Errors running JCORBA demos in OAS 4.0.7
Hello!!
I am having problem trying to run the JCORBA demo provided with OAS 4.0.7 as well as the example laid out in the tutorial that is provided in the documentation that comes with it.
This is the error I'm getting when trying to execute any of the applications:
oracle.oas.jco.ObjectFactoryException: Cannot locate Resource Manager ; nested exception org.omg.CORBA.NO_IMPLEMENT[completed=MAYBE]
Does anybody have any idea what;s going on here?
Thanks,
T.
The exact adress is ftp://oracle-
ftp.oracle.com/server/patchsets/internet/NT/oas40710/export/
Hope this helps!
Satya Pal (guest) wrote:
: Satya Pal,
: Could you please let me know exact name of the patch and exact
: location of the path. your help would be appreciated.
: Regards
: Satya
: TimToi (guest) wrote:
: : You need to apply a patch for it to work with NT SP4.
: : ftp-oracle.oracle.com
: : TimToi
: : Satya Pal (guest) wrote:
: : : Hi,
: : : I have installed Oracle Application server 4.0.7 on NT
: server
: : : 4.0 with service pack 4. OAS installed successfully . When
I
: am
: : : trying to start all options of the OWS services , it gives
: the
: : : message "waiting for ORB to be ready...." and after
sometime
: it
: : : gives the error OWS-20214 " the OAS processes can not be
: : : started, because the CORBA ORB processes can not be
: started."
: : : and services could not start any service.
: : : Could anyone have any idea about it and help me out ?
: : : Thanks
: : : Satya
null
Similar Messages
-
File Not Found Error running JSP demos
I'm not sure what is going on, but it appears that every time I try to run a jsp, the server looks in the document root where it errors out with a file not found error. I've seen others with this type of problem but I haven't seen a solution. Anyone have any ideas?
Thanks.1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change. -
Error when run sqlj demo CODE.
I am using JDeveloper 3.0 to run some SQLJ demo codes. The code come with Oracle 8i for NT.
When running these code at first, I did not have any problem. I got all the result correctly.
But after I reboot my computer in the night, and restarted it this moring, I got the error message:
Error running the example: java.sql.SQLException: profile ExprDemo_SJProfile0 not found: java.io.InvalidClassException: [Ljava.lang.Object;; Serialization incompatible with Externalization
I did see the created *.java file and *.ser files in the directory which I set as the source directory and ot path in the Project.
So I am sure tha the translator works, but why Java cannnot find the profil?
I am learn SQLJ. I appreciate any one can help me figure this out.
Pam
nullWhen you go to the download section to download a SQLJ translator, you will be sent to the JDBC/SQLJ download page.
There you can get the SQLJ 8.1.6 SDK patch which you can use to update JDeveloper 3.0 (essentially, you replace the SQLJ translator.zip file with a new version). This permits SQLJ to function under JDK 1.2.
Additionally, you need to ensure that the environment under which you compile (1.1 vs. 1.2) and under which you run correspond. - Specifically, ensure that you start JDev under 1.2 and that your project also is a 1.2 project. Otherwise all sorts of strange things appear to happen (even with the patch).
-- Ekkehard -
Error running the PL/SQL consuming web services demo
I downloaded and installed the PL/SQL code from:
http://technet.oracle.com/tech/webservices/htdocs/samples/dbwebservice/DBWebServices_PLSQL.html
on Oracle 9i version 2 (on both Windows and Solaris) which can be used to consume simple web services. However, I got the following error running the local time demo:
select time_service.GET_LOCAL_TIME('19104') from dualORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at "XN.DEMO_SOAP", line 84
ORA-06512: at "XN.TIME_SERVICE", line 13
It appears to occur upon doing this:
resp.doc.getstringval()
It seems to mean eith resp or resp.doc is null. BTW, the following:
select utl_http.request('www.oracle.com') from dual
works fine, so does the web service URL. Please
help me get this work!
Thanks a lot!I downloaded and installed the PL/SQL code from:
http://technet.oracle.com/tech/webservices/htdocs/samples/dbwebservice/DBWebServices_PLSQL.html
on Oracle 9i version 2 (on both Windows and Solaris) which can be used to consume simple web services. However, I got the following error running the local time demo:
select time_service.GET_LOCAL_TIME('19104') from dualORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at "XN.DEMO_SOAP", line 84
ORA-06512: at "XN.TIME_SERVICE", line 13
It appears to occur upon doing this:
resp.doc.getstringval()
It seems to mean eith resp or resp.doc is null. BTW, the following:
select utl_http.request('www.oracle.com') from dual
works fine, so does the web service URL. Please
help me get this work!
