Errors in WSDL when imported into Eclipse or NetBeans IDE

I have tried to import the AXL WSDL into both NetBeans 5.5 and Eclipse 3.2 IDE and got errors. In this forum I found that this problem has been reported to Cisco many times. Do we have a work around? I tried it on CCM 4.0(1). Has it been fixed in later releases on CCM? I wonder if we need to upgrade out CCM just for this?

umm.. am I blind? I thought I had just posted here.
Anyway.. with CCM 5.1.1 you get a WSDL that you can import with AXIS 1.4 and wsdl.exe. With earlier versions, you're off to some manual hacking on your own.
I didn't write the webserver plugin for AXL, but I suspect the reason for this whole mess is the following: instead of using a webservice toolkit, Cisco simply wrote their own (ISAP for CCM 4.x) plugin that goes through requests line by line and analyzes them.. everything done manually. It doesn't even validate XML and in CCM 5.0.4 you can send invalid XML data (including corrupt AXL requests) to the CCM and it will be processed (in many cases you even get information back.. e.g. you can mix getphone and getline and you get a valid getphone response)) and it will get you a valid response (other than "incorrect xml"). This would also explain why the order of the xml elements is crucial.. if they had a regular webservice framework, the order would not matter as elements would be extracted from a request via dom/xquery lookups (that's how my own axl framework does it.. both require xml validation so any invalid xml axl would return would immediately trigger an error.. on the other hand, switched element order doesn't matter to my framework).
With that in mind, it's clear that every WSDL file is hand written and unless they start from scratch with a webservice capable framework (I suspect it's written in C(++) so it's not as simply as copying and pasting code into java files and have the whole thing run as a tomcat app and use JAX to export the WSDL file), AXL will continue to be a mess.

Similar Messages

How do I correct the darkest blacks from becoming bright blue when imported into LR?

When shooting in RAW with a Sony RX100M3 the darkest blacks become bright blue when imported into LR. Any ideas when this happens and how I can fix it?

If this is occurring in the develop module the you have the shadow warning turned on and this shows as blue, just like the highlights show as red. You can turn this off by clicking the triangle in the upper left hand corner of the histogram.

What happens to CC or Watermarks when imported into PrPro

HI all,
my question (s) are about information that is stored in the out of tv safety feilds when imported into Adobe premeir pro. files will be mpeg-2 video files SD and Hd
1) what happens to closed Captioning data (does it get moved or is it stripped)?
2) what happens to Nielsen watermarks on line 22 and 20?
Can anybody give me an understanding of this.
thank you much!!
Jay Agoglia

Nothing happens to the music on your computer. Nothing will "combine" unless this other person actually downloads something to your computer. Simply logging into an iTunes account does not instigate any automatic downloads of anything.

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Imported ID pdfs appearance alters when imported into Quark as picture

Can anyone tell me why Indesign created pdf's change when imported into a quark picture box? I receive ads from various companies for a magazine in hi-rez pdf formats and when imported the appearance changes to include all the components/elements/boxes/etc. of the make-up of the ad....the things that are not supposed to be seen. Please help... advertisers are complaining and i can not stop it, or fix it.

Quark converts PDFs to EPS internally and thus has no support for the
more advanced features of PDFs exported from InDesign.
You should request EPS or PDF X/1-a if you want to continue to use
Quark. That said, this is an InDesign forum so I will heartily recommend
you switch to InDesign.
As you've discovered more and more folks are doing just that and you're
going to be left in the dust and those advertisers are going to be
looking elsewhere to spend their money.
Bob

Help! Photoshop edited jpg color distorts when imported into Muse

Okay, so I am trying to build a photography webpage (among others) and I edit most of my photos in photoshop. All photos that I edit in photoshop and save to jpg, look great when printed, uploaded to facebook, etc. however when I import them into Adobe Muse for and put them on my webpage, the colors of the photos become desaturated and/or slightly distorted (so that they look dull). When I edit images in lightroom and save them as jpg and import them into Muse, they look fine, but colors edited in photoshop seem to mess up my photos when imported into Muse.
What am I doing wrong?!
Susan

You are using some odd color management settings and not converting to sRGB most likely... Check your settings in PS itself and the Save for Web dialog and experiment around.
Mylenium

Swf's/flash,banners When Importing Into Dreamweaver Put Out Slices..

