Errors reoccuring in backup log - lost+found and quota.user

The files below were logged in my backup log. I sychronize about a 110GB of data between two nslu2's weekly. These same three errors come up during every backup. The backup typically doesn't have any trouble finishing. I did use quotas on some of my users, but have since disable user quota's. Any ideas? I have run scandisk as well as searched for them in the folder and couldn't find them. thanks.
11/19 23:46:50 Backup: Error occurs in job 'PDriveAdmin1', cannot write file '//10.0.0.231/ADMIN 1/quota.user~'.
11/19 23:46:49 Backup: Error occurs in job 'PDriveAdmin1', cannot write file '//10.0.0.231/ADMIN 1/quota.user'.
11/19 23:46:40 Backup: Error occurs in job 'PDriveAdmin1', cannot open destination directory '//10.0.0.231/ADMIN 1/lost+found'.

I appreciate this is very old by now, but I was wondering did you ever get a answer/resolution to this?
I have exactly the same issue - have had for a long time - but can't find any other information on it.

Similar Messages

When attempting to play songs on itunes, getting error message that file cannot be found and asked if i want to locate it. not sure where it went. do have new computer and all files were transferred to new machine.

I just tried to play some songs that i have in itunes and i get an error message that says file can't be located. It appears to be on about half the songs of the thousands I have in there. I do have a new computer and transferred the itunes library about a month ago. I have successfully managed ipod on new computer. I wonder if it is a licensing issue but this is just the second computer althought the third hard drive these songs have been on. It is affecting songs loaded from CD's and purchased from itunes on the old computer alike.

Hi angela dfromtx,
When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. You'll have to locate the file manually if it is still available. For more information refer to the following article:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

I keep getting an error message when I log onto Firefox and I can't figure out how to fix it, can you help?

Every time I log onto Firefox I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
I am running Windows 7 - 64 and am using Avast Internet Security 2013.

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

Error from the session log between Informatica and SAP BI

HI friends,
      I am working extraction from bi by Informatica 8.6.1.
      now, I start the process Chain from bi, and I got a error from Informatica's session log.Pls help me to figure out what's going on during me execution.
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6228     Writing session output to log file [D:\Informatica\PowerCenter8.6.1\server\infa_shared\SessLogs\s_taorh.log].
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6014     Initializing session [s_taorh] at [Fri Dec 17 11:01:31 2010].
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6683     Repository Name: [RepService_dcinfa01]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6684     Server Name: [IntService_dcinfa01]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6686     Folder: [xzTraining]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6685     Workflow: [wf_taorh] Run Instance Name: [] Run Id: [43]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6101     Mapping name: m_taorh.
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6964     Date format for the Session is [MM/DD/YYYY HH24:MI:SS.US]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6703     Session [s_taorh] is run by 32-bit Integration Service [node01_dcinfa01], version [8.6.1], build [1218].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24058     Running Partition Group [1].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24000     Parallel Pipeline Engine initializing.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24001     Parallel Pipeline Engine running.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24003     Initializing session run.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1569     Server Mode: [UNICODE]
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1570     Server Code page: [MS Windows Simplified Chinese, superset of GB 2312-80, EUC encoding]
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6151     The session sort order is [Binary].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6156     Using low precision processing.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6180     Deadlock retry logic will not be implemented.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38029     Loaded plug-in 300320: [PowerExchange for SAP BW - OHS reader plugin 8.6.1 build 183].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38024     Plug-in 300320 initialization complete.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     PCCL_97003     [WARNING] Real-time session is not enabled for source [AMGDSQ_IS_TAORH]. Real-time Flush Latency value must be 1 or higher for a session to run in real time.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38016     Reader SDK plug-in intialization complete.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6307     DTM error log disabled.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TE_7022     TShmWriter: Initialized
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6007     DTM initialized successfully for session [s_taorh]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24033     All DTM Connection Info: [<NONE>].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24004     PETL_24004 Starting pre-session tasks. : (Fri Dec 17 11:01:31 2010)
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24027     PETL_24027 Pre-session task completed successfully. : (Fri Dec 17 11:01:31 2010)
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24006     Starting data movement.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6660     Total Buffer Pool size is 1219648 bytes and Block size is 65536 bytes.
INFO     2010-12-17 11:01:31     node01_dcinfa01     READER_1_1_1     OHS_99013     [INFO] Partition 0: Connecting to SAP system with DESTINATION = sapbw, USER = taorh, CLIENT = 800, LANGUAGE = en
INFO     2010-12-17 11:01:32     node01_dcinfa01     READER_1_1_1     OHS_99016     [INFO] Partition 0: BW extraction for Request ID [163] has started.
Edited by: bi_tao on Dec 18, 2010 11:46 AM

INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8167     Start loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8168     End loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8141
Commit on end-of-data Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8143
Commit at end of Load Order Group Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8035     Load complete time: Fri Dec 17 11:01:32 2010
LOAD SUMMARY
============
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8043     ****END LOAD SESSION****
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8006     Writer run completed.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24031
RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [VENDOR] has completed. The total run time was insufficient for any meaningful statistics.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24005     PETL_24005 Starting post-session tasks. : (Fri Dec 17 11:01:33 2010)
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24029     PETL_24029 Post-session task completed successfully. : (Fri Dec 17 11:01:33 2010)
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38025     Plug-in 300320 deinitialized and unloaded with status [-1].
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38018     Reader SDK plug-ins deinitialized with status [-1].
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     TM_6018     The session completed with [0] row transformation errors.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24002     Parallel Pipeline Engine finished.
INFO     2010-12-17 11:01:33     node01_dcinfa01     DIRECTOR     PETL_24013     Session run completed with failure.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6022
SESSION LOAD SUMMARY
================================================
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6252     Source Load Summary.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1537     Table: [AMGDSQ_IS_TAORH] (Instance Name: [AMGDSQ_IS_TAORH]) with group id[1] with view name [Group1]
      Rows Output [0], Rows Affected [0], Rows Applied [0], Rows Rejected[0]
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6253     Target Load Summary.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1740     Table: [VENDOR] (Instance Name: [VENDOR])
      Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6023
===================================================
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6020     Session [s_taorh] completed at [Fri Dec 17 11:01:33 2010].

Backup Problems - Lost photos and videos

I have just taken delivery of the 4G and it doesn't seem to have picked up on the "Camera Roll" photos and videos that I had with the 3GS. I made sure to back up the old phone before retoring it to factory settings (I have sold it).
When I tested it to make sure that all my info was off the old phone iTunes was still showing it as my account. So, probably stupidly, I logged out of my account, renamed the phone and restored it again. This didn't help but I think it may have "lost" the photos and videos that I had previously.
I have looked on the laptop for the files to try and restore them manually but without luck. Can you tell me where they may be and how I might recover them?

The camera roll (photos taken by the iphone or ipod screen snaps) are not backed up with a sync. They must be extracted from the iphone3G prior to restoring it using iphoto(mac) or a digital camera wizard(windows).

I am unable to use the about:permissions command from the url bar, when I use this command receive error message "The url is not found and cannot be loaded".

This was advertised as a new security feature in the nightly build . Is this true has this security been added to Firefox 5.0 or only certain Firefox builds ?

Yes, that about:permissions page has recently been added to the Nightly builds (7.0a1), but the Aurora builds (6.0a2) have it as well. I don't think that Firefox 5 will get it.
* [https://bugzilla.mozilla.org/show_bug.cgi?id=573176 Bug 573176] - Implement Site-Specific Privacy Preferences
* http://www.mozilla.com/en-US/firefox/channel/

Automatically log out idle and disconnected users

Hi,
Windows Server 2008 R2 Domain.
Im trying to have users that are connected with RDP to other servers and clients to automatically log out if there are idle og disconnected for more than 30 minutes. Im able to get it working if i use computer configuration, but I want this to work under
user configuration, so im not sure what I am doing wrong.
I have configured the following. Created a single GPO on the root of the domain, and put a desktop 7 client in this container. Then i have configured a GPO with the following settings: User Configuration>Policies>Administrative Templates>Windows
Components>Remote Desktop Services>Session Time Limits: Here I have enabled "Set time limit for disconncted sessions", "Set time limit for active but idle...." and "End session when time...."
If i check the GPO, under security filtering i have Authenticated Users, and they have read and apply, and it is linked to the correct OU.
If I now log in to my client and do a gpupdate /force log out and in again, I can see the GPO is not applied correct. The strange thing is that is named under Computer Settings> The following GPOs were not applied because they are filtered out.. here
is my GPO and reason is "Not applied (Empty). Under User settings there is no such GPO applied...
I thought that it should have been under user settings .... if i configure the GPO as a computer settings it works.... but should not this also work for users ?
/Regards Andreas

