Errors trying to use time machine backup

I continue to have failures to use my Time Capsule HD (1 TB) as a backup disk; cites error 60.
I've tried various encryption/login/security measures and it fails with the same response. There must be something more basic that I am overlooking?
Any clues or breadcrumbs would be most appreciated.
-iRonic

If you are running the latest firmware, let me suggest you go back to 7.5.2 .. on a Gen 3 you might find it much more reliable.
Hold down the option key when you select firmware update and the full selection forward and back should present. Choose the 7.5 version.
Make sure you use names that are SMB compatible.. short, no spaces, pure alphanumeric.
For TC network name, Wireless and Hard disk name.

Similar Messages

  • HT4848 iMac crashed, trying to use Time Machine backup. In Restore From:it only offers Macintosh HD on ..... (grayed). There are backups listed below.

    iMac crashed, trying to use Time Machine backup. In Restore From:it only offers Macintosh HD on ..... (grayed). There are backups listed below. When I click on a current backup and click on continue I get a "Select a Destination" with Searching for disk, but nothing comes up.
    I am connected to my Passport if that helps, but I think that is where it is getting the backup list.
    Any help on how to proceed?
    Thanks,

    Thanks for your help on this. I was trying to restore from a new drive. The problem I have is that Time Machine will not let me do so, so far. 
    When I go into 'Restore from Time Machine Back up) I can access the Time Machine HD ok. But then when I go onto next page (Select a Back Up) the 'Restore From' option only has the greyed out name of my crashed HD (this seems wrong?). If I continue the process to erase starts and then stops, message says:
    An error occurred while adding a recovery system to the destination disk.
    it only seems to want me to back up to my crashed HD which I have no intention of using

  • Errors when trying to use time machine backup

    Here is the error I receive when trying to back up my computer with Time Machine.  Is there any way to fix it without completely wiping the Time Capsule and starting over?  My husband would love it if we could find a way since all of his back up information is on it too!

    Here is the error that I am encountering:
    The backup disk image “/Volumes/Data/**Name of Bundle**.sparsebundle” could not be accessed (error -1).

  • I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    Hello Drake, I suspect one or more of the Drives needs repairing, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

    I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
    The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
    -Steve

    Booting From Snow Leopard Installer Disc
    1. Insert Snow Leopard Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    Drive Preparation and Installation
    1. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

  • I'm getting an error message on my time machine backup: "The backup disk image "/Volumes/Data/MacBook.sparsebundle" is already in use." Any suggestions?

    I'm getting an error message on my time machine backup: "The backup disk image “/Volumes/Data/MacBook.sparsebundle” is already in use." Any suggestions?

    Excellent apple networking on Lion or ML is usually the issue.
    Reboot the TC.. if that don't fix it.. reboot the whole network.. modem.. router.. TC.. clients.. restart in that order.
    There are tools.. download the real tool if you have lion..
    For ML you are stuck with toyland.. AU 6.1 .. good luck with the plastic hammer.
    Read C12 and C17
    http://pondini.org/TM/Troubleshooting.html

  • My Seagate external 250GB hard drive ejects improperly without command.  I am trying to use Time Machine to backup my macbook via usb cable...  I keep getting the message that the disked ejected improperly...  Any solutions...

    My Seagate external 250GB hard drive ejects improperly without command.  I am trying to use Time Machine to backup my macbook via usb cable...  I keep getting the message that the disked ejected improperly...  Any solutions...

    You are not alone. Thousands have this problem, on various models of Macs. Short answer, it has something to do with the disk going to sleep (possibly?). You can't do anything about it and Apple won't address the problem. Maybe you should buy a time capsule. Just keep giving them money and use their proprietary equipment.
    For a more complete answer, see this thread (all 65+ pages of it with NO SOLUTION IN SIGHT... except for some 3rd party solutions that sometimes work, sometimes don't): Disk Drive ejecting itself

  • I have already used time machine backup and I last used on june 2012 . Today when I tried to backup the time machine is still stuck on preparing my backup?What shallI do?

    I have already used time machine backup and I last used on june 2012 . Today when I tried to backup the time machine is still stuck on preparing my backup?What shallI do?

    See Section C here  >  http://pondini.org/TM/Troubleshooting.html
    From Here  >   http://pondini.org

  • I just installed Mountain Lion on my iMac that was previously running Snow Leopard. Bugt I found that some key applications no longer work, so I would like to go back to snow Leopard. I can't use time machine backups for this. what can I do?

    I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.

    The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
    I don't understand how you managed to get your Time Machine backup to not backup the system.
    Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
    To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
    Allan

  • Recover OS X using Time Machine Backup

    Hi All,
    I have created time machine backup for my entire system after a clean install  of Mountain Lion on Aug. 01, 2012 to a 16 GB USB drive. Now, as per my discussions with Apple Care, they told me that using Time Machine backup I can get back into the state where I created the backup (including Mountain Lion files). This is fine with me and I know that I can only get the files back for the time I created that backup.
    Although, I don't want to restore my system now but just for being on safer side, I tried to learn the process of recovery. I followed the steps below to get into recovery mode:
    1. Press the option key while system started.
    2. Selected Recovery Mode from the available options.
    3. Selected Time Machine Backup from the recovery mode.
    Now, system displayed me the time machine backup for Aug. 01, 2012. I choose the one and click on next.
    Now, here I have a few questions:
    There was a drop down disabled on top that says "Restore From" and the option selected was "Machintosh HD on Ashish's...". What is this option? Is it telling me from where I had created the backup or it's telling me from where the system restore will take place?
    Secondly, let's say that my whole machine was corrupted due to some reason and I am not able to start OS X then do Time Machine backup also restores my OS X?
    Thank you in advance,
    Regards,
    -Ashish Sharma

    Secondly, let's say that my whole machine was corrupted due to some reason and I am not able to start OS X then do Time Machine backup also restores my OS X?
    It restores what was on the source volume when the backup took place, apart from logs, caches, the contents of the Trash, and whatever you choose to exclude. If the OS was corrupt when you backed up, it will still be corrupt after you restore.

