Errors while replicating Materials from ECC to SRM

Hi All,
I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
All the Prod type & Prod category have been replicated into SRM from R/3.
And no materials have copied in SRM.
how to resolve this ?
regds,
CB
Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

Hi,
DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
Upon checking in SMW01 i got the above errors as
" Category for material group 013 does not exist
Message no. COM_PRODUCT_API002
Diagnosis
If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
Procedure
Check whether the material groups have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1"
Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
Regds,
CB

Similar Messages

Regarding Address Field while replicating data from ECC to SRM

Hi Forum,
I have a few qauestions regarding the mandatory fields that must be maintaned in ECC before replicating data to SRM..
1)Why is the address data (one we see in PA20 by selecting Addresses for the user) i.e. city and pincode required vefore replication.
2)Is there a way by which it can be defaulted so that we dont have to maintain it for each and every user?
Regards,
Anubhav

Hello,
Try if this helps.
SAP Note : Note 550055 - EBP/CRM: New integration for business partner : Section g:
Addresses: If addresses are required to generate correct business partners of the organizational unit role (in SRM, for example), the HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If it is mandatory for each business partner of the organizational unit role to have an address, but the relevant organizational units do not always have a separate address, you can define a standard address. Create a separate business partner for storing the standard address. The number of this business partner, which is used as a container, is stored in the HRALX/OADBP switch (formerly BUPA/ADRBP).
Thanks
Ashutosh

Transfer of non-valuated materials from ECC to SRM

I kindly request your help with an issue that I am facing.
The scenario is as follows :
1. There is a non valuated material X (material type UNBW).
2. MRP run happens and generates a PR with account assignment U.
3. Transfer report BBP_EXTREQ_TRANSFER is executed in order to transfer the PR to SRM.
4. The PR reaches SRM, but the SC is not created instead in SLG1 there is an error thrown, "No account assignment exist. Enter an account assignment".
5. In the backend now If I try to change the PR i get the error " 6Q204 (Procurement profile 36 cannot be changed).
Is this scenario supported ?? i,e, transfer of non-valuated materials from ECC to SRM.
Kindly let me know if you have any idea on this.

Hi,
As per your query you have not determind accounts assignment. Please do these activity.
Please see the below link.
http://help.sap.com/saphelp_srm30/helpdata/en/a9/cde93a2876a81ae10000000a11402f/content.htm
Regards,
Anil

Error while transferring materials from R/3 to APO

I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC" , the inbound queue has been blocked . what might be the problem

Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí

Error while Replicating Objects from R/3 to CRM

Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimal

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Error while replicating data from MSSQL to HANA

Hello Colleagues,
I have created SLT configuration where the replication has to happen from MSSQL database for NW BPM for 4 tables. I have also applied a transformation function to convert date columns in the BPM tables to right desired format while replicating in HANA.
Now when I use the SAP HANA Data Provisioning Editor to replicate the data from these BPM tables, I am getting following error :
Conv.obj. Z_BC_BPEM_EL_RDS_021: Calculation job in sender system could not be started
In the configuration I have used Job Options as No of data Transfers Job : 003 , Initial Load Jobs : 002 , No of Calculations Job : 001
We are using SLT 2.0 and BASIS release 740.
Please suggest what could be done to remove that.
Regards,
Archana

Archana
There could be number of reasons for this issue. We need to first start filtering one by one and take out the possibility. Please check the things in the following order.
1. As everyone mentioned, check if you have free available WPs. System is going to use Background WP for running calculation job in the Source system. Normally Basis define sufficient number of WPs but sometimes they are occupied. You can check using TCode SM50 ( you need to do that on each host in a multi App server environment ).
2. Try increasing your calculation jobs in SLT using TCODE LTRC --> Administration Data --> Change no of Jobs. Make sure you have enough free background WP in your SLT and Source system.
Incase the above methods do not work, provide the following information.
1. Where exactly you see the error message. Are you able to add the table to Data provisioning from LTRC.
2. Are you able to add any more tables and do the replication.
Mahesh Shetty

