Errors occuring on applications....???

I have purchaced a few new applications, and when i go to sync them into my ipod, it says an error has occured and about 15 of my applications cannot be put into my ipod. Help please??? =[ lol
Message was edited by: sumiko7493

For what it's worth, I think the Touch starts to get unstable before that point.
I have 89 applications, and it seems like things were working fine at around 75 and then I ran into some sort of corruption issue in the high 80s where none of the apps run and it says the music and videos are gone.
With 89 applications, I cannot sync all the applications without this problem coming back.
What I did was to restore as new iPod, then cancel the initial sync (it tries to sync right away after setup), then set the apps to only install the ones I want. I trimmed down the installed list.
It is a very painful problem as the installation of the 89 apps took 3.5hrs each time and I've been through this a bunch of times trying to figure out what was wrong and to try different things. And that doesn't include music/videos.
Here are two posts that might be of interest:
http://www.ipodtouchfans.com/forums/showthread.php?t=89334
http://www.macrumors.com/iphone/2008/08/19/jobs-fix-for-iphone-apps-crashing-in- september/
BTW, the 2.0.2 software didn't fix this, although it seems it might have made it a little better.
-john

Similar Messages

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Unknown error occurred for application (application name) (id=5 [5], 5[5])

Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
Kenneth

Originally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps.

Sorry, an error occurred

Sorry, an error occurred
"This application cannot be installed because this installer
has been mis-configured. Please contact the application author for
assistance."
This error is throwing when, the application in updating
itself. Please help me in finding the solution.
Thanks,
Srikanth

Two things can cause this problem:
1. Version specified in the update() command differs from the
version in the updated file (you have to know to what version you
are updating before using the update() function)
2. The updated version and the installed version were signed
with different certificates (both files have to be signed using the
same certificate or you have to sign the new file with both the old
and new certicate using the migrate parameter)

The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

Hi,
I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
"The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
OS: WIndows Server 2003 SP2
Photoshop CS2
ANy help on this will be highly appreciated.
Thanks in advance,
Smiley

I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
Yes or No."
It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
CS3, so nobody gives a tinkers dam, I suppose.
I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

Itunes wont open, I get "itunes application could not be opened. An unknown error occurred (-50)"

I'm on Windows 7 - using itunes daily without problems and suddenly itunes wont open, I get "itunes application could not be opened. An unknown error occurred (-50)" The only thing I can think is I think there was a download in progress when I shut down the computer.
I tried uninstalling and reinstalled, but I get the same thing. I tried clearing the itunes folder and reinstalling, same thing. help!

Doublechecking. When you did the complete uninstall, were you using the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If damaged program files are involved here, a standard install might not remove them, and a reinstall might not then replace them. So the Verify iTunes and related components are completely uninstalled section is an important step.)

An error occurred while preparing the installation. Try running the application again

I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
      "Kernel Cache" = "/.IABootFiles/kernelcache";
      "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!

Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

The iTunes application could not be opened. An unknown error occurred (-50)

Today, I downloaded the latest version of Itunes.
When it finished installing it came up with the following error:
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I have uninstalled iTunes, and all related Apple software and re-installed iTunes several times and still I get the same error.
I contacted Apple support and was sent two emails. One detailing what needed to be uninstalled and then a web site to go to where I could download and install Microsoft's latest .NET Framework, which apparently was the root cause of the problem.
I did as instructed:Use the Control Panel to uninstall iTunes and related software components in the following order:
1.iTunes
2.QuickTime
3.Apple Software Update
4.Apple Mobile Device Support
5.Bonjour
6.Apple Application Support (iTunes 9 or later).
Restarted the PC and then downloaded the latest version of Microsoft's .NET Framework - version 4.
Restarted the PC again and received a strange message from some Apple application I have never heard of stating "CoreFoundation.dll file is missing".
I GOOGLEd the message and found out I also needed to unistall another Apple application called MobileMe. So, I did this and restarted the PC again!
I then downloaded the latest version of iTunes, again.
Now I'm getting "The iTunes application could not be opened. An unknown error occurred (-50).
From checking through GOOGLE, I believe it's something to do with user accounts and iTunes not being able to find the music folder???? But the answers I found all relate to Windows 64 pit PC's.
I am running Windows 7, 32 bit on a Sony Vaio laptop.
I cannot get support from Apple as I don't own a MAC. But I do own an iPhone but it's out of warranty.
HELP !!!!
Can anybody please help me?
Thx

If you go to the web page "http://support.apple.com/kb/ht1923" and follow the "Verify iTunes and related components are completely uninstalled" it does the trick. There are few other folders and files that alos need to be deleted!
iTunes is now working.