Thanks a lot! -
Error running demo PL/SQL consuming web services
I downloaded and installed the code from:
http://technet.oracle.com/tech/webservices/htdocs/samples/dbwebservice/DBWebServices_PLSQL.html
on Oracle 9i version 2 (on both Windows and Solaris).
But I got the following error running the local time
demo:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at "XN.DEMO_SOAP", line 72
ORA-06512: at "XN.TIME_SERVICE", line 13
ORA-06512: at line 2
The error occurs on this line:
http_req := utl_http.begin_request(url, 'POST','HTTP/1.0');
Can anybody tell me what I do wrong? Thanks a lot!
Also, is there any alternative ways to consume web services
using PL/SQL only? Many thanks!
Henry X.Mike,
Thanks so much for your help. I tried your code just now.
Same error:
ORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at "XN.DEMO_SOAP", line 50
ORA-06512: at "XN.DEMO_SOAP", line 83
ORA-06512: at "XN.TIME_SERVICE", line 27
ORA-06512: at line 7
Let me post the code I am using. Note that
I removed the code for using proxy in time_service.
Henry
-- code for calling the time_service
DECLARE
ZIPCODE VARCHAR2(200);
v_Return VARCHAR2(200);
BEGIN
ZIPCODE := '94065';
v_Return := TIME_SERVICE.GET_LOCAL_TIME(ZIPCODE => ZIPCODE);
DBMS_OUTPUT.PUT_LINE('v_Return = ' || v_Return);
END;
-- code for the package demo_soap
CREATE OR REPLACE PACKAGE demo_soap AS
TYPE request IS RECORD (
method VARCHAR2(256),
namespace VARCHAR2(256),
body VARCHAR2(32767));
TYPE response IS RECORD (
doc xmltype);
FUNCTION new_request(method IN VARCHAR2,
namespace IN VARCHAR2)
RETURN request;
PROCEDURE add_parameter(req IN OUT NOCOPY request,
name IN VARCHAR2,
type IN VARCHAR2,
value IN VARCHAR2);
FUNCTION invoke(req IN OUT NOCOPY request,
url IN VARCHAR2,
action IN VARCHAR2) RETURN response;
FUNCTION get_return_value(resp IN OUT NOCOPY response,
name IN VARCHAR2,
namespace IN VARCHAR2) RETURN VARCHAR2;
END;
CREATE OR REPLACE PACKAGE BODY demo_soap AS
FUNCTION new_request(method IN VARCHAR2,
namespace IN VARCHAR2)
RETURN request AS
req request;
BEGIN
req.method := method;
req.namespace := namespace;
RETURN req;
END;
PROCEDURE add_parameter(req IN OUT NOCOPY request,
name IN VARCHAR2,
type IN VARCHAR2,
value IN VARCHAR2) AS
BEGIN
req.body := req.body ||
'<'||name||' xsi:type="'||type||'">'||value||'</'||name||'>';
END;
PROCEDURE generate_envelope(req IN OUT NOCOPY request,
env IN OUT NOCOPY VARCHAR2) AS
BEGIN
env := '<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body><'||req.method||' '||req.namespace||'
SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'||
req.body||'</'||req.method||'></SOAP-ENV:Body></SOAP-ENV:Envelope>';
END;
PROCEDURE show_envelope(env IN VARCHAR2) AS
i pls_integer;
len pls_integer;
BEGIN
i := 1; len := length(env);
WHILE (i <= len) LOOP
dbms_output.put_line(substr(env, i, 60));
i := i + 60;
END LOOP;
END;
PROCEDURE check_fault(resp IN OUT NOCOPY response) AS
fault_node xmltype;
fault_code VARCHAR2(256);
fault_string VARCHAR2(32767);
BEGIN
fault_node := resp.doc.extract('/soap:Fault',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/');
IF (fault_node IS NOT NULL) THEN
fault_code := fault_node.extract('/soap:Fault/faultcode/child::text()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/').getstringval();
fault_string := fault_node.extract('/soap:Fault/faultstring/child::text()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/').getstringval();
raise_application_error(-20000, fault_code || ' - ' || fault_string);
END IF;
END;
FUNCTION invoke(req IN OUT NOCOPY request,
url IN VARCHAR2,
action IN VARCHAR2) RETURN response AS
env VARCHAR2(32767);
http_req utl_http.req;
http_resp utl_http.resp;
resp response;
BEGIN
generate_envelope(req, env);
-- show_envelope(env);
http_req := utl_http.begin_request(url, 'POST','HTTP/1.0');
utl_http.set_header(http_req, 'Content-Type', 'text/xml');
utl_http.set_header(http_req, 'Content-Length', length(env));
utl_http.set_header(http_req, 'SOAPAction', action);
