Errors when trying to connect with SAP Netweaver BW Connection

Hi,
I'm trying to pull in data from a Bex query using the BW Connection.
I'm on SP4.
When I add the connection from Data Manager, I can logon to BW, however when I browse for queries I get .COM exceptions and Class not Registered errors.
Any ideas what could be causing this?
Thanks,
Angela.

Hi,
To design dashboards using BICS connection these are the prerequisits :
on the client side : Xcelsius Enterprise Designer 2008 SP2 or above (trial or engage versions do not offer this connectivity),
                     SAP GUI patch 901 or above
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks.
To view dashboard (run time) :
on the client side : a web browser, Adobe Flash Player
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks
Important Note: The BI Java stack and Single Sign On between ABAP and Java are a must have to get this connection working.
@Sri

Similar Messages

  • Embedding SWF file with SAP Netweaver BI Connection to JSP page

    All,
    Is it possible to embed a SWF file with SAP Netweaver BI connection that is already published in BW system to a JSP page?
    Thanks...

    Hallo,
    embedding the published web-template via iframe into the jsp should work:
    <iframe id="test" src="/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?DASHBOARD=TECHNICAL_NAME_DASHBOARD" width="600" height="800" />
    Regards,
    Roman

  • Error when trying to chat with more than one perso...

    I am getting an error when trying to chat with more than one person at a time.
    The message is like below:
    There has been an error while proccesing.
    Do you want to start debugging.
    Row: 0
    Error: No authorization
    Thank you in advance for assistance.
    Kind Regards
    Marcin
    Attachments:
    error.jpg ‏12 KB

    What is the version of Internet Explorer installed on your computer?
    In Internet Explorer go to Help -> About Internet Explorer.
    P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

  • HT1222 my ipod reads error when trying to sync with itunes

    my ipod reads error when trying to sync to my itunes

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

    Hello, Experts,
    I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
    An error message is "Error while communicating with the server. Framework message: Authorization failed."
    Here are the steps that were implemented and how this issue was reproduced:
    SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
    Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
    EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
    BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
    EPM connection was successfully created in SAP BusinessObjects CMC.
    EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
    From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
    Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
    In EPM Add-in we have pressed Logon.
    In connection window selected SAP BusinessObjects Enterprise connection type.
    An error "Error while communicating with the server. Framework message: Authorization failed." appears.
    Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
    Looking forward you valuable comments and suggestions.
    Thank you in advance.
    Donatas Budrys

    Dear, Roberto,
    Our user has Full Access to all BPC tasks and it is administrator in BI system.
    Also we can successfully connect with the same user using Connection type "Local".
    We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
    ==============[System Error Tracing]==============
    [System  Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name]    : ValidateUser [DateTime]    : 04/23/2014 10:58:06 [UserId]      : [Exception]    DetailMsg  : {System.Exception: Invalid user    at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing  End ]==============
    It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
    Looking forward your feedback.
    Thank you in advance.
    Best regards,
    Donatas

  • How can I connect with SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition

    Hello together,
    I downloaded and installed the SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition on a virtual client.
    I toke a long period to finish the installation.
    Now some questions to use this system in the right way:
    1.) How can I get a "developer license" which do not expire? Because the link http://www.sap.com/minisap seems to be not ok.
    2.) How can I connect via network with the sap system? the application server is running on a vm client with a static ip i.e. 192.168.1.5. And my laptop gets a ip in the same range. I have installed the gui on my laptop and tried to connect with the system. But it does not work! I used as application server the ip of the virtual machine. I use the gui witch is installed on the same host like the application it works (with localhost as application server adress)
    3.) Where can I download the newest version of the SAP Gui? I do not have a service marktplace account? Is it possible?
    4.) I read in the documentation that it should be possible to reach the sap system also with web dynpro: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
    But it does not work. I got an error message: Service cannot be reached
    Note
    The termination occurred in system NSP with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    Regards
    Christian

    I fixed in the meantime the second problem. It was a problem with my local firewall. But the other three points are still open.
    Thank in advance for your help

  • Connection with SAP NetWeaver

    Hi All,
    I am very new for SAP. I just want to know is there java API's to connect NetWeaver.
    Let me explan it more I want to create user in NetWeaver Portal without login just by java API's. For that i need to connect with portal. Is there any way to connect it?
    Thanx
    Shant

