Errors while updating dat in to ODS

Hi,
When I am loading data to ODs I faced the following
Database error 1502 at INS access to table /BIC/B0009
This problem is due to the database space error
I have searches the SAP note 410743 which gives solution for my problem but that particulat SAP note is for versions 2.0B & 2.1 C & we are using version 3.5
so the sap note canbe used in or version or any other note

Hi
Go through these links
http://help.sap.com/saphelp_nw04/helpdata/en/d1/a9f6924b8a11d189510000e829fbbd/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/d1/a9f6924b8a11d189510000e829fbbd/content.htm
http://help.sap.com/saphelp_webas610/helpdata/en/d1/a9f6924b8a11d189510000e829fbbd/content.htm
Regards
GTR

Similar Messages

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Error while updating data virtual provider data to targets

Hi,
We are getting error while trying to update data from virtual cube based on a function module in 2004s.
It seems that it is complaning about the mapping of 0recordmode to the targets. has anybody faced this problem? We are in SP10
Thanks

I am sorry its not a cube but a direct update ODS to a basic ODS but both belongs to BCS. I have generated the export datasource multiple times but still no use.
The source ODS name (direct update from BCS) is called ZBCS_01Z and the target is called Z_AJ_ODS.
When I run the load I get "Job Terminated is source system" with message type X.
Here is some of parts of the dump:
Information on where terminated
    Termination occurred in the ABAP program "SAPLUCI1" - in
     "MAP_FIELDNAME_BW_2_SEM".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 245
    of the (Include) program "LUCI1F02".
    The program "SAPLUCI1" was started as a background job.
    Job Name....... "BIREQU_45J0LGOMXBS8F1LBT44BFHJDD"
    Job Initiator.. "BISWAR"
    Job Number..... 10455800
Thanks

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Getting error while updating data element using Xquery Automator

Hi,
I am getting following error while i am trying to update a data element in my task.
<Nov 28, 2011 5:02:40 PM IST> <Error> <oms> <BEA-000000> <automation.AutomationDispatcher: Failed to execute
on/plugin/external/ACOI_TMIP_POC/1.0.0/CLARIFY_Task.automatedtask.acoi_tmip_poc.ResponseAutomation] due to E
hile running Script resource [file:///D:/AshishWorkspace_WithOrchestration/ACOI_TMIP_POC/resources/CLARIFY_R
exception location: ; SystemID: module with no systemId*; Line#: 15; Column#: -1*
com.mslv.oms.automation.AutomationException: Exception thrown while running Script resource [file:///D:/Ashi
rchestration/ACOI_TMIP_POC/resources/CLARIFY_Response.xquery]; exception location: ; SystemID: *module with
e#: 15; Column#: -1
the Xquery that i am using is pretty simple:
declare namespace automator = "java:oracle.communications.ordermanagement.automation.plugin.ScriptSenderContextInvocation";
declare namespace context = "java:com.mslv.oms.automation.TaskContext";
declare namespace log = "java:org.apache.commons.logging.Log";
declare namespace oms="urn:com:metasolv:oms:xmlapi:1";
declare namespace prop = "OSM_POC";
declare variable $xmlnsosm7POC := "";
declare variable $log external;
declare variable $automator external;
declare variable $context external;
let $CLFY_XML := //CLFY_XML
let $Id_Number :=//Id_Number
return
automator:setUpdateOrder($automator,"true"),
log:info($log,fn:concat('ID request number is: ', $Id_Number)),
<ord:OrderDataUpdate xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:odu="http://www.oracle.com/OMS/OrderDataUpdate" targetNameSpace="http://www.oracle.com/OMS/OrderDataUpdate" xmlns:ord="urn:com:metasolv:oms:xmlapi:1">
<ord:Add path="/CLFY_ID">{data($Id_Number)}</ord:Add>
</ord:OrderDataUpdate>
Can anyone please tell me the reason due to which this error is coming.
Thanking in advance
Ashish Garg

