Errors on boot - failed command: READ DMA

I've started to get failed command: READ DMA errors on boot. What do they mean? Is there any way to fix them?
[ 114.232991] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.233001] ata1.00: BMDMA stat 0x25
[ 114.233006] ata1.00: failed command: READ DMA
[ 114.233017] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 114.233022] ata1.00: status: { DRDY ERR }
[ 114.233026] ata1.00: error: { UNC }
[ 114.290536] ata1.00: configured for UDMA/133
[ 114.290566] sd 0:0:0:0: [sda] Unhandled sense code
[ 114.290573] sd 0:0:0:0: [sda]
[ 114.290577] Result: hostbyte=0x00 driverbyte=0x08
[ 114.290584] sd 0:0:0:0: [sda]
[ 114.290588] Sense Key : 0x3 [current] [descriptor]
[ 114.290596] Descriptor sense data with sense descriptors (in hex):
[ 114.290601] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 114.290624] 02 a6 57 02
[ 114.290636] sd 0:0:0:0: [sda]
[ 114.290640] ASC=0x11 ASCQ=0x4
[ 114.290647] sd 0:0:0:0: [sda] CDB:
[ 114.290651] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 114.290671] end_request: I/O error, dev sda, sector 44455682
[ 114.290700] ata1: EH complete
[ 115.677517] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.677529] ata1.00: BMDMA stat 0x25
[ 115.677538] ata1.00: failed command: READ DMA
[ 115.677555] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 115.677565] ata1.00: status: { DRDY ERR }
[ 115.677570] ata1.00: error: { UNC }
[ 115.713838] ata1.00: configured for UDMA/133
[ 115.713870] sd 0:0:0:0: [sda] Unhandled sense code
[ 115.713877] sd 0:0:0:0: [sda]
[ 115.713882] Result: hostbyte=0x00 driverbyte=0x08
[ 115.713889] sd 0:0:0:0: [sda]
[ 115.713893] Sense Key : 0x3 [current] [descriptor]
[ 115.713901] Descriptor sense data with sense descriptors (in hex):
[ 115.713905] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 115.713929] 02 a6 57 02
[ 115.713940] sd 0:0:0:0: [sda]
[ 115.713945] ASC=0x11 ASCQ=0x4
[ 115.713951] sd 0:0:0:0: [sda] CDB:
[ 115.713956] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 115.713976] end_request: I/O error, dev sda, sector 44455682
[ 115.714006] ata1: EH complete
[ 117.055388] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.055400] ata1.00: BMDMA stat 0x25
[ 117.055409] ata1.00: failed command: READ DMA
[ 117.055427] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 117.055436] ata1.00: status: { DRDY ERR }
[ 117.055442] ata1.00: error: { UNC }
[ 117.090462] ata1.00: configured for UDMA/133
[ 117.090494] sd 0:0:0:0: [sda] Unhandled sense code
[ 117.090501] sd 0:0:0:0: [sda]
[ 117.090506] Result: hostbyte=0x00 driverbyte=0x08
[ 117.090512] sd 0:0:0:0: [sda]
[ 117.090516] Sense Key : 0x3 [current] [descriptor]
[ 117.090524] Descriptor sense data with sense descriptors (in hex):
[ 117.090529] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 117.090552] 02 a6 57 02
[ 117.090564] sd 0:0:0:0: [sda]
[ 117.090568] ASC=0x11 ASCQ=0x4
[ 117.090575] sd 0:0:0:0: [sda] CDB:
[ 117.090579] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 117.090599] end_request: I/O error, dev sda, sector 44455682
[ 117.090648] ata1: EH complete
[ 118.344345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.344356] ata1.00: BMDMA stat 0x25
[ 118.344365] ata1.00: failed command: READ DMA
[ 118.344382] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 118.344391] ata1.00: status: { DRDY ERR }
[ 118.344397] ata1.00: error: { UNC }
[ 118.427170] ata1.00: configured for UDMA/133
[ 118.427198] sd 0:0:0:0: [sda] Unhandled sense code
[ 118.427240] sd 0:0:0:0: [sda]
[ 118.427246] Result: hostbyte=0x00 driverbyte=0x08
[ 118.427252] sd 0:0:0:0: [sda]
[ 118.427257] Sense Key : 0x3 [current] [descriptor]
[ 118.427265] Descriptor sense data with sense descriptors (in hex):
[ 118.427269] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 118.427293] 02 a6 57 02
[ 118.427304] sd 0:0:0:0: [sda]
[ 118.427309] ASC=0x11 ASCQ=0x4
[ 118.427315] sd 0:0:0:0: [sda] CDB:
[ 118.427320] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 118.427340] end_request: I/O error, dev sda, sector 44455682
[ 118.430078] ata1: EH complete
[ 725.193320] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
Here's some info about the hard drive itself:
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HM040HI
Serial Number: S07WJ10Y711599
Firmware Revision: YA100-02
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78242976
LBA48 user addressable sectors: 78242976
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 38204 MBytes
device size with M = 1000*1000: 40060 MBytes (40 GB)
cache/buffer size = 8192 KBytes (type=DualPortCache)
Last edited by β ™ (2014-01-14 10:31:39)

Similar Messages

Error: [Error ORABPEL-10903]: failed to read wsdl

Can any one please explain this error, When ever I used to change the XSD file of the process I am getting this error. Dont know why?? Please suggest me
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Global Type declaration/definition of name '{http://xmlns.oracle.com/bpel/workflow/task}actionType' are duplicated at the following locations:
file:/F:/JDeveloper/jdev/mywork/TestApplications/UploadProcess/bpel/WorkflowTask.xsd [line#: 151]
file:/F:/JDeveloper/jdev/mywork/TestApplications/UploadProcess/bpel/TaskService.xsd [line#: 307]
There are at least two of them looking different:
file:/F:/JDeveloper/jdev/mywork/TestApplications/UploadProcess/bpel/WorkflowTask.xsd [difference starting at line#:151]
file:/F:/JDeveloper/jdev/mywork/TestApplications/UploadProcess/bpel/TaskService.xsd [difference starting at line#:307]
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
Thanks,
Rajesh

Rajesh,
Let's take an example. There are 2 BPEL process's, BPEL1 and BPEL2 in which bpel1 invokes the bpel2. Whenever a schema (ex: test.xsd) used in bpel1 is referred in bpel2, if you are making any change in the schema in bpel1 and try to deploy it, it gives the Error ORABPEL-10903....
Solution is
1. you need to copy the changed test.xsd in bpel1 to bpel2.
2. Deploy the bpel2
3. deploy bpel1
Hope this would help.
Thanks,
Sen.

Error Orabpel 10903 failed to read wsdl - please help me

Dear Experts,
I am struggling hard with these errors. Actually I am having 7 bpel process, one among that 7 integrates all the process. I have deployed and tested in my machine it is working perfectly fine. I just copy the entire set up to another machine with same server version as SOA 10.1.3.1 and JDeveloper 10.1.3.1. But I am receiving error. Also I have made all the required changes respective to new server. In the sense have change wsdl location respective to new server. But I am able to compile/deploy all the process except the integrated process. Even I am not able to compile the integrated process. Please suggest me. what else i have to change..?
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "http://eway-pc:8889/orabpel/default/RecommendProcess/RecommendProcess?wsdl". The reason is http://eway-PC:8889/orabpel/xmllib/ws-addressing.xsd.
Please verify the schemas defined in wsdl.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
Thanks,
Rajesh A

Hai Rajesh its not a bug. If you see the wsdl file used in your partner link. you can see this
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://localhost.com:8888/orabpel/xmllib/ws-addressing.xsd"/>
</schema>
so while you try to deploy in your system schema location will schemaLocation="http://localhost.com:8888/orabpel/xmllib/ws-addressing.xsd" will be available bu if you try to deploy in other system you cant deploy because it wont be available.
Fix
copy the file int your project and change the wsdl to
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="ws-addressing.xsd"/>
</schema>
Also refer the threads
could not deploy my project in unix environment
Re: Is there an equivalent of Properties File for BPEL??