It will come at : User Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Session Time Limits
Refer below link
http://technet.microsoft.com/en-us/library/cc753112%28v=ws.10%29.aspx
It will come means, you will find the settings at the mentioned path. That's for terminal session can be applied on servers not necessarily only for Terminal servers.
Best practice is to add security group in the security filter. But yes if you have less number of users, you can add them directly.

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

HT1923 After updating Itunes it stopped working. I removed Itunes and reinstalled and i am getting the foloowing errors MSVcr80.dll not found and Itunes not installed correctly error 7 (window errror 126) How do I fix this?

Yesterday I updated my Itunes account and it stopped working. I tried installing itunes version 11.1.4 and once done it came back with 2 error messages MsvCR80.dll was not found and I tunes was not installed correctly Error 7 (windows error 126) I have removed Itunes completely and redownloaded several times with the same result. Is there an easy fix or can I download an older version of Itunes that works?

None of the solutions mentioned in this forum work for me. I've not ever had a problem with your software before. I installed and uninstalled itunes 3 times. No itunes directories exist. I've uninstalled everything labled Apple on my pc withe the same results. The problem is with your software not Windows.

No backup history was found,choose a different directory path in sharepoint 2010

Hi,
i have a backup files with me ,to restore those files the steps i have followed are
1.sharepoint central administrator
2.backup and restore option
3.restore from backup
4.selecting location of back files
5.clicking on refresh.
but i am getting the error called "no backup history was found,choose a different directory path"
kindly help me to come out from this problem

Hi Soni ,
Files extension is .bak and I have full rights to access the files. still I am facing same problem.
Moreover I tried with following commands in cmd
>cd C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN
>stsadm –o restore –url http://win-4ljt0cun8af:12707/smaple2/SitePages/
-filename E:\sharepoint project\PortalBkp\PortalBkp\spbr0000\00000000.bak
And
>stsadm –o restore –directory E:\sharepoint project\PortalBkp\PortalBkp\spbr0000\
-restoremethod overwrite
But I am getting "command line error”
Kindly help me.
Thanks,
Suriya G

Repaired ext. HD. What to do with Lost Found folder?

Hi All,
OSX Mavericks, Macbook Pro 2010 + Western Digital MyBook External Harddrive
I recently deleted an empty partition from my external HD (WD Mybook, 1TB). I then wanted to resize the remaining partition (still containing data) so that it could use the full 1TB capacity. This process failed and, after googling the problem, I verified and repaired the volume (using Disk Utility).
Following verification the harddrive still contains all of my backups and some other folders but also contains a Lost+Found folder with 23061 items in it (each a dir_# folder containing files e.g. keyedobjects.nib. This feels bad!
I googled Lost+Found and understand that these are orphaned files. Feels really bad now.
What would you advise I do now? Is there, perhaps, a way of reuniting the orphaned files with their parents?
As I only verified/repaired the external HD, are these orphaned files all originating in the same HD or have they been amassed from my laptop's HD and perhaps indicate a more serious problem with the laptop itself?
I don't want to lose the files on this drive (this contains an archive of my PhD documentation, numerous projects I've been involved with, a/v documentation).
Thanks in advance for all of your time and help,
Nick

Ok, I've had a better look at OWC and you might well be right! Great prices if my conversions are correct.
Csound1, would you be willing to go beyond the call of duty and tell me whether this combination makes any sense (to my untrained eye this looks like a tasty deal, 3TB for approx $189/£112):
Enclosure: http://eshop.macsales.com/item/Newer%20Technology/MSCKIT0GB/
Bare HD: http://eshop.macsales.com/item/Toshiba/DT01ACA300/
Cheers,
Nick