Hello.
Ok I need you to tell me a little bit more about your automator, did you config an Xquery Automator with Event Type: Internal?
You should declare namespace automator = "java:oracle.communications.ordermanagement.automation.plugin.ScriptReceiverContextInvocation";
instead of
declare namespace automator = "java:oracle.communications.ordermanagement.automation.plugin.ScriptSenderContextInvocation";
And let my ask you, what are you trying to do with the next lines:
let $CLFY_XML := //CLFY_XML
let $Id_Number :=//Id_Number
Becouse I think you are trying to acces the data on the task, If that is the reason, you should better use something like:
let $order := ..//oms:GetOrder.Response
let $orderId := $order/oms:_root/oms:orderHeader/oms:orderId
with the above lines you are accesing the data that has been added to the task and the just acces the node that you nedd, for example here Im accesig the node
orderId under OrderHeader
Another thing is that if you want to update node which already exists in the task data, then you have to use something like:
<OrderDataUpdate xmlns="http://www.metasolv.com/OMS/OrderDataUpdate/2002/10/25">
<Update path="/orderHeader/orderId">{$orderId}</Update>
</OrderDataUpdate>
But if you have to add a new path you should have something like this:
<OrderDataUpdate xmlns="http://www.metasolv.com/OMS/OrderDataUpdate/2002/10/25">
     <Add path="/OrderHeader">
          <Transaction>
               <Name>{$orderId/text())}</Name>
          <ComponentKey>{$controlData/text()}</ComponentKey>
          </Transaction>
     </Add>
</OrderDataUpdate>
For the above transaction you should have in the dictionary the structure, OrderHeader in the root, and inside this the structure another node with the respective names
<Transaction>
               <Name>{$orderId/text())}</Name>
          <ComponentKey>{$controlData/text()}</ComponentKey>
          </Transaction>
Another thing is that you should have all this structures in the Task Data of this Task.
Hope this help
Lucas.

Error while updating data to infocube

Hi BW Gurus,
I am trying to update data from PSA to a non cumulative infocube. However I am getting the following two errors while doing so.
Here is the detail of the error in the details tab.
Record 11534 :Value 'ETFHU224681М2 ' (hex. '00450054004600480055003200320034003600380031041C00') of
Error 4 in the update.
I checked the PSA for the erroneous record and found that
FHU224681М2 is the value of the 0material field.

Hi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers..

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Error while loading data on 0LIV_DS01 ODS through DTP

Hi Expert,
I am trying to load data on 0LIV_DS01 ODS through 2LIS_06_INV datasource data is comming correctly in PSA
while i'm trying to load data on ODS through DTP is runing properly till 9th package but at 10th package it showing me error
like "Exception condition "CTT_NOT_FOUND" raised"
Error Analysis
"A RAISE statement in the program "SAPLRSW0" raised the exception
condition "CTT_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
please tell me how i rectify the error....
Thanks and Regards
Lalit Kumar

Hi,
This error has to do something with Currency Conversion.
While loading from the DSO to the cube, do you have any currency conversions?
Please look at the below threads:
Loading error in 0LIV_DS01
Raise Exception error: CTT_NOT_FOUND
Hope this helps.
Regards
Vishal

Error while updating data in DB2

Hi,
I am working on SOA 11 g.Trying to update data in table of DB2 by using DB adapter.
But I am getting following error,
*[OWLS][DB2 JDBC Driver][DB2]Character data, right truncation occurred; for example, an update or insert value is a string that is too long for the column, or a datetime value cannot be assigned to a host variable, because it is too small.*
I have executed the same query through database navigator, its working fine.
Thanks,
Rahul

Hi Rahul,
Have you changed table structure after generating DB Adapter files? You may try after re-creating DB adapter.
This error may also come if you are not using UNICODE support. Open Oracle JDeveloper, select Tools > Preferences > Environment > Encoding > UTF-8 to enable Unicode support.
Regards,
Anuj

Error while updating Date Field on Process Form.

Hi,
I am using java code to pre-pop date on the process form.First I used a java code whic took java.sql.date as input and returned the same java.sql.date.But it gave an error that:java.lang.String cannot be converted to java.sql.date.......
So I changed the java code and now it takes string as input and returns java.sql.date. This code works fine for Pre-pop adapter and the date is populated on the process form.
But when i use the same code in a Process Task adapter to update the date, then it gives the following error:
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcAdpEvent/updateDataSetValuePost encounter some problems: Adapter Execution Error: updateDataObjFieldValuePost: error updating UD_OID_USR_DATE_OF_BIRTH
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcAdpEvent/updateDataSetValuePost encounter some problems: {1}
Can anyone suggest any method to update date field on process form?

