Errors while copying queries from Infoset to DSO in BI 7.0. Why

Hi All,
I am trying to copy queries from Infoset to DSO in BI 7.0.
Message displayed after entering the data target names in Source Infocube (Infoset) & Target Infocube (DSO).
: Errors when reading InfoObjects for InfoCube (Infoset).
My Infoset has 2 queries.
I need to copy only one query to the DSO which is part of the infoset. How can we achieve this.
Please explain.
Thanks

Hi Murali,
who said the target is different.
The target is different in the sense, source is an Infoset & Target is an DSO.
This DSO is a part of the above Infoset.
RSZC works here but its giving errors as mentioned above.
Regenerate in the sense, u mean i need to create the same again on DSO.
Is there any other way.
If providing some solution, let it be clear.
Thanks.

Similar Messages

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Error while copying queries

Hi Community,
                      I am trying to copy queries from Info Cube to Multiprovider using RSZC, I got error called
"InfoObject 0MATERIAL__0DIVISION missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_CAT missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_GROUP missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_TYPE missing from target InfoCube ZSCMIM_M1"
"InfoObject 0PLANT_COUNTRY missing from target InfoCube ZSCMIM_M1"
            I created Multiprovider with one basic info cube in BI 7.0. by draging dimensions,keyfigure, Unit, time from left to right than I selected the "Select key figures Icon" --> Selected Create proposal for all Infoobjects" same as for Charecteristics.
             I checked the attributes and charecterisctics they are active. Please help me ....
Regds
Dave.

Hi sap Experts,
I have problem in the creation of Hierarchies.
I am working in BW 3.1 IDES
TO_MAT is a CHAR, I have to create Hierarchy for this. I have done the following,
1.Under the Hierarchy Tab I enable Time dependent Hierarchy structure and activated.
2.On Rt.click -->Create Hierarchy- Given Name and description
Now I am in Hierarchy material Change: Modified version window
3.clicked Create Charactaristic Node button
When I selelct the Info Object CHAR - [ " Info Object TO_MAT is not entered for TO_MAT as a foreign Hierarchy Characteristic"] this error is coming. I tried with other CHAR also. advice me to correct this .
Help will be Highly appreciated.
Thanks.
Hema

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Error while transferring Data from PSA to DSO

Hi all,
We had a requirement to load data into the DSO.We are extracting it from R3.
Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!

Hi,
the difference in records can be due to some changes happening in the transformation.
check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
Regards,
Dhanya

Template error while copying page from another application

I am copying a page from one application to another within the same workspace. The page I am copying has several customized template that it uses. When I copy the page to the other application all goes well until I get to the step of assigning the Templates. Instead of seeing the list of templates used and being able to change them for the new page to match with the page i am copying, i get an error in the Templates area that says:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Anyone else run into this? Is this because of the number of templates? I have added several new customized templates. The pages all work ok, its just when i am trying to copy a page from one application to another.
Thanks,
John

I'm seeing this behavior as well, but in the Authorization Schemes & LOV sections of the copy. I can continue with the page copy, but the LOV & Scheme information is lost and needs to be manually re-entered. Would love to get a fix for this!

Error while copying PIR from original plan

one requirment plan is there in system ,say X - Ver 00 (Product P1,P2,......P8 Demand is there of 10 ea for each product for 07/2007.)
I am using MD61, now I want to copy the same plan to another requirement plan Y (for 08/2007)
MD61 -> Entered req. plan no. as Y ver as 01 , References button on top left corner used , copy from original plan , in the dialogue box req. plan X entered , here system shows only P1 qty as 10 , for all other products from P2-P8 qty appears as blank. Select all & copy gives error.
No schedule lines exists for P2,.....P8.
Please explain.

Go to md61, select radio button -- req. plan no as --Y click on ref.
Copy from-Independent requirements-select-(green tick)-give req. plan no X (from where you want to copy all data)---select(green tick)
system will display old plan-select all-copysystem will disply p;lan which is copied from plan X-do the changes where you want. Save it.
Go to Md63-give req. plan no as Y--stystem will display the new plan

Error while copying profile...

Error while copying profile from the default profile...
runtime error- DBIF_RSQL_INVALID_REQUEST
pls help..

Irfan,
You check weather new role name is in Z,Y name space or not?, check the same thing in other clients as well. If you are in windows , then your server mey need reboot because i faced similar problem but sorted after reboot.
Regards,
Hari.
PS: Points are welcome.

Run-time Error '429' when copying queries from one userid to a new userid

Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
Lynda

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

Loading data from infoset to DSO

Hi,
Iam loading data from InfoSet to DSO..the transformations were fine..no errors found.
But could not activate the target DSO.
Getting error.".Error while activating transformation"
How to over come this??
Thanks
Ravi

Hi Ravi Kanth,
Please check the following links. Hope this helps.
[/message/1410802#1410802 [original link is broken];
[/message/2115621#2115621 [original link is broken];
Thanks,
Sruthi

Error while copying page template!

Copying of a simple page template fails in Portal 10.1.2 with the following error:
Internal error (WWC-00006)
Error while copying page. (WWC-44262)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44088)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
No data found (WWS-32101)
I already had this error in Portal 9.0.4.

Hi Christian!
I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
But thanks for this information.
Eckhard

New-AzureDeployment - Error while copying content to a stream

Hi All,
I am trying to deploy a packages using the Azure Powershell Cmdlets.
Each time I try to deploy a particular package, I get the following error message..
New-AzureDeployment : Error while copying content to a stream.
At line:1 char:1
+ New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
+ FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
Looking at the inner exception I am getting
Unable to read data from the transport connection: The connection was closed.
The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs. The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
and I can deploy other packages successfully using PowerShell and using Visual Studio.
Thank you for any help you can provide.

Hi,
This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Errors while copying queries from Infoset to DSO in BI 7.0. Why

Similar Messages

Maybe you are looking for