Errors Reader X and Junction points
Hi, I make extensive use of junction points in my Windows systems (XP SP3 and SBS 2003SR2) and since installing Reader X when I attempt to open a pdf document on local drive with a junction point I get the error message "An internal error occurred" followed by "Runtime Error! > Program C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe > abnormal program termination". If I open the same document from a network share when the file is contained in a junction point directory the reader opens but I am greeted with an Adobe Reader dialogue window which contains the following "There was an error opening this document. Access denied", if I open the same document from the source directory on the same share everything works fine. I would love to hear of a solution otherwise I hope that this issue will be addressed promptly, as the last V9 reader had no such problems. Cheers, Rob
Hi All,
We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available at https://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
We look forward to your active participation, feedback and help towards making Reader a better product.
Thanks and regards,
Adobe Prerelease Team
Similar Messages
-
Hyperion Smart View Error in Word and Power point
Hi,
When I retrieve (Import) a report (FR) into MSpowerpoint or MS word I am getting an error message "The specified file wasn't found". Has any one faced this error before?
Any thoughts please !!!!
Help Appreciated.
Thanks,You most likely have a SV template set up and are trying to share that template, correct? The functions are looking for the SV xla in the bin folder, so if SV is installed in different paths, then your SV template will produce that error. When you first open the template and you get the update links, select edit, then browse to where the user has SV installed and go to the bin folder. This should update those functions.
-
Time Machine Service Page in Server App says "Error Reading Settings"
I have a Mac Mini running 10.8.3.
For some reason the Time Machine Page in the Server App refuses to work properly. If I reboot the server it looks fine for about 10 minutes. It displays the backup location and the list of individual backups. Then I get this message:
25/03/2013 14:37:51.673 Server[286]: Error: The server '127.0.0.1' reported an error while processing command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7fdc1b2445e0 {NSLocalizedDescription=An unknown error occurred}
Also the Time Machine page in Server Apps is blank apart from "Error Reading Settings" and the slider at the top says Time Machine is off.
However Time Machine does work for some clients.
Anyone got any idea?
I think it started having problems when I got a "The network confirguration has changed" alert.Hi Linc Davis
here are the logs from reboot to failure to load:
26/03/2013 16:57:50.256 servermgrd[1379]: [1379] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 16:59:55.633 servermgrd[1527]: [1527] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:01:58.077 servermgrd[1546]: [1546] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:04:03.937 servermgrd[1561]: [1561] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:04:05.220 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4620f20 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 17:06:07.359 servermgrd[1666]: [1666] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:06:07.829 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getBackups' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac480f000 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:18:51.737 servermgrd[1678]: [1678] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:18:51.777 servermgrd[1678]: [1678] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:20:55.346 servermgrd[2846]: [2846] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:20:55.381 servermgrd[2846]: [2846] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:57.682 servermgrd[2861]: [2861] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:57.683 servermgrd[2861]: [2861] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:58.114 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4836250 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:25:00.016 servermgrd[2872]: [2872] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:25:00.135 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac494c120 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:26:02.690 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getBackups' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4826a80 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:33:51.868 servermgrd[2886]: [2886] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:33:51.901 servermgrd[2886]: [2886] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:35:54.539 servermgrd[2932]: [2932] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:35:54.580 servermgrd[2932]: [2932] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:37:56.926 servermgrd[2947]: [2947] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:37:57.424 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac472ad50 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:39:59.284 servermgrd[2958]: [2958] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:40:01.135 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getState' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4657ce0 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:42:04.286 servermgrd[2973]: [2973] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:42:04.322 servermgrd[2973]: [2973] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:45:20.502 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getState' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac43f84a0 {NSLocalizedDescription=An unknown error occurred}
27/03/2013 11:56:52.191 servermgrd[110]: [110] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
27/03/2013 11:58:54.217 servermgrd[371]: [371] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out -
Hi,
i met a problem in lion server. When i open the wiki server admin, it showing "error reading setting " and the safari showing:
Collaboration::NSInvalidArgumentException in Sources#index
Showing /usr/share/collabd/coreclient/app/views/layouts/application.html.erb where line #5 raised:
-[__NSCFDictionary setObject:forKey:]: attempt to insert nil value (key: com.apple.server.collab.DBConn)
Extracted source (around line #5):
2: :user => @user,3: :entity => @entity,4: :owner => @owner,5: :service_client => service_client,6: :controller => controller7: }) %>8:
Rails.root: /usr/share/collabd/coreclient
Application Trace | Framework Trace | Full Trace
app/controllers/application_controller.rb:347:in `service_client'app/views/layouts/application.html.erb:5:in `_app_views_layouts_application_html_erb___1616978790_2229921480_0'app/controllers/application_controller.rb:44:in `render_server_error'app/controllers/application_controller.rb:43:in `render_server_error'
Request
Parameters:
None
Show session dump
Show env dump
Response
Headers:
NoneSolved! At least for me...
