"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DOC_NUMBER_ATTR.
What would be the reason and how to resolve this problem?
Thanks

Hi Kevin,
Generally the installed DS also comes under RSA5 nodes, not only in RSA6.
Have you activated it earlier before extraction?
If DS is already active, please try to follow all the steps once more, and check, and let us know if still the same error comes.
Cheers!!!!!!!!!!!

Similar Messages

Errors occurred during the extraction when run RSA3

HI experts,
when i run RSA3 am getting the information messgae like
"Errors occurred during the extraction".
i created a structure and function module .
ie extraction by a function module.
and how to resolve this problem?
please help ....
thnaks.
upender.

Try to execute the test extraction in debug mode.
Regards

Errors occurred during the extraction - in Confirmations

Hi All,
When I do the extracton for delta in RSA3 for extractor 0BBP_TD_CONF_1, an error occured saying "Errors occurred during the extraction". when I go into details it didnot give much info except Message no. RJ012.
I couldn't find any note on this specific to SRM source system.
Anyone please let me know if you have faced the same issue or any solution. Thanks all.
S

Hello Raja,
I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
Did you tried to debug your data source in RSA3 in debug mode??
You will get the exact issue where it is failing.Check the option debug and execute in RSA3
Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
Thanks
Ajeet

Activating 0FI_AP_50 - RSA3 "Errors occurred during the extraction" Message no. RJ012

Hi-
I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back. I stated tracing backwards and looked at Extraction via RSA3 in source system. At that time I received the error: "Errors occurred during the extraction" Message no. RJ012. The data source is active and data is available in the corresponding tables.
Any suggestions?
Thanks,
Mark

Hi Mark,
Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
Goto Tcode SFW5:
Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
Then you might have to relogin again.
One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
As far as I know these business functions are not possible to revert back
Thanks
Amit

Errors occurred during the extraction for CFM data sources in RSA3

Hi Friends,
               When i try to execute the datasource's in Extractor Checker (RSA3) using the datasources given below:
0CFM_DELTA_POSITIONS
0CFM_INIT_POSITIONS
         I'm getting the error message saying that "Errors occurred during the extraction"
          This is my frist error and the the second error what i'm having is:
When i try to execute the the datasources given below:
0CFM_RDB_AN_1
0CFM_RDB_AN_2
0CFM_RDB_AN_3
0CFM_RDB_AN_4
0CFM_RDB_AN_5
0CFM_RDB_AN_6
         It is asking "Portfolio Hierarchy" in RSA3 selections, even though i've activated portfolio hierarchy, i can't able to get that hierarchy in Extractor Checker Selections (RSA3), unless i get that hierarchy, i can't be able to excute any datasource in extractor checker.
Awaiting for your inputs with curiousity.
Thanx in advance,
BalajiReddy

Have a look at the following OSS Notes :
1029605
808387
995660
594272

Errors occurred during the extraction in RSA3

Dear Masters,
I have created one generic data source using FM and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
Errors occurred during the extraction
Message no. RJ012
Please help me to resolve this issue.
Thanks a lot in advance
Raja S

Hello Raja,
I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
Did you tried to debug your data source in RSA3 in debug mode??
You will get the exact issue where it is failing.Check the option debug and execute in RSA3
Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
Thanks
Ajeet

Errors occurred during the extraction in RSA3 - Extractor Checker

Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.

HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya

Errors occurred during the extraction - CRM Data Source

Hello Experts
I am working on CRM Datasource 0CRM_SRV_PROCESS_H, when I tried to run the infopackage for Init I am getting short durmp, for "MESSAGE_TYPE_X" " "SAPLRSATREE" or "LRSATREEF28" "RSATREE_START_ACTIVATION" and says Source Sytem Error in the Log. To cross verify I tried RSA3 Extract checker, I found error "Errors occurred during the extraction. This is happening in Production System, whereas same is working in Dev perfectly.
Basically, I am using a BI intance within Solution Manager System. Need your help urgently.
Regards
Aftab

HI,
Can you check the whether the source system connection is active by going RSA1>Source system Tab>Right click on the CRM source system-->Check if the connective is acyive?
check whether already init has been done or what.If you have transported the infopackage also.please go into the infopackage cheduling screen in the scheduler tab check intialisation to the soirce system.whether there is any request.if it is there try to do delete the request or if u cant under stand this in the info package scheduling screen in the updae checkare you able to see delta option
Let me know if it works.
Cheers,
Vikram

Errors occurred during the extraction

Hi,
I am getting an error when i run rsa3 for particular DataSource ZZBW_EKBE. "Errors occurred during the extraction".
Delta is not enabled for this DataSource .
But when i trigger the InfoPackage i can get the data.
What will be cause of this error.
Regards
TMS

Friends,
Even i have a similar issue, when i check in RSA3 with update mode D, it shows 0 records but actually when i extract it with F mode there are new records....what i mean is I had 3000 records 2 days back but now i have 10000 records in F mode but which is not reflected in D mode!!!
So in BI side my deltas are not picking any records...any clue...
Thnaks in advance for any input....
Venu.

