Errors RSAR 374 RSAR 375 Data Source activation

I'm trying to load a hierarchy for the InfoObject 0MATERIAL of ERP into SCM. RFC is already configured and working correctly. From Business Content objects I have copied 0MATERIAL, 0PRODH1 (to 6) and 0PROD_HIER. I then created a Source System is connected to the ERP via RFC and then execute the activation and Replication. Replication was successful, but the activation was not completed and received an error: RSAR RSAR 374 and 375.
RFC work correctly, users are also created to correct. These errors do not give the process the Transfer Rules, which displays an error when trying to change RSAR260 Transfer Rules.
Help to find the solution to activate, or tell my other options for loading hierarchies for 0MATERIAL of ERP in SCM

Hi Alexander,
You might have checked this already , if not:
Check authorization ? when asked to remote logon with administrator user, do you use administrator user ? you may need user with administrator priviledge to create source system. sometimes error message in source system creation didn't indicate authorization issue where actually it's lack of authorization. Test the rfc destination again ? and test authorization is ok ? sm59 - choose rfc destination - menu test >> test & authorization. BWREMOTE AND ALEREMOTE back ground users
Please also check SDN thread:
Urgent ......Problem........Error RSAR 374, RSAR 375
Regards
Datta

Similar Messages

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

Problem Activating Source system RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi Kishore and Edwin,
I have exactly the same problem described here, except I am creating an ECC 6 source system in BI 7.
Therefore, I am wondering if you guys can elaborate on your experience.
I get the same error message RSAR 374 and RSAR 375.
I did both connection and authorization tests for the RFC in SM59 and it's OK.
What do you mean by the "basic concept of BWREMOTE AND ALEREMOTE background users."???
Please advise.
Cheers,
SJ

Urgent ......Problem........Error RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi,
The R/3 system should be open for changes. See OSS Note #184586 - "System change option and BW". So, its description somewhat different from your situation, I got the same error while tried to create a source system until R/3 was open for changes.
Best regards,
Eugene

Data source activated in RSA5 but error in RSA3

Hi,
I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction Message no. RJ012").
Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
Thanks
Arunava

Bhanu,
Thanks again for your super fast reply. This really solved my issue.
However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
I would really really appreciate.
Thanks
Arunava

0CUSTOMER_ATTR Data source Activation Problem

Hi,
I am trying to Activate 0CUSTOMER_ATTR Data source at BW side. Its giving warnings
     'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
while Activating
     "Error when creating transfer structure /BIC/CCBB0CUSTOMER_ATTR in source system "
     "Error when activating DataSource 0CUSTOMER_ATTR "
Regards,
varun

Hi,
try to replicate the datasource and then run program RS_TRANSTRU_ACTIVATE_ALL for this infosource in SE38.
If this does not help take a look at this forum threads:
Transfer Structure Error
Error while activating Transfer structure
Error when activation transfer structure..........,
Error activating Infosource
The warning 'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
should be no problem because it is a content object.
Regards
Andreas

Error while reporting on Excel Data source

Hello OBIEE Experts,
I have created a rpd based on excel datasheet.
Record counts are updated and when I try to retrieve records on Physical layer, sometimes I can view records and sometimes the following error message is displayed:
[nQSError: 16001] ODBC error state: S0002 code: - 1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Hospital'. Make sure the object exists and that you spell its name and patha name correctly..
[nQSError: 16002] Cannot obtain nuber of columns for the query result
While creating the report on BI Answers getting the below error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0002 code: -1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Sales'. Make sure the object exists and that you spell its name and the path name correctly.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT Sales.Site saw_0, Sales."Pt# Identifier" saw_1, Sales."Q1 Charges" saw_2 FROM HosNew ORDER BY saw_0, saw_1, saw_2
Here, HosNew is the subject area name. I don't have any password for Administrator user. The Password is <blank>. Connection pool uses Call interface: ODBC 3.5
Please help in solving this.
Thanks.

hi,
Try replicating the data source again.
After that go to RSDS x-action there give the data source name and source system name and do restore and activations from there .
After check if you were able to create x-fer rules first.
Thanks
Mukesh

Error when deploying JDBC file data source for J2EE agent in weblogic

Hi ODI experts!
we're using ODI 11g and we've installed J2EE agents on weblogic. We need to configure a connection pool within weblogic for a file data source. Thus, we've added snpsFile.jar (that was shipped with ODI 10g...) to the weblogic config so that we can configure a JDBC connection to file.
As we validate the config, an error occurs (see below):
Obviously, driver is found but cannot be deployed.
####<4 août 2011 09 h 39 CEST> <Error> <Deployer> <ppdlodi001> <SRVPPDODI_001> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c53bfd6260db74bb:-485a441a:13193b42397:-7ffc-0000000000000027> <1312443551325> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1312443550020' for task 'weblogic.deploy.configChangeTask.6'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.common.ResourceException: com.sunopsis.jdbc.driver.file.a.i
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:263)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1110)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:147)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:386)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:326)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:254)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks in advance for your help.
Fredd.