I have described all solutions to the major problems I've been having from a crippled 10.7.3 install to a flourishing one here:https://discussions.apple.com/message/17740033#17740033
Hope this helps! -
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."
Are you really using Windows ME?<br />
Your More system details list shows an IE8 user agent
You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
"Error reading reporting point information" message no. RM111
Hello friends,
I am doing the Reporting point backflush for a material and getting the error "Error reading reporting point information", message no. RM111.
i have given the milestone confirmation for the last operation in the rate routing for that material.
Even in REM Profile, Mandatory Reporting time backflush is activated.
In the production version of that material i have given the group of rate routing created for that material in Rate Routing field.
I have created the product cost collector for that material and production version. With costing lot size 1, even i have calculated the cost for that product cost collector. Though regarding costing couple of errors came, than also i saved it.
I am not sure whether system has created the reporting point while creating the product cost collector.How to check it?
Now for that material we have created the planned order.
Now when i am doing the backflush in MFBF t.c by giving the material code,plant and production version, system is throwing the error " Error reading reporting point information.
Thanks and Regards,
JitendraHello siva,
i executed the transaction MF30 as suggested by you, there system displayed following costing errors:
"No control record for Activity type PLVD/1301/ASBY in version 000 / 2010 activity planning/qty planning
Message no. KL023
Diagnosis
No activity planning or quantity planning has been carried out for Activity type PLVD/1301/ASBY in version 000 and fiscal year 2010.
Procedure
Activity Type Planning for cost centers or
Planning Quantities and Prices for business processes.
Even system is not picking the component prices, system throwing the error NO price could be determined for the material and batch so and so.
We are using the Preliminary cost estinmate.
is because of this system is not able to create reporting point in product cost collector?
Please Replay -
I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Dear All,
I've receive a error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Due to this had cause me unable to back up my iphone. Please advice how can i reslove this.
This happens after I install Sumsung application on my PC.Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
MBP "System Profile" error when try read "Logs" and long time blue screen
MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mAHello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
DPM encountered an error while reading from the recovery point used for recovery.
Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Is the DFS replication DFsrPrivate a junction point folder and if so where are the files stored?
We have DFS replication set and see an arrow against the folder DFSrPrivate. Do the files reside at this location or elsewhere?
Thanks
DavidHi David,
The DFsrPrivate folder resides at replicated folders. This folder is in reality a junction point or, in simpler terms, a link to another location on the volume. It seems to point to a path under the ‘System Volume Information’ folder on the same volume.
For more detailed information, you could refer to the article below:
Backup/Restore of DFSR Replicated Data - Part 2: Inspecting DFSR's Footprint
http://blogs.technet.com/b/filecab/archive/2008/06/22/backup-restore-of-dfsr-replicated-data-part-2-inspecting-dfsr-s-footprint.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SNP Optimizer Read Error Error id : 600 and Error id : 812
Hi All,
I am rebuilding my SNP in a new SCM environment. I have transfered my PDS's and WorkCenters/Capacity via the CIF. These appear fine when I display and have performed the LC Check for the resouces using the TOOLS at /n/sapapo/res01 tcode but all appeared green. I am using standard Hierachies and think they are fine and assigned to the Planning area correctly.
When I press the "oprimizer" ...It runns until it gets to the "Loading Planning Data" then it fails with a "Error when Reading Planning Data" and "Optimizer: an internal error occured". This error occurs very quick once it starts this process and complexity does not seem to matter.
When lookinjg at the Trace File of the log I see the below activity that seems to be the cause but I do not know what the errors mean or where to reference them? Has anyone else encountered this previousluy or know where can investigate this further. Any help or directions on Error id : 600 and Error id : 812 would be great!
