Errors when opening any PDF file

Can't find a bytecode file to load.
InitializeFormsTrackerJS is not defined
1:App:Init
ReferenceError: InitializeFormsTrackerJS is not defined
1:App:Init
From the Javascript console I get the above whenever I open any PDF file from Acrobat XI Pro.
I'm at version 11.0.7.
Where is the source of this problem ?
A search for InitializeFormsTrackerJS shows no hits in the Javascript folder.

The folder is Acrobat\Javascripts
Repair your Acrobat installation.

Similar Messages

Error when opening a pdf file in chinese

Hello,
I have created a specific PO form by copying the standard one BBP_PO in SRM.
After generating a pdf file with my specific form, I get the error "There was a problem reading this document (15)" when I try to open it.
I can see some characters, and then everything disappears. I have both english and chinese characters.
The chinese language is installed.
If I use the standard form, I don't get the error !
In the form, I use some standard text, which are created in english and chinese.
Thanks for your help.
Marc

Just so you know, my default PDF can opener remains set to Preview, though I will use Acrobat Reader when and if it serves my need.
The upside of the Show scroll bars set to always is intuitive with applications. The downside is that any web content that has the CSS overflow:scroll configured will permanently have scrollbars attached to that content. At least, that is the behavior with Safari on Mavericks. Since I do web work too, I have left my scrollbar setting to when scrolling.
I believe the OP issues about resizing PDFs has to do with the default nature of Preview to open PDFs in continuous, rather than single page mode. In the former state, one must always fuss with resizing the Preview window, and in the latter, Preview does what it should do — a single, tightly cropped PDF page. Setting the Single Page preference setting in one document does not make this behavior permanent for subsequent documents.
I made two changes to Preview that open any PDF in Single Page mode, and tightly cropped to that page:
Preview PreferencesPDF: Define 100% scale as: Size on screen equals size on printout
Defaults write
Change to ~/Library/Containers/com.apple.Preview/Data/Library/Preferences
defaults write com.apple.Preview kPVPDFDefaultPageViewModeOption 1
Continuous view mode is (0) zero
PDF documents will now default to Single Page mode

Error when opening =any= PDF with Reader

Hi! Since installing the new Reader software, I keep getting the same error message whenever I try to open =any= PDF, from those on my system for some time to those just downloaded.
The error message says:
Attempt to access invalid address
I can open any PDF with Sumatra or Foxit, so it's not in the file...
Bruce

Hi Bruce,
Are you using EMET Antivirus? I have seen the issue caused due to this. Try disabling it and check.
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

Error when opening a pdf file

I have QTP 10.0 and Adobe reader 9.3 installed on my machine. The machine I am using is a VMware device.
I have downloaded and installed the PDF Test Toolkit and the Adobe SDK.
For QTP I have the ActiveX, Web and Adobe add ins loaded.
I do not have Acrobat loaded.
For my first script all I wanted to do was open an existing PDF. I used the code displayed below.
Option Explicit
Dim gApp
Dim gPDDoc
'### Create objects required for the test
Set gApp = CreateObject("AcroExch.App")
Set gPDDoc = CreateObject("AcroExch.PDDoc")
'### Open a PDF Document
gPDDoc.Open ("C:\TestData\PerfOnVMware")
'### Kill all created objects
Set gPDDoc = Nothing
Set gApp = Nothing
For both Set statements (in italics) I am getting the following message
"ActiveX Component Can't Create Object "AcroExch.App"
Also, as to the instructions. I read the instructions to mean that you need the Adobe Reader OR Adobe Acrobat. However in some of the research I have been doing on other boards many of the solutions indicate that Acrobat is required. Can some one take a moment and clarify what I will need installed on each machine in order to create and execute scripts.
Any thoughts would be helpful
Thanks
Mike

Please see the document 'Interapplication Communication API Reference' in the Acrobat SDK. Reader doesn't support the AcroExch methods. You can use the DDE methods. For more quesitions, please visit the SDK forum:
http://forums.adobe.com/community/acrobat/acrobat_sdk
You should still be able to record and playback UI events in Reader.
Thanks - John Briere
Engineering Manager, Acrobat Production Engineering

How do I stop my Reader version 11.0.1 from crashing when opening any PDF file?