Error while replicating employees from R/3 to CRM. BP no. are not created

CRM Experts,
Request your help in solving the following issue.
While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
<b>Message:</b>
IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
<b>Immediately processing not possible: Screen output without connection to user.</b>
Steps:
1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
3. The BP number is not getting generated.
Really appreciate your solutions/suggestions/clues.
Thanks in advance,
Vijay

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Errors while transaction download from ECC- CRM

we are trying to download transactions from ECC 5.0 to CRM 5.0.
the initial download has stopped in between and we get an error "SysFail" in the Inbound queue (SMQ2). Information on this error is "The current application triggered a termination with a short dump"
when we try to analyze the short dump, it says the termination occured in the ABAP program :SAPLCRM_DOWNLOAD_MAP - in "FILL_BTM_PARTNER". In the source code you have the termination point in line 254 of the include program "LCRM_DOWNLOAD_MAPF37".
please provide pointers to resolve this issue .
thanks
RH

following is the place where the error is being triggered in the program, any suggestions?
Information on where terminated                                                                   |
Termination occurred in the ABAP program "SAPLCRM_DOWNLOAD_MAP" - in
"FILL_BTM_PARTNER".                                                                          |
The main program was "SAPMSSY1 ".                                                             |
In the source code you have the termination point in line 254 of the (Include) program "LCRM_DOWNLOAD_MAPF37
Source Code Extract
Line
SourceCde
number_int = <ls_bapisdpart>-itm_number.                                |
if sy-subrc eq 0.                                                                     |
ls_btm_partner-ref_guid = ls_item_keys-guid.                                        |
ls_btm_partner-ref_kind = gc_object_ref_kind-orderadm_i.                            |
endif.                                                                                |
endif.                                                                                |
*orderadm_h_guid
ls_btm_partner-orderadm_h_guid = ls_orderadm_h-orderadm_h_guid.                         |
*bp_partner_guid                                                                          |
if lv_nrart = gc_partner_r3_types-customer.                                             |
*-----AG, WE, RE, RG, etc.                                                                  |
call function 'CRM_BUPA_MAP_CUSTOMER_TO_BP'                                           |
exporting                                                                           |
iv_customer       = <ls_bapisdpart>-customer                                      |
      importing                                                                           |
ev_partner        = ls_btm_partner-bp_partner_guid                                |
exceptions                                                                          |
partner_not_found = 1                                                             |
others            = 2.                                                            |
if sy-subrc eq 0.                                                                     |
display_type                                                                             |
s_btm_partner-display_type =                                                       |
                       gc_partner_no_type-business_partner_no.                             |
no_type                                                                                |
ls_btm_partner-no_type =                                                            |
gc_partner_no_type-business_partner_no.                              |
     else.                                                                                |
if ls_btm_partner-partner_fct = '00000001'.                                         |
>>>>>
message x020(crm_order_misc) with gv_logsys_r3.
endif.                                                                              |
   endif.                                                                                |
if ls_btm_partner-task     eq gc_bdoc_task-delete and                                 |
ls_btm_partner-ref_kind eq gc_object_ref_kind-orderadm_i.                          |
special handling for deleting item partner. In this case the item                         |
partner must not be deleted but updated with the header partner                           |
insert ls_orderadm_h-orderadm_h_guid into table lt_header_guid.                     |
insert gc_object_name-partner into table lt_requested_objects.                      |
call function 'CRM_ORDER_READ'                                                      |
exporting                                                                         |
it_header_guid       = lt_header_guid                                           |
iv_only_spec_items   = true                                                     |
it_requested_objects = lt_requested_objects                                     |
importing                                                                         |
et_partner           = lt_partner_header                                        |
exceptions                                                                        |
others               = 1.                                                       |

Region Code Error while replicating locations from backend.

