Errors occur during executing consistency checks

Hi all,
During my phase"executing consistency checks", errors occur :
X_STXH| Sender structure S_STXB is not assigned to the receiver structure R_STXB.
It happened in PC001_PCL_CHECK sub-activity.
The details as follows:
ubactivity PC001_PCL_CHECK was started on 08.03.2009 at 22:10:02 by user LEEE03 | |
Check COBJ started at 08.03.2009 22:10:30 by LEEE03
Check COBJ finished at 08.03.2009 22:11:04 by LEEE03
Check HIER started at 08.03.2009 22:11:04 by LEEE03
Check HIER finished at 08.03.2009 22:11:04 by LEEE03
Check RELS started at 08.03.2009 22:11:04 by LEEE03
X_STXH
Sender structure S_STXB is not assigned to the receiver structure R_STXB
X_STXH
Sender structure S_STXB is not assigned to the receiver structure R_STXB
X_STXH
Sender structure S_STXB is not assigned to the receiver structure R_STXB
X_STXH
Sender structure S_STXL is not assigned to the receiver structure R_STXL
X_STXH
Sender structure S_STXL is not assigned to the receiver structure R_STXL
X_STXH
Sender structure S_STXL is not assigned to the receiver structure R_STXL
Check RELS finished at 08.03.2009 22:11:20 by LEEE03
Check RULE started at 08.03.2009 22:11:20 by LEEE03
Check RULE finished at 08.03.2009 22:11:29 by LEEE03
Check DICT started at 08.03.2009 22:11:29 by LEEE03
X_STXH
Field TDNAME does not exist in the sender structure on sender system
X_STXH
Field TDOBJECT does not exist in the sender structure on sender system
X_STXH
Field TDID does not exist in the sender structure on sender system
X_STXH
Field TDNAME does not exist in the sender structure on sender system
X_STXH
Field TDOBJECT does not exist in the sender structure on sender system
X_STXH
Field TDID does not exist in the sender structure on sender system
Check DICT finished at 08.03.2009 22:11:29 by LEEE03
Check FIMA started at 08.03.2009 22:11:29 by LEEE03
Check FIMA finished at 08.03.2009 22:11:31 by LEEE03
Check RUMA started at 08.03.2009 22:11:31 by LEEE03
Check RUMA finished at 08.03.2009 22:11:31 by LEEE03
Check SELS started at 08.03.2009 22:11:31 by LEEE03
Check SELS finished at 08.03.2009 22:11:33 by LEEE03
Subactivity PC001_PCL_CHECK was completed on 08.03.2009 at 23:11:40 with status ERR
I have searched in sap marketplace and also google, no results come out.
Could anybody help me out?
Thanks.
Best Regards,
Eric Lee

I've implemented the note 1101544 in the central system
executed the report Z_CNVTDMS_08_FIELD_SET with P_PHASE to 'S'.
and after this, I re-executed the activity "Execute Consistency Checks" from the extended mode of the process tree several times.
But it remains the same issue.
Did I miss anything?

Similar Messages

An internal error occurred during the authorization check.

Hi,
Need help,
While deleting chain in order to create Meta chain.I am getting this Error message.
Thanks

Hi,
I am creating a meta chain.When i am trying to add local chain in it.Through general services tab >> start process.A dialog box appears asking me to delete one of the chain and the other one will act as both.When i am clicking yes then i am getting this msg.
An internal error occurred during the authorization check.
Edited by: Niraj Sharma on Aug 12, 2009 11:19 AM

Error BM311 during Model Consistency Check in APO

Hi APO Experts
I find error BM311 - Units of different dimensions cannot be converted during Model Consistency Check in APO.
How can I get to know the code or Unit of Measure, where the inconsistency is there to rectify?
Please suggest.
Thank you.
Pradipta Sahoo

Hi Pradipta,
Can you check below notes:
943543
928502
837310
Regards,
Mukesh Pandey

Error occurred during budget check

Good Morning PS Gurus<
We are unable to increase the quantity of the matearil
in project & save. It’s throwing error
Error occurred during budget check, see cost protocal
Message Number :IW172
Diagnosis:
An error occurred during budget availabilty check
Procudure:
Display the cost determination log for the order or network plan for more detailed information.
We do’t have budget in our project. I checked budget TL ( it said warning message:1)
Please throw light on this issue.
Thanks
PY

Hello Team,
When i select the network-activityà extrasà logsà cost calculation.
It said WBS <<PRO1234> do't exist CJ021
Please help.
Thanks
PY

MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant to repair damaged index did not work

After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?