[Error ORABPEL-10903]: failed to read wsdl

Hi,
I am trying to deploy the Order booking application in Oracle SOA suite (10.1.3.2.0), and while deploying the SOAOrderBooking BPEL application to the application server, i get this error. I am following the SOA demo guide to deploy this sample application step-by-step.
I can access the 2 URLS -
a) http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl
b) http://KOLDXP-SHASEN:8888/orabpel/xmllib/ws-addressing.xsd
in the browser.
Can anyone suggest me the solution to this ?? What am I missing? The ports are all default ones and I did a basic installation.
Thanks,
Shantonav
| Compiling bpel process SOAOrderBooking, revision 1.0
[bpelc] ORABPEL-01021
[bpelc]
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is http://KOLDXP-SHASEN:8888/orabpel/xmllib/ws-addressing.xsd.
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is http://KOLDXP-SHASEN:8888/orabpel/xmllib/ws-addressing.xsd.
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
BUILD FAILED
D:\soademo_101310_prod\SOADEMO\SOAOrderBooking\build.xml:72: Validation error

Make sure you have turned off your proxy setting in JDeveloper. Tools -> Preferences -> Web & Proxy settings
Are you sure that is the right version of SOA Suite?
cheers
James

PowerPivot 2012 Error: BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent'

Hi, I have setup PowerPivot 2012 for SharePoint, but when I access'PowerPivot Management Dashboard' in Central Admin I get error message 'An error has occured'
Below is the error in the ULS,
Background file fill operation caught exception: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b', schema 'dbo'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.CompleteAsyncExecuteReader()
at System.Data.SqlClient.SqlCommand.InternalEndExecuteReader(IAsyncResult asyncResult, String endMethod)
at System.Data.SqlClient.SqlCommand.EndExecuteReader(IAsyncResult asyncResult)
at Microsoft.SharePoint.CoordinatedStreamBuffer.AsyncSqlSession.EndExecuteReader(IAsyncResult ar)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundSqlFileFiller.OnReadComplete(IAsyncResult result)
BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b',
schema 'dbo'.
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundFileFiller.Fill()
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBuffer.WaitForIntervalFill(SPInterval i)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedMemoryStream.Read(Byte[] array, Int32 offset, Int32 count)
at Microsoft.SharePoint.SPFileStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Microsoft.Office.Excel.Server.CalculationServer.BaseWorkbookManager.CacheStream(CachedFile cachedFile, FileLoader loader)
Regards,
Ayaz
SharePoint Architect

Hey Ayaz,
I do had the same error message when I click on "PowerPivot Management Dashboard". After few research I resolved this issue.
You need to provide the dbReader and dbWriter permission to powerpivot app pool account at "SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b"
Have a great day :-)
Santosh sethi

Error 1500 Update failed adobe reader

Windows Vista SP 2, HP Pavilion m8
200n Home Premium adobe reader
adobe reader
When I was updating my Adobe Reader, I got an error message that said, "Error 1500 Update failed."

First thing I would try is to uninstall & reinstall Adobe Reader.
If you also get the error during the uninstall, use the Windows Installer Cleanup Utility to remove it.

Ipod sync error "copy disk failed..read or written to" after 7.3 upgrade

This happened immed. after 7.2 upgrade and it "magically" went away after about a week. Now, after 7.3 it is happening again. It will only sync up a few songs at a time, a podcast here an there, before giving the error message. Got rid of any potentially corrupt files, tried other usb ports, did a restore, did everything recommended for this error message. This is 5th gen video ipod on a g5. Why does this keep occurring after iTunes upgrades, and what to do about it?

i just got a 30gig and was trying to load it with
music and getting the same message. what finally
worked was unhooking a usb hub and just hooking only
the ipod and keyboard to the back of the pc. now i
have to figure out how to get the rest of my usb
equipment hooked back up so it won't interfer with
the ipod.
Try a powered USB hub...

