Errors.log took over /var partition estate

I have 2GB /var partition with reiserfs filesystem, but it get full after 24 hours and the culprit is errors.log
errors.log
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
May 25 08:32:39 Kandalf-ArchLinux NOHZ: local_softirq_pending 08
so on and on... I had to dump this log every now and then to be able to boot into desktop enviroment.
and another issues i have, my processor is running at wrong cpu freq.
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 900.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4900.57
clflush size : 64
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 900.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4897.20
clflush size : 64
How do i set it at max 2.4Ghz?
Last edited by firestrife (2007-05-25 16:06:06)

I had the same thing going on (full /var after a day).
Google told me to append nohz=off to my kernel line in /boot/grub/menu.lst
Since then there are no more errors in the log-files. Could be a bug in the kernel and/or ndiswrapper (or somehow related)
Last edited by n8schicht (2007-06-07 10:26:22)

Similar Messages

Systemd error when using separate /var partition

I recently moved /var to a new partition and have noticed this error in journalctl log
Dec 05 07:48:00 archlinux systemd[1]: Started Console System Shutdown Logging.
Dec 05 07:48:00 archlinux systemd[1]: var.mount mount process exited, code=exited status=32
Dec 05 07:48:00 archlinux systemd[1]: Failed unmounting /var.
I added an entry in fstab for /var
/dev/sda4 /var ext4 defaults,noatime,discard 0 1
Drive is ssd and I simply added the options I have for / is this correct?

HungGarTiger wrote:The error message is actually showing a successful unmount by journald not being able to write to the log file....
What? I don't understand.
The log says "umounting /var" then "Failed to umount /var"
What I think falconindy is saying is that, yes systemd will still try and fail to umount /var. However, if you add "shutdown" to the end of your HOOKS="" array in /etc/minitcpio.conf and rebuild the initramfs. That shutdown hook will umount /var after all the systemd and journald stuff is no longer running.
Personaly, I'm just going have journald write the journal to /run/log/journal. I run AIDE before and after every upgrade, so I will know if anything funky happens to my system. A log would be usefull, but as long as I know what files have been changed I can recover them from my backups.
Last edited by hunterthomson (2012-12-11 06:22:36)

Httpd error log file appears to be missing

I'm having a somewhat frustrating and seemingly elementary problem with the Server, as freshly installed. I did drag a Web Config.plist to restore the web settings from another server, and I have a feeling that this action might have caused a hiccup where the web server won't start. My symptoms are as follows:
with no sites in the Sites list, when I click Start Service for Web Service, I get a dialog:
A service has encourntered an error. / Try to refresh the view (server.address.here/Web). Report the problem to the administrator if it persists. (could not start web service - details in error log).
Now here's what's frustrating... I can't find an httpd error log. the folder /var/log/httpd/ is where I would expect this log to be, but this folder is empty. There's an Apple KB article that says the httpd error log file should be at /var/log/httpd/ ( you can check it out at http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c5ws4.html ), but no such log file exists. (I verified with terminal and also looked with Console: saw no log entries under the httpd line [there is a disclose triangle that discloses no lines] )
On a whim, I thought maybe the /var/log/httpd folder didn't have the right permissions, so I increased my permissions on this older form 0755 to 0757, so that it now reads:
drwxr-xrwx 2 root wheel 68 Mar 27 2005 httpdd
... but upon retesting the Start Service button under Web service, I get the same error and can find no log file.
Like I said, this is a freshly installed copy of OS X 10.4 Server (I have not even upgraded to Server 10.4.10, should I ?) and all I did was an Open Directory configuration (which works), and then dragged a Web Config.plist onto Server Admin to restore saved settings from another machine...
any thoughts on what I should try next?
Thanks, any advice is appreciated.

Recently updated Developer preview and WebObjects. After trying
sudo apachectl configtest
this checks apache configuration sintax.
If nothing fails try to start apache (sudo apachectl graceful)
and take a look at system.log.
discovered that /System/Library/WebObjects/Adaptors/Apache/apache.conf no longer existed.
As root renamed apache.conf.old as apache.conf and restarted. Life is good again.
Your mileage may vary.