Hi Abhi,
Can you tell me how you have implemented populating an UDF based on Prepopulation of another UDF. I have a similar kind of requirement. It would be great if you share your code or relevant part of it.
Regards,
Sunny Ajmera

Error while updating data in Infotype-0015

Hi Experts,
We are getting following error message while updating Infotype-0015 for newly created wage types:
"Pay scale grpg for allowances for 90000108 is not defined on 20110524"
As per my knowledge we need to maintain table V_T7INA1, V_T7INA3 & feature LGMST.
Pls. throw some lights on this issue, which area we need to take care while configuration.
We are not using India Payroll.
Regards,
Rameshwar

If you are not using then V_T7INA1 and V_T7INA3 doesn't make any duifference. Check the INVAl module of the wage type and configure the table V_T510, V_T539J accordingly.
If it is for India then you also need to configrue V_T7INA9 and LGMST will not be required for India.

Getting database error while updating data to mysql table.

user registration.jsp < jsp user view to get input >
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c"   uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x"   uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
<title>Registeres USers Login Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<body>
<%--debugging code--%>
<%@ include file="debug.jsp" %>
<table width="1049" cellpadding="5" align="center">
<tr>
    <td width="2378"><div align="center">
      <h2 align="center"> User Registration</h2>
       <p>
     <c:url var="HmePgeURL" value="/cw/router/home" scope="page"/>
     <a href="${HmePgeURL}">Home</a>  <c:url var='BSPgeURL' value='/cw/router/login' scope='page'/>
     <a href="${BSPgeURL}">Buy or Sell</a>
     </p>
    </div></td>
</tr>
</table>
<p align="center"> </p>
<p>This website is only open to members of the De MontFort University.
You will need a current @learner.dmu.ac.uk e-mail address in order to register.</p>
<p> If you've already registered for one site you do not need to register again </p>
<c:url value="/cw/router/userregistration" var="UregPgeURL" scope="page"/>
<form name="frmregister" method="post" action="${UregPgeURL}">
<div>
<table width="726" height="285" border="0" align="left" cellpadding="2" cellspacing="0">
    <tr>
      <td width="157" align="right" >Name:</td>
      <td width="561" > <input name="txtname" type="text" value="${param.txtname}"/> </td>
    </tr>
      <c:if test="${!empty requestScope.reqInvalidUserName}">
      <c:out value="${requestScope.reqInvalidUserName}"/>
      </c:if>
    <tr>
      <td width="157" align="right" >Department</td>
      <td align="left" >
          <select name="txtdepartment" value="${param.txtdepartment}" >
            <option></option>
            <option value="Faculty of Art and Design">Faculty of Art and Design</option>
            <option value="Faculty of Business and Law">Faculty of Business and Law</option>
            <option value="Faculty of Computing Sciences and Engineering">Faculty of Computing Sciences and Engineering</option>
            <option value="Faculty of Health and Life Sciences">Faculty of Health and Life Sciences</option>
            <option value="Faculty of Humanities">Faculty of Humanities</option>
          </select>
      </td>
    </tr>
      <tr>
        <td align="right" >Programme</td>
        <td ><input type="text" name="txtprogramme" value="${param.txtprogramme}" />
          (eg: BIS,SE) </td>
      </tr>
      <tr>
      <td align="right" >Telephone Number: </td>
      <td ><input name="txtphonenum" type="text" value="${param.txtphonenum}" /></td>
    </tr>
    <tr>
      <td align="right" >Date Of Birth: </td>
      <td ><input name="txtday" type="text" size="15" value="${param.txtdob}" />(of format YYYY-MM-DD)</td>
      </tr>
    <tr>
      <td align="right" >Username</td>
      <td align="left" >
          <input name="txtuserid" type="text" size="15" value="${param.txtuserid}" />
        (eg. p07269027 from [email protected])</td>
        <c:if test="${!empty requestScope.reqInvalidUserId}">
        <c:out value="${requestScope.reqInvalidUserId}"/>
        </c:if>
    </tr>
    <tr>
      <td align="right" >Password</td>
      <td align="left" >
          <input name="txtpassword" type="password" size="15" value="${param.txtpassword}" />
      </td></tr>
     <c:if test="${!empty requestScope.reqInvalidPassword}">
      <c:out value="${requestScope.reqInvalidPassword}"/>
      </c:if>
    <tr>
      <td align="right" >Confirm Password </td>