Hi guys/gals
I think im doing it wrong or missing something, even have a funny feeling i might have to use some css? Not really sure.
My problem is after i have saved my move,banner - when imported into dreamweaver it puts all the slices out of whack ?
I cant find anywhere to import it into my photoshop layout, can't "Bring to front" in dream weaver <- ? :/
I have searched everywhere and I can't find with my terms what im looking for..I figure if nothing is coming up then im going about this
the wrong way
Any help would be muchly appreciated.
J

Hi
Slicing images from a photoshop comp and then creating a web page from them is never a good idea, and will present many compatibility problems for you. A better alternative is to use css based layouts, this does not mean that you must forget what you have done in photoshop just that the procedure is probably slightly more complex for someone who has not used css layouts before,
A good place to start would be the css basics tutorial then the, using css starter pages tutorial from the tutorials shown on this page - http://www.adobe.com/devnet/dreamweaver/css.html.
(the 2 tutorials mentioned are - http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html, and http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html.
There is also a number of videos that may interest you at - http://tv.adobe.com/product/dreamweaver/.
PZ

I have an iPod 2nd gen. that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos. The card is fine as I can import into iPhoto so any ideas?

After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing. The card is fine as I can import into iPhoto - any ideas?

It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom.

I am getting an error ORA-39143 when importing a dump file

I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
when importing a dump file created by 9.2 exp into 10.2 database using impdp
I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
thanks

well its on the link i provided
"When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
original import tries to append (insert)
there is no parameter here like table_exists_action=truncate/replace
1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
or
2. truncate all the tables (dynamic sql) + use IGNORE=Y
(or
3. drop the whole schema in target database, recreate it, then do the import)

Sld error in IR when importing SWCV

Hi
I'm unable to import any Software Component Version from the SLD into the Integration Repository. I ran transaction SLDCHECK, and successfully launched the SLD without any errors.
However, when I try to importing any software components from the SLD, the following error message is returned: Unable to read software component versions from System Landscape Directory "host addrres:50000"
in detail button
unable to import any Software Component Version from the SLD "host:50000"(swc_import_process_exception)
like this same 4 msgs comming
under this
unable to open connection to host"
host:500000".
the ip address of host could not be resolved. maybe
the URL is misspelled or the host dies no longer exist.
thess details comming in deatils button
Can anyone help please? it arzzent pls can any one help me
Many thanks in advance.

Hi,
Chek ur role and also check ur id is locked.
to know the authorization role check this link.
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards,
Phani
Reward points if Helpful

Error is STMS when import client from 2 different system

I have two system in same landscape, system 1 is production with system ID : SEP, system 2 is develop with system ID : SED (is Domain Controller),
system 1 & 2 in same domain with Domain Controller : DOMAIN_SED in STMS
And then, I exported client 800 on production system (system 1) with profile SAP_EXPA
and I have 3 request : KO00189.SEP ; KT00189.SEP ; KX00189.SEP (cofiles) and RO00189.SEP ; RT00189.SEP ; RX00189.SEP (data)
I copied 3 request above into system 3 (system 3 is different landscape with 2 system above and i setup system 3 at different location, so called backup system. System 3 is setup with system ID: SED and Domain Controller DOMAIN_SED too)
Then i imported client 800 into system 3
and i have an error in system 3 : System unknown in Transport Management System
Please help me ...
Thanks all

hi Shanker !
after reset user TMSADM -> connection not change -> connection work OK
i tried it but error remaining
Information extra :
system 3 is a physical system with Domain Controller : DOMAIN_SED ****** SID : SED and extra setup a virtual system as SEP on system 3
I configured tranport route from SED to SEP, so error "System unknown in Transport Management System" no longer
but arise new error "Error occurred in SED TMS communication"
Information extra error "Error occurred in SED TMS communication" when import request :
Error occurred in SED TMS communication
Message no. XT149
Diagnosis
An error occurred in the TMS communication layer of the following SAP system:
   System: SED.DOMAIN_SED(000)
   Function: TMS_CC_READ_CCCFLOW_OF_TRKORR
   Error: SERVICE_NOT_AVAILABLE ()
System Response
The function terminates.
Procedure
Check your transport control station configuration with transaction STMS.
thanks all
I hope error to solve soon .....