ITunes application could not be opened. An unknown error occurred (0x666D7

Been using iTunes 6 and 6.5 for months and months on my computer. Upgraded to 7.0. Installs just fine. No errors, no issues.
At the end, it asks if it can launch iTunes 7.0 and I click okay. I get this:
The iTunes application could not be opened. An unknown error occurred (0x666D743F).
Apple, HELP!!!! I can't use iTunes at all!!!! I'd be willing to reinstall 6 or 6.5 if I could find it somewhere.
Can someone please help?

This happened to me as well. I uninstalled iTunes 7 and tried again: nothing. I uninstalled iTunes 7 and Quicktime and tried again: nothing. I uninstalled everything and ran a third-party program called CCleaner to find registry entries that were not removed by the uninstallation and then reinstalled: nothing. Did all that and add a reboot after CCleaner before reinstalling: nothing. Downgraded back to iTunes 6.0.5 and it worked fine. Re-upgraded to iTunes 7, failure.
For those who may need it, you can download iTunes 6.0.5 from apple.com here: http://www.apple.com/support/downloads/itunes605forwindows.html

ITunes application could not be opened. An unknown error occurred (13014)

Ysterday I bought a brand spanking new Acer Aspire 7551 laptop with Windows 7 Home Premium and installed the latest version of iTunes (64 bit) on it.
I started iTunes with great anticipation because I so looked forward to syncing my iPhone with my Very Own Laptop.
Alas, iTunes did not start. Instead I received a message "the itunes application could not be opened. An unknown error occurred (13014)." Much Googling and reinstalling later the problem remains.
I have already deleted the genius files and rebooted several times. All to no avail. If anyone can propose a solution, I would be most grateful. Needless to say, I'd be happy to post any further info that can help to solve this problem.

Okay fixed my own problem. I don't know how or why, but it appears that I lost permissions for my iTunes folder in documents and settings. It took some messing with file permissions to get access to delete it, but I finally got it.
Once it was gone, no more issue. iTunes launched, created a new iTunes folder, and good as new.

HELP! The itunes application could not be opened. An Unknown error occurred (13014).

a day or so ago my macbook 13in crashed in the middle of use, took several minutes to then reboot and now seems to be working fine except itunes will not open. when i try to open it a dialog box appears with the following message: "The itunes application could not be opened. an unknown error occured (13014).
I am running snow leopard, and it first appeared it was disk space but i checked my HD and it says there is 372GB available so i cant imagine its that.
I am by no means any sort of genius on here, so any help is beyond appreciated!

Redownload iTunes. ----> http://www.apple.com/itunes/download/
That should solve the problem

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Error while deploying an application on weblogic 12c. An error occurred while reading the deployment descriptor. The error was: Error processing annotations

Anyone please help me solve this error. I am trying to deploy an application on weblogic 12c i am getting an error but the same application gets successfully deployed on weblogic 11g. The error is
An error occurred during activation of changes, please see the log for details.
Exception preparing module: EJBModule(gsCallbackAdapterLGTX-ejb.jar) An error occurred while reading the deployment descriptor. The error was: Error processing annotations: .
[EJB:015001]Unable to link class com.aep.gridsmart.adapters.lgtx.buslogic.deliver.xform.AdapterTransfomerDeliverSession in Jar /appl/oracle/middleware/WLS/12.1.1.0/user_projects/domains/Gridsmart/servers/ManagedServer1/tmp/_WL_user/gsCallbackAdapterLGTX/34vz4d/gsCallbackAdapterLGTX-ejb.jar : java.lang.NoClassDefFoundError: com/aep/gridsmart/adapter/deliver/CommonAdapterDeliverBean

Cotton please let me know what is the mistake i am
doingThe following path does not exist.
C:\Sun\AppServer7\domains\domain1\server1\
applications\j2ee-modules\task_1\WEB-INF\web.xml

Error occurred while installing the application: Invalid device specified

Error occurred while installing the application: Invalid <device> specified i am getting this error on windows. How to solve that.

Hi there.
I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
Really hope this helps.

Errors occuring on applications....???

Similar Messages

Maybe you are looking for