Errors on places

Does anyone know how to drag the little red marker that pinpoints a place on Google maps in navigator, I know that some are off by as much as 1/4 mile , know I am being picky but would like to fix know address markers

Hawkins58 wrote:
Does anyone know how to drag the little red marker that pinpoints a place on Google maps in navigator, I know that some are off by as much as 1/4 mile , know I am being picky but would like to fix know address markers
If I remember correctly that option has been removed from Google Maps a few months back, I never used it so I am not sure but I remember reading this.   I believe they replaced it with the Favorites option..

Similar Messages

  • Error: decimal places not allowed

    Hi,
    I am entering a PO in currency JPY(Japanese Yen).However when I try to enter a PO with net price for one of the items as say 2.71,it gives error decimal places not allowed.
    I have maintained currency rate as 100 local currency=3.1 Yen
    It only gives problem while using this currency.
    What is the way out ?
    Regards,
    manOO

    Hi,
    Check the config of the currency code (OY04), it is probably set to not allow decimal places.
    If this is the case, don't change it, simply enter a price of 271 with a price unit of 100, in the PO. This will give you a price of 2.71 for one
    Steve B

  • EWT Error: Business place/Section Code TAN1 in company code  does not exist

    Hi all
    Could I have the configuration required for EWH Tax .
    Business Place has been configured in Korea and also Section Code defined. No. Range Groups, No. Ranges were defined and assigned for Remittance Challans and Certificates.
    I posted an invoice by F-43 and tried to Create Remittance Challan by J1INCHLN, after filling all the required fields and having 'executed', the system gives an error:
    "Business Place for document could not be determined"
    Message no. 8I707
    Could anyone guide me through how to come out of this problem.
    I Created following step created
    Define Business Place
    Com.code     Sec Code      Name1
    LA01          TAN1          Head Office
    Define Section Code
    Sec Code  Name1            Busi Place   Name 1                       Local Tax Code     Dis.Tax Office
    TAN1     Head Office     HOLA     Head Office for LA01     LA1                   LA1
    Thanks & Regards
    Selva

    Hi All
    I already created in Business place  and assign business place  also
    But any way i am getting  error, please  let me how to close this issue
    Define Business Place
    Busi.Place     Name1
    HOLA          Head Office for LA01
    Define Section Code
    Sec Code   Name1             Busi Place   Name 1                         Local Tax Code         Dis.Tax Office
    TAN1      Head Office     HOLA        Head Office LA01          LA1                               LA1
    Thanks & Regards
    Selva

  • Application Error in Place order page

    Hi all,
    In istore site I got "Application error" in "place order" page for some customers, but other customers its working fine, and i checked the log file it shows CC holder is "Null". So please give some idea regarding this issue.
    java.lang.NullPointerException
    at
    oracle.apps.ibe.shoppingcart.quote.ShoppingCart.savePaymentInformation
    (S
    hoppingCart.java:4077)
    at
    oracle.apps.ibe.shoppingcart.quote.ShoppingCart.savePaymentInformation
    (S
    hoppingCart.java:3819)
    at
    oracle.apps.ibe.shoppingcart.quote.ShoppingCart.saveCCPayment(Shopping
    Ca
    rt.java:4412)
    at
    oa_html.__ibeCCkpBHdrBillPay._jspService(__ibeCCkpBHdrBi
    ll
    Pay.java:2280)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
    at
    oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
    at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
    at oracle.jsp.JspServlet.service(JspServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at
    org.apache.jserv.JServConnection.processRequest(JServConnection.java:4
    56
    at
    org.apache.jserv.JServConnection.run(JServConnection.java:294)
    at java.lang.Thread.run(Thread.java:595)Thanks
    Bala

    Bala,
    Most probably you need to clear the server cache or compile the JSP pages (depends on your application release) -- Please see (11.5.0/12: Oracle iStore Checkout Error: "500 Internal Server Error OracleJSP" [ID 577510.1]) for details.
    Thanks,
    Hussein

  • ERROR in place of INR

    Hello Experts,
    In one of the BI reports, for a Key Figure(KF) currency is displayed as ERROR in place of INR althouth the currency is correctly assigned in DSO.
    KIndly suggest.
    regards
    KV

    Hi,
    There might be a possibility of data mismatch.
    Just wanted to confirm this...
    1. Have you used RSCUR for currency conversion? Has the same var been used in the report?
    2. What all params have you set in the DSO as a Currency Key (0WAERS)? 
    Try using the value in a formula variable using NODIM( Value ). This will eliminate INR, but just an extra help if currency key is not of prime importance.
    Thanks,
    Arun Bala

  • WHT Error - Business Place for document  could not be determined

    Hi Gurus,
    I am getting error while creating remitance challan " Message no. 8I707 - Business Place for document  could not be determined "I have check all the configuration related to business place, section code and remittance challan number range and it seems ok.
    would request you to help me to workout this issue.
    Regards,
    Rahane D

    Hi,
    Please refer to this SAP note to find out the exact error in J1INCHLN
    SAP Note 1465529 - CONSULTING NOTE FOR J1INCHLN
    In addition to this please refer to the following link in case you find out that the posted documents have missing Business place updated..
    Re: Subsequent implentation of EWT (Challan and Certificate)
    Regards,
    SAPFICO

  • Errors with places.