Hi!
Some information: I found this website [http://gerardnico.com/doc/odi/webhelp/en/refmanual/connexion/jdbcdriversample.htm] explaining that the 'old' snpsFile.jar driver was deprecated and that a new one was existing... but I can't find it anywhere!
My questions are:
- Can the problem (original problem. See initial post) be due to driver version?
- Does someone know where to find this 'new' driver?
Thanks for your help.
Fredd.
Edited by: fredd2 on Aug 5, 2011 10:04 AM
Edited by: fredd2 on Aug 5, 2011 10:07 AM

Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D
I checked in RSA2 (data source repository in BI) and it exits.
Now that I am trying to use the generated datasource to load another MasterData Char Attributes, I get the error message u201DSource Not activeu201C, I am trying to create a transformation from 1st infoObjectu2019s export datasource to this object (both are of the same type etc)..
I am aware that we can use the program RSDS_DATASOURCE_ACTIVATE_ALL but this only works if we can see the datasource is RSDS (which I can not for this Datasource, perhaps the reason being that it is Function Module based? )
How else I could activate it? What other steps I should take or anything that can help me?   Please give your suggestions and I will say THANKS the SDN way.

I had the same problem today with an export DataSource generated on a planning area in our production SCM system.
I debugged running RSDS_DATASOURCE_ACTIVATE_ALL in our QA system for the same DataSource amd saw that the program calls function module RSDS_DATASOURCE_COLLECTION_ACT to do the activation. I ran the function module in production using the same parameters.
Our DataSource is 9A_PRG_PA for source system SCP100. I used SE37 to run function module RSDS_DATASOURCE_COLLECTION_ACT with these parameters:
I_T_OBJNM     9A_PRG_PA                     SCP100
I_WITH_CTO
I_CONTEXT     'ACTIVATE_ALL'
I_FORCE                     X
This made an active version of the DataSource appear, and I was then able to run RSDS_DATASOURCE_ACTIVATE_ALL to activate it properly.
Cheers,
Paul

Data source activation

HI Experts,
we are enhancing the data source 0CRM_SRV_PROCESS_H.After replicating the data source in bw,we are mapping the info objects with fields in transfer rules.When we are activating the transfer rules in BW it is giving the error no psa data exist for the data source.
and when we go to display data source the Active version is "does not exist".and it is not at all allowing to activate the transfer rules.
I tried RS_TRANSTRU_ACTIVE_ALLl,but it is taking long time and it is not coming.
I also go through the sap notes mentioned in the earlier posts,but does not work.
We are using 3.5.Can any one help me how to rectify this error.
Thanks in advance
sridath
Edited by: sridath on Aug 24, 2009 7:55 AM

Hi All,
we tried all the possible ways to activate the data source,but was fialed.
Now we are deleting the data source and replicating again,as it is already there in production.after transporting the new replicated data source the psa data will be lost.
in order to get the psa data how do i proceed further.
please help me..
sridath.

Error in Creation of BW data source

Hi All,
While creating a data source, i am selecting the Origin type Business ware house cube & in the RFC destination field i can able to select the BW syste. The problem is when i go to the next filed BW report and try to get the relevant BW report from F4 the system shows a log error as "System error in System" Message no. CRM_MKTTG_DS_MISC033.
In second case
I have taken an existing BW Data source and tried to recreate it manually filling all the fields with existing data source, RFC destination, BW report, Business partner and Function module.
In this case the system doesnu2019t throws any error, it is working fine if I create manually.
I am in a dilema why the system behaving like this. could you please throw some light on this issue.
Thanks in advance,
Vijay.

Hi,
See the link.
http://help.sap.com/saphelp_crm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
regards
Srinu

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Warning in data source activation in R/3

Hi experts,
While activating the data source 0salesorg_attr it shows the
following warning:
============================================
Generating DataSource 0SALESORG_ATTR
The extraction structure V_VKORG_BW of DS
0SALESORG_ATTR is a view. This allows no CustApp.
============================================
I want to replicate this datasource into bi.
Anyone please provide me the solution.
Full points will be assigned.
Thanks & Regards,
V N.

hi,
hope u might have tried to change the structure hence might said the warniing, from RSA5 select the DS then Activate/Transfer then in RSA6 do select the required filed and save.
chk the data availabilty in RSA3 and then perform replication process in BI.
Ramesh

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Errors RSAR 374 RSAR 375 Data Source activation

Similar Messages

Maybe you are looking for