  • How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

    How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

    Hi,
    Try Target Disk Mode
    OS X Yosemite: Transfer files between two computers using target disk mode
    There is also Migration Assistant.
    OS X Yosemite: Transfer your info from a computer or storage device

  • Recover OSX Mountain Lion using Time Machine Backup

    Hi,
    Can anyone help me to recover OSX  Mountain Lion using TIme Machine backup as i accidently corrupted the recovery HD and the Macintosh Drive?
    Regards,
    Sanil

    As Linc stated, you can boot from your Time Machine backup of OS X Mountain Lion.
    Restart your machine and hold down the Option key. Select the Time Machine backup drive to boot from. When it boots into the TM drive you will get the same OS X Utilities screen like in the recovery HD. You can use Disk Utilities to erase your Macintosh HD then restore your Mac OS X from Time Machine.

  • HT1338 Can I do a clean install after using time machine backup?

    Can I do a clean install after using time machine backup?

    Hi, if I understand correctly yes, but may I ask the purpose of doing so?

  • Errors when transferring my Time Machine backup to an external drive.

    Hello,
    I need some help transferring my Time Machine backup to an external drive. Let me explain what happened.
    I have a Mac OSX Mountain Lion that was upgraded to Mavericks when the upgrade came out. Prior to upgrading, I've been backing up  WD Passport Mac with the proprietary software "WD Unlocker on it". It worked flawlessly but after upgrading to Mavericks, I decided to backup and noticed that once i inserted the WD Passport, my screen will flicker, windows will close and reappear.
    I decided to read up on this and discovered that Mavericks is not compatible with the "WD Unlocker " program on the Passport drive. Since I already have a backup in place, i decided to restore my computer to factory settings and when I attached the Passport drive with my backup on it, My device will see the backup but it will keep spinning for hours without restoring my backup. I decided to read further on this and I got the same Mavericks compatibility conclusion.
    I then copied my entire backups.backupdb folder to my Mac desktop and formatted my WD Passport external drive and got rid of the proprietary software "WD Unlocker".. Once this was completed, I then tried to copy my backups.backupdb folder to my external drive within finder. Each time i tried, i get error messages and permission messages. Even when i changed the permission on the backups.backupdb folder to read & write for everyone, i still get the permissions error.
    Please helppppp. I have over 500gb of vital data in my backup.
    Thank you.

    Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

  • How do I use time machine backup to restore onto a different computer

    I am trying to troubleshoot the best way to back up my Mac.  I have been a mac user since 20009 and always used a time machine.  The two times I have needed it for backup, my computer did not read the portion the backup was.  You could tell under disk utility the space was used.  Just before the need of backup, it was backing up.  So, I am wondering if I  need to use a different method.  I lost all of my Christmas 2015 movies.  My computer did some weird thing with passwords and it needs some resetting I had to do with the support team on the phone.  The support person could not figure out how to access the back up on time capsule.  I noticed the password resetting made my computer name different by putting a 3 behind the name I assigned it. 
    One thought that has crossed my mind is can you use the time machine backup and open it up on a completely different computer? If so, I should have been able to someone access my information.  I would like to know the answer and how do it so I know in case this ever happens again and so that I can rely on this expensive back up machine I have purchased two different times on two different computers and never been able to actually use.

    Are you running Yosemite.. because it is the cause of loads of problems.
    As to opening the TM backup from another computer.. yes you can.
    Please read our TM expert Pondini.
    Q14-17 on restore here.
    http://pondini.org/TM/FAQ.html
    Particularly as you will see Q17 and it will reference the prior info you need.
    I have gone through this with several people.. and I have a post showing a manual file location and restore.
    Can't access old files on time capsule
    But not from Yosemite.. it has its own bunch of bugs.. as mentioned. Good luck with those.
    I also strongly recommend people use a secondary backup method.. there are excellent third party.. I use Carbon Copy Cloner.. it is reasonable price.. $40 based on standard rsync.. and will create either bootable clones to a local drive or sparsebundle on a time capsule etc.
    The bootable clone is the ideal way to recover files. since it is based on a simple computer reboot and then access of files that are in exactly the same place as you left them.. TM backs up in a most complicated manner.
    See how tm works here. The top couple of articles and how it is different to clones. As Pondini suggests.. using both is no bad thing.
    http://pondini.org/TM/Home.html
    This is also useful for yosemite.. it is not working as TM used to.
    Find files in Yosemite.
    https://discussions.apple.com/thread/6681850?searchText=time%20machine%20yosemit e#27139370
    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
    I am not sure why your previous use of TM failed.. In the midst of all its problems it does still work ok.. as mostly people can recover stuff they do.. albeit it needs a lot more messing than is typical Apple.

Maybe you are looking for