Apache error log shows localhost requests going to /var/empty

( 1 )'/etc/apache2/httpd.conf' shows the DocumenRoot as '/Library/WebServer/Documents', as has been standard for previous OSX versions.
( 2 ) Create a simple php file 'local_info.php' and drop it into the DocumenRoot.
( 3 ) try to access : https://localhost/local_info.php
( 4 ) the page is not served, and I get a 'Not Found' error.
( 5 ) Go to '/var/log/apache2/error_log'
[Sat Feb 04 15:21:48 2012] [error] [client ::1]
    script '/var/empty/local_info.php' not found or unable to stat
( 6 ) If I go to 'System Preferences -> Sharing -> Web Sharing' and restart Apache, then try to access the page nothing changes, the 'Not Found' error persists.
( 7 ) If I copy 'local_info.php' from '/Library/WebServer/Documents/local_info.php' to '/var/empty/local_info.php' and then point the browser to
( 8 ) try to access : https://localhost/local_info.php
      the page is displayed correctly.
This is basically pretty much pristine copy of 'OS X Lion -> OS X Lion Server' with 'Server.app -> Services -> Web' turned off for the moment. During this testing phase I am only trying '/Library/WebServer/Documents', and not the virtual hosts.
I have the virtual hosts working very well through 'Server.app -> Services -> Web' which like I said above is turned off for the moment. The only problem I ran into there was that '/etc/hosts' was not being modified when a new virtual host was added via 'Server.app -> Services -> Web', but that was under OS X Server Lion 10.7.2, since I created the virtual hosts, I installed the Combo Updater for Lion Server 10.7.3, and I have not tried to create any new virtual hosts since then.
It is interesting that towards the bottom of httpd.conf there are some flags that load different pieces of code depending upon what flags are set. What is even more interesting is that both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' use one common '/etc/apache2/httpd.conf' file, which depending upon which flags are set during Apache startup load different config code. At least I think it is interesting...
These are the flags I noticed in /etc/apache2/httpd.conf
<IfDefine !MACOSXSERVER>
<IfDefine MACOSXSERVER>
<IfDefine WEBSERVICE_ON>
<IfDefine !WEBSERVICE_ON>
<IfDefine WEBSHARING_ON>
# Here only 'System Preferences -> Sharing -> Web Sharing' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
# Here only 'Server.app -> Services -> Web' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
$
# Here both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' are running
$ ps aux | grep httpd
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
$
Here's some handy stuff that is echoed to my terminal for easy access
# Some handy commands to access the files I use regularly...
sudo open -a /Applications/BBEdit.app /etc/hosts
sudo open -a /Applications/BBEdit.app /etc/php.ini
sudo open -a /Applications/BBEdit.app /etc/bashrc
open -a /Applications/BBEdit.app ~/.bash_profile
open -a /Applications/BBEdit.app ~/.bashrc
open -a /Applications/BBEdit.app ~/.bash_history
# Or I can open all three at the same time
open -a /Applications/BBEdit.app /etc/bashrc ~/.bash_profile ~/.bashrc
To (show|hide) files set AppleShowAllFiles (true|false) and kill the finder
defaults write com.apple.Finder AppleShowAllFiles true
KillAll Finder
Hopefully Apple will get this problem fixed quickly so that 'System Preferences -> Sharing -> Web Sharing' works correctly...
Bill Hernandez
Plano, Texas

