Errors integrating ABap system in SLD and PI

Dears,
I need informations about how to include an Abap system to the SLD , installaed on a different machine, and to make it available for the communication with a PI system.
It's a silly question but I'm quite confused about the step should be performed. I partially did the integration following the documentaion in my knowledge, but something is missing.....and does not works.
regards

Hi refer these links
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4
regards,
Surya

Similar Messages

  • [SLD] Autoregistration of ABAP System in SLD

    Hi,
    want to registrate an ABAP system in SLD.
    RZ70 create errors, because RFC destination is missing. 
    Trying to create a destination type T to the SLD sytstem. I'm
    using same parameter as define in another system that is
    also connect to SLD, but he doesn't recognize the gateway service.
    Without gateway information he says that the programm is not
    registered yet.
    Where to register the programm? In ABAP system or XI?
    thanks

    Hi,
    you can find the solution here.........
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    Thanks,
    Madhu

  • Pushing data from abap system to SLD

    Hello,
    I am pushing data from my abap system to SLD.
    Job SAP_SLD_DATA_COLLECT is successfully finished but the job SAP_LMDB_LDB_0000000001. is not visible in sm37 in solman.
    Hence technical system is not visible in LMDB.
    Please guide me
    Thanks and Regards,
    Akshay

    HI Akshay
    I hope you had make sure that in SM61 you have assigned batch servers for the jobs.
    Can you try to sync your LMDB with SLD once. There is option in LMDB to sync the data, Just see if you are getting the technical system details.
    Also, please check the rfc destinatoin with ICM port if it is stable.
    RFC LMDB_SyncDest<X> is using ICM Port 80<NR>
    You can proceed as below
    Please De-Activate the Sync Job in Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB.
    Execute transaction 'SM59'.
    Locate the HTTP Destination -> 'LMDB_SyncDest<X>'.
    Switch to Edit mode.
    Change the Service No to 5<XX>00 where XX is the instance number.
    Then makesure the Authorization and Connection test are working.
    Then Re-Activate the synch job, via Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB
    Apart from that, can you check below note if it is applicable for you
    1615263 - LMDB: Incremental Content Sync Job remains "Scheduled"
    Regards
    Rishav

  • Registering ABAP system with SLD Web AS JAVA

    Hello,
    I'm trying to register an ABAP only system with an SLD that resides on a JAVA-only system. When registering the ABAP system in RZ70, I enter the gateway host of the JAVA-only system and the gateway service as "sapgw<instance>". However, when looking at the java-only system, I don't see that the gateway is even running.
    The JAVA only system is running on Windows 2008.
    A couple questions:
    1) Is "sapgw<instance>" the gateway service on a java-only system?
    2) If the gateway is running, does it show in the services or in the SAP MMC?
    3) I've tried starting the gateway manually using "gwrd -force pf=<start profile>" and the dev_rd log says"***LOG S00=> GwInitReader, gateway started ( 2980) [gwxxrd.c     1757]
    ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
                  EIO*: Input/output error OR: Access is denied. [shmnt.c      2174]
    ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      506]
    Is this the right way to start the gateway?
    Any help would be greatly appreciated.
    Thanks,
    Dale Dingmann

    Hi Dale,
    could you please tell us which Release your AS Java is? I have an AS Java 7.01(UsageType EP) on an AIX machine with a local SLD to which an AS ABAP 7.01 should register. I am not sure whether I can use the solution mentioned above or whether I have to install a standalone gateway.
    System Landscape Directory Planning Guide (March 2010, page 43) quotes quite a similar solution but without Information concerning the release. This information also belongs to a standalone SLD. The last three scentences of SAP Note 1057720 quotes that for releases up to and including Release 7.0 one has to install a standalone gateway. In higher releases however "the SCS of the AS Java installs an RFC gateway and configures it as the default in the SLD". Is AS Java 7.01 a higher release than 7.00 and how can I check wheter there is an installed Gateway on SCS instance or not?
    Can someone clarify that point?
    Best Regards

  • Tech System in SLD and RZ70 in 4.6c and 4.7 systems

    Hi,
    We have two legacy systems R3 4.6C and R3 4.7 Systems in our landscape and we are using PI 7.1.
    we are setting up configurations for IDOC communications
    1) between 4.7 and PI
    2) between 4.6C and PI
    for registering 4.7 system in SLD, we used RZ70 transaction in 4.7, and the tech system (of type AS ABAP) got created in SLD, so we could proceed with creation of Business system for one of its abap client.
    but when we tried the same thing in 4.6c system, when we tried executing RZ70 in 4.6C system, it says "Transaction RZ70 does not exist".  Since 4.6C does not support rz70, how can we register the corresponding Tech System in PI SLD.
    Thanks in advance.