utl_http.write_text(http_req, env);
http_resp := utl_http.get_response(http_req);
utl_http.read_text(http_resp, env);
utl_http.end_response(http_resp);
resp.doc := xmltype.createxml(env);
resp.doc := resp.doc.extract('/soap:Envelope/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"');
-- show_envelope(resp.doc.getstringval());
check_fault(resp);
RETURN resp;
END;
FUNCTION get_return_value(resp IN OUT NOCOPY response,
name IN VARCHAR2,
namespace IN VARCHAR2) RETURN VARCHAR2 AS
BEGIN
RETURN resp.doc.extract('//'||name||'/child::text()',
namespace).getstringval();
END;
END;
-- code for the package time_service
CREATE OR REPLACE PACKAGE time_service AS
FUNCTION get_local_time(zipcode IN VARCHAR2) RETURN VARCHAR2;
END;
CREATE OR REPLACE PACKAGE BODY time_service AS
-- Location of Web service definition
-- http://www.alethea.net/webservices/LocalTime.asmx?WSDL
FUNCTION get_local_time(zipcode IN VARCHAR2) RETURN VARCHAR2 IS
req demo_soap.request;
resp demo_soap.response;
BEGIN
req := demo_soap.new_request('LocalTimeByZipCode',
'xmlns="http://www.alethea.net/webservices/"');
demo_soap.add_parameter(req, 'ZipCode', 'xsd:string', zipcode);
resp := demo_soap.invoke(req,
'http://www.alethea.net/webservices/LocalTime.asmx',
'http://www.alethea.net/webservices/LocalTimeByZipCode');
RETURN demo_soap.get_return_value(resp, 'LocalTimeByZipCodeResult',
'xmlns="http://www.alethea.net/webservices/"');
END;
END; -
Error 201 when trying to run the demos !! HELP !!
Hello, we are just trying to run the demos provided in the ZIP file that comes with the XDK version for Solaris 9i and we are having problems apparently with the encoding thing.
I dont really have a clue how to make it run or provide the right encoding parameter. I have attempted to use every single parameter, UTF-8, ISO, ASCII, etc
anyone had this problem at the very beginning?? or know how to solve it?? we r just beginner trying a start jump in XML and all this parser matter.
thanks a lot. Verde.Please refer to:
http://technet.oracle.com:89/ubb/Forum11/HTML/004973.html -
Running the demos problem...
Hi guys!
I'm a newbee in the Mapviewer forum and unfortunately I've a problem with running the mvdemo demos. I've ofc dployed mapviewer in the OC4J, imported the dmp file into scott schema, configured the mapviewer data source...but everytime I'd like to run a demo i receive the unpleasant warning = "No base map MV_DEMO.DEMO_MAP found...". I don't really know where to seek for the solution, because the Mapbuilder is able to see these Base Map ;/ Please help...
With regards,
PsmakRSimilar problem here. I'm running: Windoze Server 2003 , Ver1033p5_B080908, OAS 10.1.3.1. The sever is a static IP. My admin console can't see my cached maps. I can see them in mapbuilder fine so I know the database is up. I know the user_sdo_cached_maps is configured, the data is there and the schema is set up. I have the datasource configured in my mapViewerConfig.xml and I have tried to manually create a datasource.
When I do it manually I get ...
...so I log in to OAS and do a good faith restart of mapviewer so I can test it one more time and fill in the error message, which was MAPVIEWER 0000011 or something, and boom there are my tile layers.
I have no idea what I did. I swear I've restarted mapviewer several times during this process and have no idea why now my tiles are there.
This morning I changed my logging level and did a save & restart option from the mapviewer console but only when I bounced the application server did these finally show up.
One thing that did happen to me during set up was my default tilecache path didn't exist. Perhaps that was the problem? I doubt just turning on loging would "fix" anything. Is restarting the application container for mapserver different than "save & restart" from the mapviewer management console?
Anyhow I'm happy to have tiled maps working :) -
Error running simple applications.