I've learned some interesting things since I posted the original message on this thread a couple of days ago.
I had looked at the 'Include directives towards the bottom of httpd.conf, and I did a quick search on 'DocumentRoot' and hit the 'previous' button in BBEdit's find dialog. Sure enough it came up with:
DocumentRoot "/Library/WebServer/Documents"
However if I would have started the search from the top of the document I would have noticed that '/var/empty' that I found in the logs was not a bug, not an error, but by design.
If I would have gone a few lines further up I would have seen :
<IfDefine MACOSXSERVER>
DocumentRoot /var/empty
which explains it all. How incredibly cool, this is really clever!
This morning I went back to httpd.conf
sudo open -a /Applications/BBEdit.app /etc/apache2/httpd.conf
and right at the top of the document staring me right in the face was:
# Mac OS X / Mac OS X Server
# The <IfDefine> blocks segregate server-specific directives
# and also directives that only apply when Web Sharing or
# server Web Service (as opposed to other services that need Apache) is on.
# The launchd plist sets appropriate Define parameters.
# Generally, desktop has no vhosts and server does; server has added modules,
# custom virtual hosts are only activated when Web Service is on, and
# default document root and personal web sites at ~username are only
# activated when Web Sharing is on.
Basically on the Lion Server you are not relying on DocumentRoot, everything is done via the VIrtual Hosts in 'Server.app -> Services -> Web'.
The default Virtual Host when you first launch 'Server.app -> Services -> Web' is <whatever_hostname_you_gave_your_computer>.local, and it points to /Library/Server/Web/Data/Sites/Default, at this point there is no localhost defined as you are used to seeing, there is only /var/empty.
As soon as you create a localhost Virtual host in 'Server.app -> Services -> Web', and the instance of Apache stops and restarts everything works as expected, http://localhost shows a webpage with 'It works!'.
The moral to this whole story is that after having read/modified countless httpd.conf documents, and manually creating the Virtual Hosts, and Includes, and not bothering to read '/etc/apache2/httpd.conf' for Lion Server, it is currently printing and I have my yellow highlighter ready so I can go through it and expand the wisdom level from none to minimal...
I am off to read !
Oh, one thing I did do is drop a copy of a 'local_info.php' that I created that provides some info during testing while I am figuring all this out, but basically the gist is that I put this : <?php echo(__FILE__); ?> along with some other little bits of info anytime the page was hit. I dropped it into several of the virtual hosts I created to make sure I understand how this is all working.