    Hi
    The ABAP-based SLD data supplier (transaction RZ70) is available for all SAP systems as of SAP Basis release 4.0B.
    For details see here: http://help.sap.com/saphelp_nwpi71/helpdata/EN/11/0dfe55e0c8fc4e910706a47ca6859b/content.htm
    Are you sure you typed in transaction code correctly?
    If everything does not help open a CSN at SMP and in the meantime - as a workaround - you can maintain the SLD manually for that system.
    Regards,
    Volker

  • Error dbconsole 11g (system event log) , and emca ?

    Hi to all
    i work on database 11g r1 on windows 7 64 bit ultimate , and i am new on dba , when i want to start dbconsole service it appear this error :
    Windows could not start the OracleDBConsoleOracl on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1 . wha is the problem ?
    another question plz
    If I have written this command (emca -config dbcontrol db -repos recreate) .. What exactly will happen? and what is (emca log) ?
    thank you very much

    I am not clear about your 1st question but in last queation you are going to Drops the current Database Control management repository and then recreates a new one.
    http://docs.oracle.com/cd/B28359_01/server.111/b28319/emca.htm

  • Registration of systems in SLD and SMSY (Configuration of Managing System)

    Hi folks,
    I´m following this documentation here "How to Configure Maintenance Optimizer to Use Software Lifecycle Manager to Automatically Download and Deploy Support Packages and SAP Enhancement Packages" and on the pre-requisites are 2 things that i don´t uderstand:
    1. The SLD server is running.
    2. You are logged on to the Visual Administrator of the J2EE Engine as an administrator
    what is it?

    Oi Nelson
    basicamente o documento diz para vc ter seu SLD configurado corretamente (ou seja, com todos dados do seu landscape atualizado - fundamental para gerar o arquivo XML de upgrade/support package stack apropriadamente) e para vc estar logado no Visual Admin com o usuário J2EE Admin :-)
    Pelo tom de sua pergunta, imagino que vc não saiba ao certo o que é e para que serve SLD e Visual Admin. Aqui vão alguns links bem úteis:
    http://scn.sap.com/docs/DOC-8042
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1870c690-0201-0010-fca0-b66794ea3ea3
    http://help.sap.com/saphelp_nw70/helpdata/en/ee/74b3407e73c57fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c46577095735b6e10000000a42189d/content.htm
    e
    http://help.sap.com/saphelp_nw70/helpdata/en/39/83682615cd4f8197d0612529f2165f/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
    http://scn.sap.com/people/heidrun.reichart/blog/2006/11/24/how-to-use-sap-netweaver-administrator-with-sap-s-java-platform-enterprise-edition-5
    Espero que isso ajude :-)
    Abraços,
    Tomas Black

  • SXI_CACHE error "ABAP business system = 7.10 and therefore has no cache"

    Hello Community,
    I'm running an ERP System with Basis 7.40 SP5 and a PI 7.4 SP6
    When I try to make a Cache synchronization is transaction SXI_CACHE, I get the following error:
    Thrown:
    com.sap.aii.ib.core.abapcache.CacheRefreshException: Receiver <SID>_200_ERP is not an ABAP business system >= 7.10 and therefore has no cache
    at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:115)
    at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:106)
    at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:637)
    at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:280)
    at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:161)
    at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:172)
    But the System is in the SLD in Version 7.40 and the Bussines System is assigned correctly.
    It's seems to be a bug in the validation.
    Does anyone knows a workaround for this situation?
    Best regards
    Bastian Gschrey

    Hi Tomasz,
    I solved the Problem by cleaning the SLD Cache in the Integration Builder.
    This worked for me for 2 Systems.
    For the third system, that had the problem, the solution was to delete it from SLD, cleaning SLD Cache in Integration Builder, re-register(rz70) the system in SLD and assign the Business System. After that the problem was solved in all systems.
    Best regards
    Bastian

  • Error while deleting the business system in SLD

    HI
    I am trying to delete the business system in SLD and encountering the following error .
    if some one has any idea as to why is this error occuring
    java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Thanks
    Nikhil

    hi Nikhil,
    Null pointer errors are difficult to correct as is
    If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
    sachin.

  • Problems in SLD and Cache refresh (SXI_CACHE).

    Dear Experts,
    I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
    1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
    2) SLDCHECK : Log says No Business System for ABC Client 100 ".
    where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
    My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
    SLDCHECK Log Snippet:
    SLD server access settings:
    host name: ABCXIDEV
    port number: 50000
    user : PIAPPLUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    List of business systems maintained in the SLD:
    INTEGRATION_SERVER_ABC
    ERP_DEV_100
    Calling function LCR_GET_OWN_BUSINESS_SYSTEM
    Retrieving data from the SLD server...
    No corresponding business system found for system ABC client 100
    => Check and maintain the SLD content for the current client

    Hello,
    Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
    You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
    From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
    Hope this helps you..
    Regards,
    Jazz

  • Abap user for SLD Destination

    Hello!
    I have small question.
    I'm adding system to SLD and on the system where SLD is located i have to create Destination (for RFC in abab system). In this Destination i need to set user from abap system.
    But which roles this user should have?
    I used my (sap all priveleges) account for testing and it works fine, but i whant to create service user for this porpose and need to to know roles for this user.
    Thank you in advance.

    check
    https://help.sap.com/saphelp_nw70ehp2/helpdata/en/48/b7b38fecf26745e10000000a421937/content.htm

  • How to get DEV Integration Server into Prod SLD?