Hi all,
I have just downloaded CDC PP on my fedora core 2 linux machine.
I have tried to compile the demo applications by "builddemo"
and when i run the demos by "rundemo", I get the following error.
Have i forgotten to set the classpath somewhere?
Nalini
java.lang.UnsupportedClassVersionError: PPDemoFrame (Unsupported major.minor version 49.0)
at sun.misc.Launcher$AppClassLoader.findContainer(Ljava/lang/String;)Lsun/misc/Launcher$ClassContainer;(Native Method)
at sun.misc.Launcher$AppClassLoader.access$400(Lsun/misc/Launcher$AppClassLoader;Ljava/lang/String;)Lsun/misc/Launcher$ClassContainer;(Unknown Source)
at sun.misc.Launcher$4.run()Ljava/lang/Object;(Unknown Source)
at java.security.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;(Unknown Source)I think, that you have compiled you classes with
Jdk1.4+.
To eliminate the problem you can use:
javac -target 1.3 -source 1.3 .....I compiled it with Jdk1.4.x and there's no problem with that. it ran well, I think it's true that the problem is in the classpath. -
WUC-18 when trying to run webutil demo form
We set up Oracle Webutil, but are getting this java console output when trying to run the demo form:
Oracle JInitiator: Version 1.3.1.13
Using JRE version 1.3.1.13-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\me
Proxy Configuration: Manual Configuration
Proxy: 1.1.1.1
Proxy Overrides:
JAR cache enabled
Location: C:\Documents and Settings\me\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://mymachine:8888/forms90/webutil/webutil.jar from JAR cache
Loading http://mymachine:8888/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://mymachine:8888/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 902122
2004-Feb-20 17:42:42.734 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.750 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.765 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.781 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.796 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.875 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.875 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.890 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:44.109 WUI[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.ffisamp.dll
2004-Feb-20 17:42:44.500 WUI[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2004-Feb-20 17:42:44.500 WUI[loadSettings()] Local properties file loaded
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
read metalink note 252600.1 and implemented the changes mentioned there. Also walked through the configuration files, see no error there.
Regards
AndreasI take it a simple webutil form with something like CLIENT_GET_FILE_NAME works ok?
If so, then maybe its worth doing a Ctr Shift K and recompile the demo ad try again.
Regards
Grant Ronald
Forms Product Management -
Running AOS demo problems. Please help...
I have installed OAS 4 on my win nt 4.0 with iexplore 4 (5 won't
work by the way) and install the demo applications, but when I
run it, it does not output anything from the Oracle database.
Is there any bug that I should know, or any cartrix that I have
to add before running the demo? Thanks for any help.
nullIE4.0 does not support XML as it is. You'll need to add XML Parser to IE4.0. It was available from MS site.
I have IE5.0 working with NT4.0 SP5 and with OAS4.0 so it does work.
If you're trying to use XSQL servlet, IIS4.0 does not support JDBC. You'll need to add some software like JRUN.
null -
How run SQLJ DEMO code on JDeveloper 3.0?
I have problem runing the DEMO SQLJ codes. The codes come with the Oracle 8i for NT. I rtried to run them on Jdeveloper3.0 using JDK1.2.
I opened an empty project, and set the source path, out directory, and html path to oracle8i/sqlj/demo, which is the directory of all the demo codes. I also added the SQLJRUNTIME libraries to this project.
After I opened the SQLJ file into the project, I could run the file. I could also see that all the *.java, *.class, and *.ser files were created in the same directory. I assume that the SQLJ translator works. However, I got this error message instead of the results:
Error running the example: java.sql.SQLException: profile ExprDemo_SJProfile0 not found: java.io.InvalidClassException: [Ljava.lang.Object;; Serialization incompatible with Externalization
I am learning sqlj and JDeveloper. I appreciate any help.
Thanks.
PamPam,
(from the Release notes)
Using SQLJ under JDK 1.2
The 8.1.5 SQLJ version distributed with this release of JDeveloper only supports JDK 1.1.X, it does not run under JDK 1.2. A future version of SQLJ will support JDK 1.2.
There are some more useful tips in the release notes. I'd recommend checking them out.
Also, as an FYI: The 8.1.5 JDBC and SQLJ samples can also be found under <jdev>/jdbc/samples and <jdev>/sqlj/demo respectively.
