Errors when sending a print job via samba with CUPS 1.4.6-3

Hello people, this is my last resource i made the things posted in the wiki for CUPS and CUPS via samba and CUPS specific problems and cant find the solution.
When i send a print job using HP LaserJet Professional p1102w with driver hpcups 3.11.5, requires proprietary plugin i recieve this message in localhost:631
"/usr/lib/cups/filter/hpcups failed"
if i change driver to hpijs, 3.11.5, requires proprietary plugin i recieve this message in localhost:631
"Session setup failed: NT_STATUS_NO_SUCH_FILE"
the hp-plugin is installed, in fact i have to change the link from python 3 to phyton 2.7 to work properly.
the uri for the printer is the form smb://username:password@domain/hostname/printer_name also tried smb://username@hostname/printer_name and smb://username:password@hostname/printer_name
i am in a Domain with Active Directory, all the share from server to my computer is working fine so i dont think its a problem from samba. All the data for the uri is correct in fact is my desktop pc at work with window$, i am trying to send a print job from my laptop with Arch.
Any ideas? Thanks and sorry for my bad english.
Last edited by engelus (2011-06-13 15:33:38)

same problem, please advise.

Similar Messages

Error when sending a document link via email

Hi people,
I am on SAP EP 6.0 SP15 and below I describe my scenario.
I have some documents created in some KM folders. Today, I tried to send one of those documents via email to another portal user. If I go through Send To > Send Copy..., that other portal user receives the email with the document attached and he is able to open it... so far so good.
However, if i try to send the same document but now using a link (Send To > Send Link...), the other guy receives the email, but the link results in a 404 error when clicked.
I investigated a little and found that the link sent contains "" signals to indicate spaces in the folder names, instead of "%20". I believe this is the issue, because if I change manually the "" signals to "%20", the link works perfectly.
My question is: is there a way to configure the sistem to use "%20" instead of "+" to represent spaces? Or I will have to remove the spaces from ALL my folder names?
Thanks
Fernando Urzedo

Hi Fernando,
this seems to be a bug. In the release notes of KMC SPS16 incl. P1, this is not reported as fixed (on the other hand, not every fixed bug gets reported in the release notes).
You could try to patch your portal first; if you don't can do this at the moment or if the bug persists after patching, please open an OSS message.
Hope it helps
Detlev

Error when sending data request

Hi All,
   i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
   rfc to source system successful showing with ash status
   data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
    it is showing technical status with red as processing overdue
                       processing step call to source system
   so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.

Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Error when sending message(e-mail) from Process Chain ?

Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started                                                                          00        516         S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S
30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S
30.06.2006 18:06:01 Job finished                                                                        00        517         S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141

Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                     Duration   Duration
                         Completed Error      In transit Waiting    In transit Waiting
                                                                         hh:mm      hh:mm
B08(100)                        0          0          0          0
FAX Telefax              0          0          0          0       0:00       0:00
     5 INT Internet             0          0          0          0       0:00       0:00
SMTP              0          0          0                  0:00       0:00
X40 X.400                0          0          0          0       0:00       0:00
        RML R/Mail or            0          0          0          0       0:00       0:00
        PAG                      0          0          0          0       0:00       0:00
        PRT                      0          0          0          0       0:00       0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar

Error when updating Playbook OS version via Blackberry Desktop Manager

Greeting,
I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
I've attached the step by step screenshots for reference, where you can find here:
http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
Thanks,

BLock wrote:
Sorry I can not help you with your problem but perhaps you can help me.
Can you advise where I can find info on "disable the automatic update"?
just ignore the update if you dont want it on the playbook
for reloading the OS
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed: BASIS         14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS         03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS         03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS         30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS         03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS         03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

Error when sending message: 500 Timeout

while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.

Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini

Test message from RWB: Error when sending message: 401 Unauthorized

Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
Gourav

Yes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav

RWB:Error when sending message: 404 Not Found

Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0

Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish

Error when sending message: Method not implemented

Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
Liang

HI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav

IPhoto 08 vsn 7.1.5 software issue. Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
Papasailor

YOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Errors when sending a print job via samba with CUPS 1.4.6-3

Similar Messages

Maybe you are looking for