Entries in /var/log/errors.log once per second - how to troubleshoot

This happens once per sec
tail -f errors.log
Nov 12 14:08:38 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:39 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:40 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:41 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:42 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:43 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:44 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:45 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:46 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:47 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:48 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Nov 12 14:08:49 localhost udevd[266]: timeout: killing '/sbin/modprobe -bv pci:v00008086d00002E22sv00001458sd0000D000bc03sc00i00' [296]
Output of dmesg contains several of these:
[ 1320.309919] INFO: task modprobe:296 blocked for more than 120 seconds.
[ 1320.309924] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1320.309927] modprobe D 00000000fffea784 0 296 266 0x00000004
[ 1320.309933] ffff880147549aa8 0000000000000082 ffff880100000000 ffffffff81147e7d
[ 1320.309939] ffff88014772d640 ffff880147549fd8 ffff880147549fd8 ffff880147549fd8
[ 1320.309945] ffffffff8189d020 ffff88014772d640 ffff880147549ab8 0000000000000296
[ 1320.309950] Call Trace:
[ 1320.309960] [<ffffffff81147e7d>] ? new_slab+0x1fd/0x2d0
[ 1320.309967] [<ffffffff81225c17>] ? idr_get_empty_slot+0x117/0x300
[ 1320.309988] [<ffffffffa02bc58b>] ? drm_mode_crtc_set_gamma_size+0x2b/0x70 [drm]
[ 1320.309995] [<ffffffff81226127>] ? idr_get_new_above_int+0x17/0x80
[ 1320.310001] [<ffffffff81406d1f>] schedule+0x3f/0x60
[ 1320.310007] [<ffffffff812eb939>] vga_get+0x119/0x1b0
[ 1320.310013] [<ffffffff8105adf0>] ? try_to_wake_up+0x290/0x290
[ 1320.310040] [<ffffffffa0fdf0cf>] intel_modeset_init+0x66f/0x1c30 [i915]
[ 1320.310059] [<ffffffffa0f81200>] ? i915_stolen_to_phys+0x90/0x90 [i915]
[ 1320.310078] [<ffffffffa0f81260>] ? i915_switcheroo_can_switch+0x60/0x60 [i915]
[ 1320.310098] [<ffffffffa0f84068>] i915_driver_load+0xf38/0x17a0 [i915]
[ 1320.310104] [<ffffffff812eedee>] ? device_register+0x1e/0x30
[ 1320.310116] [<ffffffffa02ba626>] ? drm_sysfs_device_add+0x86/0xb0 [drm]
[ 1320.310127] [<ffffffffa02b68df>] ? drm_get_minor+0x21f/0x2f0 [drm]
[ 1320.310139] [<ffffffffa02b8da9>] drm_get_pci_dev+0x199/0x2c0 [drm]
[ 1320.310162] [<ffffffffa10073f7>] i915_pci_probe+0x1b/0x1d [i915]
[ 1320.310168] [<ffffffff8124c76c>] local_pci_probe+0x5c/0xd0
[ 1320.310175] [<ffffffff8124cfb1>] pci_device_probe+0x101/0x120
[ 1320.310182] [<ffffffff812f156e>] driver_probe_device+0x7e/0x1b0
[ 1320.310187] [<ffffffff812f174b>] __driver_attach+0xab/0xb0
[ 1320.310192] [<ffffffff812f16a0>] ? driver_probe_device+0x1b0/0x1b0
[ 1320.310198] [<ffffffff812f16a0>] ? driver_probe_device+0x1b0/0x1b0
[ 1320.310204] [<ffffffff812f052c>] bus_for_each_dev+0x5c/0x90
[ 1320.310210] [<ffffffff812f11fe>] driver_attach+0x1e/0x20
[ 1320.310215] [<ffffffff812f0e50>] bus_add_driver+0x1a0/0x270
[ 1320.310222] [<ffffffff812f1cb6>] driver_register+0x76/0x140
[ 1320.310229] [<ffffffff8124df16>] __pci_register_driver+0x56/0xd0
[ 1320.310235] [<ffffffff8108a71d>] ? notifier_call_chain+0x4d/0x70
[ 1320.310246] [<ffffffffa02b8fea>] drm_pci_init+0x11a/0x130 [drm]
[ 1320.310262] [<ffffffffa1031000>] ? 0xffffffffa1030fff
[ 1320.310279] [<ffffffffa103108b>] i915_init+0x8b/0x8d [i915]
[ 1320.310285] [<ffffffff81002040>] do_one_initcall+0x40/0x180
[ 1320.310291] [<ffffffff810a2be1>] sys_init_module+0x91/0x200
[ 1320.310297] [<ffffffff8140a442>] system_call_fastpath+0x16/0x1b
Last edited by graysky (2011-11-12 19:09:56)

It looks like your video card, or lack of a module installed for it, is causing the panics.
My suggestions:
Please post a video card manufacturer, and model...of your video card, and some system details, and more information.
Please paste any files or code, etc, by forum pasting guidelines please.
First, I would like to see a list of all modules you are blacklisting (in /etc/modprobe.d/) and if any are in /etc/rc.conf
Secondly, have you done a 'pacman -Syyu' in console to update your system?
Thirdly, can you paste to us, (and using forum pasting guidelines) the output of 'lspci -v'
Also, are you using 32-bit or 64-bit kernel? (uname -m) and your Arch install version is? (uname -r)
Also, please elaborate more on your Arch Install.
a) Gnome, KDE, etc ?
b) X11 ?
c) and have you installed "xf86-video-intel"
---end
*** all the below are not fully necessary, unless you believe a card or plug is badly seated/inserted ****
a) shutdown and turn off power to computer, and then unplug it,
b) then open your case,
c) THIS STEP IS IMPORTANT: make sure you are not making static like rubbing on a carpet.
d) touch the metal case inside the computer with both hands for a few secs (clears a static charge)
before you touch anything else inside your computer.
e) and find your video card, make sure it is seated and inserted fully.
f) sometimes you have to remove the card, and put it back in.
g) Close the computer case, and make sure all connections are secure and tight.
Last edited by Kilzool (2011-12-02 23:34:46)