    Hi Shanth,
    You can create a WebDynpro Project, add the com.security.api.jar in its build path and write the following code in the iView or controllers init() method:
    String userId= "ABC"
    IUserMaint newUser = null;
    try {
    //Create User
    newUser = UMFactory.getUserFactory().newUser(userId);
    //Create User Account
    IUserAccount uacc =     UMFactory.getUserAccountFactory().newUserAccount(userId, newUser.getUniqueID());
    uacc.setPassword("XXXXX");
    uacc.setPasswordChangeRequired(true);
    uacc.save();
    uacc.commit();
    catch(Exception e)
          e.getmessage();
    save the project, create an application for the project and deploy it on the Enterprise Portal server you want to create the user on.
    If you have any more queries feel free to ask.
    Regards,
    Seema Rane.
    P.S. Please reward points if reply found helpful.

  • Error when trying to iChat with AIM Buddy with 10.4.11 - Any Thoughts?

    Connecting with IChat and AIM Buddy who is on a PC.
    The buddy invites me and I accept. It tries to start but it will not connect.

    Hi
    have you done the following?
    iChat>Preferences>Video>Bandwidth limit: None
    System Preferences>Quicktime>Streaming>Streaming speed: 1.5Mbps T1/Intranet/LAN
    Restart iChat
    Has PC end set up as per these instructions:
    http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service
    Steve

  • Error when trying to extend range using an Extreme connecting to a Express

    Ok,
    My cable modem is connected just fine to my AE. I can run iTunes (which is nice!) off of it, connect to the internet off of my MBP and all. I just bought a AEBS to be able to EXTEND the range of my connection for all of my small townhome. However, when I go to through the Airport Setup Assistant to try and set it up, it keeps coming back with an error that says "Error Setting up WDS" or something like that. I've tried this multiple times. I've tried resetting both the AE and the AEBS...still doesn't work. Any clue?
    Thanks,
    Ryan

    It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
    Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
    Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
    If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

  • Error when calling Web Service in SAP Netweaver side.

    An error occurred while trying to make a request to URI 'http://us4184.wdf.sap.corp:1080/sap/bc/srt/wsdl/sdef_WS_SSC_USR_GET_USER_LIST/wsdl11/ws_policy/document?sap-client=000'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details.
    Does anybody know where can I put the cross-domain policy in Netweaver platform?
    Best regards,
    Anders

    Hi Anders,
    The resolution of the crossdomain problem is not to store an cross-domain-policy file at the [SAP] webservice side; but instead it needs to be done at the (every...) webservice client. In case the client is an IIS based webapplication (and thus the ultimate end-users are accessing it via their browser), this is not such an issue. It there is sufficient to put an crossdomain.xml policy file in the IIS main virtual root of your 'client' .net webapplication (c:\inetpub\wwwroot). It also can be required or at least helpful to put a clientaccesspolicy.xml file; both at the main virtual root and in the virtual root of the specific webapplication
    In case of SharePoint application, the crossdomain.xml file must be stored in the WSS virtual root of that site; c:\inetpub\wwwroot\wss\virtualdirectories\<your SharePoint webapp>
    Best regards, William.

  • How do I prevent windows from shutting down ITUNES with a Data Protection Execution error when trying to sync with my Iphone 4S in a 32 bit windows environment?

    I first was not able to install ITunes 10.5.  Apple upgrade installer caused a data protection execution error and windows reverted the process back to the original software.  I then removed ITunes through the control panel ap.  I removed Bonjour and quicktime.  I could not use the windows uninstaller to remove the apple upgrade installer and had to find a fix it program on the microsoft web site to fully remove this program.  After doing this, I was able to load and install itunes 10.5.  However, now when I try to sync my new 4S phone, the sync only goes to the 2nd or 3rd step before eliciting a DPE error and causing itunes to shut down.  I tried making a new user profile.  Opened I tunes in the new profile and began to search for music on my computer.  The program again elicited a DPE error.  I looked to see if quicken was still on the computer and maybe causing a hangup, but it is no longer installed.  Ok, I am at wits end and have spent much too much time on this issue.  Please help.

