Errors occurred during the extraction(Generic Extraction)

Hi All,
I am facing problems in solving BW Production issues .
The following are the Problem  details.
Actually there are two Datasources connected to BW System  One is from R/3 and other is from CRM.
The problem is with Delta  Request which has been failed in ODS while uploading Data from R/3 in Background Scheduling but other DataSource is loading perfectly into BW System.
Its a generic extraction created based on View.
When i checked BW Side the error is displaying as follows:                                                                                Error occurred in the Data Selection.
     Error occurred in the Source System.
        No Data has been extracted from R/3 into BW.
But when i checked R/3 (Source system)
Firslty i executed RSA7  for checking Delta Records.  The records are 0 for the Datasource.
I executed RSA3 with Full UpdateMode, the number of records extracted were displayed
when i checked with Delta Update Mode its giving the following error.
Errors occurred during the extraction
Message no. RJ 012
Diagnosis
There was an error during the extraction phase of the extractor. An exception 'error_passed_to_mess_handler' has been triggered.
Procedure
Check the function module and the call from the extractor check program
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BW. The number of the records received in BW is checked against this information.
Regards,
Chakri
Message was edited by: Chakri
Message was edited by: Chakri

Hi,
If Idoc are already sent to BW then goto Monitor in BW and in Details tab note the Idoc no in OLTP, and goto R?3 and BD20 tcode and give the Idoc no and execute it.And see the records are came or not in BW.
Thanks
Reddy

Similar Messages

  • Errors occurred during the extraction - Generic datasource

    Hi,
    We had created a Generic datasource based on Infoset. While executing RSA3 for that datasource, 'Errors occurred during the extraction' message is getting displayed.
    In the Error log, it says, "Field catalog does not agree with the fields of the functional area".
    Please let us know on how to resolve this error asap.
    Thanks in advance!!!!

    hi haripriya,
    just go to RSO2.
    Enter the name of your datsource.
    then Click on Delete.
    Then Again Recreate your data source  with correct structure and definition.
    then activate it and replicate it in BW.
    hope this will help u.
    thanks

  • Errors occurred during the extraction, Message nos. RJ012

    Hi Gurus,
    I have created one generic data source using FM for CO-PA and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
    Errors occurred during the extraction
    Message no. RJ012
    Please help me to resolve this issue.
    Thanks & Regards,
    Saketh

    Hi Saketh,
    The cause of the error can be  some missing code that you didn't add to the function modul.
    You can check the document at the below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?overridelayout=t…
    Thanks&Regards,
    Oya.

  • Errors occurred during the extraction in RSA3

    Dear Masters,
    I have created one generic data source using FM and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
    Errors occurred during the extraction
    Message no. RJ012
    Please help me to resolve this issue.
    Thanks a lot in advance
    Raja S

    Hello Raja,
    I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
    I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
    All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
    Did you tried to debug your data source in RSA3 in debug mode??
    You will get the exact issue where it is failing.Check the option debug and execute in RSA3
    Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
    Thanks
    Ajeet

  • COPA datasource error - Errors occurred during the extraction

    Hi,
    I have an issue with the COPA datasource,
    1. I have created a COPA datasource in DEV and its working fine in DEV. the entire extraction is working fine.
    2. Then I transported this copa datasource to QA where I am getting belor error.
    In Extract checker, when checking for the data, i am getting the error
    "Errors occurred during the extraction"
    Application Log:
    @5C\QError@     Syntax error in generated program     @35\QLong text exists@
    Syntax error in generated program
    Message no. RD117
    Diagnosis
    A syntax error has occurred in the generated program for the CO-PA extractor:
    MSGV1: "RSFHGEN2"
    MSGV2: "No component exists with the name "HILFS". ."
    MSGV3: "                                                 18"
    MSGV4: ""
    Regards,
    Vijay

    Hi,
    Thanks for your answer, I have gone through this note and i know that there are inconsistencies b/w the extract structure and operating concern.
    But I would like to know is,
    1. why its working in DEV?
    2. How to fix this error in QA?
    3. Do I need to recreate the datasource and Operating concern with/without the fields which are giving the problem.
    Regards,
    Vijay

  • Errors occured during the Extraction.

