    Seems convoluted to me.  But it works for everyone else so I'm not sure if this error I'm getting has anything to do with these settings or if there is just some old DW settings file hung up in my system that I need to find and delete or what.
    Thanks for any ideas.

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

Maybe you are looking for

  • Convert SWF to AVI Video

    Hi plz help I have made presentation in flash cs4. I have one main file Index & loading rest all the files through LoadMovie. I want to convert my presentation into AVI for video but when i export it in avi so it converts in AVI but its not taking th

  • Figure out Servers ip's in runtime.

    Can anyone give me some direction on how can I return my client which works           with a cluster using IP Multicast, a list of IP's of all the running servers           in that cluster so he can connect each of them directly.           I need thi

  • Dynamic select too big for varchar2

    Greetings, I'm creating a dynamic sql query that in most cases will be larger than a VARCHAR2's size following the idea in this thread: Manual Tabular Form - APEX_ITEM I haven't found anything on Apex Documentation about using CLOB as return value fo

  • Trouble uploading pictures to website

    I try to upload pictures to my webiste to the server, but the webpage just shows an empty box with no picture when displayed in IE. I tried saving the images for web in Photoshop, but that didn't seem to work. Any ideas?

  • Choppy playback after burning data dvd in toast

    Hi Ive just finished burning a copy of various short clips which I exported as a quicktime files from FCP onto my desktop then saved them as quicktime mov. through QT player which was successful enough.I then burned a copy of this QT movie in toast a