Errors when installing Premiere CC

So i get this error message when i try to install Premiere C. I ave done what the support says and deleted my InPogress registry, but it still doesnt work. Help?!
Exit Code: 34
Please see specific errors below for troubleshooting. For example,  ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Adobe CSXS Extensions 4_4.0.2_AdobeCSXSExtensions4-mul 7.0.0.108 {81036849-4B6D-4CB8-8D47-31222F3540E3}' information not found in Media_db.

you'll probably need to check your install logs to find the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
or, if that's your only cc program, uninstall it, run the cleaner (http://www.adobe.com/support/contact/cscleanertool.html), restart your computer and reinstall.

Similar Messages

  • Msiexec error when installing Premiere Elements

    I had a very disappointing time with support and still cannot install my new copy of PS Premiere Elements.
    I downloaded the softare. Installed the PS Elements. It was smooth.
    I then tried to install Premiere Elements and it does not work.
    When I started the .exe it asked for a place to extract files. I did this. Then it tried to install. But after a while I get this box with the msiexec commands listed in it. Eg.
    Windows ® Installer. V 3.01.4001.5512
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
                    </package | /i> <Product.msi>
                                    Installs or configures a product
                    /a <Product.msi>
                                    Administrative install - Installs a product on the network
                    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
                                    Advertises a product - m to all users, u to current user
                    </uninstall | /x> <Product.msi | ProductCode>
                                    Uninstalls the product
    Etc etc etc.
    And then finished with an error that it was not installed.
    I then manually clicked on setup.exe I then got a screen asking for language, but then I get a windows showing again options for using msiexec command.
    When I try using the Adobe Premiere Elements 10.msi then i get an error
    Adobe Premiere Elements 10 - Setup
    Install Adobe Premiere Elements 10 using the setup.exe in the root folder.
    I called support. They had me extract files into a folder off of  eg C:\PS
    I did this. Started the setup.exe, Same error as above msiexec.
    He then had me install it with the runas administrator. I tried same error.
    He then told me to create a new account on the computer with admin privileges. I didn’t really like this, but  I did this . And restarted the setup but still same msexec error.
    The support person said it was an admin error. Sadly I think he is wrong, he just read the message and quickly gave the first thing he could think of. I asked him why he felt that, and he said based on the error. However sadly I don’t believe he is understanding the “error” He saw the words  “Administrative install - Installs a product on the network” (see above) and quickly said oh its an admin problem. I didn’t realize at the time that this is not really an error message regarding the administrator, but just the output of a badly formed command, with a default output of a badly formed command.
    Let me explain..
    What I believe is that somehow the script that is running the install is trying to run the msexec program and the output is simply the output of the msexec program when the parameters are not right. In fact if you open a dos prompt and type msiexec you get the exact same output. The error is not really an error but just the output like any other of a command with no perimeters. Like if you type defrag or copy from the command prompt with out the right parameters. The command gives a response. For some reason the support person saw the word “administrator” and quickly jumped to the conclusion oh its an administrator issue that was the error. The support person kept asking me if that was all and was definitely trying to get rid of me. It quite frankly was very disappointing that he didn’t know this how to resolve the issue and just wanted me to go away.
    Can anyone tell me how to install this program. I am on a domain and have both domain and local passwords. Im using windows XP.
    By the way I tried using
    ok, i fnally was able to extract the files, enter serial numbers, and run the program, I'm testing the program now
    the problem is adobe's fault, a faulty script or something on the dvd.
    in my situation, to get this program installed, i decided to do the following:
    1) optional: copy the install dvd to hard drive.
    2) locate the adobe premiere elements 10.msi file.
    3) type in    msiexec /a "adobe premiere elements 10.msi" /qb TARGETDIR="C:\tempfolder"
    to unpacked the msi archive. 
    4) go into the c:\tempfolder/programfiles/Adobe
    5) optional: copy or move the Adobe Premiere Elements 10 folder into your c:\Program Files\Adobe  folder so it sits with the rest of your adobe programs
    6) you have to make your own desktop icon
    7) when you go into the premiere elements folder click on Adobe Premiere Elements.exe to start the program
    8) it may tell you to download the Adobe Application Manager from http://www.adobe.com/go/applicationmanager
    so download it if necessary.  the ApplicationManager2.0_all.exe file will silently install.
    this does work HOWEVER, it doesnt really install it with all the registry etc. and doesnt integrate it into the PSE. So I dont think this is really the right option.
    Oviously it should install properly. (thanks anyway)