Random I/O errors (hdd) and failing to boot, Windows not affected

I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
Partition layout:
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs System Reserved D8B40750B4073094
├─sda2 ntfs 00EA107FEA107360
└─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
sr0
All three are primary partitions. Using ext4 yields the exact same result.
The problem is easy to reproduce:
Install Windows 7 to first half of HDD and Arch on the second half
At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
Windows seems to work just fine
Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
[ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x9FB7C000 000040
[ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1668MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
[ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
[ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
[ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
[ 0.000000] On node 0 totalpages: 649053
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3337 pages used for memmap
[ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5234680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146853a - 0xc162ec80 (1817 kB)
.text : 0xc1000000 - 0xc146853a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.408 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140424
[ 0.009582] ACPI: All ACPI Tables successfully acquired
[ 0.015209] Security Framework initialized
[ 0.015217] Yama: becoming mindful.
[ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015491] Initializing cgroup subsys devices
[ 0.015498] Initializing cgroup subsys freezer
[ 0.015502] Initializing cgroup subsys net_cls
[ 0.015507] Initializing cgroup subsys blkio
[ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015531] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015536] mce: CPU supports 7 MCE banks
[ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016347] ftrace: allocating 19356 entries in 38 pages
[ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.162668] ... version: 0
[ 0.162670] ... bit width: 48
[ 0.162671] ... generic registers: 6
[ 0.162672] ... value mask: 0000ffffffffffff
[ 0.162674] ... max period: 00007fffffffffff
[ 0.162675] ... fixed-purpose events: 0
[ 0.162676] ... event mask: 000000000000003f
[ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
[ 0.186179] x86: Booting SMP configuration:
[ 0.186182] .... node #0, CPUs: #1
[ 0.218942] Initializing CPU#1
[ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
[ 0.226179] #2
[ 0.258736] Initializing CPU#2
[ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
[ 0.266180] #3
[ 0.276300] Initializing CPU#3
[ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.279379] x86: Booted up 1 node, 4 CPUs
[ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
[ 0.280484] devtmpfs: initialized
[ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[ 0.281973] pinctrl core: initialized pinctrl subsystem
[ 0.282053] RTC time: 22:28:26, date: 09/21/14
[ 0.282107] NET: Registered protocol family 16
[ 0.282225] cpuidle: using governor ladder
[ 0.282228] cpuidle: using governor menu
[ 0.282436] ACPI: bus type PCI registered
[ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.282558] PCI: Using MMCONFIG for extended config space
[ 0.282559] PCI: Using configuration type 1 for base access
[ 0.293370] ACPI: Added _OSI(Module Device)
[ 0.293374] ACPI: Added _OSI(Processor Device)
[ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323484] ACPI: Interpreter enabled
[ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.323519] ACPI: (supports S0 S3 S4 S5)
[ 0.323522] ACPI: Using IOAPIC for interrupt routing
[ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.335971] PCI host bridge to bus 0000:00
[ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.336266] pci 0000:00:01.0: supports D1 D2
[ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.336417] pci 0000:00:01.1: supports D1 D2
[ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
[ 0.340177] pci 0000:00:12.2: supports D1 D2
[ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[ 0.343004] pci 0000:00:13.2: supports D1 D2
[ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.344446] pci 0000:01:00.0: supports D1 D2
[ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
[ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.356487] pci 0000:03:00.0: supports D1 D2
[ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.363129] pci_bus 0000:00: on NUMA node 0
[ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367456] vgaarb: loaded
[ 0.367458] vgaarb: bridge control possible 0000:00:01.0
[ 0.367505] PCI: Using ACPI for IRQ routing
[ 0.369255] PCI: pci_cache_line_size set to 64 bytes
[ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
[ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
[ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
[ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.369516] NetLabel: Initializing
[ 0.369518] NetLabel: domain hash size = 128
[ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369532] NetLabel: unlabeled traffic allowed by default
[ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371730] Switched to clocksource hpet
[ 0.378213] pnp: PnP ACPI init
[ 0.378231] ACPI: bus type PNP registered
[ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.378841] system 00:04: [io 0x04d6] has been reserved
[ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.378846] system 00:04: [io 0x077a] has been reserved
[ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.378850] system 00:04: [io 0x0c14] has been reserved
[ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.378855] system 00:04: [io 0x0c6c] has been reserved
[ 0.378857] system 00:04: [io 0x0c6f] has been reserved
[ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382206] pnp: PnP ACPI: found 6 devices
[ 0.382211] ACPI: bus type PNP unregistered
[ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
[ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420484] NET: Registered protocol family 2
[ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420733] TCP: reno registered
[ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420798] NET: Registered protocol family 1
[ 0.420831] pci 0000:00:01.0: Boot video device
[ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.038759] PCI: CLS 64 bytes, default 64
[ 1.038818] Unpacking initramfs...
[ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
[ 1.112753] Simple Boot Flag at 0x44 set to 0x1
[ 1.113077] perf: AMD NB counters detected
[ 1.113122] LVT offset 0 assigned for vector 0x400
[ 1.113138] perf: AMD IBS detected (0x000000ff)
[ 1.113149] apm: BIOS not found.
[ 1.113200] Scanning for low memory corruption every 60 seconds
[ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.116388] zbud: loaded
[ 1.116669] VFS: Disk quotas dquot_6.5.2
[ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.116962] msgmni has been set to 1707
[ 1.117034] Key type big_key registered
[ 1.117325] bounce: pool size: 64 pages
[ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.117448] io scheduler noop registered
[ 1.117452] io scheduler deadline registered
[ 1.117524] io scheduler cfq registered (default)
[ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118114] GHES: HEST is not enabled!
[ 1.118129] isapnp: Scanning for PnP cards...
[ 1.513691] isapnp: No Plug & Play device found
[ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514746] rtc_cmos 00:01: RTC can wake from S4
[ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515246] TCP: cubic registered
[ 1.515386] NET: Registered protocol family 10
[ 1.515657] NET: Registered protocol family 17
[ 1.516096] Using IPI No-Shortcut mode
[ 1.516269] registered taskstats version 1
[ 1.516866] Magic number: 14:856:502
[ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
[ 1.517032] PM: Hibernation image not present or could not be loaded.
[ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.517350] Write protecting the kernel text: 4516k
[ 1.517388] Write protecting the kernel read-only data: 1332k
[ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.529660] systemd-udevd[57]: starting version 216
[ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
[ 1.568048] ACPI: bus type USB registered
[ 1.568103] usbcore: registered new interface driver usbfs
[ 1.568141] usbcore: registered new interface driver hub
[ 1.568537] SCSI subsystem initialized
[ 1.574578] usbcore: registered new device driver usb
[ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594746] ehci-pci: EHCI PCI platform driver
[ 1.594935] QUIRK: Enable AMD PLL fix
[ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.595002] ehci-pci 0000:00:12.2: debug port 1
[ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
[ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595830] ohci-pci: OHCI PCI platform driver
[ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.602284] libata version 3.00 loaded.
[ 1.602306] hub 1-0:1.0: USB hub found
[ 1.602325] hub 1-0:1.0: 5 ports detected
[ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.602912] ehci-pci 0000:00:13.2: debug port 1
[ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
[ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.612308] hub 2-0:1.0: USB hub found
[ 1.612317] hub 2-0:1.0: 5 ports detected
[ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.613374] hub 3-0:1.0: USB hub found
[ 1.613388] hub 3-0:1.0: 2 ports detected
[ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.616754] hub 4-0:1.0: USB hub found
[ 1.616768] hub 4-0:1.0: 2 ports detected
[ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.673072] hub 5-0:1.0: USB hub found
[ 1.673098] hub 5-0:1.0: 5 ports detected
[ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[ 1.729803] hub 6-0:1.0: USB hub found
[ 1.729831] hub 6-0:1.0: 5 ports detected
[ 1.730166] ahci 0000:00:11.0: version 3.0
[ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.731131] scsi0 : ahci
[ 1.731321] scsi1 : ahci
[ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
[ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
[ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[ 2.218438] ata2.00: configured for UDMA/133
[ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.318651] ata1.00: configured for UDMA/133
[ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.338885] sda: sda1 sda2 sda3
[ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 2.438989] ata1.00: irq_stat 0x40000008
[ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
[ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 2.439127] ata1.00: status: { DRDY ERR }
[ 2.439166] ata1.00: error: { ICRC ABRT }
[ 2.439207] ata1: hard resetting link
[ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586950] usbcore: registered new interface driver usbhid
[ 2.586953] usbhid: USB HID core driver
[ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
[ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
[ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
[ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
[ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.039928] ata1.00: configured for UDMA/133
[ 3.039955] ata1: EH complete
[ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
[ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
[ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
[ 3.089128] ata1.00: irq_stat 0x40000008
[ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
[ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.089265] ata1.00: status: { DRDY ERR }
[ 3.089304] ata1.00: error: { ICRC ABRT }
[ 3.089346] ata1: hard resetting link
[ 3.115583] Switched to clocksource tsc
[ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.694602] ata1.00: configured for UDMA/133
[ 3.694621] ata1: EH complete
[ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
[ 3.809168] ata1.00: irq_stat 0x40000008
[ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
[ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.809305] ata1.00: status: { DRDY ERR }
[ 3.809343] ata1.00: error: { ICRC ABRT }
[ 3.809385] ata1: hard resetting link
[ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.404835] ata1.00: configured for UDMA/133
[ 4.404858] ata1: EH complete
[ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
[ 4.453760] ata1.00: irq_stat 0x40000008
[ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
[ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
[ 4.453894] ata1.00: status: { DRDY ERR }
[ 4.453932] ata1.00: error: { UNC }
[ 4.637639] ata1.00: configured for UDMA/133
[ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
[ 4.637691] sd 0:0:0:0: [sda]
[ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
[ 4.637695] sd 0:0:0:0: [sda]
[ 4.637697] Sense Key : 0x3 [current] [descriptor]
[ 4.637700] Descriptor sense data with sense descriptors (in hex):
[ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.637710] 00 00 09 b8
[ 4.637714] sd 0:0:0:0: [sda]
[ 4.637716] ASC=0x11 ASCQ=0x4
[ 4.637718] sd 0:0:0:0: [sda] CDB:
[ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
[ 4.637727] end_request: I/O error, dev sda, sector 2488
[ 4.637786] Buffer I/O error on device sda1, logical block 55
[ 4.637826] Buffer I/O error on device sda1, logical block 56
[ 4.637866] Buffer I/O error on device sda1, logical block 57
[ 4.637905] Buffer I/O error on device sda1, logical block 58
[ 4.637945] Buffer I/O error on device sda1, logical block 59
[ 4.637984] Buffer I/O error on device sda1, logical block 60
[ 4.638024] Buffer I/O error on device sda1, logical block 61
[ 4.638063] Buffer I/O error on device sda1, logical block 62
[ 4.638105] Buffer I/O error on device sda1, logical block 63
[ 4.638188] ata1: EH complete
[ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
[ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
[ 4.879364] ata1.00: irq_stat 0x40000008
[ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
[ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 4.879502] ata1.00: status: { DRDY ERR }