If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

Proxy Activity terminated because errors occurred during package checks

Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
Goutham

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

Error occured during budget check while planning in network activity

Dear All,
i have created a project with 4 WBSE. i have assigned budget to one of these WBSE and released that project. than i want to do planning in next WBSE this is giving error while saving this planning as Error occured during budget check, see cost.
i have created user status for budgeting like if we have not budgeted than WBS is not able to release. i have added availability control as Forbidden while not budgeted but this not effective.
please suggest me some thing to remove this problem
thanks
Sunil

hi,
In WBS you can Plan and budget to group WBS , the below wbs will consume budget form top.
Proj>WBS1(Group WBS- Plan/Budget) it is applicable for below all wbs elements say WBS2>WBS3
When you are determining Hierarchy you should create WBS in same levels then only you can allocate Budget.
If you wan to allocate budget for WBS2 and WBS3 separately.
Proj
WBS1
WBS2                    WBS3
     WBS2A                   WBS3A
          WBS2B                    WBS3B
               WBS2C                         WBS3C
Proj>WBS1 (it will no more act as Group wbs element) then you can directly plan and budget for below wbs elements WBS2 and WBS3.
Below hierarchy will consume budget from as displayed above.
Note: In you case as per my understanding return budget make zero, then plan and budget the same it will work.
Thanks and regards
Sadiq

IW172 : Error occured during Budget Check see Cost Protocol

Hello Guru's
While creating Capital Reservation in the Network i am getting the error " IW172 : Error occured during Budget Check see Cost Protocol" In making reservation we don't book any cost in the reservation.The Resv is charged by making SR.The amount is still available against the WBS Element.Please suggest what needs to be done.
From
Aashutosh

Check whether the following note helps you:-
Note 551677 - Process order: Availability control against WBS element
G. Lakshmipathi

Activity terminated because errors occurred during package checks

Hi Experts,
i am working on File to Proxy scenario.while i am trying to activate genarated proxy objects i am getting below eror.
Activity terminated because errors occurred during package checks .
anybody pls resolve the issue.
regards,
bhuvan.

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

Execute Consistency Checks - Sub-activity - PC001_PCL_CHECK I have error

Hello!
I use TDMS version 3.0 SP 17. Process Type - ERP Initial Package for Time based & Company Code Reduction.
In phase System Analysis - Start Programs for Generation and Receiver Settings - Execute Consistency Checks - Sub-activity - PC001_PCL_CHECK I have error:
Errors detected for conversion object TVKOV :
TVKOV: member ID_VKORG of group G_VK has no selref field!
Errors detected for conversion object TWPA :
TWPA: member ID_WERKS of group G_WE has no selref field!
Errors detected for conversion object TWRF2 :
TWRF2: member ID_BUKRS of group G_BU has no selref field!
and
Errors detected for conversion object MARV :
MARV: member ID_BUKRS of group G_BU has no selref field!
What should I do?
Thank you.
Best regards,
Denis Gaykov

Hello!!
I've implemented SAP note 1536915 but don't corrected the problem. I still have errors of type:
Errors detected for conversion object MARV :
MARV: member ID_BUKRS of group G_BU has no selref field!
Errors detected for conversion object TVKOV :
TVKOV: member ID_VKORG of group G_VK has no selref field!
Errors detected for conversion object TWPA :
TWPA: member ID_WERKS of group G_WE has no selref field!
Errors detected for conversion object TWRF2 :
TWRF2: member ID_BUKRS of group G_BU has no selref field!
Thanks.

Errors occurred during the extraction in RSA3 - Extractor Checker

Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.

HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya

Errors occurred during the extraction datasource of CRM System in Check extractor

Dear All,
Please find the below error's while I am extracting data from the data source in CRM.
RM_QUOTA_ORDER_I: Table SMOXHEAD contains no BDOC name .
Errors occurred during the extraction in Check extractor.
Please let me know solution to resolve the issue.
Thanks
Regards,
Sai

Hi,
Where your getting this error?
during info pack load or checking at crm system RSA3?
if your running your info pack then please run data source at RSA3.
Seems like your source table may not have any bdocs.
Where your runing this loads? prod or dev?
Thanks

Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David Baur

I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur

Acrobat PDFMaker Office COM Addin for Microsoft Office 365 does not work. When I check the cox for COM Add-ins, it unchecks it. "A runtime error occurred during the loading of the COM Add-in." I use Adobe X Professional. The Add-in worked fine in Office 2

I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I use Adobe Acrobat X Professional.
I have restarted Outlook, restarted my computer, and nothing changes.
Does anyone have a solution?
Steve

I do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

Errors occur during executing consistency checks

Similar Messages

Maybe you are looking for