    Hi Folks,
    I've transported Some of the HR data sources to the quality server,But when i check the data for 0HR_PT_2 DS in RSA3,I'm getting the message Errors occured during the Extraction.I checked for the details but nothing was there except Message No.RJ012.
    And the same thing was happening for 0JOB_ATTR. In the developement Server 0HR_PT_2 is fine showing 0 records,but the second had the same problem.

    Hi ,
    Look at following points
    1. ST22 dump
    2. Check whether underline table have any data or not
    3. Check the SP level whether it supports these DS
    4. cHECK WHether Errors occurred during the extraction, Message nos. RJ012 & R3009 debugging the datasource and see what is exact error.
    5. Extraction problem : RSA3 and in BW
    Thanks and regards
    Kiran

  • "Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO

    "Errors occurred during the extraction" when run RSA3 of EBP datasource 0DOC_NUMBER_ATTR.
    What would be the reason and how to resolve this problem?
    Thanks

    Hi Kevin,
    Generally the installed DS also comes under RSA5 nodes, not only in RSA6.
    Have you activated it earlier before extraction?
    If DS is already active, please try to follow all the steps once more, and check, and let us know if still the same error comes.
    Cheers!!!!!!!!!!!

  • COPA -Errors occured during the extraction

    dear experts,
    when extract copa data via rsa3, system shows 'Errors occured during the extraction'
    why?
    many thanks.
    brgds/steve

    please notify ur basis people abt the issue.
    bhaskar

  • Errors occurred during the extraction -  CRM Data Source

    Hello Experts
    I am working on CRM Datasource 0CRM_SRV_PROCESS_H, when I tried to run the infopackage for Init I am getting short durmp, for   "MESSAGE_TYPE_X" "      "SAPLRSATREE" or "LRSATREEF28"   "RSATREE_START_ACTIVATION" and says Source Sytem Error in the Log.  To cross verify I tried RSA3 Extract checker, I found error "Errors occurred during the extraction. This is happening in Production System, whereas same is working in Dev perfectly.
    Basically, I am using a BI intance within Solution Manager System.  Need your help urgently.
    Regards
    Aftab

    HI,
    Can you check the whether the source system connection is active by going RSA1>Source system Tab>Right click on the CRM source system-->Check if the connective is acyive?
    check whether already init has been done or what.If you have transported the infopackage also.please go into the infopackage cheduling screen in the scheduler tab check intialisation to the soirce system.whether there is any request.if it is there try to do delete the request  or if u cant under stand this in the info package scheduling screen  in the updae checkare you able to see delta option
    Let me know if it works.
    Cheers,
    Vikram

  • Errors occurred during the extraction URGENT

    Hi,
    When i check the extractor in RSA3 for an Account based COPA I am getting this error:
    Errors occurred during the extraction
    (We are implementing both Cost Based and Account Based PA from the same operating concern)
    What can I do to fix this error?
    Thanks

    so i think OSS note 1069507 come closest to my problem.
    In that note a prerequisite is " YOU HAVE APPLIED AN AGGREGATION TO THE EXTRACTION PROCESS"
    what does that mean and how do i do that?
    Edited by: SAPPER BI on May 6, 2008 2:56 AM

  • Errors occurred during the extraction

    Hi,
    I am getting an error  when i run rsa3 for particular DataSource  ZZBW_EKBE.  "Errors occurred during the extraction".
    Delta is not enabled for this DataSource .
    But when i trigger the InfoPackage  i can get the data.
    What will be cause of this error.
    Regards
    TMS

    Friends,
    Even i have a similar issue, when i check in RSA3 with update mode D, it shows 0 records but actually when i extract it with F mode there are new records....what i mean is I had 3000 records 2 days back but now i have 10000 records in F mode but which is not reflected in D mode!!!
    So in BI side my deltas are not picking any records...any clue...
    Thnaks in advance for any input....
    Venu.