Regards,
Arun -
X crash/exit: fullscreen YouTube, run xscreensaver-demo, armagetronad
X immediately crashes and exits whenever I try fullscreening a YouTube video, running xscreensaver-demo or the game armagetronad.
Hardware:
Integrated Graphics Chipset: Intel(R) 845G
Driver:
xf86-video-intel-2.12.0-1
Could someone help me troubleshoot?The thing is, my computer is a Dell Dimension 2400 with a Pentium4 2.66GHz and 1278724 kB of RAM. I have a triple boot set up with XP, Archlinux and Ubuntu Lucid on it and I have no problems running YouTube in fullscreen or running xscreensaver-demo or playing Armagetronad in Ubuntu and have no problems in XP either, so it's definitely not a hardware issue.
Here is an excerpt of Xorg messages every time I xinit.
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.34-ARCH i686
Current Operating System: Linux <host> 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 16:22:18 UTC 2010 i686
Build Date: 21 June 2010 11:54:27AM
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 13 13:27:43 2010
(==) Using config directory: "/etc/X11/xorg.conf.d"
xmodmap: unable to open file '/home/<user>/.Xmodmap' for reading
xmodmap: 1 error encountered, aborting.
Logging to: /home/<user>/.fluxbox/log
intel_bufmgr_gem.c:1088: Error setting domain 2: Input/output error
(EE) intel(0): Detected a hung GPU, disabling acceleration. -
Error running 9i reports from forms.
Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
v_rptstatus := report_object_status(v_rjob);
message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
/*display report in browser*/
-- web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
-- substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank -
Error run time DYNPRO_FIELD_CONVERSION
I have a dump:
Errore run-time DYNPRO_FIELD_CONVERSION
Verific. il 28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMM06B"
Screen number............ 0106
Screen field............. "EBAN-MENGE"
Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010 *eject
000020 *----
000030 * Positionstyp aufbereiten *
000040 *----
000050 MODULE RM06B-EPSTP OUTPUT.
000060
000070 CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080 EXPORTING
000090 PSTYP = EBAN-PSTYP
000100 IMPORTING
000110 EPSTP = RM06B-EPSTP
000120 PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
Programma
Include Riga
Classe
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
Variabili selezionate
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
DIEN DIEN
4444
495E
EBAN-PSTYP 0
3
0
LIM LIM
4442
C9D0
RM06B-EPSTP
2
0
POTE TXP
5552
4800
T163Y-PTEXT Standard
57666676222222222222
341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low = 0xfffffffffffa920
=> Stack high = 0xffffffffffff910
=> Stack Trace:
AixStack() at 0x1000206bc
CTrcStack2() at 0x1000207b4
rabax_CStackSave__Fv() at 0x1001520d4
ab_rabax() at 0x10014ef04
dyHandleError() at 0x1005a6850
dypcnvoXt() at 0x100cbd6cc
dynplend() at 0x1010cf268
dynpmcal() at 0x1010c6f60
dynppbo0() at 0x1010c5134
dynprctl() at 0x1010ce40c
dynpen00() at 0x100bd0c30
Thdynpen00() at 0x1000a1f7c
TskhLoop() at 0x1000a5298
tskhstart() at 0x1000bb0d8
DpMain() at 0x101579ca0
nlsui_main() at 0x10154d428
__start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST |00000000000x010000000000000000
EBAN |300001100895000010NB B NB 1 Elena Varett20071
*EBAN | 00000 00000
EBKN | 0000000 00000000 000000x0C
AEBAN |3000011008950NB BBEUR |
EBANW |300001100895000010NB B NB 1 Elena Varett20071
RM06B | 00000000000000000010 00
*RM06B | 00000000000000000000 00
RM06E | 000000000000000 00000000 00000
TPRG |300IW2Formato settimana Sett. |
T001W |3006 PIATTAFORMA DI LEINI' 6 CEDI6 0000000
T023 |
T024 |
T160 |300ME52 VB B |
T160V |300C1XX A XX X X |
T161 |300BNB 000100102NBB NB 00000
T161T |300INB BRichiesta d'acquisto|
T168 |300B AB *** 1 106 0x0C0x0C0x0C0x0C|
T168F |300B AB XXX |
T168T |300IB0106002 |
TTXID |EBAN B04 X
T163K | |
T163Y | Standard |
T001L |
T160D | XXXXXXXXXXXXXXXXXXXXXX
T161E | |
SAPFMMEX
TMED |300BB |
SAPLMEXF
T161 |300BNB 000100102NBB NB 00000
T162 |300PT0B ...................................