I've had this problem since yesterday and it started very suddenly but now I cannot view any of my files because the reader crashes after a few seconds. I cannot use the app at all, please help!
The files I'm trying to view on my reader are not new, meaning that they used to work just fine without causing the reader to crash. So I don't think that is the problem.
I've also already checked that I have plenty of space on my iPad so the problem shouldn't be related to memory either.
The next step, I guess, would be to remove and reinstall the app but then I'll lose all my neatly organized files.
The reader is version 11.0.1 and my iOS is version 7.0.4.
I'd appreciate any help I can get because this app is what I mainly use my iPad for and, as I said, now it's not working at all.

Try resetting your iPad: Hold down the Home and Sleep/Wake buttons at the same time. Keep holding them down until you see the Apple logo, then let go. Reopen Reader.

Error when starting Acrobat 8 or opening any *.pdf file!

I tried to reinstall, opening any other aplication - still the same...
By the way - cannot open any PDF file in any Adobe product...
please - help!

The folder is Acrobat\Javascripts
Repair your Acrobat installation.

I installed Adobe over a month ago when prompted that my trial was expired. We pay 19.99 a month, and when signed in it states our next payment is due Feb 5, 2015. Yesterday I got a prompt that my trial was expired and I couldn't open any pdf files anym

I installed Adobe over a month ago when prompted that my trial was expired. We pay 19.99 a month, and when signed in it states our next payment is due Feb 5, 2015. Yesterday I got a prompt that my trial was expired and I couldn't open any pdf files anymore. I uninstalled and reinstalled and it worked all morning until just now, now it is prompting me that the trial is expired AGAIN. What do I do to fix this permanently??

You installed Adobe what? Assuming that perhaps you have a subscription for Acrobat XI Pro, I will move your post to the appropriate forum. You could also try to Contact Customer Care.
[topic moved to Acrobat.com Services forum]

When openning a PDF file, a new tab will open but it will be blank, it does not download or open any pdf files, this just started the last 3 days....!!!!

Hi,
I am on the verge of deleting Firefox from my computer as it has wasted hours of my time, and none of the online trouble-shooting answers are of any help.
Until recently I could open PDF files in my browser window, and today its impossible to open any pdf file, it will not even download if I choose to download it.
This issue has been going on and off for nearly a year, and I downloaded Nitro PDF add-on to solve it previously as the Adobe reader add-on didn't do anything. Today In the options menu of applications where I can select the program I want to open the PDF files with I can no longer find the NitroPDF reader as an option, so I choose the Adobe add-on and no matter how many re-starts it refuses to initiate any PDF files, all I get is a open and empty new tab.
Internet explorer opens PDF files fine, so I know its not computer related.
I am running Windows Vista Ultimate, Firefox Version 19.0.
If there is a way of fixing this, please help because currently I am at the end of my patience.
Regards,
Emre

Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again..

I downloaded reader 11 and now i cant open any pdf files, i recieve internal error

after downloading reader 11 , I can not open any pdf files on my computer... i recieve internal error

Well, what computer?
Mylenium

After up grading to Adobe Reader XI why can't I open any PDF files?

I am running windows vista and had been using Adobe Reader 8 - when I upgraded, can not open any PDF files. When I attempt to open a PDF file, I receive the following messages:
Update available
Please take a few seconds to update Adobe AIR and get the very latest features. Acrobat.com cannot continue until you update Adobe AIR.
after attemptng to down load the "update" I receive the following message.
Sorry, an error has occurred
This application requires an update to Adobe AIR but downloading that update was not successful.
I have uninttalled all of my Adobe freeware & reinstalled statring with "adobe AIR" then "adobe Reader" and then attempted to opne a PDF file only to see the same message
Update available
Please take a few seconds to update Adobe AIR and get the very latest features. Acrobat.com cannot continue until you update Adobe AIR.
Agein after attemptng to down load the "update" I receive the following message.
Sorry, an error has occurred
This application requires an update to Adobe AIR but downloading that update was not successful.