Errors occured during the Extraction.

Hi Folks,
I've transported Some of the HR data sources to the quality server,But when i check the data for 0HR_PT_2 DS in RSA3,I'm getting the message Errors occured during the Extraction.I checked for the details but nothing was there except Message No.RJ012.
And the same thing was happening for 0JOB_ATTR. In the developement Server 0HR_PT_2 is fine showing 0 records,but the second had the same problem.

Hi ,
Look at following points
1. ST22 dump
2. Check whether underline table have any data or not
3. Check the SP level whether it supports these DS
4. cHECK WHether Errors occurred during the extraction, Message nos. RJ012 & R3009 debugging the datasource and see what is exact error.
5. Extraction problem : RSA3 and in BW
Thanks and regards
Kiran

Errors occurred during the extraction(Generic Extraction)

Hi All,
I am facing problems in solving BW Production issues .
The following are the Problem details.
Actually there are two Datasources connected to BW System One is from R/3 and other is from CRM.
The problem is with Delta Request which has been failed in ODS while uploading Data from R/3 in Background Scheduling but other DataSource is loading perfectly into BW System.
Its a generic extraction created based on View.
When i checked BW Side the error is displaying as follows:                                                                                Error occurred in the Data Selection.
     Error occurred in the Source System.
        No Data has been extracted from R/3 into BW.
But when i checked R/3 (Source system)
Firslty i executed RSA7 for checking Delta Records. The records are 0 for the Datasource.
I executed RSA3 with Full UpdateMode, the number of records extracted were displayed
when i checked with Delta Update Mode its giving the following error.
Errors occurred during the extraction
Message no. RJ 012
Diagnosis
There was an error during the extraction phase of the extractor. An exception 'error_passed_to_mess_handler' has been triggered.
Procedure
Check the function module and the call from the extractor check program
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BW. The number of the records received in BW is checked against this information.
Regards,
Chakri
Message was edited by: Chakri
Message was edited by: Chakri

Hi,
If Idoc are already sent to BW then goto Monitor in BW and in Details tab note the Idoc no in OLTP, and goto R?3 and BD20 tcode and give the Idoc no and execute it.And see the records are came or not in BW.
Thanks
Reddy

COPA -Errors occured during the extraction

dear experts,
when extract copa data via rsa3, system shows 'Errors occured during the extraction'
why?
many thanks.
brgds/steve

please notify ur basis people abt the issue.
bhaskar

Errors occurred during the extraction URGENT

Hi,
When i check the extractor in RSA3 for an Account based COPA I am getting this error:
Errors occurred during the extraction
(We are implementing both Cost Based and Account Based PA from the same operating concern)
What can I do to fix this error?
Thanks

so i think OSS note 1069507 come closest to my problem.
In that note a prerequisite is " YOU HAVE APPLIED AN AGGREGATION TO THE EXTRACTION PROCESS"
what does that mean and how do i do that?
Edited by: SAPPER BI on May 6, 2008 2:56 AM

0FI_GL_10 can't delta :Errors occurred during the extraction.

hi,sdn!
i have 3 DataSources,
0FI_AA_11(FI-AA: Transactions),
0FI_AA_12(FI-AA: Posted Depreciations) and 0FI_GL_10(General Ledger: Leading Ledger Balances).
The initialize and full extraction is ok.
when i delta it in rsa3,the system tell me:Errors occurred during the extraction.
Is Append Structure result in this error?
i want to know the reason,thanks!

For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to InfoCubes, master data must already exist prior to extraction of transaction data. The following sequence must therefore be kept to during extraction:
0FI_GL_4
General Ledger: line items (if required)
0ASSET_ATTR_TEXT
Asset subnumber (flexible updating)
0ASSET_AFAB
Depreciation area real or derived
then the transaction data
0FI_AA_11
FIAA : transactions and / or
0FI_AA_12
Posted depreciations (period values)

Errors occurred during the extraction, Message nos. RJ012 & R3009

Hi All,
I am trying to view the data for one of the custom generated Extractors - 3FI_GL_0L_TT using T-code RSA3. But when I try to execute to see the data, i get an error message "Errors occurred during the extraction, Message no. RJ012". I check the log, and in the log, the message is as below:
The extraction program does not support object 3FI_GL_0L_TT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 3FI_GL_0L_TT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I found many posts in SDN but none of them helped. Infact I found a note - 1069507, which provided a correction for exactly the same error but Basis informed me that the note is not applicable as it is given for only "bank-alyze" component & we don't have this component in our systems.
Did anyone have the same issue with the custom generated datasource in FI-GL for Totals table? Please advice.
Thanks

Hi,
I got the same error and we have cross client environment but in both environments i got the same error. So tcode SCC1 will not solve my problem and i have to take another way to solve it.
Debugging the datasource, i found out where the error came from: FM SMOX3_DSOURCE_DETAIL, consulting the table: smoxhead_s.
I will let u know if i get some news.
Regards

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO

Similar Messages

Maybe you are looking for