Errors while loading Product master via HCI
Hello Experts,
We have been facing some issue while loading the product master via the HCI. Here is the reason taken from the log file:
REJECTION_CODE
REJECTION_CODE_NAME
REJECTION_DESCRIPTION
140
Inappropriate use of special character
Special characters are not allowed
We took the same records and loaded through the flat file and they were successful and can be seen in excel ui
We also checked for any inappropriate characters which are not allowed but we couldn't find any.
How should we load the data via the HCI with no errors?
Any help would be highly appreciated.
Thanks
Karan
YS
We are also just getting the same error message as Karan. This issue, for Kraft, just started this week. We looked at the SAP note that you poated and it does not help as it tells us to add code to remove special characters. There are none in the source table in ECC.
The issue is that we have made no changes and this error has started to hit us.
We upgraded to Patch 7 of the HCI Agent this pas weekend. Is that a possible driver of this issue?
-Jeff
Similar Messages
-
Getting Duplicate data Records error while loading the Master data.
Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
RajuHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
Error while loading to Master data attribute 0product
Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
Data record 2421 & with the key '300000072 &' is invalid in value
'300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AMHi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V -
ABAP dump error while updating product master in APO
Hi All,
Greetings from Vijay!
I need to your help to resolve below issue ;
I am getting error '
No simulation parameters could be set for the
active version'
While i am updating and trying to assign active version to my product master in APO which are created in APO for regression testing
and also sometimes system throwing dump error'
Error in the ABAP Application Program
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.;
I appreciate your help
Thanks
Vijay JobHi Vijay,
Can you check note 1465462 ?
The same problem is mentioned in the note with correction .
Regards,
Mukesh pandey -
Error while loading 0Plant master data in PSA
Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V -
Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing? -
Error while loading material master data
I am loading delta data for material master and its giving me the following error:
"Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
How to resolve this error?
Need ur help urgently.
ThanksHi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu -
'Overlapping Time Intervals' error while loading the Master Data
Guys,
Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash -
Error while loading the master data into hierarchy
Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
PrateekHello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep -
Getting the error while loading the master data
Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
AnupamHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
Error while loading the master data
Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.SHi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1. -
Error while loading Customer master
Dear all,
I am loading customer master from ECC and it got loaded successfully to PSA but when i am executing DTP, then it is giving an error as some of the data are not maintained in English Language and they are in chinese or japanese or some other languages.
So is there any way to solve it??
Regards,
Sohil Shah.Hi,
You can exclude those in Transformations by writing code.
Below is the thread for your reference.
start routine code for deleting records in different language
Let us know if you still have any issues.
Reg
Pra -
UoM conversion error while loading Material Master
Hi,
Our Legacy system is also SAP (lower version) and we're trying to move the data to ECC6.0. We're using MATMAS_MASS_BAPI03 to move Material master records.
All the Alternative UoM to be moved with 'no change'. Everything gets moved except for LBs and FT3s and we get message 'UoM Conversions are inconsistent'.
I entered LBs, for example, online in the new system and found that conversion factors (NUmerator and Denominator) were indeed different.
Legacy LB: Numerator - 4756 and Denominator - 65113
New System LB: Numerator - 2564 and Denominator - 35103
If you have noticed, we will get the same result if you divide Numerator by Denominator.
Note: KG values were same in the both systems without any issue.
What should we do to get it right?
Best Regards,
RamHi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu -
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan GHi, did you referred this link : Error during customer master mass update through XD99
-
Getting error while loading omaterial master data
Hi all,
I am loading data to omaterial_attr .i am getting an error material number version is invalid.but in source system itself it shows that perticular material number master data also.what's the problem? there are totally 3000 records.only for 100 records i am getting that error.but in sourcesystem(r/3) i have all these material number values also.
0MATERIAL : Data record 12 ('A02 '): Version 'A02 ' is not validHi Rama,
I dont think this error is due to space because if u have specified ALL_CAPITALS in RSKC then space is included in it by default. Moreover, there wont be any space in ur data in PSA.
Have you maintained the material number format???? If not, this error can come.
Assign points if this helps.
Regards,
Maybe you are looking for
-
Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed. I just go
-
How do i set up my eprint on my ipad so that im able to print?
how do i set up my printer on my ipad so im able to print?
-
Syncing iCal and Address Book w/ my Treo 650 (Who overwrites who?)
I am able to sync both address book and ical with my treo 650. My question is: 1. When I change a date or contact's info on my treo why does it not change that entry on my Mac? It adds a different one. 2. Each time I sync I get the message for both A
-
Problem with variables declared as private?
Hi all, I am currently having a very weird problem when i am running one of the JSP application deployed using weblogic. I have a variable x and is declared as private. By looking at the log file of every transaction done by the users, i can't trace
-
Rating reset when connecting to iTunes
I think the title says it all, I use the highest rating playlist a lot, I also set songs I want to remove to a one star rating while listening to later remove the songs. Now, this doesn't work, everything I've changed is back from where I started whe