Errors loading into 0bbp_ds1 from 0bbp_po

When trying to load data from 0bbp_po to 0bbp_ds1 i am getting the following error message 'For Purchase Order 4100034607 backend source system empty even with extd scenario'
Has anyone encountered this?
If yes, how did you resolve it?

Hi,
There might be a chance that this particular PO Number has been deleted in the SRM system recently.Check whether this PO Number exists in 0BBP_CON or 0BBP_INV as the data comes into 0BBP_PO from these ODS's only.
Thanks,
SKat

Similar Messages

Creating new analysis gives "Error loading XML Document from ..."

Trying to create analysis and getting "Error loading XML Document from saw.dll/answers/answersproperties.xml?fmapId=S1clug.
The response given was:" after choosing subject area. Analysis editor is opened but Subject Areas is empty and can't do anything.
The problem is on Mozilla 12 (16.0.2, 17.0.1) and IE 8. Chrome works fine.
My system is Win 7, BI 11.1.1.6.0 is on Oracle Linux (and by the way Mozilla from Linux system works fine)
What could be the reason of this?
Edited by: 898973 on 4/12/2012 15:11

Reinstalling Mozilla with "Remove personal data" option checked resolved the problem.

Error loading XML Document from /analytics/saw.dll/common/privileges.xml

I tested my procedure for upgrading from OBI 11.1.1.5 to 11.1.1.6 which was successful. I had to rollback to OBI 11.1.1.5 using my database backup and VM snapshot due to project requirements.
The OBI application successfully comes up but users who login just get "Error loading XML Document from /analytics/saw.dll/common/privileges.xml?fmapID=KqIJCw. The response given was: ". They can't close this message box so are unable to do anything.
How can I fix this?

Hi All,
You can face this issue with other versions of OBIEE 11.*
Problem cab be solved as follows:
Go to http://localhost:7001/em > coreapplication > Capacity Management > Scalibility >
1. Lock and edit
2 .increase number of presentation services to 2
3. restart opmn component.
Go to coreapplication > Availibility > processes
1 .please note that in deployment > catalog > change path of catalog field from $coreapplication to path where your catalog resides.
2. Take down your primary instance.
3. As your secondary is up, it will grant you to browse you through catalog and dashboards.
If you want to run primary instance of presentation services
Go to path \Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips2
except catalog and catalog manager > Copy all other files to coreapplication_obips1
restart opmn component > problem solved.!!!
Regards,
Akshay S.
please like if you find it helpful

Error loading key aliases from keystore

I have attached "oracle/wss10_username_token_with_message_protection_service_policy" policy to a BPEL service and also created server.jks & client.jks and configured Keystore in weblogic but when I try to test same from em by selecting *"OWSM Security Policies"* ubder security tab it asks for *"* JKS Keystore Location"* when I click "*Load Keys*" button in order to locate my Client.jks than it pop up following error message as *"Error loading key aliases from keystore"*.
Mine EM version is 11.1.1.7.0.
Thanks in advance.

Hey,
Can you specify how you generated the jks files. I think you have missed something.

Data Loading into Infocube from ECC.

Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!

The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information.

Load into database from a file

hi,
i need to know is there any other means other than sql loader ,i import data into the oracle8i database from a file i.e)if i need to load into a server from a client machine
which does not have oracle 8i client version how could i
do it.kindly help out. thanks in advance.