[ 4.879540] ata1.00: error: { ICRC ABRT }
[ 4.879583] ata1: hard resetting link
[ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5.469816] ata1.00: configured for UDMA/133
[ 5.469845] ata1: EH complete
[ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 5.582859] ata1.00: irq_stat 0x40000008
[ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
[ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 5.582997] ata1.00: status: { DRDY ERR }
[ 5.583036] ata1.00: error: { ICRC ABRT }
[ 5.583078] ata1: hard resetting link
[ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.191135] ata1.00: configured for UDMA/133
[ 6.191166] ata1: EH complete
[ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
[ 6.256073] ata1.00: irq_stat 0x40000008
[ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
[ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.256212] ata1.00: status: { DRDY ERR }
[ 6.256250] ata1.00: error: { ICRC ABRT }
[ 6.256292] ata1: hard resetting link
[ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.845773] ata1.00: configured for UDMA/133
[ 6.845806] ata1: EH complete
[ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
[ 6.986223] ata1.00: irq_stat 0x40000008
[ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
[ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.986360] ata1.00: status: { DRDY ERR }
[ 6.986399] ata1.00: error: { ICRC ABRT }
[ 6.986440] ata1: hard resetting link
[ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.578097] ata1.00: configured for UDMA/133
[ 7.578124] ata1: EH complete
[ 7.587216] random: nonblocking pool is initialized
[ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
[ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 7.602850] ata1.00: irq_stat 0x40000008
[ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
[ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 7.602982] ata1.00: status: { DRDY ERR }
[ 7.603020] ata1.00: error: { ICRC ABRT }
[ 7.603061] ata1: hard resetting link
[ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.188490] ata1.00: configured for UDMA/133
[ 8.188517] ata1: EH complete
[ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[ 8.216361] ata1.00: irq_stat 0x40000008
[ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
[ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.216500] ata1.00: status: { DRDY ERR }
[ 8.216539] ata1.00: error: { ICRC ABRT }
[ 8.216581] ata1: hard resetting link
[ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.809726] ata1.00: configured for UDMA/133
[ 8.809758] ata1: EH complete
[ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[ 8.836295] ata1.00: irq_stat 0x40000008
[ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
[ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.836429] ata1.00: status: { DRDY ERR }
[ 8.836467] ata1.00: error: { ICRC ABRT }
[ 8.836507] ata1: hard resetting link
[ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.430994] ata1.00: configured for UDMA/133
[ 9.431018] ata1: EH complete
[ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 9.837542] ata1.00: irq_stat 0x40000008
[ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
[ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 9.837680] ata1.00: status: { DRDY ERR }
[ 9.837719] ata1.00: error: { ICRC ABRT }
[ 9.837761] ata1: hard resetting link
[ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.515900] ata1.00: configured for UDMA/133
[ 10.515972] sd 0:0:0:0: [sda]
[ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
[ 10.515978] sd 0:0:0:0: [sda]
[ 10.515979] Sense Key : 0xb [current] [descriptor]
[ 10.515983] Descriptor sense data with sense descriptors (in hex):
[ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.515992] 5e 89 08 20
[ 10.515997] sd 0:0:0:0: [sda]
[ 10.515998] ASC=0x47 ASCQ=0x0
[ 10.516001] sd 0:0:0:0: [sda] CDB:
[ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
[ 10.516010] end_request: I/O error, dev sda, sector 1586038816
[ 10.516148] ata1: EH complete
[ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
[ 10.529786] ata1.00: irq_stat 0x40000008
[ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
[ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 10.529924] ata1.00: status: { DRDY ERR }
[ 10.529962] ata1.00: error: { ICRC ABRT }
[ 10.530004] ata1: hard resetting link
[ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.139673] ata1.00: configured for UDMA/100
[ 11.139723] sd 0:0:0:0: [sda]
[ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
[ 11.139728] sd 0:0:0:0: [sda]
[ 11.139730] Sense Key : 0xb [current] [descriptor]
[ 11.139733] Descriptor sense data with sense descriptors (in hex):
[ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.139743] 5e 89 08 d4
[ 11.139747] sd 0:0:0:0: [sda]
[ 11.139749] ASC=0x47 ASCQ=0x0
[ 11.139751] sd 0:0:0:0: [sda] CDB:
[ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
[ 11.139761] end_request: I/O error, dev sda, sector 1586038992
[ 11.139889] ata1: EH complete
[ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
[ 11.153169] ata1.00: irq_stat 0x40000008
[ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
[ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.153306] ata1.00: status: { DRDY ERR }
[ 11.153345] ata1.00: error: { ICRC ABRT }
[ 11.153386] ata1: hard resetting link
[ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.749884] ata1.00: configured for UDMA/100
[ 11.749918] sd 0:0:0:0: [sda]
[ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
[ 11.749923] sd 0:0:0:0: [sda]
[ 11.749925] Sense Key : 0xb [current] [descriptor]
[ 11.749928] Descriptor sense data with sense descriptors (in hex):
[ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.749938] 5e 89 08 28
[ 11.749942] sd 0:0:0:0: [sda]
[ 11.749944] ASC=0x47 ASCQ=0x0
[ 11.749946] sd 0:0:0:0: [sda] CDB:
[ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
[ 11.749956] end_request: I/O error, dev sda, sector 1586038824
[ 11.750093] ata1: EH complete
[ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 11.763206] ata1.00: irq_stat 0x40000008
[ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
[ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.763343] ata1.00: status: { DRDY ERR }
[ 11.763382] ata1.00: error: { ICRC ABRT }
[ 11.763424] ata1: hard resetting link
[ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.360321] ata1.00: configured for UDMA/100
[ 12.360370] sd 0:0:0:0: [sda]
[ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
[ 12.360375] sd 0:0:0:0: [sda]
[ 12.360377] Sense Key : 0xb [current] [descriptor]
[ 12.360380] Descriptor sense data with sense descriptors (in hex):
[ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.360390] 5e 89 08 c8
[ 12.360394] sd 0:0:0:0: [sda]
[ 12.360395] ASC=0x47 ASCQ=0x0
[ 12.360398] sd 0:0:0:0: [sda] CDB:
[ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
[ 12.360407] end_request: I/O error, dev sda, sector 1586038984
[ 12.360543] ata1: EH complete
[ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.370005] ata1.00: irq_stat 0x40000008
[ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
[ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.370143] ata1.00: status: { DRDY ERR }
[ 12.370182] ata1.00: error: { ICRC ABRT }
[ 12.370224] ata1: hard resetting link
[ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.959379] ata1.00: configured for UDMA/100
[ 12.959426] sd 0:0:0:0: [sda]
[ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
[ 12.959432] sd 0:0:0:0: [sda]
[ 12.959433] Sense Key : 0xb [current] [descriptor]
[ 12.959437] Descriptor sense data with sense descriptors (in hex):
[ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.959447] 63 89 08 3a
[ 12.959462] sd 0:0:0:0: [sda]
[ 12.959464] ASC=0x47 ASCQ=0x0
[ 12.959466] sd 0:0:0:0: [sda] CDB:
[ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
[ 12.959476] end_request: I/O error, dev sda, sector 1669924920
[ 12.959616] ata1: EH complete
[ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
[ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.973247] ata1.00: irq_stat 0x40000008
[ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
[ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.973384] ata1.00: status: { DRDY ERR }
[ 12.973423] ata1.00: error: { ICRC ABRT }
[ 12.973464] ata1: hard resetting link
[ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.569691] ata1.00: configured for UDMA/33
[ 13.569750] sd 0:0:0:0: [sda]
[ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
[ 13.569755] sd 0:0:0:0: [sda]
[ 13.569757] Sense Key : 0xb [current] [descriptor]
[ 13.569761] Descriptor sense data with sense descriptors (in hex):
[ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 13.569771] 5e 89 08 c0
[ 13.569775] sd 0:0:0:0: [sda]
[ 13.569777] ASC=0x47 ASCQ=0x0
[ 13.569779] sd 0:0:0:0: [sda] CDB:
[ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
[ 13.569789] end_request: I/O error, dev sda, sector 1586038976
[ 13.569933] ata1: EH complete
[ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
[ 13.583360] ata1.00: irq_stat 0x40000008
[ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
[ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 13.585478] ata1.00: status: { DRDY ERR }
[ 13.585516] ata1.00: error: { ICRC ABRT }
[ 13.585558] ata1: hard resetting link
[ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.180020] ata1.00: configured for UDMA/33
[ 14.180069] sd 0:0:0:0: [sda]
[ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
[ 14.180074] sd 0:0:0:0: [sda]
[ 14.180076] Sense Key : 0xb [current] [descriptor]
[ 14.180079] Descriptor sense data with sense descriptors (in hex):
[ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.180089] 63 89 08 30
[ 14.180094] sd 0:0:0:0: [sda]
[ 14.180095] ASC=0x47 ASCQ=0x0
[ 14.180098] sd 0:0:0:0: [sda] CDB:
[ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
[ 14.180108] end_request: I/O error, dev sda, sector 1669924912
[ 14.180245] ata1: EH complete
[ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
[ 14.190153] ata1.00: irq_stat 0x40000008
[ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
[ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.190290] ata1.00: status: { DRDY ERR }
[ 14.190328] ata1.00: error: { ICRC ABRT }
[ 14.190371] ata1: hard resetting link
[ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.779168] ata1.00: configured for UDMA/33
[ 14.779214] sd 0:0:0:0: [sda]
[ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
[ 14.779218] sd 0:0:0:0: [sda]
[ 14.779220] Sense Key : 0xb [current] [descriptor]
[ 14.779223] Descriptor sense data with sense descriptors (in hex):
[ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.779233] 63 89 08 80
[ 14.779237] sd 0:0:0:0: [sda]
[ 14.779239] ASC=0x47 ASCQ=0x0
[ 14.779241] sd 0:0:0:0: [sda] CDB:
[ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
[ 14.779251] end_request: I/O error, dev sda, sector 1669924976
[ 14.779391] ata1: EH complete
[ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
[ 14.793513] ata1.00: irq_stat 0x40000008
[ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
[ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.793651] ata1.00: status: { DRDY ERR }
[ 14.793690] ata1.00: error: { ICRC ABRT }
[ 14.793733] ata1: hard resetting link
[ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.378218] ata1.00: configured for UDMA/33
[ 15.378240] sd 0:0:0:0: [sda]
[ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
[ 15.378245] sd 0:0:0:0: [sda]
[ 15.378247] Sense Key : 0xb [current] [descriptor]
[ 15.378250] Descriptor sense data with sense descriptors (in hex):
[ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.378260] 63 89 08 28
[ 15.378264] sd 0:0:0:0: [sda]
[ 15.378266] ASC=0x47 ASCQ=0x0
[ 15.378268] sd 0:0:0:0: [sda] CDB:
[ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
[ 15.378277] end_request: I/O error, dev sda, sector 1669924904
[ 15.378427] ata1: EH complete
[ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
[ 15.390148] ata1.00: irq_stat 0x40000008
[ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
[ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.390285] ata1.00: status: { DRDY ERR }
[ 15.390324] ata1.00: error: { ICRC ABRT }
[ 15.390366] ata1: hard resetting link
[ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.977410] ata1.00: configured for UDMA/33
[ 15.977500] ata1: EH complete
[ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
[ 15.986916] ata1.00: irq_stat 0x40000008
[ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
[ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.987054] ata1.00: status: { DRDY ERR }
[ 15.987093] ata1.00: error: { ICRC ABRT }
[ 15.987135] ata1: hard resetting link
[ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.576437] ata1.00: configured for UDMA/33
[ 16.576509] sd 0:0:0:0: [sda]
[ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
[ 16.576514] sd 0:0:0:0: [sda]
[ 16.576516] Sense Key : 0xb [current] [descriptor]
[ 16.576519] Descriptor sense data with sense descriptors (in hex):
[ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.576529] 63 89 08 20
[ 16.576533] sd 0:0:0:0: [sda]
[ 16.576534] ASC=0x47 ASCQ=0x0
[ 16.576537] sd 0:0:0:0: [sda] CDB:
[ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
[ 16.576546] end_request: I/O error, dev sda, sector 1669924896
[ 16.576642] ata1: EH complete
[ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
[ 16.586847] ata1.00: irq_stat 0x40000008
[ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
[ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 16.586980] ata1.00: status: { DRDY ERR }
[ 16.587018] ata1.00: error: { ICRC ABRT }
[ 16.587058] ata1: hard resetting link
[ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.175907] ata1.00: configured for UDMA/33
[ 17.175963] sd 0:0:0:0: [sda]
[ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
[ 17.175968] sd 0:0:0:0: [sda]
[ 17.175970] Sense Key : 0xb [current] [descriptor]
[ 17.175973] Descriptor sense data with sense descriptors (in hex):
[ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 17.175983] 5e 89 08 54
[ 17.175987] sd