[solved] cannot update because of full /var partition

hello,
i have problems updating my packages, because my /var partition is full.
Total Download Size: 253.57 MiB
Total Installed Size: 1009.80 MiB
Net Upgrade Size: -1949.50 MiB
:: Proceed with installation? [Y/n] y
error: Partition /var too full: 70069 blocks needed, 52290 blocks free
error: failed to commit transaction (not enough free disk space)
Errors occurred, no packages were upgraded.
to solve this i tried to delete some *.tar.xz files in /var/cache/pacman/pkg, thinking they wouldnt be needed anymore as they are installed already. i could update then, but after a reboot, i had to fix it with
pacman-db-upgrade
. should i try to resize my partitions, or is there any easy solution?
thanks lizzy
Last edited by caravanlizzy (2015-01-07 00:08:24)

What the heck were you doing in that pacman transation? 1 GB was added, and nearly 2 GB removed?
I can't help but suspect that was part of it. But in either case, you should check what is filling up /var/ as the package cache should not be a major issue. Are logs filling up? In other words, are you ignoring your computer screaming at you about some other problem?

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yeste

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yesterday. Anyone else having this problem? Thanks.

I am having the same problem and took the following steps to mitigate it to no avail.
1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
Please advise.

Error Log while activation of info cube.

Hi All,
While activating the cube i'm getting the below error log.I though there there was an problem with installation.Again if i re-install also i'm getting the same problem.and i'm unable to any data and also my info source is not getting activated.. Coh\uld any one help me in this regard.......
The error's are :
Database log: RSDGCA2021121810:23:20
Program start============================================================
Mass activation
=========================================================================
Process..................: system_1
User.....................: SAPUSER
Date, time...............: 18.12.2021, 10:23:20
Platform.................: CUSTOMER-SAN(620)/ORACLE/WindowsNT/system
Tool.....................: RSA1/RADMASG0
Log......................: T, RSDGCA2021121810:23:20
Program parameters:
Input medium..............: Direct object entry
Activation method.........: Activ
Chk. mode.................: G
Version to be activated...: M
Versions to Be Deleted....: All versions are deleted
Lock against paral. exec..: Shared
Parallel mode.............: Switched off
=========================================================================
Number of objects to be analyzed: 11
Number of relevant dependencies: 6
Level 1:9 objects assigned, 6 less dependencies
Level 2:2 objects assigned, 0 less dependencies
Graph_Analysis: 11 objects on 2 topological levels
Start phase 001 **********************************************************
Activation of objects
Activate objects at level 1
Synchronous execution, no parallel processing *
Activate table /BIC/DIC_SRI1
Table /BIC/DIC_SRI1 was activated successfully
Activate table /BIC/DIC_SRIP
Table /BIC/DIC_SRIP was activated successfully
Activate table /BIC/DIC_SRIT
Table /BIC/DIC_SRIT was activated successfully
Activate table /BIC/VIC_SRI2
Table /BIC/VIC_SRI2 was activated successfully
Activate table /BIC/VIC_SRIH
Table /BIC/VIC_SRIH was activated successfully
Activate table /BIC/VIC_SRII
Table /BIC/VIC_SRII was activated successfully
Activate table /BIC/VIC_SRIJ
Table /BIC/VIC_SRIJ was activated successfully
Activate table /BIC/VIC_SRIM
Table /BIC/VIC_SRIM was activated successfully
Activate table /BIC/VIC_SRIT
Table /BIC/VIC_SRIT was activated successfully
Synchronous processing: 1 sec., 9 objects, 9 costs
Activate objects at level 2
Synchronous execution, no parallel processing *
Activate table /BIC/EIC_SRI
Table /BIC/EIC_SRI was activated successfully
Activate table /BIC/FIC_SRI
Table /BIC/FIC_SRI must be created in the database
Adjust table in DB >>>
sql:
CREATE TABLE "/BIC/FIC_SRI"
("KEY_IC_SRIP" NUMBER (000010)
DEFAULT 0 NOT NULL,
"KEY_IC_SRIT" NUMBER (000010)
DEFAULT 0 NOT NULL,
"KEY_IC_SRIU" NUMBER (000010)
DEFAULT 0 NOT NULL,
"KEY_IC_SRI1" NUMBER (000010)
DEFAULT 0 NOT NULL,
"/BIC/PR_SRI" NUMBER (000017, 000002)
DEFAULT 0 NOT NULL)
PCTFREE 10
PCTUSED 60
TABLESPACE PSAPSAN
STORAGE (INITIAL 0000000016 K
NEXT 0000010240 K
MINEXTENTS 0000000001
MAXEXTENTS UNLIMITED
PCTINCREASE 0000
FREELISTS 004
FREELIST GROUPS 01)
PARTITION BY RANGE (KEY_IC_SRIP)
PARTITION "/BIC/FIC_SRI0" VALUES LESS THAN (0))
ORA-00439: feature not enabled: Partitioning
DDL time(___1): .........3 milliseconds
The SQL statement was not executed
Table /BIC/FIC_SRI (Error adjusting the database)
Table /BIC/FIC_SRI was not activated
Synchronous processing: 0 sec., 2 objects, 2 costs
Activation of objects
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Final log
Following objects not activated/deleted or activated/deleted w. warning:
Table /BIC/FIC_SRI could not be activated
(E- Table /BIC/FIC_SRI (Error adjusting the database) )
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on activated and deleted objects
Number of objects to be activated............: 11
Objects not activated........................: 1
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 10
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on activated and deleted objects
End phase 003
Process..................: system_1
Return code..............: 8
| Date, time...............: 18.12.2021, 10:23:22