Backups log dosent show in db12

Hi
We are running SAP on DB2 on z/OS. We are unable to see the Backup logs in DB12 and getting the following error message.
Backup analysis has never been performed
Message no. SDB2U000
When I ran the New Analysis, I am getting the message " Processing cancelled by user Message no. D3212"
I can see the backup history from dbacockpit.
Please Suggest what needs to be done to resolve this issue.
Regards,
Mahesh Shetty

Hi,
Have you referred this [SAP Note 1425941 - DB2-z/OS:CCMS: DB12: New analysis not possible|https://service.sap.com/sap/support/notes/1425941]. If its possible apply the note correction.
Regards,
Bhavik G. Shroff

Backup log location

Can anyone tell me where to find the equivalent of "backup.log" in server 2008. I cannot find anything obvious on disk. I want to find the information that you see in the GUI regarding success / failure. We have an application for Server 2003 that looks through date time stamps and 'signatures' / sizes of these backup logs to work out if backups have completed correctly. I would like to duplicate this in 2008.
Also, another backup question, if you have Exchange 2007 server on Server 2008, when a full block level backup runs I have read (not on MS site) that Exchange will be backed up and its logs trimmed "correctly" by the VSS writer. So if you were to do a full server restore of that server following a hardware failure the Exchange installation would be correctly restored and the database / logs correctly in sync. Can anyone confirm this.
Thanks
Nigel

Hi Nigel,
I read your post about exporting the windows backup log with wevtutil and tried this but I get a very hard to read output file if I enter the command:
wevtutil epl c:\Windows\System32\winevt\Logs\Microsoft-Windows-Backup.evtx C:\Users\Public\Documents\Scripts\backup-log.txt /lf:true /ow:true
Here is an example:
ElfFile                Ó       €
ò÷Ý
ElfChnk                               €    ¾ Àß ·áö
   tA            ó è              . =
Î                                          ÷
À          › f              ? ø
m          ©      M F º
&                      ß
»3
** ˜0        Ÿ¿_`ÖÄÌ êßb&      êßb½€éOp¦DkZ ¤ A ˜ M      º E v e n t   ‡   j
¼ x m l n s   5 h t t p : / / s c h e m a s . m i c r o s o f t . c o m / w i n / 2 0 0 4 / 0 8 / e v e n t s / e v e n t ÿÿè ø      oT S y s t e m   AÿÿY
ñ{ P r o v i d e r   6   F=      K• N a m e   X      ) G u i d   A M   z      õa E v e n t I D   '
› X )Ú
Q u a l i f i e r s   "   Î      V e r s i o n      ÷      dÎ L e v e l
E{ T a s k        ?      ® O p c o d e   $   f      jÏ K e y w o r d s   AÿÿP   ‘
;Ž T i m e C r e a t e d   '   º j <{
I also tried the /f:text format but no difference.
Did you get the output in an easier to read format?
I am asking because I sometimes get "Warning: The backup operation that started at ... has encountered errors." on our SBS2010 but no info which files were not readable or the cause of the errors.

SSL ERROR : The required certificate was not found

I am using Adobe Javascript this.submitForm to submit FDF. This works fine in Windows. When the same pdf is opened in a Linux environment I get the following error:
SSL ERROR : The required certificate was not found
and am required to run acroread -installCertificate.
This I do and it succeeds but the SSL error persists.
The this.submitForm command is given below:
/this.submitForm({cURL: 'https://some-webpath/FILE.cgi#FDF',bFDF: true,bGet: false});
When reading the documentation for the submitForm I see that the Acrobat Web Capture plug-in should be installed: I notice this is the case in Windows but not in Linux. Where can I get this?

