Errors occurred during the extraction, Message nos. RJ012 & R3009

Hi All,
I am trying to view the data for one of the custom generated Extractors - 3FI_GL_0L_TT using T-code RSA3. But when I try to execute to see the data, i get an error message "Errors occurred during the extraction, Message no. RJ012". I check the log, and in the log, the message is as below:
The extraction program does not support object 3FI_GL_0L_TT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 3FI_GL_0L_TT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I found many posts in SDN but none of them helped. Infact I found a note - 1069507, which provided a correction for exactly the same error but Basis informed me that the note is not applicable as it is given for only "bank-alyze" component & we don't have this component in our systems.
Did anyone have the same issue with the custom generated datasource in FI-GL for Totals table? Please advice.
Thanks

Hi,
I got the same error and we have cross client environment but in both environments i got the same error. So tcode SCC1 will not solve my problem and i have to take another way to solve it.
Debugging the datasource, i found out where the error came from: FM SMOX3_DSOURCE_DETAIL, consulting the table: smoxhead_s.
I will let u know if i get some news.
Regards

Similar Messages

Errors occurred during the extraction, Message nos. RJ012

Hi Gurus,
I have created one generic data source using FM for CO-PA and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
Errors occurred during the extraction
Message no. RJ012
Please help me to resolve this issue.
Thanks & Regards,
Saketh

Hi Saketh,
The cause of the error can be some missing code that you didn't add to the function modul.
You can check the document at the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?overridelayout=t…
Thanks&Regards,
Oya.

Activating 0FI_AP_50 - RSA3 "Errors occurred during the extraction" Message no. RJ012

Hi-
I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back. I stated tracing backwards and looked at Extraction via RSA3 in source system. At that time I received the error: "Errors occurred during the extraction" Message no. RJ012. The data source is active and data is available in the corresponding tables.
Any suggestions?
Thanks,
Mark

Hi Mark,
Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
Goto Tcode SFW5:
Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
Then you might have to relogin again.
One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
As far as I know these business functions are not possible to revert back
Thanks
Amit

Errors occurred during the extraction (Message no. RJ012)

Hi
I created the data source successfully based on Operating Concern (account based).
But in RSA3 the same data source not showing any data though the related COPA tables having the data.
What could be the problem?
As per the log, I searched in SAP there is some note saying need to apply the patch BANK_ANLAYZER
Regards
Venkat

I just had the same error. RJ012 in the BW system and RD155 in the source system.
I overcame this by creating summarization levels for CO-PA account-based.
see thread COPA Datasources
The error 'RD 155 System could not find a source of data that could perform
the search ' usually means that there is no suitable summarization level for
the CO-PA Account Based Datasource. There has to be one (single)
summarization level that contains all characteristics (except for the
controlling area) with '*' in the characteristics view in transaction KEDV
and has status 'active'.
Afterwards you have to fill this summarization level with transaction KEDU
also check thread COPA Summarization Concept
does that help?

Errors occured during the Extraction.

Hi Folks,
I've transported Some of the HR data sources to the quality server,But when i check the data for 0HR_PT_2 DS in RSA3,I'm getting the message Errors occured during the Extraction.I checked for the details but nothing was there except Message No.RJ012.
And the same thing was happening for 0JOB_ATTR. In the developement Server 0HR_PT_2 is fine showing 0 records,but the second had the same problem.

Hi ,
Look at following points
1. ST22 dump
2. Check whether underline table have any data or not
3. Check the SP level whether it supports these DS
4. cHECK WHether Errors occurred during the extraction, Message nos. RJ012 & R3009 debugging the datasource and see what is exact error.
5. Extraction problem : RSA3 and in BW
Thanks and regards
Kiran

"Errors occurred during the extraction" - COPA datasource using Tcode KEB0

Dear Experts,
I have created a COPA datasource using Transaction code KEB0 .In Operating Concern i gave company code value and i have chosen Account Based radio button and i have created a datasource name like "1_CO_PA_TEST"
i had given the datasource in RSA3.this datasource has a mandatory inputs of Controlling Area & Period/year .i had given the two inputs and tried executing the datasource.i got the error message "Errors occurred during the extraction" "Message no. RJ012"...
Can anyone solve my problem??????????
Thanks in Advance.
Regards,
SVB

Hi,
Can you check whether the Update mode in RSA3 is Full or Delta. If its delta, you would have to give the value of your BI system in Target system field. If you dont give this value, it would give the error that you received.