    I have a few errors happening with iPhoto places.
    (Before I start I have latest updates on all of my software and latest Mac OSX)
    1 - When typing in the search it doubles up my characters. For example if I start to write London, after typing L then o it will show as "LLo", and then "LLoon", etc.
    2 - Some custom places locations show in the search (before pressing the search button), some don't. When searching nothing happens at all.
    3 - When looking at the places map and zoomed out some of the pins say "Unnamed location" or sometimes an older pin that I've renamed since. This problem is sorted when zooming in but is rather annoying.
    (I've seen that Window-Manage My Places solves this, but when pins are merging they still say "Unnamed location")
    I've also tried rebuilding the iPhoto library and that didn't help.
    If anyone can help on any of these I'd be very grateful.
    Thanks
    Message was edited by: j.ingham06
    Message was edited by: j.ingham06

    Thanks for the reply but I have concluded that apple have spent little time and money in developing this feature.
    For a while I thought I'd solved the problem where it wouldn't find my custom locations, however it has returned so I can only search for some of them and not others.
    It still doubles up on some characters when searching, which in my eyes is the worst thing about the software. However I'm not that bothered about that as the search never works anyway.
    Today I added a few places and they work but don't show on the map and older ones still show on the map.
    Also, when using Manage My Places, the one's I've deleted in the past, and then deleted in Manage My Places are still showing the next time I go there.
    The whole feature is just one big hack that really doesn't work and I'm afraid apple's reputation of "it just works" really isn't being lived up to.

  • TDS INDIA - error "business place could not be determined"

    Hi all Indian SAP Gurus!
    I am from Sweden and trying to configure Indian TDS.
    I have succeeded to create a vendor invoice in fb60, entering business place and section code and the posting looks all good so far.
    I have created a business place called HO, a section code called SC01 and allocated them to my company code 2200.
    But when I am trying to run transction J1INCHLN I get the following error message (8i707):
    "Business place for document could not be determined".
    I have read a lots of threads regarding this but I suppose I have misunderstood something.
    When I look at the document in fb03 I can see the business place on the posting!
    I don't know if I have understood all about the number ranges correctly.
    Please confirm the following settings:
    J_1IEWTNUMGR:
    - 194C numgr 55
    -194I numgr 56
    194j numgr 57
    J_1IEWTNUM
    num group 55 - internal group 55
    num group 56 - internal group 56
    num group 57 - internal group 57
    J_1IEWTNO - get error message "The maintenance dialog for J_1IEWTNO is incomplete or not defined". Instead this is maintained in transaction JI1NNUMBER where I allocated intervalls of number to number ranges:
    55: 0055000000-0055999999
    56: 0056000000-0056999999
    57:0057000000-0057999999
    J_1I_SECCODE: Section code (one section code)
    V_SECCODE: HO (one business place)
    SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Manintain groups and SAP Script forms:
    2200     SC01     194C           J_1IEWT_CERT     55
    2200     SC01     194I           J_1IEWT_CERT     56
    2200     SC01     194J           J_1IEWT_CERT     57
    Notice that I have not entered any section type.
    SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Assign number ranges to number groups:
    num group 55 - internal group 55
    num group 56 - internal group 56
    num group 57 - internal group 57
    SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Manintain number ranges:
    55: 0055000000-0055999999
    56: 0056000000-0056999999
    57:0057000000-0057999999
    I would very much appreciate if ypu could help me with this! I will give you a lot of points!
    Thank you very much in advance!!!!
    Best regards,
    ÅSA

    Hi!
    I have now deactivated as you said:
    -then reversed all invoices in fb60
    -then activated
    -posted a new invoice in fb60
    But still I have the same error message....
    More information: When I go to transaction j1inpp to update business place information in FI document.. When trying to see the alternatives of business place and sector code I see our business place but canät see any sector codes!! How come? I go to table V_seccode and there I see my sector code???? Strange!!!
    I have now created a new section code and deleted the old one. And made same settings as before. I have also posted a vednor invoice. But still the same message...
    Edited by: asafo364 on Apr 21, 2010 1:39 PM

  • Error while place in storage migo A 10

    Dear All,
    I am having a problem in placing the materials into storage while doing MIGO A10(place in storage).
    *The error note tells that PL STOCK EXCEEDED BY 200 KG.
    Message no: M7022*
    In diagnosis:
    specified stock level or quantity exceeded by 200 kg
    I then checked the material if it is present in stock in transit. It was having 30 quantities showing in stock in transit.
    Do i have to remove the material from stock in transit in prod server so that i can post the entire quantity of the material.
    pl discuss.

