Errors occured as the GLaccounts were being saved

Errors occurred as the G/L accounts were being saved
    Message no. FIPOS019
Diagnosis
    The commitment item cannot be assigned to the G/L account because the
    state of the G/L account does not permit this transaction.
System Response
    The G/L accounts affected are not saved. They have the status
    Inconsistent.
    If you have created a new commitment item for the G/L accounts, the
    system saves that commitment item.
Procedure
    Correct the G/L accounts, thereby making entry of commitment items
Check the relevant G/L accounts: Change G/L Account.
It is possible that the commitment item field is hidden in the field
status group for the G/L account.

HI,
Check if the commitement item is the lowest node in the hierarchy...
May be Balance sheet account does not accept budgeted commitement iten..
Regards,
Chintan Joshi

Similar Messages

  • HT4191 I have lost several days notes with the note app. What could be the issue? I have attempted to sync with my email account but noticing appears in my email. I thought this would act as a backup. Also how do I verify where the notes were being saved

    I keep losing notes once I've added them. I don't know how to confirm where they are being stored. I'm wondering if the storage could be full. Also tried to sync with my yahoo account thinking that might help. But not sure how I get existing notes to sync with the account....they didn't  show up once I turned that feature on.

    were using icloud?
    you can check to see if there by logging into your account at icloud.com

  • Fatal Error has occured and the application is being terminated

    It seems that Captivate is eating my projects.  I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files.  It set me back at least a few hours worth of work.  So I started creating backup files every 10mins, regardless of how much work i've done.  Everything was going fine, until I took an hour break and went to resume my work.
    When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files.  Please restart Adobe Captivate."
    I can click on the program workspace and not click ok on the error message to keep the file open.  I see my slides and objects, but all the text is missing.
    I'm using Captivate 5.5 and windows 7 64.  Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images.  I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
    When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue.  That was before this last stint of errors.
    I tried opening a backup that was like 10 saves ago, but it displays the same message.
    I'm not sure what to do next.

    Failed to back up the data. A fatal error has occured and the application is being terminated.
    This question is Not Answered.(Mark as assumed answered)
    hi,
    I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
    Adobe Captivate
    A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
    Please restart Adobe Captivate.
    OK 
    I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
    Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
    Please help me out to deliver my work.
    Thanks
    CD

  • Failed to back up the data. A fatal error has occured and the application is being terminated.

    hi,
    I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
    Adobe Captivate
    A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
    Please restart Adobe Captivate.
    OK  
    I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
    Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
    Please help me out to deliver my work.
    Thanks
    CD

    We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
    Yes, we were using a network drive but now we've switched to locally stored content.

  • Error RCIRAS0546, failure occured while the report was being processed

    Hello all,
    We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
    "Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
    In de /var/log/messages, I get messages like these:
    Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
    Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
    I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
    The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
    I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
    It seems that several subprocesses start for retrieving data based on the parameter values.
    After the crash of the first child, the above mentioned error occurs.
    2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
    2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
    2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
    2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854]  RAS-CORE-METRICS  (before cleanup) number of child processes = 3
    2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
    2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
    2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
    2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
    2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
    2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
    Does someone know this problem and what to do about this?
    With kind regards,
    Pim van Stam
    SvSnet

    We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

  • Error: Your request could not be completed because a failure occurred while the report was being processed.

    Post Author: sagimann
    CA Forum: Deployment
    Hello,
    I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
    My env is:
    Solaris 10 64 bit
    Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
    BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
    Important bouser env:
    ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
    TNS_ADMIN=$ORACLE_HOME/network/admin
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
    I reboot the box, then start BO like so:
    cd /opt/reporting/bobje
    . setup/env.sh
    ./mysqlstartup.sh
    ./startservers
    ./tomcatstartup
    Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
    Error:
    Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
    This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
    May  5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
    pls advise,
    thank you.

    The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
    The explanation, from a comment in the above linked blog post:
    "To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
    Edited by: abirdman on Feb 3, 2012 9:49 PM

  • Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

    Hi,
    I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
    I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
    When I login to owa for user test1 and preview the attachment it works fine.
    However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
    " An error occurred while the document preview was being created. Please try again later " as follows
    I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

    Hi,
    To narrow down the cause, I’d like to recommend the following troubleshooting:
    1. Does the error appear when you directly access test 2 mailbox through OWA?
    2. Check if there is 141 error in your event log.
    3. Check whether Office web app server connects with Exchange server when the issue happens.
    Access the URL: https://hostname/hosting/discovery
    4. Grant full access permission again and check the result.
    For more information about Office web app integration with Exchange, please refer to the following article:
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.   Please restart Adobe Captivate.