UTL_FILE
With the UTL_FILE package, your PL/SQL programs can read and write operating system text files. UTL_FILE provides a restricted version of operating system stream file I/O.
UTL_FILE I/O capabilities are similar to standard operating system stream file I/O (OPEN, GET, PUT, CLOSE) capabilities, but with some limitations. For example, you call the FOPEN function to return a file handle, which you use in subsequent calls to GET_LINE or PUT to perform stream I/O to a file. When file I/O is done, you call FCLOSE to complete any output and free resources associated with the file.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_file.htm#ARPLS069
Joel P�rez

Error loading csv file from application server

Hi all,
While uploading a csv file from the application server to psa we are getting the following error,
Error 2 while splitting CSV data record
Message no. RSDS_ACCESS011
Diagnosis
Error 2 occurred while splitting the CSV data record 1
1 = Could not find a closing escape character
2 = Invalid escape character
3 = Conversion error
4 = Other error
System Response
The function was terminated.
Procedure
Check the values of the data separator and escape sign, and try again.
But i've checked the file and the escape sign, data seperator in it also. Everything is fine. The same file we are able to load successfully in quality system.
How to solve this error??
Thanks in advance.

Hi BI consultant:
   Could you please provide more details?
For example:
1.Is your P application server a UNIX flavor? (Solaris, AIX, UX, Linux)
   If yes..
         2. Are you able to see the contents of the file correctly with a "cat" or "vi" command? (at operating system level).
               If no...
                     3. Did you upload the csv flat file to the server via FTP?
                            If yes...
                                 4. Did you use the "binary" or the "ascii" parameter on the FTP command used to upload the file?
Probably you need to upload the CSV file again to your application server and make sure you can se the file contents ("cat" or "vi" command) before trying to execute the InfoPackage.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 3, 2010 11:13 AM

Error Loading the file from application server

Hi Team,
I'm trying to load the .CSV file from application server and I'm getting the error message.
In the data package
Update to PSA --Green
Transfer Rule -- Green
Update Rule - error ABORT was set in the customer routine 9998
Error 1 in the update
Please help me to provide the solution.
But when I try to load the other files there are no issues. thanks.
Regards,
Senthil

Raj
check the below links, which can helps to solve your issues
Flat file data load
flat file Data loading issue
Mahesh

Error loading transaction data from csv file

Hello all
I am getting the following error when loading from a .csv file:
Error 'The argument '-65.025,60' cannot be interpreted as a number' on assignment field BALANCE record 1 value -65.025,60
The BALANCE field is defined as : 0D_BALANCE (from the SAP Demo Cubes).
Any help on this is appreciated.
TIA

Thank you all for your help
I made the changes. I was still getting the error until I had changed one item.
Under the FIELDS tab, I set the "FORMAT" to "External".
After doing this, all worked well.
Thanks again!

Photo loaded into CS4 from Aperture question

In Aperture I wantt to take an NEF into CS4. So I choose Edit - open in CS4. Aperture makes a PSD file and opens CS4. All well and good.
I thought now once in CS4 if I selected Convert To Smart Object I could then click the little icon created what is now Layer 0 and Camera Raw would open and I could edit in Camera Raw? Is this not the case?
If I drag an NEF file onto the CS4 icon in my Dock, CS4 opens and I'm in Camera Raw first. I was hoping to access Camera Raw at times as above though.
I hope this is clear?
Thanks all.

If you really only want to import only one image from iPhoto to Aperture, and if you have Aperture 3.3 and iPhoto 9.3 then you can open Aperture and iPhoto at the same time on their respective libraries and simply drag the image in question from the iPhoto Library to the project in Aperture.
However, this will not import the full resolution raw originals but full resolution high quality jpeg previews; if jpeg suffices, you can do this, if you temporarily need a single image only. Also, your captions and keywords will not be imported. Usually you will want to import the original with all your edits and tags, then it would be best to merge the libraries as TD explained.
For one image to import from iPhoto, you could use the command "File > Reveal in Finder > Original" in iPhoto to show the original master file in the Fider window. Then drag this File into the Aperture window. This way you will be importing the master.
Regards
Leónie
Message was edited by: leonieDF added reveal original file

Data Loading into BW ( from excel to database table)

Hi Guys
I have an excel sheet which has the fields:
--> Soldto(3.1), Soldto(4.6), Shipto, Billto, Payer, SalesOrg, AAG.
I also have a database table /BIC/AZSTXREF00 in BW QA (SE16), which has fields:
--> /BIC/ZSOLD_TO(3.1), /BIC/ZBTOPRTY, PAYER, SHIP_TO, SOLD_TO(4.6), BILLTOPRTY, ACCNT_ASG, RECORDMODE.
The fields are in this order in the respective places.
Please note that the fields are not in the same order in the two places. But they are equal in number.
How can I delete the previous data in the database table in BW, and then load the fresh data from my excel sheet.
Thanks.