    Hi,
    Please refer to SAP Note 392205
    M7022 - PL Stock in transit exceeded by 1 PC
    Hope this helps
    regards,
    SShetty

  • How do I get the Adobe Presenter trial .exe file to run? I'm getting an error requiring placement into a designated folder,

    Getting an error trying to run the Adobe Presenter trial .exe file because it is requiring that the file be placed in a designated folder with the other downloaded file. How do I solve this problem?

    Thanks, the offset command worked well. I did have to modify the script some more, there was really no reason for the first repeat loop using the offset command. Also, I had set my text item delimiters to tab for another script, and that was causing problems running this script. I think I have everything fixed now. This is the final version.
    set my_folder to choose folder
    tell application "Finder"
    set myfolderstring to name of my_folder as string
    set myfolderlist to every character of myfolderstring
    end tell
    set mycolorlist to {"A_Green", "B_Teal", "C_Purple", "D_Pink", "E_Yellow", "F_Orange", "G_Blue", "H_Black"}
    set my_break to offset of "_" in myfolderstring
    set the_code to items 1 thru (my_break - 1) of myfolderlist
    set the_code to the_code as string
    repeat with i from 1 to number of items in mycolorlist
    set the_color to item i of mycolorlist
    tell application "Finder"
    make new folder at my_folder with properties {name:the_code & "_" & the_color}
    end tell
    end repeat

  • Error : in  placement of Macro with ABAP code

    Hi,
    I have to replace the Macro rp-provide-from-last for 0105 infotype with subtype 05 and pn-begda ,pn-endda.please send me the code.
    thanks in advance.
    bye
    raj.

    Write as :
    sort p0105 by pernr SUBTY begda descending.
    loop at P0105 where SUBTY = '05'
                         and    endda >= pn-begda
                         and    begda <= pn-endda.
       i_p0105 = p0105. <----
    endloop.

  • Cash Journal - Business Place error

    Hi
    I have saved a document in cash journal and trying to post the same. However, I'am getting the following error:
    "Business place Fina does not exist in company code 1000
    Message no. F5893"
    1) I have not created any Business Place yet,
    2) Further, I have not entered any Business Place in the Cash Journal Document also.
    Can anybody help me resolve the issue.
    Regards
    Abhishek Kumar

    Hi,
    Check T Code: FBCJC0, You should not specify the Additional Text in the last column of this T Code.
    I am pasting the same help text here for your reference.
    Additional Field for Cash Journal
    This field contains additional information for the cash journal.
    Use
    In Argentina, Brazil, and Thailand, enter the business place.
    In Russia, enter the designation (position) of the CEO as you want it to appear on receipts.
    Thanks
    Chandra

  • Aironet 1240AG error - "Previous authentication no longer valid" Help!

    Greetings!
    I am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
    Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
    And at first, it is not!
    I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
    I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
    The error I get in the log is
    Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
    So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
    I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
    But now I believe I must have some setting wrong.
    Could someone please shed some light on this situation for me! I searched the forums but could not find this error message in this context.
    Thanks!
    Nate York

    Interesting...I am experiencing the same problem, but when adding another laptop to the existing 5 Aironet 1100's. The existing laptops work fine, but when trying to add another node, I see the problem. I get the following error message in the error log as well as the activity screen;
    Interface Dot11Radio0, Deauthenticating Station 0002.2d34.a0fe Reason:
    Previous authentication no longer valid
    Unit - 6 units
    Cisco Aironet 1100 version 12.3.(07)JA
    The error takes place with no other units online, or when other units are in use. Also the laptop in question "shows" connected to the AP (yes I have tried other APs all with negative results). The settings on the laptops are all the same, so i am at a loss.
    Any suggestions greatly appreciated,
    Ralph

  • HT201210 What to do when error message "Ipad server can not be contacted"

    Trying to update ipad with current ios4 software and itunes is displaying error message of itunes server can not be contacted.  How do I get around this??

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Business Place for document  could not be determined

    Hi,
    When I am posting Remittance challan I am getting this following error,
    "Business Place for document  could not be determined".
    Could any body please help me to solve this problem.
    I maintained the following settings in system
    1. T-Code: J_1IEWTNUMGR
    UN04     SC04     194C     02
    2. T-Code: J_1IEWTNUM
    02     02
    3. T-Code: J_1IEWTNO
    Maintained Number ranges
    I posted vendor document and I gave Business place and Section code also. Even After all the settings I am getting this problem. Please let me know is there any steps I missed are any thing I have to maintain in system.
    Best Regards
    Raj

    Hi Pavan,
    Thanks for you replay. I checked in table, data available in the table J_1IEWTNUMGR against Company code, Business place and Off Key.
    One more question is whether we need to give Business place or Section code while creating TDS challan using J1INCHLN. It will appear like "Business Place/Section Code" in the screen. If I select from drop down It is taking Section code. Is it possible to change the logic from Section code to Business place.
    Thanks & Regards
    Raju.

Maybe you are looking for