Hi
Your E-table of the Cube is not getting activated try activating it from SE11.
orelse try program RSDG_CUBE_ACTIVATE to activate the cube .
See the Mappings again -- try to activate entire data flow again.
Hope it helps
Edited by: Aduri on Dec 18, 2008 11:21 AM

Error logging on primary key

Hello,
Here is the context :
- The DB (10.2) is in production. I can not disable/drop/alter constraints
- I have to reinject thousands of rows from another DB through database link but some of thoses lines may be rejected by the primary key / unique key in the production DB
- As the row number is very large, I do not want to do the following :
<pre>insert into t_prod ( ...)
select ... from t_remote@db_link
where ...
and .. not in (select ... from t_prod where ..)</pre> ;)
As the constraints are UK/PK, I can not use the error logging in insert statement
As the constraints must be kept enabled, I can not use the exceptions into in an alter constraint statement
Is there any way to avoid the infamous not in select ?
Thanks,
Christian.

I prefere to use the SQL documentation over the Admin Manual (very personal preference). http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm#BGBEIACB
Often it is more clear. In this case:
REJECT LIMIT
This clause lets you specify an integer as an upper limit for the number of errors to be logged before the statement terminates and rolls back any changes made by the statement. The default rejection limit is zero. For parallel DML operations, the reject limit is applied to each parallel server.
A reject limit of 0 would be mean, zero errors are logged before the statement terminates and rolls back.
I agree that this is the same as "no error logging". Good thing you pointed this out, I was not aware of it myself.

OWB 10gR2 Does not support DML Error Logging

I've just had this confirmed by support.
So Oracle's key ETL tool does not support 10gR2s key ETL feature DML Logging.
So far set based loads on large volume databases you are going to find yourself being tripped over into row by row processing.
I find this staggering.
Has anyone else found this?

Oracle has come back to us saying that
"DML error logging feature is not supported for distributed DML."

DML Error logging for Update statement

Hello,
I am facing a problem with regard to DML Error logging with Update statement .
oracle : 10.2
I am executing following DML update:
BEGIN
UPDATE
table_1 a
SET a.Exp_DATE =a.EFF_DATE
WHERE a.col_a1 != (SELECT b.colb1
                     FROM table_2 b
                     WHERE a.msisdn =b.msisdn )
LOG ERRORS INTO table_1_ERR REJECT LIMIT UNLIMITED;
END ;    I was expecting that "ORA-01427: single-row subquery returns more than one row" would be captured in LOG error table "table_1_err"
but instead I got run time error and whole dml was rolled back.
Please let me know whether this exception is not captured by DML error logging.
Thanks,
Abhishek