Hi Chintai,
/BIC/AZSTXREF00 seems to be the Active Table of ZSTXREF ODS. If this is the situation you can delete all ODS content from RSA1 --> right mouse click on ODS --> Delete Data.
For the upload: right mouse click on ODS --> Show Data Flow --> Take the name of the InfoSource for this ODS --> go in InfoSources tree --> enter in Transfer Roules --> Modify mapping beetween fields of MS-Excel file and you Transfer Structure --> Activate --> Upload.
Ciao.
Riccardo.

Master Data & Hierarchy loading into BPC from BW

HI all,
When i am getting master data and hierarchy from BW i need to replace a "-" to an "_".
These members are parents in BW.
I was able to do that using a conversion file for the master data. But when i run the hierarchy package it says parents dont exist because the nodes that were pulled before are not with a underscore and not a dash.
Ex: XXXX-XX needs to be replaced as XXXX_XX.
This member is a parent aswell. So i need to add conversion in the hierarchy load. I did that but its not taking it.
Conversion file for hierarchy load looks like this:
External Internal
XXXX-XX XXXX_XX
I am on BPC NW7.5 SP6.
Thank You all.

I think conversion file string manipulation for BW infoobject hierarchy imports has some issues. I suggest reporting the problem to SAP support by creating a message on the Service Marketplace. Please be very clear in the message about your setup and how to recreate the problem and why you think it is a bug so that you don't receive back a reply about it being a consulting issue. Expect some time to work through this with support and eventually development, with the goal of getting a correction note released to fix the issue.
In the meantime, you might try to do the string manipulation in the transformation file *MAPPING section instead of the conversion file.
NODENAME=NODENAME(1:4)*STR(-)NODENAME(5:6)
or substitute NODENAME above for PARENT if that is appropriate level with the issue.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group. I have to stop working and come b

After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced. The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one. I can only work on a few at a time and then i have to go away and come back another day. 4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos. It's taking me days and weeks to process a couple of hundred photos.

The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
HTH
-Allen

Adding leading zeros before data loaded into DSO

Hi
In below PROD_ID... In some ID leading zeros are missing before data loaded into BI from SRM into PROD_ID. Data type is character. If leading zeros are missing then data activation of DSO is failed due to missing zeros and have to manually add them in PSA table. I want to add leading zeros if they're missing before data loaded into DSO.... total character length is 40.. so e.g. if character is 1502 then there should be 36 zeros before it and if character is 265721 then there should be 34 zeros. Only two type of character is coming either length is 4 or 6 so there will be always need to 34 or 36 zeros in front of them if zeros are missing.
Can we use CONVERSION_EXIT_ALPHPA_INPUT functional module ? As this is char so I'm not sure how to use in that case.. Do need to convert it first integer?
Can someone please give me sample code? We're using BW 3.5 data flow to load data into DSO.... please give sample code and where need to write code either in rule type or in start routine...

Hi,
Can you check at info object level, what kind of conversion routine it used by.
Use T code - RSD1, enter your info object and display it.
Even at data source level also you can see external/internal format what it maintained.
if your info object was using ALPHA conversion then it will have leading 0s automatically.
Can you check from source how its coming, check at RSA3.
if your receiving this issue for records only then you need to check those records.
Thanks

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

Errors loading into 0bbp_ds1 from 0bbp_po

Similar Messages

Maybe you are looking for