SAPLSUU1
USR02 |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS |300CONSULENTI
SAPLSWOR
TOJTB |BUS2105 XI RBUS2105
SWOTLV |BUS2105 EXISTENCECHECK M
TOJTD | |
SAPLBDLS
T000 |300Mandante produzione Arenzano EUR
SAPMM06B
*RM06E | 000000000000000 00000000 00000
MARA | 00000000 00000000
T006 | 00 00000000000000x0C 0
SAPLVDAT
TPRG |300IW2Formato settimana Sett. |
SAPLOMCV
TMCNV |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST 20010612125650 00002404
EBAN 20061113111959 00000892
*EBAN 20061113111959 00000892
EBKN 00000421
AEBAN 20000323224119 00000027
EBANW 00000896
RM06B 20000323224119 00000529
*RM06B 20000323224119 00000529
RM06E 20020124202505 00001154
TPRG 20000323231030 00000032
T001W 20040617141548 00000338
T023 20040616131428 00000102
T024 20040616131429 00000352
T160 00000035
T160V 00000050
T161 20040616131435 00000095
T161T 00000029
T168 00000035
T168F 00000044
T168T 00000013
TTXID 00000058
T163K 20000323230840 00000023
T163Y 00000026
T001L 20000323230832 00000069
T160D 00000069
T161E 20000323230840 00000025
SAPFMMEX
TMED 00000010
SAPLMEXF
T161 00000095
T162 00000234
SAPLSUU1
USR02 00000226
USREFUS 00000067
SAPLSWOR
TOJTB 00000453
SWOTLV 00000701
TOJTD 00000033
SAPLBDLS
T000 00000107
SAPMM06B
*RM06E 20020124202505 00001154
MARA 20071118093457 00001118
T006 20001109142345 00000080
SAPLVDAT
TPRG 00000032
SAPLOMCV
TMCNV 00000062
Blocchi di contr. CONT ABAP
Include Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND 25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND 27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND 31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP 7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02 0336
2511 FUNC 10
2512 PAR2 01 03B9
2514 PAR2 01 03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP 14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ 6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ 7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ 8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ 9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank youHello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar -
"Error running javac.exe compiler" when using ant to compile Eclipse plugin
Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target
<!-- ===================================================================
Compile specified plugin
target parameters:
param.plugin.dir: the plugin directory
param.plugin.targetJarFile: the name of jar file for the given plugin
param.plugin.src.dir: the folder name of source codes. Note: it is relative path name
param.fork: indicate if another process is forked to run javac
=================================================================== -->
<target name="compilePlugin">
<!-- Prepare compile environment -->
<!-- Delete obsolete build folder -->
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
<!-- Delete obsolete jar file -->
<delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
<mkdir dir="${param.plugin.dir}/${build.dir}"/>
<!-- Compile source codes -->
<javac srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
destdir="${param.plugin.dir}/${build.dir}"
failonerror="${javacFailOnError}"
verbose="${javacVerbose}"
debug="${javacDebugInfo}"
deprecation="${javacDeprecation}"
optimize="${javacOptimize}"
source="${javacSource}"
target="${javacTarget}"
fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
<classpath refid="compile.classpath" />
</javac>
<!-- Create plugin jar file -->
<copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
<fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
</copy>
<jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
OceanmanI encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps.
Maybe you are looking for
-
Problem with multiple threads accessing the same Image
I'm trying to draw into one Image from multiple threads. It works fine for a while, but then suddenly, the image stops updating. Threads are still running but the image won't update. I'm using doublebuffering and threads are simply drawing counters i
-
Alternate soundcard [graphics adapter, not SOUND card]
My budget has very quickly become limited with what I want to purchase for my new system and I am looking at a different setup for use with my CC suite. Does anyone now why an Intel graphics card (HD4000) wouldn't work for running Pr, Ae, Ph, Lr, etc
-
Bug: Jdeveloper 10.1.3.2.0 !!
I am not sure if it is a bug or not, but my jdeveloper 10.1.3.2.0 did like this: http://blogs.oracle.com/Didier/2006/11/22 can anyone explain the matter? Bassam
-
How do I import home DVD's into my iMOVIE?
-
Relationship between XML Forms
Hello, I have 3 XML Forms, Macro Process, Process and SubProcess. The 3 xml Forms must have a sequential id (like a tree structure). For example: I created a Macro Process with Id=1, when I created a Process I have to associate this Process with a Ma