Captivate 3 is wrong size when importing into Flash CS3

I've tried exporting, publishing etc. and no matter how I
try, when I import into Flash CS3 the size of the Captivate content
(background screens, in particular) are too small. For example, I
captured a 423x424 area for my Captivate project. When I import
into a Flash CS3 project with the same dimensions the Captivate
content (screens) are more like 203x203.5 and the mouse path and
slide context starting positions are upper left corner. I've tried
adjusting some of the importing settings but can't get the screens
the right size unless I resize each one manually - and I have
around 100. Any help greatly appreciated!
-Scott

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

Odd frames added to start of audio export from LPX when imported into FCPX

Running into a weird issue exporting audio out of Logic Pro (10.0.6) for import into FCPX (10.1.1) - Logic is introducing extra frames (varies between 2 to 4 frames) at the front of exported audio, becomes detectable when imported back into FCPX.
I do a lot of work where I sync music performances on camera that are recorded in audio and MIDI, and have to deliver remixed audio with picture AND a .MID file that all sync. Workflow used to be shoot video on a C100 and another DSLR with either an audio feed or live mic patched to the camera, while Logic recorded the MIDI performance and any ambient audio via separate mics and pres. Shoot always had some kind of "slated" start marker on camera, in camera audio, and in Logic. Camera edits were edited in FCPX, exported as a Quicktime with the "slate" for a start marker, then audio and MIDI handled in Logic.
This always used to work thru to last fall, when we took a hiatus.
Upon resuming some final shooting in the last two weeks, our audio edits are always running 2-4 frames behind FCPX. It's a consistent offset for an entire export (so there's no drift, no jitter within the files - but the slate tones might be 2 frames and 17 subframes behind and the whole audio file runs behind.) Another export might be 3 frames 2 subframes behind. Always kind of random in the amount of drift - but never more than 4 frames.
Tried a test where I imported just the camera audio in Logic as an extracted audio track, then exported same audio file back to the Quicktime but left the original audio in the video - Logic's exported audio ran behind sync from the original.
Obviously, I'm paying attention to frame rates, sample rates, etc.
As a test, I exported an XML out of FCPX, imported it into Logic, performed some edits, and used the File>Export>Project to FinalCut Pro XML - so everything matched across the board. Opened the export in FCPX - audio ran behind sync again.
If it was just audio I was concerned about, I'd just line it up in FCPX and call it done - but my exported MIDI file NEEDS to be in sync with the picture AND the audio... and wasting time calculating the Logic offset error is a huge detour from getting this work done quickly.
I thought maybe there could be a plug-in issue, but it happened even in the extracted audio from the Quicktime with no plug-ins in any of the signal chains.
Any ideas?

Well… here's a clunky workaround.
It's either a problem with the exported FCPX-XML or the way Logic Pro X interprets the XML.
The simple test here was to put a clip in the FCPX timeline and export it as an AIFF and then export an XML too.
Import the XML into Logic, then import the AIFF as a new track. By default the Logic project is 120BPM. By analyzing the xml-based track and the aiff track, the xml track has an added 164 ticks to the beginning of the referenced video-audio.
Move the playhead to zero, zoom in to the timeline and drag the tick field to 164 then blade all your tracks, then click/drag the bladed tracks to zero. Voila!
It seems to only affect the first audio file. So for example, when I have 10 video clips in my FCPX timeline, only the first audio clip has the added 164 ticks.
Now on to the next challenge…
It's not enough to just de-compound your clips because L and J cuts get referenced to the VIDEO, not the audio underneath.
So… In FCPX you MUST select each clip and choose Break Apart Clip Items from the Clip Menu. Perhaps this is old news but thought I'd mention it here in case others were having problems.
Let's hope Apple steps up their xml game and realizes that when I choose export XML-Audio from the xml popup menu… I want it to send the duration of the audio, not the duration of the attached video.
Ergh! Well… as my friends say… "We're still in the stone age with all this technology."
Happy editing all!

How can I stop Compulations CDs from being broken up into multiple different Albums when imported into Itunes?

I am currently using Itunes 10.6.1.7. When I attempt to import my CDs, any that are Compulation Cds (with multiple artists), the CDs aren't being imported into the same folder and are broken into multiple listing in my Itunes library.
How can change this so that they are imported only by Album?

I think even using Get Info may not reveal the change, though it is possible the behaviour has altered since I last tested it. Playing or updating the tracks location in a script such as UpdateTagInfo seems to get iTunes to re-evaluate the tag.
Assuming WMP is involved it may be best to make the necessary settings adjustments to prevent further changes, use the script to get all of the background changes exposed within iTunes, then correct as you see fit. Alternatively I do have another script called ExportImport that could be used to back up the current state of your tags (you should temporarily rename the media folder during the export phase), after which you would then run UpdateTagInfo and then use ExplortImport in its import mode to restore the corrupted data.
tt2

Errors in WSDL when imported into Eclipse or NetBeans IDE

Similar Messages

Maybe you are looking for