I have only Arch installed, 64 bit, UEFI boot.
The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
Sep 24 06:13:59 kernel: ata6: hard resetting link
Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:13:59 kernel: 00 00 0e 87
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
Sep 24 06:13:59 kernel: ata6: EH complete
Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6: hard resetting link
Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
and so on... It somehow booted, but now journalctl says:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
while the Error hasn't occured yet.
I think I wil take the emergency procedure, and start backing up my files and system ...
I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

Sql Server 2014 - Error message: Failed to read BLOB column

Hi all,
Am experiencing this error in Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Enterprise Edition (Build 7601: Service Pack 1).
Error messages:
Message: Failed to read BLOB column
Stack:    at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String
strWhereClause, Boolean useTableLockHint, Int32 bcpFileFormatVersion)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
   at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
   at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Please can you assist me on this issue.

The error message states a communication link failure has occurred.
This is most likely a network related error and usually is transient.
Try to generate the snapshot again and see if the error still occurs. If the error still occurs, you will need to have a network admin check the links.
Brandon Williams (blog |
linkedin)

Compilation error: Failed to read wsdl

Dear Experts,
I am getting issue during deployment of BPEL process. I have created a BPEL process with schema named TD_Init.xsd and I get deployed. Later I have changed my xsd content in the sense I have added some more elements on the same xsd and update my process. getting compilation error as
Error: [Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Global element declaration/definition of name '{http://www.example.org}ProcessRequestElement' are duplicated at the following locations:
file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [line#: 14]
http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [line#: 14]
http://eway:8889/orabpel/default/AdvanceIssue/TD_Init.xsd [line#: 14]
There are at least two of them looking different:
file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [difference starting at line#:23]
http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [difference starting at line#:23]
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).

