Errors when installing SGD 4.5 on Red Hat Enterprise 5

I have a customer installing SGD 4.5 on Red Hat Enterprise 5 and is getting the following errors:
/opt/tarantella/bin/tarantella: /opt/tarantella/bin/bin/ttahostname: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
The customer has indicated that they do not have a lib directory?
Any ideas would be greatly appreciated !
Thanks
Jeff Holland

Hi.
Never tried under RH5 but, to me, it's pretty strange the customer does not have a /lib folder.
Are you in the position to check if their RH5 system is correctly configured (ie, not screwed up)?
Is that a 32bit or 64bit edition?
Could you manually "inspect" the /lib folder to see if there's some contents on it?
Last, under which user account is the customer installing SSGD? Is it operating as root user?
As per the Web site, RH5 is a supported platform so you shouldn't have any problems.
Cheers,
Rob

Similar Messages

  • Installing Oracle 9i on Linux Red Hat 7.2

    I got the following error when installing Oracle 9i on Linux Red Hat 7.2:
    Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait...
    jre was not found in /tmp/OraInstall/jre/bin/../bin/i586/green_threads/jre
    Any ideas how to fix the problem?
    Thanks

    Try installing 9i on RH 7.1. I don't believe 9i runs under 7.2 due to library incompatibilities.

  • ColdFusion 10 install fails on Red Hat Enterprise Linux 5.8

    I'm trying to install ColdFusion 10 on a Red Hat Enterprise Linux 5.8 server with Apache 2.2.3. The install appears to complete with no errors. After some searching the web, I found I had to change the adobe connector shell script to use my directories instead of the bogus ones that were there. The httpd reports that the mod_jk is loaded (apachectl -M returns jk_module (shared) among other things). However, when I attempt to load a ColdFusion page, my web server says "503 Service Temporarily Unavailable". I've look in the log files for httpd and for ColdFusion and see nothing amiss, but I am new to this ColdFusion.
    It appears my Apache httpd is not communicating with the ColdFusion process, which is listening on ports:
    TCP *:8012
    TCP localhost.localdomain:8007
    TCP *:7995
    TCP *:6085
    TCP *:8575
    TCP *:1243
    Any suggestions?
    Danial for bannock21

    Here are the entries in the mod_jk.log file:
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] jk_open_socket::jk_connect.c (448): socket() failed (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1027): Failed opening socket to (127.0.0.1:8012) (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_send_request::jk_ajp_common.c (1649): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_service::jk_ajp_common.c (2629): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] jk_open_socket::jk_connect.c (448): socket() failed (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1027): Failed opening socket to (127.0.0.1:8012) (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_send_request::jk_ajp_common.c (1649): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=22)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_service::jk_ajp_common.c (2629): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_service::jk_ajp_common.c (2648): (cfusion) connecting to tomcat failed.
    [Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] jk_handler::mod_jk.c (2725): Service error=-3 for worker=cfusion
    How do I set Tomcat to listen on the correct port?
    How do I check whether Tomcat is even running?

  • Can i install the Portal Server 7 on Red Hat Enterprise Linux 4 ?

    hi all,
    Can i install Portal Server 7 on Red Hat Enterprise Linux 4 ?
    Thnx in Advance.

    Hi All,
    After tearing my hair out for about 3 weeks I've figured following are the steps for installing Sun Portal Server 7 on RH Linux 4. These though help successful installation I am still struggling to get the Single Sign On for the sample applications working.
    1. Boot linux with the network cable disconnected. (cable disconnected or wireless disabled is very important).
    2. set Hostname to localhost.localdomain
    3. Start INstaller (I always used the root login).
    4. Once the components list comes up "select All" then unselect "Sun POrtal Server 7" and "Sun Java System Portal Secure Remote Access". (trust me firends I am not kidding around).
    5. Follow steps of installation. Provide a password wherever requested. Highly suggested that you note down the options and the values you are entering in each step. Its about 20 page installer. Also whereever host and domain is asked for use localhost.localdomain. IP should be 127.0.0.1. Valid IP and valid domain name will also work but I haven't gone that route yet.
    6. Take special note of the LDAP Admin Password and LDAP user password. Note the usernames too. The admin password and user passwords HAVE to be different. DO NOT Forget the admin password. Default admin name is amAdmin.
    7. Go ahead and let the installation complete.
    8. I always used localhost.localdomain as domain name and host name and IP to loopback address 127.0.0.1
    Once the installation is complete start newly installed server in the following sequence
    A. To start localhost slapd:
    cd /var/opt/sun/directory-server/slapd-localhost/
    ./start-slapd
    cd /var/opt/sun/directory-server/
    ./start-admin
    (you can test here by running ./startconsole and loggin in using the admin username and password (you you should have remembered those... don't tell me I didn't warn you :)...)
    B. To start Sun Java System Application Server
    cd /opt/sun/appserver/bin
    ./asadmin start-domain --user [username] --passwordfile [a simple txt file with only the password in it] [domain name]
    e.g.
    ./asadmin start-domain user admin passwordfile adminpassword.txt domain1 OR
    ./asadmin start-domain user admin password pass123 domain1
    takes a few seconds to kick it off.
    open browser and go to http://localhost.localdomain:8080/ to check if application server is running
    C. To start Identity Server
    cd /opt/sun/identity/bin
    ./amserver start
    Now go to the SunPortal Server installer again and run it.
    9. In the screen that asks whether you want to install only or configure select configure now.
    10. Fill in required parameters like password. and user name. ( I kept ALL default and used the same password all throughout except for LDAP admin, I am doing this for a PoC so security be damned at the moment ).
    11. Be sure to fill in the correct LDAP admin and user passwords because else installation will fail.
    12. Let the installation roll
    13. At about 38% it will give a popup warning configuration may take upto an hour. If you get to click on this popups ok button good things are progressing fine. If not some server didn't start right.
    14. Takes about 15 minutes (depends on machine config) after you hit okay for the configuration to complete. Anything lesser check logs for any failure notices.
    15. IF all success reported congratulations!!!
    16. Goto http://localhost.localdomain:8080/portal/ to go to portal home page
    IT STILL DOESN"T WORK!!! HELP!!!
    Folks after all I said above it still doesn't work. When I go to any of the portal server Sample Applications and try to log in using the default usernames
    Community Samples has test/test
    Enterprise Sample has mary/mary ed/ed etc
    I cannot log in... The screen simply refreshes but doesn't go anywhere.
    I am suspecting this is because the domain and host is pointing to localhost.localdomain instead it should be given a valid domain name and a valid host and a valid IP instead of 127.0.0.1. If anyone can throw anymore light on this I'll be grateful.