    Hello,
    in a two-tier landscape I need to define transport targets in SLD. Both PI syetems have their own SLD. In each SLD there is just the Integration server of the corresponding PI system. How to get the DEV Integration Server into PROD sld? Manually?
    Thanks,
    CHRISTOPH

    Hello Seshagiri,
    that is what I wanted to know. So there seem to be two possibilities:
    - Creating the DEV Integration Server in productive SLD manually
    - Exporting the DEV Integration Server from DEV SLD and import it into productive SLD.
    I tried importing / exporting SLD content some time ago. AFAIK there is no exporting single technical / business systems, you can just export all the content together from a SLD?
    Thanks,
    Christoph

  • R710 error while booting - pcie training error: integrated raid

    http://www.ebay.com/itm/Dell-K869T-DW592-PowerEdge-R610-R710-iDRAC6-Enterprise-Express-Remote-Access...
    Throw one of those in there.  If you need it 1 time, it paid for itself.

    I have an r710 and just now booted it for the first time.
    First thing it does is check the ram then it looks for the iDRAC card (which I don't have) and then after that is when it displays the error:
    pcie training error integrated raid
    System halted.
    The pcie card I have in the raid slot is the PERC H710 raid card.
    The green LED on the card blinks/flickers so I am hoping that's normal for it to do that.
    The BIOS version on the R710 is 6.0.7.
    This topic first appeared in the Spiceworks Community

  • User mapping certificate in UME (J2EE) with ABAP system as Backend (SNC)

    I hope someone can help me with the user mapping concept (X.509 V3 certificates) for both "worlds" (ABAP and JAVA Stack).
    I know how to install and configure certificate based (X.509) login to SAP ABAP and SAP JAVA (J2EE) Stack (--> enable encryption for communication and Single Sign On).
    Situation:
    We have a ready installed and configured X.509 certificate authentication environment for the ABAP world (between SAP GUI and SAP Server System)
    and the user mapping was configured in the ABAP System (SU01). As the users are using certificates, the passwords are deactivated on the ABAP System.
    Now if you want to integrate a JAVA (J2EE) Sytem and you want to configure the UME to the ABAP System (as Backend), you have an administrative effort problem with the user mapping (X.509) in the UME configuration.
    1.) It is possible to assign manually the user public key to every user --> But to much effort
    2.) As the user does not have a password (deactivated in the ABAP system), the way to combine the automatic mapping with a user login does not work.
    3.) In the distinguished name of the user certificate there is no information about the SAP username itself
        --> you are not able to use any information of the DN to bind a user in the Login Module configuration.
    Now my question:
    Is it possible to use the sncname information from the ABAP System (still configured and available) for the UME configuration?
    As i know, it is possible to write an own Login Module. Does anybody has a customized Login module for this issue?
    At the end the best solution would be to enable the same user mapping mechanism on the JAVA world as on the ABAP world. --> Mapping the Distinguished Name to the SAP User

    We have developed a login module which is working with Kerberos auth, not x.509 auth, but still solves a very similar problem to the problem you are describing. As you know, when SNC is used to logon to ABAP stack, the SNC name of the user is mapped onto a SAP user via entries in the USRACL table. Our mapping login module takes the authenticated user principal name from the shared state and uses this to lookup the entry in USRACL table on ABAP stack, and from this it will know which SAP user  to use, and can update shared state with this info so that CreateTicketLoginModule will created an SSO2 ticekt for the mapped SAP user id.
    This means that mapping of users externally authetnicated identity onto SAP user/client can be managed in one place, e.g in ABAP stack using USRACL table entires and su01 t-code etc.
    I know it is not exactly what you wanted, since you are looking to use x.509 certifiates instead of Kerberos authentication, but I thought it was worth sharing so that you know the concept has already been implemeneted many times. Many of our customers use this login module when they have our product, for the same reasons that you have stated.
    Thanks,
    Tim

  • Related Integration server for Business System  in SLD

    HI All,
    IN SLD we have one Technical System for PI and one TS for R/3 System.
    When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
    It is having None and Business System of PI TS System.
    Please help me in this.
    Regards,
    Sree

    Hey
    Looks like you are defining this Business system as a Integration server.
    See here is what you need to do.
    Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
    Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
    As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
    If yes,then simply select that
    Thanx
    Aamir

Maybe you are looking for