Hi,
While executing the program BBP_GET_LOCATIONS_ALL we got error as region XX not defined for country IN (India). This error is for all regions in the log.
We suppose this was because the standard regions codes(States) in ECC backend and SRM are mismatch. For eg. Region Code for Maharashtra is "13" in SRM whereas it is "MAH" in ECC.
Is our assumption correct. What could be the possible solution to resolve this issue?
Immediate responce will be higly appreciated.
Thanks
Hussain

Hi. Just change the config in SRM to match ECC.
It is almost the same IMG path in the 2 systems.
In SRM it is SAP Web Application Server > General Settings > Set Countries > Insert Regions.
You can also set up a distribution model to automatically syncronise the config or you could go to Utilities > Comparison in the config in SRM then select your ECC system as the logical destination and it will syncronise as a one off for you.
Regards,
Dave.

Error while Reading Idocs from ECC 6.0 to Sun IDM .

Hi Gurus,
We have a scenerio where we have to update the Sun IDM Server with all the changes in HR Data happening in ECC.
For that... we have
1. Created a Logical System for Sun IDM server, Port, RFC Connection (TCP/IP).
2. Assigned Partner Profiles, Distribution Model etc. for msg. type HRMD_A ;
3. We have created a Communications User used by the IDM server to connect to ECC.
Idocs are created daily and are in status 03 - Data passed to Port OK !
and on the In Sun Identity manager 8.0 we have created SAP resource adapter for ECC 6.0,
after giving resource parameters our test connection is successful.
We also changed edit synchronisation policy for the same but when we start synchronisation in IDM, it is unable to read any idocs although Idocs are generated in SAP .
Log file gives the message as "Incoming IDoc list request containing 0 documents"
We also have one more error ;
some times while doing a connection test : JCO.Server could not find server function 'åäåä¹'
while most of the times the connection is successful.
Please suggest .

Hi Gurus,
The error got resolved .
The changes in the settings i did :
SAP SIDE : Made the RFC Connection Unicode.
IDM SIDE : Checked on the "SAP Server Unicode" checkbox; while doing the HR Activ Synch Settings.
This Resolved the error.
regards
Vaibhav

Error with replicating materials from ERP to CRM 7.0

Hi experts!
After dump (No PXA storage space available at the moment) materials are not replicated from ERP to CRM.
In transaction R3AC1 there are no filters for object MATERIAL.
Replication is managed by transactions R3AR2-R3AR4 with parameters MARA-MATNR.
In transaction SMW01 the status of incoming for material BDOC is green.
But in the bottom of status bar there are some messages appears when clicking the buttons u201CShow BDOC message classic datau201D and u201CShow BDOC message extended datau201D correspondingly:
u2022 No classic data for BDoc message ХХХХХХХ found.
u2022 No extended data for BDoc message ХХХХХХХ found.
The table COMM_PRODUCT is empty.
Can anyone help me ?
Kostya Khveshchenik.

HI Julian,
I have exactly the same issue please would you let me know the solution to fix this issue.
Will really appreciate if you can respond to this asap.
Regards
Shashidhar

Error while Replicating Datasource from R/3

In R/3 extraction, after activating the datasource in R/3 and replicating the datasource in BI, I received an error saying that 'SQL error occured when accessing a table' with Message no. RSAR051... Help me in this.

I checked in ST22. But there is no problem in it. Pls give me the solution..

LSMW-IDOC error while tranferring data from ECC to CRM

Hi,
We got an error
Error status 'A' calling validation service.
Validation error occured: "Module CRM_BUPA_MAIN_VAL, B Doc type BUPA_MAI".
When we are doing LSMW with IDOC in CRM.
Please provide ur valuable help in this problem.
Thanks & Regards
Sriram Tumuluri

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Error in replicating data from r3 to SRM

hi,
my entries in database table comm_product(SRM) was deleted by mistake,now when i run T-code r3as, i get the error 'Hierarchy for R/3 material types does not exist', please help.
regards,
johny.

Hi,
Using com_hierarchy check whether hierarchies are present are not. Start down load of customizing objects first and then business objects. In R3AS select DNL_CUST_BASIS3,DNL_CUST_PROD0, DNL_CUST_PROD1, then MATEIRAL and start down load again.
Rgds,
RRK

Errors while replicating Materials from ECC to SRM

Similar Messages

Maybe you are looking for