Errors occurred during the extraction in RSA3

Dear Masters,
I have created one generic data source using FM and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
Errors occurred during the extraction
Message no. RJ012
Please help me to resolve this issue.
Thanks a lot in advance
Raja S

Hello Raja,
I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
Did you tried to debug your data source in RSA3 in debug mode??
You will get the exact issue where it is failing.Check the option debug and execute in RSA3
Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
Thanks
Ajeet

Errors occurred during the extraction(Generic Extraction)

Hi All,
I am facing problems in solving BW Production issues .
The following are the Problem details.
Actually there are two Datasources connected to BW System One is from R/3 and other is from CRM.
The problem is with Delta Request which has been failed in ODS while uploading Data from R/3 in Background Scheduling but other DataSource is loading perfectly into BW System.
Its a generic extraction created based on View.
When i checked BW Side the error is displaying as follows:                                                                                Error occurred in the Data Selection.
     Error occurred in the Source System.
        No Data has been extracted from R/3 into BW.
But when i checked R/3 (Source system)
Firslty i executed RSA7 for checking Delta Records. The records are 0 for the Datasource.
I executed RSA3 with Full UpdateMode, the number of records extracted were displayed
when i checked with Delta Update Mode its giving the following error.
Errors occurred during the extraction
Message no. RJ 012
Diagnosis
There was an error during the extraction phase of the extractor. An exception 'error_passed_to_mess_handler' has been triggered.
Procedure
Check the function module and the call from the extractor check program
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BW. The number of the records received in BW is checked against this information.
Regards,
Chakri
Message was edited by: Chakri
Message was edited by: Chakri

Hi,
If Idoc are already sent to BW then goto Monitor in BW and in Details tab note the Idoc no in OLTP, and goto R?3 and BD20 tcode and give the Idoc no and execute it.And see the records are came or not in BW.
Thanks
Reddy

Errors occurred during the extraction - Generic datasource

Hi,
We had created a Generic datasource based on Infoset. While executing RSA3 for that datasource, 'Errors occurred during the extraction' message is getting displayed.
In the Error log, it says, "Field catalog does not agree with the fields of the functional area".
Please let us know on how to resolve this error asap.
Thanks in advance!!!!

hi haripriya,
just go to RSO2.
Enter the name of your datsource.
then Click on Delete.
Then Again Recreate your data source with correct structure and definition.
then activate it and replicate it in BW.
hope this will help u.
thanks

Errors occurred during the extraction - in Confirmations

Hi All,
When I do the extracton for delta in RSA3 for extractor 0BBP_TD_CONF_1, an error occured saying "Errors occurred during the extraction". when I go into details it didnot give much info except Message no. RJ012.
I couldn't find any note on this specific to SRM source system.
Anyone please let me know if you have faced the same issue or any solution. Thanks all.
S

Hello Raja,
I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
Did you tried to debug your data source in RSA3 in debug mode??
You will get the exact issue where it is failing.Check the option debug and execute in RSA3
Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
Thanks
Ajeet

COPA datasource error - Errors occurred during the extraction

Hi,
I have an issue with the COPA datasource,
1. I have created a COPA datasource in DEV and its working fine in DEV. the entire extraction is working fine.
2. Then I transported this copa datasource to QA where I am getting belor error.
In Extract checker, when checking for the data, i am getting the error
"Errors occurred during the extraction"
Application Log:
@5C\QError@ Syntax error in generated program @35\QLong text exists@
Syntax error in generated program
Message no. RD117
Diagnosis
A syntax error has occurred in the generated program for the CO-PA extractor:
MSGV1: "RSFHGEN2"
MSGV2: "No component exists with the name "HILFS". ."
MSGV3: " 18"
MSGV4: ""
Regards,
Vijay