Hi Ben,
The behavior you have noticed with the newly installed certificate files in
[home-folder]/.adobe/Acrobat/[version]/Cert folder
and the
[install-folder]/Adobe/Reader8/Reader/Cert/curl-ca-bundle.crt file is correct. Further, the behavior has not changed between Reader versions 8.x and 9.x
It is possible that the problem may be of the installed certificate not linking up to one of the Root CA-s. An Intermedia-CA certificate may be needed to be installed.
Could you mail me at " sanath at adobe dot com ", if possible, with more information about the problem (the PDF, the certificate in question - the file named like 123456.0 ), so that we at Adobe can work on resolving your problem
Regards
Sandip

Schema Expdp-IMPdp , i have the below errors in my imp log

Hello All,
I am doing some exp/imp of schemas in a OBI environment and size around 300GB of each shema, after quiet a long time.., and not sure of the imp log errors whether to ignore or rerun my import with any changes or drop schemas and reimport ......
My IMP statement is
impdp system/********@OBIDEV schemas=ODS,DWH,STG,GEOGRAPHY directory=dumpdir dumpfile=BI2011_SCHEMAS.dmp logfile=impBI2011_SCHEMAS.log
Errors from the imp log :
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"GEOGRAPHY" already exists
ORA-31684: Object type USER:"DWH" already exists
ORA-31684: Object type USER:"STG" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01919: role 'ROLE_SRC' does not exist
Failing sql is:
GRANT "ROLE_SRC" TO "STG" WITH ADMIN OPTION
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01919: role 'ROLE_STG' does not exist
Failing sql is:
GRANT "ROLE_STG" TO "ODS" WITH ADMIN OPTION
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
a
--- and after some lines again the below errors, many failing sql's to created the tables ..
ORA-39083: Object type TABLE:"STG"."STG_ART_STOCK_OIG_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
Failing sql is:
CREATE TABLE "STG"."STG_ART_STOCK_OIG_XT" ("YEARWEEK" NUMBER, "ARTICLE_NUMBER" NUMBER, "BU_CODE" NUMBER, "ART_QTY_STOCK" NUMBER, "PM_CODE" VARCHAR2(10 BYTE)) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BI_SRC_FILES" ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE CHARACTERSET WE8MSWIN1252 STRING SIZES ARE IN BYTES BADFILE 'ART_STOCK_OIG.bad'
ORA-39083: Object type TABLE:"STG"."STG_ART_STOCK_INGKA_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
ORA-39083: Object type TABLE:"STG"."STG_ART_PMCODE_INGKA_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
Failing sql is:
CREATE TABLE "STG"."STG_IFPM_XT" ("YEAR" VARCHAR2(255 BYTE), "TERTIAL" VARCHAR2(255 BYTE), "YW" VARCHAR2(255 BYTE), "STORE_NAME" VARCHAR2(255 BYTE), "BUDGET" VARCHAR2(255 BYTE), "ACTUAL_SALES" VARCHAR2(255 BYTE), "CUSTOMERS" VARCHAR2(255 BYTE), "VISITORS" VARCHAR2(255 BYTE), "REST_SALES" VARCHAR2(255 BYTE), "EXIT_CAFE_SALES" VARCHAR2(255 BYTE), "SWE_FOOD_SALES" VARCHAR2
ORA-39083: Object type TABLE:"STG"."HFB_PA_EXT" failed to create with error:
ORA-06564: object TEMP does not exist
Failing sql is:
CREATE TABLE "STG"."HFB_PA_EXT" ("HFB_ID" NUMBER, "HFB_DESC" VARCHAR2(100 BYTE), "RA_ID" NUMBER, "RA_DESCR" VARCHAR2(100 BYTE), "PA_ID" NUMBER, "PA_DESCR" VARCHAR2(100 BYTE)) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "TEMP" ACCESS PARAMETERS ( records delimited by newline
    skip 1
    fields terminated by ','
    missing field values are null
      ) LOCAT
ORA-39151: Table "GEOGRAPHY"."CAHC" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "ODS"."ZZ_ODS_ART_STOCK_T"                  26.81 GB 321434766 rows
imported "ODS"."ODS_PM_CODE_T":"SYS_P15548"          259.4 MB 3418214 rows (are the sys tables effected here)
Then the rows started importing ....
Share all the possible ways to avoid the above all errors in the imp log as it has to be shared with the client ,    Thanks for the swif response and help in advance.
Regards,
RanG