    I was trying to capture a simulation when a pop-up window came with this error:
    "A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.Please restart Adobe Captivate."
    I tried every possible solution but i am getting the same error. Even now, i am not able to open a blank project. I cleared Preferences and Cache, Restarted the system, uninstalled and re-installed captivate but the error occurs.
    Please help.

    Having admin rights is not the same as 'Run Captivate as administrator'. For the last, right-click on the start icon for Captivate and check 'Run as administrator'. Or click on Advanced, where you can check the option to always run as administrator.
    Another possibility could be a corrupt font somewhere. I forgot to ask which version you are using (exact number).

  • Error occurred in the source system

    Hi,
    I am receiving the below error while loading data from APO system
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    ******On further investigating the error message I get the following Diagnosis and Resolution details.*****
    Diagnosis
        The sequence for creating time series in LiveCache is:
        1.  Characteristic value combinations are created which in turn create
            planning object in the system
        2.  The combination of version, planning area, and planning object is
            initialized, creating time series  in LiveCache. This combination is
            so to speak the LiveCache anchor.
        This error occurs if
        o   New characteristic value combinatons have been created for the
            master palnning object structure that is assigned to the planning
            area, but the time series objects were not created.
    System response
         Processing cannot continue.
    Procedure
         There are two methods of creating time series objects for individual
         characteristic value combinations:
             a)  Re-initialize the version without deleting the time series
                 objects beforehand.
             b)  Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
         In general SAP recommend that when you generate new characteristic value
         combinations, you set the Create time series objects indicator.  This
         prevents this error from occurring.
    Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
    Regards,
    Tyson

    Hi tyson,
    Has it run good before? if yes, try to restore the source system.
    by right click on the source system then choose restore.
    It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
    hope it help. Give point if you see its helpful.
    Chuong Hoang

  • Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

    adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
    I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

    This did not resolve my issue, it actually made things worse. I did what
    you had told me to do below, and it did not work. Tried to access the
    internet to respond back to you and my computer was not able to reach the
    internet. Tried reaching adobe support and not was able to, even tried
    calling was on the phone for 20 minutes and no one answered. I was not able
    to re install windows. Contacted Asus from another computer and they were
    not able to help me reinstall windows They had asked me to ship my computer
    back to them, due to them not being able to resolve the issue and help me
    reinstall windows. I luckily had a backup on my external hard drive and was
    able to reinstall windows 8. Spent over an hour and half trying to fix
    that. Here I am still not able to install adobe reader. I was very unhappy
    with what I was told to do and it gave me this issue.
    ·  Open an Administrator command prompt: Right-click Start > All Programs >
    Accessories > Command Prompt and select Run As Administrator. Click Allow
    for the elevation prompt
    ·  In the command prompt, type the command below:
    fsutil resource setautoreset true C:\
    The line above assumes that C: is the drive in which Vista is installed. If
    it is installed on another drive like D:, change the drive letter
    appropriately.
    ·  Restart the system.
    ·  Install Acrobat or Adobe Reader again.

  • Oops... a server error occurred and your email was not saved.

    after completion of mail content when try to send the message error shows as
    "Oops... a server error occurred and your email was not saved."
    This problems are being experienced very often since installation of Firefox version 5.0

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • Error occurred in the data selection

    Hi Expert,
    I met issue when full loading data from R3 via customized datasource.
    the error message in request monitor is:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
    I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
    I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
    Could u pls tell me how to solve this issue? Thanks.
    Eileen

    Hello Eileen zhang,
    I have exactly the same error as you,  do you still remember how did you solved this problem?
    Regards,
    Thanks,
    Maria João
    Error message:
    "Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • An error occured on the server while reading settings