Thank you Pat,
I have already been there done that. I first Un-installed all of my adobe freeware (reader, flash player, air. etc) then started reinstalling. First I reinstalled reader (latest version Reader X), same error messages. added AIR (latest version not listed - Last updated April 1st, 2012 -
maybe that should tell me something), same error messages. I un-installed these two and reinstalled AdobeFlash Player,Adobe Shockwave Player,&Adobe Media Player, verifying that each worked after each reinstall of the next program everything was OK until I put Reader back on (NOTE: I dug all the way back to version 8 & still had the problem). for some unknown reason I finally right clicked on a PDF file on my desk top & was greeted with a the drop menu & he option of "open with" for fun I clicked on the "open with" & found that I had two options the first was a white Icon with the Stylized A and labeled Acrobat.com the second was the normal red Icon we all know & live
when I reset the default to the normal red Icon everything began to work just as I have always had adobe reader work. Now I have no clue how or when I picked up the "Acrobat.com" program even worse it does not show up under programs on the control panel. When I have a few moments this evening, I will run a search for "Acrobat.com" & hopefully be able to remove it from my computer.
Bottom line I don't know how I got the program which seems to have caused the breakdown of adobe reader but by resetting the default program to open PDF files it is now working as it should
Thanks for the suggestion.
Sincerely,
Richard L. Cornick
Contact information: Cell (562) 522-5504; Fax: (562) 531-0684

Adobe Reader XI will not open any PDF file

I have tried removing and reloading reader. I have also tried using the WIndows Control Panel to repair the Adobe file. Nothing has helped. I cannot open Adobe Reader XI directly from the programs folder. Nor will it open any PDF file when I double click the file. I am running WIndows XP.

Some other things to try...
Update to Reader version 11.0.5
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

I DL ver 9,10,11 of Free Adobe Reader - cannot open any PDF file.

I get an error message "The instructions at xxxx referenced memory at xxxx. The memory could not be written." What is wrong?

tI did as you instructed and got no good results. I even restored my Adobe files from several weeks ago from Carbonite and could not load Adobe REader nor open any PDF file that I was previously able to open.
When I try to open a PDF file, I get a web page that has two panes. One pane on the left has a red box area with some options. The pane on the right is grey and has some options. The web page disappears after about 5 seconds so I can't read it all.
I tried opening three files after reinstalling Adobe Reader and after restoring my Adobe files. One folder that I restored as "Cache" and had a file inside called "AcrobatFnt11 then another file called AdobeCMapFnt11 and the other file called AdobeSysFnt11.
I'm extremely anxious to be able to open and load all my PDF files like I was able to for years before.
Thank you.
[spam links removed again!]

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

MAC OSX version 10.5.1 and I can't seem to open any PDF - FILES HELP

I am having a lot of frustrations opening any pdf files on Safari.
I re-installed adobe acrobat reader 7.0.9 and nothing is happening.
Everytime I attempt to open up a PDF file it's blank or black.
Please help me
don't know what's happening?
Deena

MAC OSX version 10.4.11 and I can't seem to open any PDF
I'm having this problem as well. I have both Acrobat Professional 8.1.2 and Adobe Reader 8.1.2 installed with the proper internet plug-in, using OS 10.4.11. When I try to open a pdf file in Safari I get a window asking me to choose an application to open the file, but both applications are dimmed and cannot be selected. I have tried re-installing Acrobat Reader, but without success. In Firefox I simply get a blank, darkened window. __Previously, before I installed Leopard and was using Tiger, I had Acrobat Reader 7.0 as well as AR 8.0 installed, and I was only able to select AR 7.0, but it worked. Now nothing works. This is a serious problem that Adobe needs to address!

Can't open ANY pdf files. Updated to 10.1.8--still "Access Denied."

Hello everyone,
I am currently unable to open any PDF files.
I recently did a clean re-install of Windows 7 (restored my Toshiba Satellite to out-of-the-box state).
After that, I restored all of my personal files from an external HD.
Now, every time I try to open a PDF, Adobe Reader gives me the following message:
"There was an error opening the file. Access denied."
The only solution I've been able to find online has been this:
Edit > Preferences > General> Clear "Enable Protected Mode at Startup"
Also,
Edit > Preferences > Security (Enhanced)> Clear "Enable Enhanced Security"
Neither of these has fixed my problem.
I also updated to the lastest version--10.1.8--with no success.
I also re-downloaded and installed PDF Creator and its companion, PDF Architect. Curiously enough, I can't open any PDF in that program either. I'm not sure if there is some global setting I'm missing or something.
Access to these files is critical to my work, so any help is appreciated!
Thanks,
Lauren

I updated from within the Adobe Reader X program (Help > Check for Updates) and it tells me: No updates available. Installed: Adober Reader X (10.1.8) MUI
Is 11.0.5 something I would have to access another way?
Also, I'm still not sure if that would fix my problem. It seems most people with the "Access Denied" error had it fixed with the very first 10.1 update, and I have 10.1.8, so I'm not sure what's causing mine.

Errors when opening any PDF file

Similar Messages

Maybe you are looking for