Errors not recognized

after trying several times to install the last update I'm giving up and seeking assistance! Durring the attenpted update, the process stops(hangs) at 14% and the eventualy restarts and informs that it was unable to complete the instalation and that nothing
had been changed. This however is not exactly true! All kinds of "non- system" files are fair game, and the ones affected have been different every time. Needless to say I'm not in the best mood at this time but need to complete this update to be
of any possible good for the evaluation. I've tried to enter the error dialog but it is not recognized by the system! Any thoughts or suggestions?

Hi milazzorob,
Would you mind to find the setupact.log file and then upload it to OneDrive, and post the shared link here?
windows.~bt\Sources\Panther
Make sure we have shown hidden files under folder options:
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Adobe download (error)not recognized w/ my MAC since FF3.6.12 installed

    My Mac is 10.6.4 and I updated FireFox 3.6.12 in Oct. Since then, if I'm in a website (e.g.APS) to download my statement I used to get it downloaded into a PDF. Now I get a download error message saying it cannot open the .acx file extension. I get this same error message whether I'm in any website I need to download something. I can download fine if I'm using my Safari. I have uninstalled Reader 9.4 along with Flash Player and re-installed both w/o any luck in being able to download files in any website. The Unable to download or save files HELP didn't have anything that worked to correct the problem. Is this a bug w/ FireFox 3.6.12 with Macs? I did not have this download error problem before updating to 3.6.12.

    Has anything else changed?
    Does the problem persist across a system restart?
    You might try a restart in safe mode, then an ordinary restart - sometimes that cures weird failures.

  • Bootcamp error: not recognizing disc

    I have a macbook pro 13" with OS X Lion 10.7.5. My main objective recently is to get my CAC card reader to work and actually be recognized on my mac. I tried everything i could think of to get it to work. Nothing. SO...since the CAC card reader is mainly for Windows i found out that i can run windows on my mac and decided to do so.. Blah blah...
    So i downloaded an .iso file of Windows 7 Ultimate 64-bit and used disk utility to burn it to a DVD. It said it was successful. I went into boot camp, downloaded the support software, success.I reinserted the DVD and for some reason i got the pop up stating that the disc I just inserted was blank when i knew it wasnt because i double checked and disc utility tells me that its not. Well when i got to the install part, bootcamp came back with a message stating "installer disc could not be found." I would like to know a few things:
    If you can help get the CAC reader to work i'd appreciate it.but
    What windows do i need? 32- or 64-bit? Can it be an iso? Or do I have to convert it to a bootable DVD.? Ive read the boot camp instructions but they really werent any help.
    Most of my questions are based on things i found while searching for answers only to get more questions.Anyone? Step-by-step would really help. And possible things i may encounter with solutions. Ive been at this for days and I'd rather not beat around the bush anymore, if you know what i mean.

    Ok my mac needs 32 bit and i think I can just do ultimate. CD will not work at all. Ever. USB is for the support software, i cant take windows from it and use it to put windows on my mac. Boot camp requires a disc of some sort.  How do i burn the DVD at the lowest possible speed in disc utility.?

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I just figured it out. All I had to do was close out of iTunes then restart.

  • TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

    Hello!
    I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
    I could really use some help solving this.
    I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
    Help a brother out, will you???

    Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
    It was for an IPOD so you can see those details in the link.
    Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
    - Turn off computer.
    - Plug Shuffle into usb.
    - Then you must reset your shuffle
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
    - Start computer and it should install the usb driver for the ipod automatically.
    - Your i pod will say do not unplug so don't. then open itunes and it will be there.
    I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
    Just remember to not only eject ipod from itunes but stop usb.
    Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
    Stop it and select "apple ipod".

  • My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • "USB Device Not Recognized" error when I connect iPod to my PC

    I have a brand new 5th gen (I think) iPod.
    I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
    Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
    I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
    Can anyone suggest anything ?
    I've tried the 5R's as far as I can, and I read through this thread:
    http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
    but there didn't seem to be anything conclusive.
    Thanks for any help,
    Jill

    First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
    Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

  • IPad air not recognized in Windows 7: Error: \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel.

    Hello everyone.. I recently bought iPad air and I am trying to connect it to my windows 7 notebook. And so I am trying to install itunes in windows 7. But I keep on getting the error message:
    "\SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel."
    I already did this: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx that was given in this thread:
    https://discussions.apple.com/thread/1558225?tstart=0
    But unfortunately I still get the error message during installation. If I ignore that and continue installation, iTunes is installed and seems to work. But my windows does not recognize my iPad. I read somewhere that iPad driver is in iTunes.
    Please help... thank you very much.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

    I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

Maybe you are looking for

  • Decent Saxophone Samples - Where can I find some for the EXS24?

    I'm writing for a line up that includes Baritone and Tenor Saxes. The Logic samples grate on my nerves...THEY SOUND LIKE RASPING KAZOOS!! Please, please... can anyone recommend good saxophone samples for the EXS24 - anything a little bit softer, more

  • Accessing iPhone Music

    Greetings all... I recently had a rather unfortunate hard drive crash of my Macbook Pro (currently in repair at Apple). Most of my data was backed up...however, there are several sets of photos and some recently purchased music that I did not have ba

  • Ipad2-apps wont open!

    Hello, I can not open any app nor can open my icloud anymore. They open and immediately close again. Can anybody help me?

  • Inspection lot not updated with Task list and sample

    Hi, I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found' When i create an inspection lot system is picking u

  • 2.0.1 Firmware

    Anyone get the download link for 2.0.1 firmware, it's too long for me to download from itunes. Many tahnks.