    Thanks Jeff for helping.
    The version of the install software is definetely 32 bit. eg its PremiereElements_10_LS15_win32.exe with the corresponding win32 zipped file.
    BTW the fact that I can extract the files and then run the program as a stand alone program means I think? that it is the right version and can run on this computer. Its obviously an install issue it seems.
    The version of XP i have is XP prof sp3 version 5.1 build 2600.xpsp_sp3_gdr.101209-1647
    Based on your comment regarding the install version, I found and downloaded the 4.5 version of the msiexec software. Tried to install the PE again and got the same error ... EXCEPT that now the output comes from the 4.5 version instead of the previous version. eg.
    Windows ® Installer. V 4.5.6001.22159
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
    </package | /i> <Product.msi>
      Installs or configures a product
    /a <Product.msi>
      Administrative install - Installs a product on the network
    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
      Advertises a product - m to all users, u to current user
    </uninstall | /x> <Product.msi | ProductCode>
      Uninstalls the product
    etc etc.
    So obvously the new installer got installed, but still the install process doenst work.
    Any further ideas.

  • Errors when installing Premiere Pro

    When I installed Premiere Pro all these error messages come up and it says installation failed. Adobe encoder will not open and Adobe Encore will not transcode. I am using a windows vista computer. Can Some one please help. thanks joey
    Adobe Device Central CS4
    Error:
    Error 2.
    Adobe Dynamiclink Support
    Error:
    Error 2.
    Adobe Encore CS4
    Error:
    Error 2.
    Adobe Encore CS4 Codecs
    Error:
    Error 1603. Error 1402.Could not open key: UNKNOWN\Components\163E0B0F7CCE48542B03C78F29551631\CCF5A2BFB18B2C840A90874096D4389E.   Verify that you have sufficient access to that key, or contact your support personnel.
    Adobe Encore CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Encore CS4 Library
    Error:
    Error 1603. Error 1402.Could not open key: UNKNOWN\Components\B1DA4D4B28C80FF4DB94D6C430413368\4A0B590B5A057D6499880D83EF0B040C.   Verify that you have sufficient access to that key, or contact your support personnel.
    Adobe Media Encoder CS4 Dolby
    Error:
    Error 2.
    Adobe Media Encoder CS4 Exporter
    Error:
    Error 2.
    Adobe Media Encoder CS4 Importer
    Error:
    Error 2.
    Adobe Output Module
    Error:
    Error 2.
    Adobe Premiere Pro CS4
    Error:
    Error 2.
    Adobe Premiere Pro CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Premiere Pro CS4 Third Party Content
    Error:
    Error 2.
    LangPack (English) for DeviceCentral
    Error:
    Error 2.
    Photoshop Camera Raw
    Error:
    Error 2.

    Ricky,
    simply find your work folder and save everything in safe place.
    If you have not changed any setting, it should be in user\your name.
    About uninstall, just launch it like you'd want to remove everything, then, when the program will ask you which application had to be removed,
    just sign premiere, mediaencore and company.
    Unfortunately for you, I'm quite agree with Harm.
    Ciao
    Giorgio

  • Error when installing premiere elements 10

    I am receiving the above error message when attempting to install Premier elements. I have seen other posts on this but no direct response. please assist.