  • Errors occurred during the extraction when run RSA3

    HI experts,
    when i run RSA3 am getting the information messgae like
    "Errors occurred during the extraction".
    i created a structure and function module .
    ie  extraction by a function module.
    and  how to resolve this problem?
    please help ....
    thnaks.
    upender.

    Try to execute the test extraction in debug mode.
    Regards

  • Errors occurred during the extraction in RSA3 - Extractor Checker

    Hello,
    I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
    Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
    Many thanks.
    Regards,
    Sri.

    HI  Sri,
    Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
    Try this ,
    Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request  --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
    R3TR   SMO4   0CRM_QUOTATION_I
    ( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
    This should resolve the issue
    Regards,
    Sathya

  • 0FI_GL_10 can't delta :Errors occurred during the extraction.

    hi,sdn!
    i have 3 DataSources,
    0FI_AA_11(FI-AA: Transactions),
    0FI_AA_12(FI-AA: Posted Depreciations) and 0FI_GL_10(General Ledger: Leading Ledger Balances).
    The initialize and full extraction is ok.
    when i delta it in rsa3,the system tell me:Errors occurred during the extraction.
    Is Append Structure result in this error?
    i want to know the reason,thanks!

    For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to InfoCubes, master data must already exist prior to extraction of transaction data. The following sequence must therefore be kept to during extraction:
    0FI_GL_4               
    General Ledger: line items (if required)
    0ASSET_ATTR_TEXT          
    Asset subnumber (flexible updating)
    0ASSET_AFAB                        
    Depreciation area real or derived
    then the transaction data
    0FI_AA_11             
    FIAA : transactions and / or
    0FI_AA_12             
    Posted depreciations (period values)

  • Activating 0FI_AP_50 - RSA3 "Errors occurred during the extraction" Message no. RJ012

    Hi-
    I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back.  I stated tracing backwards and looked at Extraction via RSA3 in source system.  At that time I received the error: "Errors occurred during the extraction" Message no. RJ012.  The data source is active and data is available in the corresponding tables.
    Any suggestions?
    Thanks,
    Mark

    Hi Mark,
    Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
    Goto Tcode SFW5:
    Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
    Then you might have to relogin again.
    One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
    As far as I know these business functions are not possible to revert back
    Thanks
    Amit

Maybe you are looking for

  • Formula variables & Exits in Report painter

    I have to create a report with YTD values where I have to check - If company code =1 then from period = 003 else from period = 001 Can I do by creating a formula variable for the Period ? If yes, then how? Thanks

  • My MacBook Pro fan runs while sleeping

    My MacBook Pro fan runs constantly, even while sleeping. The problem started about 2-3 months ago, but was pretty rare. When I noticed the problem, I would restart the computer and it would stop for 1-2 weeks. More recently it has become more constan

  • Why i can't download anything from the app store? (It turns  up "Error en el App Store. Vuelve a intentarlo más tarde. (null)"

    I am trying to download a game from the app store to my apple but it turns up "Error en el App Store. Vuelve a intentarlo más tarde. (null)". I am trying to download any other thing from the store and i can´t. I would like that somebody could tell me

  • Removal of Folders from Email

    My iPhone has a folder on it in an email account that I did not create. I see my Inbox, drafts, sent, Trash can, Spam folder, Trash Folder and a strange folder I did not create. I cannot delete it. Does anyone know how? Thanks!

  • IPhoto import does not preserve rotation

    Just installed the trial version, and imported my library from iPhoto. I used the option to keep the files in their original location. When I view the images in aperture, many of the images are incorrectly rotated. Note that they display correctly in