Hi Rajesh,
Thanks. You are having this issue because you are referencing the same xsd at a time with more than one process. Ensure that you reference the schema with its logical reference and use it within you local project directly. Even, if that does not work, then make it global and so all processes can use it .
Example :
You need to copy all your schemas into <ORACLE_SOA_HOME>/bpel/system/xmllib folder and access them using the following URL:
http://<HOST NAME>:<PORT>/orabpel/xmllib/<XSD_PATH>
For Example:
http://localhost:7777/orabpel/xmllib/myxsd.xsd
Regards
A

Errors At Boot

I should preface this with I'm not a Linux noob, but I am no expert either (I get by). Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot. Never could quite see exactly what they were so today I logged dmesg to a text file. I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system. After the errors show the system continues to boot to Openbox. I was hope someone could tell me what the errors are and how to not get them anymore. I have posted the dmesg log below, thanks in advanced for any help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
[ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
[ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2700.249 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
[ 0.013342] pid_max: default: 32768 minimum: 301
[ 0.013386] Security Framework initialized
[ 0.013395] AppArmor: AppArmor disabled by boot time parameter
[ 0.013396] Yama: becoming mindful.
[ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017157] Mount-cache hash table entries: 256
[ 0.017396] Initializing cgroup subsys memory
[ 0.017414] Initializing cgroup subsys devices
[ 0.017417] Initializing cgroup subsys freezer
[ 0.017418] Initializing cgroup subsys net_cls
[ 0.017420] Initializing cgroup subsys blkio
[ 0.017442] tseg: 0000000000
[ 0.017449] CPU: Physical Processor ID: 0
[ 0.017450] CPU: Processor Core ID: 0
[ 0.017452] mce: CPU supports 5 MCE banks
[ 0.017458] LVT offset 0 assigned for vector 0xf9
[ 0.017462] process: using AMD E400 aware idle routine
[ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.018244] ACPI: Core revision 20130725
[ 0.021196] ACPI: All ACPI Tables successfully acquired
[ 0.023362] ftrace: allocating 20290 entries in 80 pages
[ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183403] Brought up 2 CPUs
[ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
[ 0.183927] devtmpfs: initialized
[ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
[ 0.188111] RTC time: 8:27:34, date: 12/02/13
[ 0.188111] NET: Registered protocol family 16
[ 0.188127] cpuidle: using governor ladder
[ 0.188128] cpuidle: using governor menu
[ 0.188133] node 0 link 0: io port [b000, ffff]
[ 0.188135] TOM: 00000000c0000000 aka 3072M
[ 0.188137] node 0 link 0: mmio [a0000, bffff]
[ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
[ 0.188145] TOM2: 0000000140000000 aka 5120M
[ 0.188148] bus: [bus 00-04] on node 0 link 0
[ 0.188149] bus: 00 [io 0x0000-0xffff]
[ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.188168] ACPI: bus type PCI registered
[ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199259] PCI: Using configuration type 1 for base access
[ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.199435] mtrr: corrected configuration.
[ 0.200005] bio: create slab <bio-0> at 0
[ 0.200048] ACPI: Added _OSI(Module Device)
[ 0.200050] ACPI: Added _OSI(Processor Device)
[ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200693] ACPI: EC: Look up EC in DSDT
[ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204741] ACPI: Interpreter enabled
[ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
[ 0.204770] ACPI: (supports S0 S1 S4 S5)
[ 0.204771] ACPI: Using IOAPIC for interrupt routing
[ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204933] ACPI: No dock devices found.
[ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
[ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.218058] PCI host bridge to bus 0000:00
[ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
[ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
[ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.219665] pci 0000:00:13.5: supports D1 D2
[ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
[ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
[ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226865] pci 0000:02:00.0: supports D1 D2
[ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
[ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
[ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
[ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235177] Found 1 acpi root devices
[ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235262] vgaarb: loaded
[ 0.235262] vgaarb: bridge control possible 0000:01:00.0
[ 0.235262] PCI: Using ACPI for IRQ routing
[ 0.244778] PCI: pci_cache_line_size set to 64 bytes
[ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
[ 0.244956] NetLabel: Initializing
[ 0.244957] NetLabel: domain hash size = 128
[ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244971] NetLabel: unlabeled traffic allowed by default
[ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.246697] Switched to clocksource hpet
[ 0.251917] pnp: PnP ACPI init
[ 0.251938] ACPI: bus type PNP registered
[ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.252201] system 00:00: [io 0x040b] has been reserved
[ 0.252204] system 00:00: [io 0x04d6] has been reserved
[ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.252209] system 00:00: [io 0x0c14] has been reserved
[ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.252216] system 00:00: [io 0x0c6f] has been reserved
[ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252336] pnp 00:01: [dma 4]
[ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
[ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252767] pnp 00:07: [dma 2]
[ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253938] pnp: PnP ACPI: found 13 devices
[ 0.253939] ACPI: bus type PNP unregistered
[ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261266] NET: Registered protocol family 2
[ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.262046] TCP: reno registered
[ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262209] NET: Registered protocol family 1
[ 0.616902] pci 0000:01:00.0: Boot video device
[ 0.616913] PCI: CLS 32 bytes, default 64
[ 0.616966] Unpacking initramfs...
[ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
[ 0.677630] PCI-DMA: Disabling AGP.
[ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.677712] PCI-DMA: using GART IOMMU.
[ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.682349] Scanning for low memory corruption every 60 seconds
[ 0.682695] audit: initializing netlink socket (disabled)
[ 0.682709] type=2000 audit(1385972853.679:1): initialized
[ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695128] zbud: loaded
[ 0.695281] VFS: Disk quotas dquot_6.5.2
[ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.695554] msgmni has been set to 7910
[ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.695993] io scheduler noop registered
[ 0.695995] io scheduler deadline registered
[ 0.696025] io scheduler cfq registered (default)
[ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.696445] vesafb: scrolling: redraw
[ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
[ 0.702849] Console: switching to colour frame buffer device 80x30
[ 0.709096] fb0: VESA VGA frame buffer device
[ 0.709135] GHES: HEST is not enabled!
[ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.750958] Linux agpgart interface v0.103
[ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751860] mousedev: PS/2 mouse device common for all mice
[ 0.751927] rtc_cmos 00:03: RTC can wake from S4
[ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.752187] drop_monitor: Initializing network drop monitor service
[ 0.752254] TCP: cubic registered
[ 0.752361] NET: Registered protocol family 10
[ 0.752553] NET: Registered protocol family 17
[ 0.752565] Key type dns_resolver registered
[ 0.752847] registered taskstats version 1
[ 0.753423] Magic number: 9:957:471
[ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
[ 0.753559] PM: Hibernation image not present or could not be loaded.
[ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.755072] Write protecting the kernel read-only data: 8192k
[ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.769771] systemd-udevd[47]: starting version 208
[ 0.794492] Floppy drive(s): fd0 is 1.44M
[ 0.803163] ACPI: bus type USB registered
[ 0.803196] usbcore: registered new interface driver usbfs
[ 0.803207] usbcore: registered new interface driver hub
[ 0.804032] usbcore: registered new device driver usb
[ 0.804145] SCSI subsystem initialized
[ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.805956] ohci-pci: OHCI PCI platform driver
[ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.808453] ehci-pci: EHCI PCI platform driver
[ 0.810692] FDC 0 is a post-1991 82077
[ 0.810859] libata version 3.00 loaded.
[ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.812133] scsi0 : pata_jmicron
[ 0.812212] scsi1 : pata_jmicron
[ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.860877] hub 1-0:1.0: USB hub found
[ 0.860890] hub 1-0:1.0: 2 ports detected
[ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.917507] hub 2-0:1.0: USB hub found
[ 0.917518] hub 2-0:1.0: 2 ports detected
[ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 0.974160] hub 3-0:1.0: USB hub found
[ 0.974171] hub 3-0:1.0: 2 ports detected
[ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.030833] hub 4-0:1.0: USB hub found
[ 1.030843] hub 4-0:1.0: 2 ports detected
[ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.087499] hub 5-0:1.0: USB hub found
[ 1.087509] hub 5-0:1.0: 2 ports detected
[ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 1.643840] usb 1-1: USB disconnect, device number 2
[ 1.644033] usb 1-2: USB disconnect, device number 3
[ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.760313] ehci-pci 0000:00:13.5: debug port 1
[ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.770182] hub 6-0:1.0: USB hub found
[ 1.770191] hub 6-0:1.0: 10 ports detected
[ 1.826731] hub 1-0:1.0: USB hub found
[ 1.826742] hub 1-0:1.0: 2 ports detected
[ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.828580] usbcore: registered new interface driver usbhid
[ 1.828583] usbhid: USB HID core driver
[ 1.883417] hub 2-0:1.0: USB hub found
[ 1.883431] hub 2-0:1.0: 2 ports detected
[ 1.940057] hub 3-0:1.0: USB hub found
[ 1.940067] hub 3-0:1.0: 2 ports detected
[ 1.996722] hub 4-0:1.0: USB hub found
[ 1.996732] hub 4-0:1.0: 2 ports detected
[ 2.053388] hub 5-0:1.0: USB hub found
[ 2.053398] hub 5-0:1.0: 2 ports detected
[ 2.053683] ahci 0000:00:12.0: version 3.0
[ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 2.054699] scsi2 : ahci
[ 2.054775] scsi3 : ahci
[ 2.054850] scsi4 : ahci
[ 2.054920] scsi5 : ahci
[ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.056192] scsi6 : pata_atiixp
[ 2.056251] scsi7 : pata_atiixp
[ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.067129] scsi8 : ahci
[ 2.067200] scsi9 : ahci
[ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
[ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
[ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
[ 2.227109] ata7.00: configured for UDMA/33
[ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.540027] ata3: softreset failed (device not ready)
[ 2.540185] ata3: applying PMP SRST workaround and retrying
[ 2.540217] ata5: softreset failed (device not ready)
[ 2.540381] ata5: applying PMP SRST workaround and retrying
[ 2.540408] ata4: softreset failed (device not ready)
[ 2.540563] ata4: applying PMP SRST workaround and retrying
[ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708445] ata3.00: configured for UDMA/133
[ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.709436] ata4.00: configured for UDMA/133
[ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.716937] sdb: sdb1
[ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.719683] ata5.00: configured for UDMA/133
[ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
[ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
[ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
[ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 2.728116] ata5.00: status: { DRDY }
[ 2.728231] ata5: hard resetting link
[ 2.736521] sda: sda1 sda2 < sda5 >
[ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
[ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
[ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
[ 3.213356] ata5: softreset failed (device not ready)
[ 3.213519] ata5: applying PMP SRST workaround and retrying
[ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 3.392798] ata5.00: revalidation failed (errno=-5)
[ 8.380028] ata5: hard resetting link
[ 8.866697] ata5: softreset failed (device not ready)
[ 8.866861] ata5: applying PMP SRST workaround and retrying
[ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046260] ata5.00: configured for UDMA/133
[ 9.046276] ata5: EH complete
[ 9.052053] sdc: sdc1
[ 9.052397] sdc: detected capacity change from 0 to 1000204886016
[ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
[ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
[ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 9.103442] ata5.00: status: { DRDY }
[ 9.103556] ata5: hard resetting link
[ 9.590022] ata5: softreset failed (device not ready)
[ 9.590182] ata5: applying PMP SRST workaround and retrying
[ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 9.769458] ata5.00: revalidation failed (errno=-5)
[ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.756687] ata5: hard resetting link
[ 15.243350] ata5: softreset failed (device not ready)
[ 15.247493] ata5: applying PMP SRST workaround and retrying
[ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426255] ata5.00: configured for UDMA/133
[ 15.426271] ata5: EH complete
[ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
[ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
[ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 15.497016] ata5.00: status: { DRDY }
[ 15.501349] ata5: hard resetting link
[ 15.986684] ata5: softreset failed (device not ready)
[ 15.990999] ata5: applying PMP SRST workaround and retrying
[ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169560] ata5.00: configured for UDMA/133
[ 16.169567] ata5: EH complete
[ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
[ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
[ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
[ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
[ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.270799] ata5.00: status: { DRDY }
[ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
[ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.297504] ata5.00: status: { DRDY }
[ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
[ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.324306] ata5.00: status: { DRDY }
[ 16.328707] ata5: hard resetting link
[ 16.813352] ata5: softreset failed (device not ready)
[ 16.817758] ata5: applying PMP SRST workaround and retrying
[ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996263] ata5.00: configured for UDMA/133
[ 16.996279] ata5: EH complete
[ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
[ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 18.110443] systemd[1]: Starting Remote File Systems.
[ 18.110456] systemd[1]: Reached target Remote File Systems.
[ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
[ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
[ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
[ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.110638] systemd[1]: Starting Encrypted Volumes.
[ 18.110651] systemd[1]: Reached target Encrypted Volumes.
[ 18.110664] systemd[1]: Starting Journal Socket.
[ 18.110711] systemd[1]: Listening on Journal Socket.
[ 18.110728] systemd[1]: Starting Setup Virtual Console...
[ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.139007] systemd[1]: Mounting Huge Pages File System...
[ 18.139550] systemd[1]: Starting Journal Service...
[ 18.140217] systemd[1]: Started Journal Service.
[ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
[ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 18.806623] systemd-udevd[155]: starting version 208
[ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 19.331559] ACPI: Power Button [PWRB]
[ 19.331882] ACPI: Fan [FAN] (on)
[ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
[ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.337764] ACPI: Power Button [PWRF]
[ 19.337878] ACPI: Invalid passive threshold
[ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
[ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388553] wmi: Mapper loaded
[ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
[ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
[ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.717185] MCE: In-kernel MCE decoding enabled.
[ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.780737] [drm] Initialized drm 1.1.0 20060810
[ 19.801750] EDAC MC: Ver: 3.0.0
[ 19.808239] sky2: driver version 1.30
[ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
[ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
[ 19.870517] AMD64 EDAC driver v3.4.0
[ 19.895226] microcode: AMD CPU family 0xf not supported
[ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
[ 20.021077] kvm: Nested Virtualization enabled
[ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
[ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 20.100569] Console: switching to colour dummy device 80x25
[ 20.101154] [drm] hdmi device not found 1 0 1
[ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
[ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.158048] sp5100_tco: PCI Revision ID: 0x13
[ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
[ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
[ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
[ 20.204615] [TTM] Initializing pool allocator
[ 20.204619] [TTM] Initializing DMA pool allocator
[ 20.204630] nouveau [ DRM] VRAM: 512 MiB
[ 20.204632] nouveau [ DRM] GART: 1048576 MiB
[ 20.204636] nouveau [ DRM] TMDS table version 2.0
[ 20.204638] nouveau [ DRM] DCB version 4.0
[ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
[ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
[ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
[ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 20.204652] nouveau [ DRM] DCB conn 00: 2030
[ 20.204655] nouveau [ DRM] DCB conn 01: 1130
[ 20.204657] nouveau [ DRM] DCB conn 02: 0210
[ 20.204659] nouveau [ DRM] DCB conn 03: 0211
[ 20.204660] nouveau [ DRM] DCB conn 04: 0213
[ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
[ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.210897] [drm] No driver support for vblank timestamp query.
[ 20.211027] nouveau [ DRM] 1 available performance level(s)
[ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
[ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
[ 20.214375] ppdev: user-space parallel port driver
[ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
[ 20.288622] EDAC amd64: DRAM ECC disabled.
[ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 20.288675] fbcon: nouveaufb (fb0) is primary device
[ 20.376049] Console: switching to colour frame buffer device 128x48
[ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.376340] nouveau 0000:01:00.0: registered panic notifier
[ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
[ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
[ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 102.400046] ata4.00: status: { DRDY }
[ 102.400051] ata4: hard resetting link
[ 102.933349] ata4: softreset failed (device not ready)
[ 102.933356] ata4: applying PMP SRST workaround and retrying
[ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102326] ata4.00: configured for UDMA/133
[ 103.102330] ata4.00: device reported invalid CHS sector 0
[ 103.102340] sd 3:0:0:0: [sdb]
[ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
[ 103.102344] sd 3:0:0:0: [sdb]
[ 103.102345] Sense Key : 0xb [current] [descriptor]
[ 103.102348] Descriptor sense data with sense descriptors (in hex):
[ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.102355] 00 00 00 00
[ 103.102358] sd 3:0:0:0: [sdb]
[ 103.102359] ASC=0x0 ASCQ=0x0
[ 103.102361] sd 3:0:0:0: [sdb] CDB:
[ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
[ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
[ 103.102415] ata4: EH complete
[ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
[ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
[ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386714] ata4.00: status: { DRDY }
[ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386723] ata4.00: status: { DRDY }
[ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386731] ata4.00: status: { DRDY }
[ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386740] ata4.00: status: { DRDY }
[ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386748] ata4.00: status: { DRDY }
[ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386757] ata4.00: status: { DRDY }
[ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:

I should preface this with I'm not a Linux noob, but I am no expert either (I get by). Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot. Never could quite see exactly what they were so today I logged dmesg to a text file. I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system. After the errors show the system continues to boot to Openbox. I was hope someone could tell me what the errors are and how to not get them anymore. I have posted the dmesg log below, thanks in advanced for any help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
[ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
[ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2700.249 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
[ 0.013342] pid_max: default: 32768 minimum: 301
[ 0.013386] Security Framework initialized
[ 0.013395] AppArmor: AppArmor disabled by boot time parameter
[ 0.013396] Yama: becoming mindful.
[ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017157] Mount-cache hash table entries: 256
[ 0.017396] Initializing cgroup subsys memory
[ 0.017414] Initializing cgroup subsys devices
[ 0.017417] Initializing cgroup subsys freezer
[ 0.017418] Initializing cgroup subsys net_cls
[ 0.017420] Initializing cgroup subsys blkio
[ 0.017442] tseg: 0000000000
[ 0.017449] CPU: Physical Processor ID: 0
[ 0.017450] CPU: Processor Core ID: 0
[ 0.017452] mce: CPU supports 5 MCE banks
[ 0.017458] LVT offset 0 assigned for vector 0xf9
[ 0.017462] process: using AMD E400 aware idle routine
[ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.018244] ACPI: Core revision 20130725
[ 0.021196] ACPI: All ACPI Tables successfully acquired
[ 0.023362] ftrace: allocating 20290 entries in 80 pages
[ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183403] Brought up 2 CPUs
[ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
[ 0.183927] devtmpfs: initialized
[ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
[ 0.188111] RTC time: 8:27:34, date: 12/02/13
[ 0.188111] NET: Registered protocol family 16
[ 0.188127] cpuidle: using governor ladder
[ 0.188128] cpuidle: using governor menu
[ 0.188133] node 0 link 0: io port [b000, ffff]
[ 0.188135] TOM: 00000000c0000000 aka 3072M
[ 0.188137] node 0 link 0: mmio [a0000, bffff]
[ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
[ 0.188145] TOM2: 0000000140000000 aka 5120M
[ 0.188148] bus: [bus 00-04] on node 0 link 0
[ 0.188149] bus: 00 [io 0x0000-0xffff]
[ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.188168] ACPI: bus type PCI registered
[ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199259] PCI: Using configuration type 1 for base access
[ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.199435] mtrr: corrected configuration.
[ 0.200005] bio: create slab <bio-0> at 0
[ 0.200048] ACPI: Added _OSI(Module Device)
[ 0.200050] ACPI: Added _OSI(Processor Device)
[ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200693] ACPI: EC: Look up EC in DSDT
[ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204741] ACPI: Interpreter enabled
[ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
[ 0.204770] ACPI: (supports S0 S1 S4 S5)
[ 0.204771] ACPI: Using IOAPIC for interrupt routing
[ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204933] ACPI: No dock devices found.
[ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
[ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.218058] PCI host bridge to bus 0000:00
[ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
[ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
[ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.219665] pci 0000:00:13.5: supports D1 D2
[ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
[ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
[ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226865] pci 0000:02:00.0: supports D1 D2
[ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
[ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
[ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
[ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235177] Found 1 acpi root devices
[ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235262] vgaarb: loaded
[ 0.235262] vgaarb: bridge control possible 0000:01:00.0
[ 0.235262] PCI: Using ACPI for IRQ routing
[ 0.244778] PCI: pci_cache_line_size set to 64 bytes
[ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
[ 0.244956] NetLabel: Initializing
[ 0.244957] NetLabel: domain hash size = 128
[ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244971] NetLabel: unlabeled traffic allowed by default
[ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.246697] Switched to clocksource hpet
[ 0.251917] pnp: PnP ACPI init
[ 0.251938] ACPI: bus type PNP registered
[ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.252201] system 00:00: [io 0x040b] has been reserved
[ 0.252204] system 00:00: [io 0x04d6] has been reserved
[ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.252209] system 00:00: [io 0x0c14] has been reserved
[ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.252216] system 00:00: [io 0x0c6f] has been reserved
[ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252336] pnp 00:01: [dma 4]
[ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
[ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252767] pnp 00:07: [dma 2]
[ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253938] pnp: PnP ACPI: found 13 devices
[ 0.253939] ACPI: bus type PNP unregistered
[ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261266] NET: Registered protocol family 2
[ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.262046] TCP: reno registered
[ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262209] NET: Registered protocol family 1
[ 0.616902] pci 0000:01:00.0: Boot video device
[ 0.616913] PCI: CLS 32 bytes, default 64
[ 0.616966] Unpacking initramfs...
[ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
[ 0.677630] PCI-DMA: Disabling AGP.
[ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.677712] PCI-DMA: using GART IOMMU.
[ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.682349] Scanning for low memory corruption every 60 seconds
[ 0.682695] audit: initializing netlink socket (disabled)
[ 0.682709] type=2000 audit(1385972853.679:1): initialized
[ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695128] zbud: loaded
[ 0.695281] VFS: Disk quotas dquot_6.5.2
[ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.695554] msgmni has been set to 7910
[ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.695993] io scheduler noop registered
[ 0.695995] io scheduler deadline registered
[ 0.696025] io scheduler cfq registered (default)
[ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.696445] vesafb: scrolling: redraw
[ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
[ 0.702849] Console: switching to colour frame buffer device 80x30
[ 0.709096] fb0: VESA VGA frame buffer device
[ 0.709135] GHES: HEST is not enabled!
[ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.750958] Linux agpgart interface v0.103
[ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751860] mousedev: PS/2 mouse device common for all mice
[ 0.751927] rtc_cmos 00:03: RTC can wake from S4
[ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.752187] drop_monitor: Initializing network drop monitor service
[ 0.752254] TCP: cubic registered
[ 0.752361] NET: Registered protocol family 10
[ 0.752553] NET: Registered protocol family 17
[ 0.752565] Key type dns_resolver registered
[ 0.752847] registered taskstats version 1
[ 0.753423] Magic number: 9:957:471
[ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
[ 0.753559] PM: Hibernation image not present or could not be loaded.
[ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.755072] Write protecting the kernel read-only data: 8192k
[ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.769771] systemd-udevd[47]: starting version 208
[ 0.794492] Floppy drive(s): fd0 is 1.44M
[ 0.803163] ACPI: bus type USB registered
[ 0.803196] usbcore: registered new interface driver usbfs
[ 0.803207] usbcore: registered new interface driver hub
[ 0.804032] usbcore: registered new device driver usb
[ 0.804145] SCSI subsystem initialized
[ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.805956] ohci-pci: OHCI PCI platform driver
[ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.808453] ehci-pci: EHCI PCI platform driver
[ 0.810692] FDC 0 is a post-1991 82077
[ 0.810859] libata version 3.00 loaded.
[ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.812133] scsi0 : pata_jmicron
[ 0.812212] scsi1 : pata_jmicron
[ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.860877] hub 1-0:1.0: USB hub found
[ 0.860890] hub 1-0:1.0: 2 ports detected
[ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.917507] hub 2-0:1.0: USB hub found
[ 0.917518] hub 2-0:1.0: 2 ports detected
[ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 0.974160] hub 3-0:1.0: USB hub found
[ 0.974171] hub 3-0:1.0: 2 ports detected
[ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.030833] hub 4-0:1.0: USB hub found
[ 1.030843] hub 4-0:1.0: 2 ports detected
[ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.087499] hub 5-0:1.0: USB hub found
[ 1.087509] hub 5-0:1.0: 2 ports detected
[ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 1.643840] usb 1-1: USB disconnect, device number 2
[ 1.644033] usb 1-2: USB disconnect, device number 3
[ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.760313] ehci-pci 0000:00:13.5: debug port 1
[ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.770182] hub 6-0:1.0: USB hub found
[ 1.770191] hub 6-0:1.0: 10 ports detected
[ 1.826731] hub 1-0:1.0: USB hub found
[ 1.826742] hub 1-0:1.0: 2 ports detected
[ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.828580] usbcore: registered new interface driver usbhid
[ 1.828583] usbhid: USB HID core driver
[ 1.883417] hub 2-0:1.0: USB hub found
[ 1.883431] hub 2-0:1.0: 2 ports detected
[ 1.940057] hub 3-0:1.0: USB hub found
[ 1.940067] hub 3-0:1.0: 2 ports detected
[ 1.996722] hub 4-0:1.0: USB hub found
[ 1.996732] hub 4-0:1.0: 2 ports detected
[ 2.053388] hub 5-0:1.0: USB hub found
[ 2.053398] hub 5-0:1.0: 2 ports detected
[ 2.053683] ahci 0000:00:12.0: version 3.0
[ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 2.054699] scsi2 : ahci
[ 2.054775] scsi3 : ahci
[ 2.054850] scsi4 : ahci
[ 2.054920] scsi5 : ahci
[ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.056192] scsi6 : pata_atiixp
[ 2.056251] scsi7 : pata_atiixp
[ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.067129] scsi8 : ahci
[ 2.067200] scsi9 : ahci
[ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
[ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
[ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
[ 2.227109] ata7.00: configured for UDMA/33
[ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.540027] ata3: softreset failed (device not ready)
[ 2.540185] ata3: applying PMP SRST workaround and retrying
[ 2.540217] ata5: softreset failed (device not ready)
[ 2.540381] ata5: applying PMP SRST workaround and retrying
[ 2.540408] ata4: softreset failed (device not ready)
[ 2.540563] ata4: applying PMP SRST workaround and retrying
[ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708445] ata3.00: configured for UDMA/133
[ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.709436] ata4.00: configured for UDMA/133
[ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.716937] sdb: sdb1
[ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.719683] ata5.00: configured for UDMA/133
[ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
[ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
[ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
[ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 2.728116] ata5.00: status: { DRDY }
[ 2.728231] ata5: hard resetting link
[ 2.736521] sda: sda1 sda2 < sda5 >
[ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
[ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
[ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
[ 3.213356] ata5: softreset failed (device not ready)
[ 3.213519] ata5: applying PMP SRST workaround and retrying
[ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 3.392798] ata5.00: revalidation failed (errno=-5)
[ 8.380028] ata5: hard resetting link
[ 8.866697] ata5: softreset failed (device not ready)
[ 8.866861] ata5: applying PMP SRST workaround and retrying
[ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046260] ata5.00: configured for UDMA/133
[ 9.046276] ata5: EH complete
[ 9.052053] sdc: sdc1
[ 9.052397] sdc: detected capacity change from 0 to 1000204886016
[ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
[ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
[ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 9.103442] ata5.00: status: { DRDY }
[ 9.103556] ata5: hard resetting link
[ 9.590022] ata5: softreset failed (device not ready)
[ 9.590182] ata5: applying PMP SRST workaround and retrying
[ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 9.769458] ata5.00: revalidation failed (errno=-5)
[ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.756687] ata5: hard resetting link
[ 15.243350] ata5: softreset failed (device not ready)
[ 15.247493] ata5: applying PMP SRST workaround and retrying
[ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426255] ata5.00: configured for UDMA/133
[ 15.426271] ata5: EH complete
[ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
[ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
[ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 15.497016] ata5.00: status: { DRDY }
[ 15.501349] ata5: hard resetting link
[ 15.986684] ata5: softreset failed (device not ready)
[ 15.990999] ata5: applying PMP SRST workaround and retrying
[ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169560] ata5.00: configured for UDMA/133
[ 16.169567] ata5: EH complete
[ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
[ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
[ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
[ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
[ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.270799] ata5.00: status: { DRDY }
[ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
[ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.297504] ata5.00: status: { DRDY }
[ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
[ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.324306] ata5.00: status: { DRDY }
[ 16.328707] ata5: hard resetting link
[ 16.813352] ata5: softreset failed (device not ready)
[ 16.817758] ata5: applying PMP SRST workaround and retrying
[ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996263] ata5.00: configured for UDMA/133
[ 16.996279] ata5: EH complete
[ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
[ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 18.110443] systemd[1]: Starting Remote File Systems.
[ 18.110456] systemd[1]: Reached target Remote File Systems.
[ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
[ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
[ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
[ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.110638] systemd[1]: Starting Encrypted Volumes.
[ 18.110651] systemd[1]: Reached target Encrypted Volumes.
[ 18.110664] systemd[1]: Starting Journal Socket.
[ 18.110711] systemd[1]: Listening on Journal Socket.
[ 18.110728] systemd[1]: Starting Setup Virtual Console...
[ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.139007] systemd[1]: Mounting Huge Pages File System...
[ 18.139550] systemd[1]: Starting Journal Service...
[ 18.140217] systemd[1]: Started Journal Service.
[ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
[ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 18.806623] systemd-udevd[155]: starting version 208
[ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 19.331559] ACPI: Power Button [PWRB]
[ 19.331882] ACPI: Fan [FAN] (on)
[ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
[ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.337764] ACPI: Power Button [PWRF]
[ 19.337878] ACPI: Invalid passive threshold
[ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
[ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388553] wmi: Mapper loaded
[ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
[ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
[ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.717185] MCE: In-kernel MCE decoding enabled.
[ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.780737] [drm] Initialized drm 1.1.0 20060810
[ 19.801750] EDAC MC: Ver: 3.0.0
[ 19.808239] sky2: driver version 1.30
[ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
[ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
[ 19.870517] AMD64 EDAC driver v3.4.0
[ 19.895226] microcode: AMD CPU family 0xf not supported
[ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
[ 20.021077] kvm: Nested Virtualization enabled
[ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
[ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 20.100569] Console: switching to colour dummy device 80x25
[ 20.101154] [drm] hdmi device not found 1 0 1
[ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
[ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.158048] sp5100_tco: PCI Revision ID: 0x13
[ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
[ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
[ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
[ 20.204615] [TTM] Initializing pool allocator
[ 20.204619] [TTM] Initializing DMA pool allocator
[ 20.204630] nouveau [ DRM] VRAM: 512 MiB
[ 20.204632] nouveau [ DRM] GART: 1048576 MiB
[ 20.204636] nouveau [ DRM] TMDS table version 2.0
[ 20.204638] nouveau [ DRM] DCB version 4.0
[ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
[ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
[ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
[ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 20.204652] nouveau [ DRM] DCB conn 00: 2030
[ 20.204655] nouveau [ DRM] DCB conn 01: 1130
[ 20.204657] nouveau [ DRM] DCB conn 02: 0210
[ 20.204659] nouveau [ DRM] DCB conn 03: 0211
[ 20.204660] nouveau [ DRM] DCB conn 04: 0213
[ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
[ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.210897] [drm] No driver support for vblank timestamp query.
[ 20.211027] nouveau [ DRM] 1 available performance level(s)
[ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
[ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
[ 20.214375] ppdev: user-space parallel port driver
[ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
[ 20.288622] EDAC amd64: DRAM ECC disabled.
[ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 20.288675] fbcon: nouveaufb (fb0) is primary device
[ 20.376049] Console: switching to colour frame buffer device 128x48
[ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.376340] nouveau 0000:01:00.0: registered panic notifier
[ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
[ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
[ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 102.400046] ata4.00: status: { DRDY }
[ 102.400051] ata4: hard resetting link
[ 102.933349] ata4: softreset failed (device not ready)
[ 102.933356] ata4: applying PMP SRST workaround and retrying
[ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102326] ata4.00: configured for UDMA/133
[ 103.102330] ata4.00: device reported invalid CHS sector 0
[ 103.102340] sd 3:0:0:0: [sdb]
[ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
[ 103.102344] sd 3:0:0:0: [sdb]
[ 103.102345] Sense Key : 0xb [current] [descriptor]
[ 103.102348] Descriptor sense data with sense descriptors (in hex):
[ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.102355] 00 00 00 00
[ 103.102358] sd 3:0:0:0: [sdb]
[ 103.102359] ASC=0x0 ASCQ=0x0
[ 103.102361] sd 3:0:0:0: [sdb] CDB:
[ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
[ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
[ 103.102415] ata4: EH complete
[ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
[ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
[ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386714] ata4.00: status: { DRDY }
[ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386723] ata4.00: status: { DRDY }
[ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386731] ata4.00: status: { DRDY }
[ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386740] ata4.00: status: { DRDY }
[ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386748] ata4.00: status: { DRDY }
[ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386757] ata4.00: status: { DRDY }
[ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:

ORABPEL-10103 - failed to read wsdl

Hi,
I develop a first webservice (Employee). Then, I develop a second web service with a Partner Link to the first service... When I build the process, I obtain that error:
Error ORABPEL-10103]: failed to read wsdl
[bpelc] [Description]: Failed to read wsdl.
[bpelc] Error happened when reading wsdl at "file://D:/MyWork/BPEL_workspace/Employee/Employee.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: D".
[bpelc] Make sure wsdl exists at that URL and is valid.
The url of the wsdl file is correct.
The configuration of obsetenv.bat is
OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl"
PROXY_SET="[HTTP_PROXY_SET]"
I configure the BPEL Designer (no proxy = localhost)
Regards,
Cyryl

Hi,
Thanks for your help. I deploy the first service. Then, in the second service, I replace the absolute wsdl file path by the url of the first service.
Everything is working fine.
Have a great day,
Cyryl

ORABPEL-10903 failed to read wsdl

I have a process flow that was working nicely. I added one property in an XML document and now the process won't compile. I have removed the new line and I still receive this error. The error is:
Error: [Error ORABPEL-10903]: failed to read wsdl [Description]: in "bpel.xml", Error loading schemas from wsdl. Error while loading schemas from wsdl file at location "file:/C:/OraBPELPM_1/integration/jdev/jdev/mywork/SalesForceDemo/SalesForceCreate/SalesForceCreate.wsdl". The reason is no protocol: XMLSchema.dtd. Please verify the schemas defined in wsdl. . [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
I don't know where to look to fix this problem. Does JDev keep some compiled classes around somewhere that need to be cleaned up? This is the second process that this has occurred on. The last time I had to recreate the entire process to get it working again.
Any help would be greatly apprecated.

Hi
I am getting this error when I am trying to invoke a synshronous "CreditRating" service.
A problem occured while connecting to server "localhost" using port "9700": bpel_myOrderBooking_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "myOrderBooking" (revision "1.0"): Failed to read wsdl.
Failed to read wsdl at "http://127.0.0.1:9700/orabpel/default/CreditRatingService/CreditRatingService?wsdl", because "Failed to read WSDL from http://127.0.0.1:9700/orabpel/default/CreditRatingService/CreditRatingService?wsdl: HTTP connection error code is 502".
Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
Also,my Integration server connection is showing
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: FAILED
Please help me out...

Boot Failed, Single User FSCK couldn't load, mounting Macintosh HD failed, repair and verify returns no errors, and i need to transfer my data before starting over - HELP!!!!

Lets break down the facts here: My machine is an Intel-Based iMac running Mavericks - 1TB Hitachi Hard Drive
1. Was running an initial baseline image with Time Machine when the computer froze - waited hours - nothing got better and no functions were possible (force quit, etc.)
2. Hard Reboot
3. Upon reboot, the iMac was unable to load the log-in screen. The image was a folder with a "?" on it.
4. Rebooted with option key held down and selected Macintosh HD - Boot Failed
5. Restarted and Rebooted with Command R held down
6. Ran Disk Verify and Disk Repair - returned errors round one.
7. Ran Disk Verify and Disk Repair - Returned no Errors
8. Restart - Boot failed - the "NO" symbol replaced the apple symbol
9. Reboot with Command R
10. Attempt to mount Macintosh HD
11. Mount Failed.
12. Shutdown
13. Connect Firwire to Host computer and Target Computer
14. Boot with Command T
15. TDM entered - Host Machine cannot read Target Hard Drive
16. Shutdown
17. Boot with Command S
18. Endless loop created - Multiple errors including:
     - failed to open create the journal retval 0
     - could not read 512 bytes for the journal header - Return 22
     - Errorno 19
     - hfs_mounterror return: 22
Short of springing for a software online, I have no idea what the next steps are to getting my data moved from the Macintosh HD to my external so I can just reformat and install the OS again. Any help would be greatly appreciated, this is is a serious headache and I cannot lose my data - Thats what I was backing it up for in the first place!!!!

You may not have the luxury of having another Mac but you must know someone who does. You need to boot your Mac into target disk mode. This is going to be your best bet as far as saving your files. Keep in mind that everytime you mess with this computer you are further endangering your data. Also, once your Mac is booted as a target disk, it may be possible to mount it on a windoze computer just to copy your files to another drive. I used to have one here and if i still did I would try this for you but I "offed" it in favor on running windoze (Parallels) on my MBP. But, one way or another, you need to get next to another computer.

Error: no boot disk has been detected or the disk has failed!(pavilion 20)

Error: no boot disk has been detected or the disk has failed!(pavilion 20-b014 . The machine came originally with windows 8. I upgraded to windows 8.1 and put new hard disk. So the hard disk is fine.
However if I turn the machine off for a day and start the next day I get the "Error: no boot disk has been detected or the disk has failed".
I made the hard disk the first to boot the machine will boot and works. Is there a way to upadate the BIOS on
HP pavilion 20-b014? my bios version is 12/4/2012 v.8.09.
I do not understand why the intermittment above error showing on and off.
Please help. Thanks

Hello @Samya,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is giving you an error message stating that the boot disk could not be detected, and I would be happy to assist you in this matter!
To ensure that your hard drive you computer is trying to boot from is in working order, I recommend following the steps in this document on Testing for Hardware Failures (Windows 8). This should help determine if there is a fault with the hard drive.
If the hard drive passes all of the required tests, I recommend returning the BIOS back to its default settings by following this document on Recovering the BIOS.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Errors on boot - failed command: READ DMA

Similar Messages

Maybe you are looking for