HI,
RanG wrote:
Hello All,
I am doing some exp/imp of schemas in a OBI environment and size around 300GB of each shema, after quiet a long time.., and not sure of the imp log errors whether to ignore or rerun my import with any changes or drop schemas and reimport ......
My IMP statement is
impdp system/********@OBIDEV schemas=ODS,DWH,STG,GEOGRAPHY directory=dumpdir dumpfile=BI2011_SCHEMAS.dmp logfile=impBI2011_SCHEMAS.log
Errors from the imp log :
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"GEOGRAPHY" already exists
ORA-31684: Object type USER:"DWH" already exists
ORA-31684: Object type USER:"STG" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01919: role 'ROLE_SRC' does not exist
Failing sql is:
GRANT "ROLE_SRC" TO "STG" WITH ADMIN OPTION
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01919: role 'ROLE_STG' does not exist
Failing sql is:
GRANT "ROLE_STG" TO "ODS" WITH ADMIN OPTION
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
a
--- and after some lines again the below errors, many failing sql's to created the tables ..
ORA-39083: Object type TABLE:"STG"."STG_ART_STOCK_OIG_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
Failing sql is:
CREATE TABLE "STG"."STG_ART_STOCK_OIG_XT" ("YEARWEEK" NUMBER, "ARTICLE_NUMBER" NUMBER, "BU_CODE" NUMBER, "ART_QTY_STOCK" NUMBER, "PM_CODE" VARCHAR2(10 BYTE)) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BI_SRC_FILES" ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE CHARACTERSET WE8MSWIN1252 STRING SIZES ARE IN BYTES BADFILE 'ART_STOCK_OIG.bad'
ORA-39083: Object type TABLE:"STG"."STG_ART_STOCK_INGKA_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
ORA-39083: Object type TABLE:"STG"."STG_ART_PMCODE_INGKA_XT" failed to create with error:
ORA-06564: object BI_SRC_FILES does not exist
Failing sql is:
CREATE TABLE "STG"."STG_IFPM_XT" ("YEAR" VARCHAR2(255 BYTE), "TERTIAL" VARCHAR2(255 BYTE), "YW" VARCHAR2(255 BYTE), "STORE_NAME" VARCHAR2(255 BYTE), "BUDGET" VARCHAR2(255 BYTE), "ACTUAL_SALES" VARCHAR2(255 BYTE), "CUSTOMERS" VARCHAR2(255 BYTE), "VISITORS" VARCHAR2(255 BYTE), "REST_SALES" VARCHAR2(255 BYTE), "EXIT_CAFE_SALES" VARCHAR2(255 BYTE), "SWE_FOOD_SALES" VARCHAR2
ORA-39083: Object type TABLE:"STG"."HFB_PA_EXT" failed to create with error:
ORA-06564: object TEMP does not exist
Failing sql is:
CREATE TABLE "STG"."HFB_PA_EXT" ("HFB_ID" NUMBER, "HFB_DESC" VARCHAR2(100 BYTE), "RA_ID" NUMBER, "RA_DESCR" VARCHAR2(100 BYTE), "PA_ID" NUMBER, "PA_DESCR" VARCHAR2(100 BYTE)) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "TEMP" ACCESS PARAMETERS ( records delimited by newline
    skip 1
    fields terminated by ','
    missing field values are null
      ) LOCAT
ORA-39151: Table "GEOGRAPHY"."CAHC" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "ODS"."ZZ_ODS_ART_STOCK_T"                  26.81 GB 321434766 rows
imported "ODS"."ODS_PM_CODE_T":"SYS_P15548"          259.4 MB 3418214 rows (are the sys tables effected here)
Then the rows started importing ....
Share all the possible ways to avoid the above all errors in the imp log as it has to be shared with the client ,    Thanks for the swif response and help in advance.
Regards,
RanG
Because the table already exists. You can use the TABLE_EXISTS_ACTION option, so you can tell impdp what to do if the table it is trying to create already exists.
TABLE_EXISTS_ACTION={SKIP | APPEND | TRUNCATE | REPLACE}
impdp system/********@OBIDEV schemas=ODS,DWH,STG,GEOGRAPHY directory=dumpdir dumpfile=BI2011_SCHEMAS.dmp logfile=impBI2011_SCHEMAS.log table_exists_action=replace
Thank you

Errors reoccuring in backup log - lost+found and quota.user

Similar Messages

Maybe you are looking for