    I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
    a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
    b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923      RESTART UR COMPUTER..
    c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.   
    d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
    I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
    IPhone4, Gateway Windows Vista 32bit

  • IPhone 5 and iPad 4 error when trying to sync with iTunes

    Have a em that I just can't find an answer to online so hopefully someone can help. the story so far,
    New Windows 8 laptop, everything installed and working well, 3 days later it would not boot so had to do a system refresh, after having to then reinstall ALL myprograms again it was all working except for iTunes (which was working before the refresh).
    I plug either the iPhone 5 or iPad 4 initunes detects and tries to connect, after about 5 mins I get the following error;
    "iTunes was unable to load class information from Sync Services. Recconnect or try again later".
    I click OK then click on my device in the top right and again after 5-10 it displays the normal front end screen. I then click on sync (bottom right)and I get the "waiting for sync to start" top middle as per normal. After another 5-10 mins t hangs at syncing 3 of 6 and I get the following message;
    "iTunes could not back up the iPad ******** because a session could not be started with the iPad"
    I think it has something to do with the refresh and had I know trefresh in Windows 8 was basically a reinstall of windows then I would have done a factory reinstall and started afresh.
    Everything is running the latest IOS, and I have searched both messages on line and tried most of the answers tha others have had but still the problem. I can see all the Apps, Music etc in iTunes but it looks like it will not back up.
    Any help would be greatly appreciated asmy last option will be to do a factory reset.
    Thanks

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • Error when trying to install oracle client (can't connect to X11 error)

    Hi guys,
    I need help to install Oracle Client 10g. I am quite a novice so I am totally hopeless when it comes to difficult or linux-kind-of-terms.
    I can't use GUI at all, so everything got to be done through putty.exe
    my local pc (where the putty is, IP 192.168.8.194) -> linux red hat 4 IP 192.168.8.31 (where the oracle client should be!)
    when I run the runIntaller I receieved error mentioning about DISPLAY variable haven't set yet.
    I did set it trhough putty as follow
    DISPLAY=192.168.8.194:0.0
    export DISPLAY
    no luck...I still hit an error that eventho this time the error is like below;
    =============================================================================
    Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable.
    192.168.8.194:0.0
    192.168.8.194:0.0
    OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    - Make sure that client users are authorized to connect to the X Server.
    OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    ==============================================================================
    When I run the xclock using GUI I can see it pop up on my screen, but when I run xclock trhough putty, I see that it just went blank...is that right because I am using putty or what?
    Can you guys please help? Everyone that had this problem like find the solution real easy...I just so frustrated because this setting is just not working, and I have no idea what to check. Do I need extra library or something to install this?
    Please remember that I can use GUI in my test server but I can't use any GUI at all when I am implementing this.
    Thanks thanks thanks.
    Daniel -

    Hi-
    You are right. putty is just a simple console without X11 in it. how come it didn't even cross my mind?
    Thanks for the reply. I solved it by using third party software called xdeep, from what I got from internet looks like this and the software you were talking about hold the same purpose. This xdeep is pretty easy to configure and in just few seconds I can launch the installer! Gee...!
    For those guys that having the same problem as me then find xdeep software from google and browse on the configure webpage. I found a step by step configuration setting from the internet too and it's real easy.
    Daniel -

  • Ldap  error when trying to bind with Active directory

    Hi,
    I'm using the oracle doc. to integrate AD with OID and getting the following error
    Doc URL : http://www.oracle.com/technology/obe/obe_AS_10g/im/configssl/configssl.htm
    Creating a Wallet for SSL Connectivity Between OID and AD : Wallet certificate status is ready & i have imported the user,admin & ms root certificate.
    E:\Oracle\Product\Orainfra\BIN>ldapbind -p 636 -h AD_SERVER -U 2 -P password 1 -W file:E:\Oracle\Product\Orainfra\Wallet
    sgslufread: Hard error on read, OS error = 10053
    sgslufread: Hard error on read, OS error = 10053
    UnKnown Error Encountered
    best regards,

    Hi,
    I resolved it and the solution is once we have install the MS certificate Authority on AD we need to reboot/start the domain controllers in order to propogate the changes and after the restart ldapbind was successful.
    Thanks

  • Error when trying to compile with cos.jar

    When compiling on linux/tomcat machine I put the path to cos.jar in my javac command and get the following error:
    .../cos.jar: cannot execute binary file
    I can compile servlets that do not require this jar file but cannot compile servlets that need it.
    Does anyone know how to resolve this?

    Then your command is wrong. The error message tells you that you're trying to execute the cos.jar instead of specifying it in the classpath.

Maybe you are looking for