*Oracle logs the following errors during DML operations:** Column values that are too large.
* Constraint violations (NOT NULL, unique, referential, and check constraints).
* Errors raised during trigger execution.
* Errors resulting from type conversion between a column in a subquery and the corresponding column of the table.
* Partition mapping errors.
>
http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/transform.htm#sthref777

Error logging approaches

I would like to hear how people have implemented various error
logging approaches in Forte applications.
Forte produces log files automatically for service partitions in
$FORTE_ROOT/log and pops up dialog boxes with uncaught exceptions
for client partitions.
Some of the current problems with the existing Forte error logging
include the famously painfull task of determining which log file
in the $FORTE_ROOT/log pertains to your partition and how to
correctly log client errors.
We have taken the approach of opening our own error file for each
Forte project containing a start class method. All exceptions are
then caught and written to the application error file. This takes
the guess work out of finding the correct error file but raises
some interesting design questions:
1) Should service objects maintain their own error files or should
all problems just be handled as exceptions to be logged by the
calling method. ( In some cases the calling method may not care
that a service object is having a problem. In this case the service
object may try an alternative approach. If the request is finally
filled an error with the service object's functioning has occurred
but not with the calling method's functionality ).
2) Should all error messages be handled by a central message
logger operating as a service object. In this case if various clients
are running on different platforms all error message from an
application are centralized. This saves the effort of checking error
files for the same application on multiple platforms. It also means
that a separate error file does not need to be created for each
client that is instantiated. The message logger service in this
case could be accessed by reference among several applications.
Paul Buchkowski
Merrill Lynch Canada
[email protected]

Never mind...my password to access file server contained a character that was not acceptable. Once changed, access restored.

Question on Time Machine error log

I have a program (Time Machine Error Log) that keeps track of the message log entries that occurr after you do a Time Machine backup.
I am getting two messages each time Time Machine completes a backup.
Here are the two message from the last log:
Jan 13 17:39:29 xxxxxx-iMac.local com.apple.backupd[36854]: Error: Error Domain=NSOSStatusErrorDomain Code=-36 "The operation couldn‚Äôt be completed. (OSStatus error -36.)" (ioErr: I/O error (bummers)) deleting backup: /Volumes/Time Machine Backups/Back
Last Successful Backup Message:
Jan 13 17:39:37 xxxxxx-iMac.local com.apple.backupd[36854]: Backup completed successfully.
How can there be an error reported stating "deleting backup", then a message stating "Backup completed successfully"?
If I didn't check the log, I wouldn't know that there was a problem, because the Time Machine preferences pane tells me the last backup time, and the next backup time, indicating all went well.
I just need some verification that my backups are completing successfully.
Thank
Len

There is a lot of rubbish messages that TM produces.. if the final message is that all is good, then I would say all is good.. it is pretty quick to decide when something isn't good.
But I would say.. there is only one way to know a backup is good. Restore it.
You don't need to test restore over current drive.. plug in an external drive and restore.
You can do a verify.. hold the option key whilst clicking the TM icon in the top menu area.. and the option verify will appear.. click that. It really doesn't test more than files are readable though, AFAIK.
Do a disk image occasionally.. Disk Utility can create an image.. but superduper even free download version can do a full disk image. Makes me feel safer knowing that I have a backup TM doesn't actually have anything to do with.

Server Agent job failing but not writing to Error log

We recently migrated from Server 2003 to 2008 R2 running Microsoft SQL Management Studio 2008. We've had a few bumps along the road but my main concern is a SQL Server Agent job that runs at 1:00 AM is failing part way through. Some of the work is
done but not all. The Job Activity Monitor reports it failed but nothing goes in the Error Log. The job did run successfully last week during tests but these failures came after going live and bring over the latest data.
I guess I really need help in diagnosing the lack of information in the Error Log. If I had that data I can begin to follow the bread crumbs to the actual problem.