Hi,
Thanks for your answer, I have gone through this note and i know that there are inconsistencies b/w the extract structure and operating concern.
But I would like to know is,
1. why its working in DEV?
2. How to fix this error in QA?
3. Do I need to recreate the datasource and Operating concern with/without the fields which are giving the problem.
Regards,
Vijay

0CFM_INIT_POSITIONS: Errors occurred during the extraction

Hi,
I am working in treasury management. I have activated the data source 0CFM_INIT_POSITIONS in rsa5 and while loading data I am getting error: Errors in source system
If I checked same data source in rsa3 in ECC, I got the following error
Errors occurred during the extraction.
could any one solve this problem?

sry, forgot to mention the error that i am getting for this init request in infocube mange->monitor
Delta upload is only possible after successful initialization
Message no. RSBM103
Diagnosis
You tried to extract records using a delta request in the target BI. However, it is not possible to transfer a consistent delta for this DataSource.
System Response
One of the following takes place:
1. You have not yet triggered the delta update with an init request.
2. The delta update was initialized but a request was deleted that was already transferred into the target BI.
3. The delta update was initialized but a request was deleted that was not yet transferred into the target BI.
In each case the consistency of the data transferred into the target BI is not guaranteed.
Procedure
Restructure the delta update by deleting the delta request that already exists in the target BI and then submitting an init request to InfoCube 0CFM_O01 of the source BI.

Errors occurred during the extraction for CFM data sources in RSA3

Hi Friends,
               When i try to execute the datasource's in Extractor Checker (RSA3) using the datasources given below:
0CFM_DELTA_POSITIONS
0CFM_INIT_POSITIONS
         I'm getting the error message saying that "Errors occurred during the extraction"
          This is my frist error and the the second error what i'm having is:
When i try to execute the the datasources given below:
0CFM_RDB_AN_1
0CFM_RDB_AN_2
0CFM_RDB_AN_3
0CFM_RDB_AN_4
0CFM_RDB_AN_5
0CFM_RDB_AN_6
         It is asking "Portfolio Hierarchy" in RSA3 selections, even though i've activated portfolio hierarchy, i can't able to get that hierarchy in Extractor Checker Selections (RSA3), unless i get that hierarchy, i can't be able to excute any datasource in extractor checker.
Awaiting for your inputs with curiousity.
Thanx in advance,
BalajiReddy

Have a look at the following OSS Notes :
1029605
808387
995660
594272

Errors occurred during the extraction - 0FI_AR_30

Hi guys,
I have just activated some datasources 0FI_AR_30, 0FI_AR_20 and 0FI_AR_50 and when I tried to check the extractors in RSA3 am getting a (Errors occurred during the extraction). Any clues?
Thanks,
Recca

Hi Gaurav,
I have no any other error message other than this in an SAP message window. This of course is a full extraction to check if the datasource fields are pulling data from the tables. Also, can you please expanciate on the init that need to be done.......do you mean Infopackage need to be created before I can check an extractor or what do you mean by target system?. This is RSA3 in ECC and not RSA1 IN BI. Please explain.
Thanks,
Recca

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DOC_NUMBER_ATTR.
What would be the reason and how to resolve this problem?
Thanks

Hi Kevin,
Generally the installed DS also comes under RSA5 nodes, not only in RSA6.
Have you activated it earlier before extraction?
If DS is already active, please try to follow all the steps once more, and check, and let us know if still the same error comes.
Cheers!!!!!!!!!!!

Errors occurred during the extraction, Message nos. RJ012 & R3009

Similar Messages

Maybe you are looking for