Thanks in advance for all your assistance in this!
===
<i> 19.04.2011 19:04:39 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 801 to OutputInterface from []
<i> 19.04.2011 19:04:40 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 19.04.2011 19:04:41 snpopsvr_script.cpp(176) 'SuperVisor' Running in 700 data version mode...
<i> 19.04.2011 19:04:41 snpopsvr_script.cpp(862) 'SuperVisor' Interpreted run time limitation as minimum run time (300 sec.), set run time limitation to 900 seconds.
<i> 19.04.2011 19:04:41 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 803 to OutputInterface from []
<i> 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->init
<i> 19.04.2011 19:04:43 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'SNPRModelGenerator' [6]->init = success [ctx size : 0]
<i> 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->download
<i> 19.04.2011 19:04:43 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/MSDP_OPT_UPLOAD
<e> 19.04.2011 19:04:53 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
RFC_RC (RFC_EXCEPTION) Exception raised
RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
key=ERROR
message=ERROR
exception=ERROR
<i> 19.04.2011 19:04:53 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
<i> 19.04.2011 19:04:55 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_linuxx86_64 = 79488
[CHECK_LOWERBOUND]
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
SNP BuildMode Release
SNP Runtime requested 900
tracefile optsvr_trace20110419_190439_2e12.log
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
<i> 19.04.2011 19:04:56 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...Thanks for the reply...
I was able to manually enter and save an SNP planned order via the planning book.
I have failures where my Input material is UOM=TON and Output is UOM=TON and also where input is UOM=TON and output is UOM=KG. I am able to switch between these UOM's in the planning book and product view.
When I have DEBUG2 on via OPT10 I see:
Message Log:
Input parameters
Customizing Settings
Active BAdI Implementations
Step 1: Data read and model creation started at 16:36:35 on 04/22/2011
Runtime 00:00:00 to measuring point Step_1_Start
Runtime 00:00:01 to measuring point Initializations
Runtime 00:00:00 to measuring point Arc_Read
Runtime 00:00:01 to measuring point SNP_Planed_Order_Deletion
Runtime 00:00:00 to measuring point Procurment_and_Transport_Order_Deletion
Runtime 00:00:00 to measuring point Arcmat_Read
Error occurred when reading data
Trace File:
<1> 22.04.2011 16:36:36 rfc_connection.cpp(631) 'MsgMgr' <rfc> RfcCall for /SAPAPO/MSDP_OPT_UPLOAD
<1> 22.04.2011 16:36:36 rfc_connection.cpp(640) 'MsgMgr' <rfc> RfcReceive for /SAPAPO/MSDP_OPT_UPLOAD
<2> 22.04.2011 16:36:38 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:40 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:42 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<e> 22.04.2011 16:36:43 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
RFC_RC (RFC_EXCEPTION) Exception raised
RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
key=ERROR
message=ERROR
exception=ERROR
<i> 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
<i> 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
<i> 22.04.2011 16:36:43 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
Thanks again! -
Error reading/writing file message when opening garageband and/or files
I've been recently getting this message when I open garageband and files
"Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.i give up with this discussion forum no no one knows anything
-
has anyone had an issue that lightroom has error reading preview cache and closes immediately. what can i do to correct this
Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"
Maybe you are looking for
-
Is it better to make multiple arrays of data or one big array and access it many times?.
I am going to acquire up to 5 samples per second of 50 channels over 30 minutes then average ten of the channels and generate a report. There are other bits of information needed to complete my task and graphs. Would it be "faster" for the PC to ha
-
Dear Experts, I am trying to get the AP Aging by Document Currency (instead of Local Currency) using the format as per S_ALR_87012078 (instead of S_ALR_87012085). I have created a from copy from 0SAPDUEAN-01 but I could not find any characteristic th
-
Have just had a look at the Infinity web page and had a good laugh especially the gaming section about low pings,this is far from the reality at the moment. In previous post I mentioned been unable to play Steam based games this has been the case for
-
We've made some changes to our home page in a quest to simplify it and to help you find things easier. If you encounter any difficulties, please do let us know. Thanks and back to your regularly scheduled programming :-) Al Sparber - PVII http://www.
-
That kinda says it all. How do I drop files?