The Job Activity Monitor reports it failed but nothing goes in the Error Log.
The Agent writes error to it's own log file, called SQLAGENT.OUT, it's also located in LOG subfolder and you also can look it up in SSMS from node "SQL Server Agent"
Olaf Helper
[ Blog] [ Xing] [ MVP]

|Error SQL: ORA-14400: inserted partition key does not map to any partition

I have an installation of ECC6 with BI7 in which consolidated through SEM-BCS OBCS_C10 with the cube, which I have version 100 for fiscal data, 101 data for IFRS and IFRS Copying a 301 version.
The client will ask me the empty version of the 301 in the cube OBCS_C10.
Before switching to empty the cube "Target Real-Time Data Can Be Loaded With Data; Planning Not Allowed."
To empty the cube using transaction RSA1 / manage / contents / Delete Selection.
However, the data is not erased and revise the job gives me the error:
Resumen log job para job BI_INDXD51A1NTCIYWU06OKZZESN1R94 / 07520600
Log job
Hora
Txt.mje.no codificado
04.02.2009
07:52:06
El job ha sido lanzado.
04.02.2009
07:52:06
Paso 001 iniciado (programa RSINDEX1, variante &0000000000108, usuario ACHUY)
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
CREATE TABLE "/BI0/0100000076" PCTFREE 00
04.02.2009
07:52:10
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:10
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:10
0000000016 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:10
UNLIMITED PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:10
FREELIST GROUPS 01) AS SELECT DISTINCT DIMID FROM
04.02.2009
07:52:10
"/BI0/D0BCS_C101" "DIM" , "/BI0/SCS_VERSION"
04.02.2009
07:52:10
"MD1" WHERE "DIM"."SID_0CS_VERSION" = "MD1"."SID"
04.02.2009
07:52:10
AND ( "MD1"."CS_VERSION" BETWEEN '301' AND '301'
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
CREATE TABLE "/BI0/0100000030" PCTFREE 10
04.02.2009
07:52:25
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:25
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:25
0000000000 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:25
2147483645 PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:25
FREELIST GROUPS 01) PARTITION BY RANGE
04.02.2009
07:52:25
("KEY_0BCS_C10P") ( PARTITION "/BI0/F0BCS_C100"
04.02.2009
07:52:25
VALUES LESS THAN (0) TABLESPACE "PSAPSR3",
04.02.2009
07:52:25
PARTITION "/BI0/F0BCS_C100000000019" VALUES LESS
04.02.2009
07:52:25
THAN (0000000019) TABLESPACE "PSAPSR3", PARTITION
              |
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000276" VALUES LESS THAN
04.02.2009
07:52:25
(0000000276) TABLESPACE "PSAPSR3", PARTITION
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000277" VALUES LESS THAN
04.02.2009
07:52:25
(0000000277) TABLESPACE "PSAPSR3") AS SELECT *
04.02.2009
07:52:25
FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT
04.02.2009
07:52:25
IN ( SELECT "DIMID" FROM "/BI0/0100000076"
04.02.2009
07:52:29
SQL-END: 04.02.2009 07:52:29 00:00:04
04.02.2009
07:52:29
Error SQL: ORA-14400: inserted partition key does not map to any partition
04.02.2009
07:52:29
Error de sistema: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000030 14400
04.02.2009
07:52:29
El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
Someone has an idea how to fix this?

This is the SQL of the insert
The partition condition of the table is the column ("KEY_0BCS_C10P")
SELECT * FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM "/BI0/0100000076" )
This is the info of the /BIO/0100000076 TABLE
SQL> SELECT "DIMID" FROM sapsr3."/BI0/0100000076";
     DIMID
         6
SQL>
And this are the rows that I think are not included in the partitions of the table
1 SELECT DISTINCT KEY_0BCS_C10P, KEY_0BCS_C101 FROM SAPSR3."/BI0/F0BCS_C10"
2 WHERE KEY_0BCS_C10P > 277
3* AND "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM SAPSR3."/BI0/0100000076" )
SQL> /
KEY_0BCS_C10P KEY_0BCS_C101
          284             4
          285             4
          293             3
          292             4
          293             4
          293             5
          285             3
          290             4
          292             5
          283             4
          285             5
KEY_0BCS_C10P KEY_0BCS_C101
          291             5
          292             3
          291             4
14 rows selected.
SQL>

Errors.log took over /var partition estate

Similar Messages

Maybe you are looking for