    Hi,
    Apologies for the delay in response.
    I presume that you are trying the installation on a Mac.
    If you are still having the same issue installing Premiere elements 10, the instructions in this document will help resolve them :Cannot install Premiere Elements 10 on Mac OS.
    Thanks

  • Error when installing Premiere Elements 3 in Vista 32bit

    I am trying to install Premiere Elements 3.0 on my Vista Business 32bit computer, but I am getting an error during the installation.
    The error states "The Windows Installer Service could not be accessed."  I get this no matter what:
    -Normal install
    -Right click and Run As Administrator
    -Right click and set compatibility as XP
    -Running the PRE_302_EFGJ Vista patch yields the same error
    I have successfully installed many other pieces of software, only PE3 is giving me issues.
    Is this a known issue or could something be up with my system?
    Thanks in advance,
    Ross

    Make sure you've got the latest updates to Vista, including the option ones. You'll need to manually go to Windows Update and click the option to install all updates to do this.
    Also ensure that you have the latest Quicktime.
    http://forums.adobe.com/thread/416585?tstart=0
    Also, don't know if this will help, but...
    http://www.geekstogo.com/forum/windows-Installer-service-could-not-accessed-t93532.html
    And this may also help.
    http://kb2.adobe.com/cps/401/kb401060.html

  • When installing Premiere Elements I get an error with Shared Technologies

    When installing Premiere Elements onto a Windows XP Service Pak 3, I get an error with Shared Technologies.

    Hi,
    Thx for the reply.
    I had Bridge open in background and once I closed that Elements installed correctly.
    Thank you.

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • Getting an "installer failed to initialize" error when installing CS5 from CD

    Getting an "installer failed to initialize" error when installing CS5 from CD
    Mac OS X Version 10.7.5

    Try using the Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS5:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • Error when installing SDK on BW platform

    We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
    I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

    Hi,
    it could be that the depending extension was unpacked while installing the extension pack.
    please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
    uninstall the extension pack in your Design Studio (client side),
    go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
    if it is checked please unckeck it,
    export your extension pack to zip-file,
    install your extenion pack again on client side,
    now the jar-file should be available.
    You sholud deploy your extension on Server without any errors.
    kind regards
    Patrick

  • Error when installing SM7 "The step runMigrationMonitor with step key "

    Hi all
    Please help for the following error when installing
    ERROR 2009-06-13 00:27:13.515
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    Regards
    Kevin

    Hi Uday
    import.monitor.java.log
    Loading of 'SASACONT1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
    Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
    Loading of 'REPOSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
    Loading of 'SAPAPPL0' import package: ERROR
    Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
    Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
    Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
    Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
    Loading of 'SAPAPPL1' import package: ERROR
    Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
    Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
    Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
    Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
    Loading of 'DD03L' import package: ERROR
    Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
    Loading of 'SAPSSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
    Loading of 'STERM_TEXT' import package: ERROR
    Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
    Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
    Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
    Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
    Loading of 'SEOSUBCODF' import package: ERROR
    Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
    Loading of 'E071K' import package: ERROR
    Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
    Loading of 'SAPSDIC' import package: ERROR
    Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
    Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
    Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
    Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
    Loading of 'ATAB' import package: ERROR
    Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
    Loading of 'SAPSPROT' import package: ERROR
    Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
    Loading of 'SAPSDOCU' import package: ERROR
    Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
    Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
    Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
    Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
    Loading of 'SAPSLOAD' import package: ERROR
    Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
    Loading of 'SAPSLEXC' import package: ERROR
    Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
    Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
    Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
    Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
    Loading of 'SAPDDIM' import package: ERROR
    Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
    Loading of 'SAPDFACT' import package: ERROR
    Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
    Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
    Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
    Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
    Loading of 'SAPDODS' import package: ERROR
    Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
    Loading of 'SAP0000' import package: ERROR
    Import Monitor jobs: running 1, waiting 1, completed 4, fail
    ed 23, total 29.
    Loading of 'SAPUSER' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
    Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
    Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Maybe you are looking for