    Hi to everyone,
    Today i renewed my server's Profiles Manager Code Signing Certificate following this link http://support.apple.com/kb/HT5358
    The certificate was renewed sucessfully for one year.
    I switched the Profile Manager Off then next to "Sign configuration profiles" i clicked the Edit button and from the Certificate list, i selected the certificate named "myserver.mydomain.com Code Signing Certificate - myserver.mydomain.com OD Intermediate CA" which was the only listed certificate that i had renewed.
    When i turned on the Profile Manager i faced the issue.
    An error occured on the server while reading settings so the Profile Manager can't start.
    From Logs
    Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_devicemgr'. Error: Error Domain=servermgr_devicemgr Code=1 "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendo r/rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb :941:in `initialize': could not connect to server: Connection refused (PGError)
    Is the server running locally and accepting
              connections on Unix domain socket "/Library/Server/PostgreSQL For Server Services/Socket/.s.PGSQL.5432"?
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 941:in `connect'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 941:in `connect'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 217:in `initialize'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 37:in `new'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 37:in `postgresql_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:223:in `send'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:223:in `new_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:245:in `checkout_new_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:188:in `checkout'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:184:in `loop'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:184:in `checkout'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor .rb:242:in `synchronize'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:183:in `checkout'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:98:in `connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:326:in `retrieve_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_sp ecification.rb:123:in `retrieve_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_sp ecification.rb:115:in `connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/base.rb:1299:in `table_exists?'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/config /initializers/settings.rb:10
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activesupport/lib/active_support/dependencies.rb:173:in `load_without_new_constant_marking'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activesupport/lib/active_support/dependencies.rb:173:in `load'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:622:in `load_application_initializers'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:621:in `each'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:621:in `load_application_initializers'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:176:in `process'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:113:in `send'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:113:in `run'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/config /environment.rb:55
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/railties/lib/commands/runner.rb:39
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /runner:3
    " UserInfo=0x7ff048a8dc20 {NSLocalizedDescription=/Applications/Server.app/Contents/ServerRoot/usr/share/ devicemgr/backend/vendor/rails/activerecord/lib/active_record/connection_adapter s/postgresql_adapter.rb:941:in `initialize': could not connect to server: Connection refused (PGError)
              Is the server running locally and accepting
              connections on Unix domain socket "/Library/Server/PostgreSQL For Server Services/Socket/.s.PGSQL.5432"?
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 941:in `connect'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 941:in `connect'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 217:in `initialize'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 37:in `new'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/postgresql_adapter.rb: 37:in `postgresql_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:223:in `send'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:223:in `new_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:245:in `checkout_new_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:188:in `checkout'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:184:in `loop'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:184:in `checkout'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor .rb:242:in `synchronize'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:183:in `checkout'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:98:in `connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_po ol.rb:326:in `retrieve_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_sp ecification.rb:123:in `retrieve_connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/connection_adapters/abstract/connection_sp ecification.rb:115:in `connection'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activerecord/lib/active_record/base.rb:1299:in `table_exists?'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/config /initializers/settings.rb:10
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activesupport/lib/active_support/dependencies.rb:173:in `load_without_new_constant_marking'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/activesupport/lib/active_support/dependencies.rb:173:in `load'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:622:in `load_application_initializers'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:621:in `each'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:621:in `load_application_initializers'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:176:in `process'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:113:in `send'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /../config/../vendor/rails/railties/lib/initializer.rb:113:in `run'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/config /environment.rb:55
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /rails/railties/lib/commands/runner.rb:39
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
              from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
              from /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/script /runner:3
    Do anyone can help me ? I will appriciate it so much.
    I' m looking forward to your reply.
    Thanks a lot.
    I

    You were right!! After macboo reboot the issue was solved the Profile Manager started again without problems!!
    Thaks a lot!!

Maybe you are looking for

  • WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application

    HI  when i am trying to open MSWord following message pop up and i can't open MSword any more: WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application. Please advise 

  • Running Mail in background

    is there a way to have Mail check for new mail at startup but in the background (kinda like how Finder and Dashboard does)? it's a little annoying to have Mail auto opening and sometimes having no new mail.

  • Mail ccs all outgoing email even though its turned off in preferences

    Recently mac mail started creating "ccs" for all my outgoing mail (several accounts). I have gone to preferences and "automatically cc/bcc myself" is unchecked. I have checked it and then unchecked it and still I get ccs and I don't want them.

  • Nokia 1520 camera grip?

    Hi! I'm looking for some help to reach nokia for an idea.  I would like to purchase the lumia 1520 and use the phone camera as my main point and shoot. However, a good grip and tripod mount compatibility option is a must for me. I saw the PD-95G came

  • Log & Transfer Trouble

    I've increased my ram so now the log and transfer works smoothly. Only now, several of the scenes are not transferring over to the Bin. The little ball twirls and the bar moves to completion. Then nothing. Once I touch it a red exclamation point appe