  • How do i install firefox into my Red Hat Enterprise Linux Professional Work Station 3

    I do not know how to install firefox. To my Red Hat Enterprise Linux Professional Work Station 3.

    First make sure that you meet the System Requirements (GTK+ and GLib) for the current Firefox version.
    *http://www.mozilla.org/en-US/firefox/23.0/system-requirements/
    *http://kb.mozillazine.org/Installing_Firefox#Linux
    *https://support.mozilla.org/kb/Installing+Firefox+on+Linux

  • Java(TM) 2 SDK needed for Red Hat Enterprise 4

    Hello List members,
    I am installing open-xchange on my Red Hat Enterprise 4 box but getting error "no acceptable java compiler found - please install at least the Java(TM) 2 SDK."
    JRE is installed in my system but even after a lot of research I am unable to find Java(TM) 2 SDK . Can anyone of you tell me where to download Java(TM) 2 SDK for Red Hat Enterprise 4. Its not in the SUN site as far as I know, I could be wrong.
    Please help me.
    Regards,
    Vishal

    I installed rhe4 and i have installed a lot of jsdk1.4.2-1.50 and later no any error and not collapsed java system but it has using GNOME consol avoid running system well you will changed GTK SYS.

  • How to uninstall Oracle 11g on Red Hat Enterprise Linux 5.3 x86-64

    I've install Oracle 11g on a Red Hat Enterprise Linux 5.3 x86-64 system. I'm new to the world of Oracle and I have come to the conclusion why learning about Oracle I've screwed up my in installation of Oracle 11g to the point where nothing Oracle related is working properly. I've decided that I want to uninstall Oracle 11g and start over.
    How do I uninstall Oracle 11g on a Red Hat Enterprise Linux 5.3 x86-64?

    What do you mean with doesn't work?
    If you want to delete the database manually, then refer [to this link|http://dev-notes.com/code.php?q=40]
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Certification of OWB 10g on Red Hat Enterprise AS/ES 4?

    Hi,
    Can you tell me when OWB will be certified on Red Hat Enterprise AS/ES 4?
    Thanks
    Joel.

    Duplicate post, answer is here: Oracle 9.2 on Red Hat Enterprise Linux ES 4

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • Red errors when installing 0ABC_CLASS

    Get many red errors when installing 0ABC_CLASS, one red error is "Table /BI0/OTABC_CLASS could not be activated"
    Note: 0ABC_CLASS does not contain any attribute, that means we don't have to find other InfoObjects which are attributes of 0ABC_CLASS to install to get rid of these red errors when installing 0ABC_CLASS.
    It's activated in a just installed BW 3.5, could it be any patch reason or some other reasons?
    Everyone's input is welcome!

    hey Eugene,
    Under SM21, these are system logs for today:
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 070016 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107070016qd1sbwdb DDIC 0001 )
    Perform rollback
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 080013 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107080013qd1sbwdb DDIC 0001 )
    Perform rollback

  • Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

    IMPORT ABAP phase error when install database instance
    Error number 207 error type SPECIFIC_CODE.
    In phase   "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution? 
    Thanks in advance
    synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
    syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
    syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
    synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    Account user="IboSap-PC\nspadm" does not exist.
    Failed action:  with parameters
    Error number 207 error type SPECIFIC_CODE

    It is not easy, really , it has taken many hours and at the End I got the problems,.
    so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
    without any problem.  In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
    I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
    anyway. thank you for all.
    Best Regards.

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

Maybe you are looking for