      <td align="left" >
          <input name="txtpasswordconf" type="password" size="15" />
      </td>
    </tr>
    <tr>
      <td colspan="2" align="center">
        <input name="frmsubmit" type="submit" value="Register User" />
        <input type="reset" name="Reset" value="Reset" />
      </td>
    </tr>
</table>
     <c:if test="${!empty requestScope.reqQueryErrorMessage}">
      <c:out value="${requestScope.reqQueryErrorMessage}"/>
      </c:if>
     <c:if test="${!empty requestScope.reqInvalidUpdate}">
      <c:out value="${requestScope.reqInvalidUpdate}"/>
      </c:if>
</div>
</form>
</body>
</html>
proregistration.jsp ( registration process jsp)
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c"   uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x"   uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- \WEB-INF\jsp\cwjsps\probooksforsale.jsp --%>
<%-- Probookforsale --%>
<%-- skip field validation and provide blankpage if first time in --%>
<c:if test="${empty param.frmsubmit}">
<c:set var="reqOutcome" scope="request" value=" "/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- initial request --%>
</c:if>
<%-- validate txtname --%>
<c:if test="${empty param.txtname}">
<c:set var="reqInvalidUserName" scope="request" value= "User Name Cannot Be Empty"/>
</c:if>
<%-- validate txtuserid --%>
<c:if test="${empty param.txtuserid}">
<c:set var="reqInvalidUserId" scope="request" value= "User ID Cannot Be Empty"/>
</c:if>
<%-- validate txtpassword--%>
<c:if test="${empty param.txtpassword}">
<c:set var="reqInvalidPassword" scope="request" value= "Password Cannot Be Empty"/>
</c:if>
<%-- if userid invalid or username invalid --%>
<%-- redisplay form with originl typed-in data and with errors marked --%>
<c:if test="${empty param.txtname or empty param.txtuserid}">
<c:set var="reqOutcome" scope="request" value= "failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<c:catch var="pgeQueryError">
<sql:update var="pgeRowCount" scope="page" >
<%-- insert details to trader table --%>
INSERT INTO trader(dbTraderName,dbTraderDepartment,dbTraderProgramme,dbTraderPhoneNum ,dbTraderDOB,dbTraderPNumber,dbTraderPwd)
VALUES(?,?,?,?,?,?,?)
<sql:param value="${param.txtname}"/>
<sql:param value="${param.txtdepartment}"/>
<sql:param value="${param.txtprogramme}"/>
<sql:param value="${param.txtphonenum}"/>
<sql:param value="${param.txtdob}"/>
<sql:param value="${param.txtuserid}"/>
<sql:param value="${param.txtpassword}"/>
</sql:update>
</c:catch>
<%-- check For query Error --%>
<c:if test="${not empty pgeQueryError}">
<c:choose>
<%-- check duplicate record --%>
<c:when test="${pgeQueryError.rootCause.errorCode =='1062'}">
<c:set var="reqQueryErrorMessage" scope="request" value="User already Registered - Duplicate Record" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/>
</c:when>
<c:otherwise>
<%-- database error --%>
<c:set var="reqQueryErrorMessage" scope="request" value="Database Error" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:otherwise>
</c:choose>
<c:set var="reqOutcome" scope="request" value="failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:if>
<%-- check For no rows returned --%>
<c:if test="${pgeRowCount !=1}">
<c:set var="reqInvalidUpdate" scope="request" value="*** rowCount not = 1"/>
<c:set var="reqOutcome" scope="request" value="failure"/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<%-- Otherwise --%>
<%-- Outcome is success --%>
<c:if test="${pgeRowCount ==1}">
<c:set var="reqOutcome" scope="request" value="success" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/> <%-- success --%>
</c:if>
router.jsp ( maps the jsp page based on success and failure)
<?xml version="1.0" encoding ="iso-8859-1"?>
<%-- /WEB-INF/jsp/cwjsps/router.jsp --%>
<%@ taglib prefix="c"   uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x"   uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- setup session if one does not exist --%>
<%@ page session="true" %>
<%-- set up debug variable --%>
<c:set var="sessDebug" scope="session" value="true"/>
<%-- get pathinfo information from the request --%>
<%-- this defines which use case has been requested --%>
<c:set var="pgePathInfo" scope="page" value="${pageContext.request.pathInfo}" />
<%-- uc02 : Login --%>
<c:if test="${pageScope.pgePathInfo =='/home'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/>
</c:if>
<c:if test="${pageScope.pgePathInfo =='/login'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/prologin.jsp"/>
</c:if>
<%-- uc01 : View Details Of Books For Sale --%>
<c:if test="${pageScope.pgePathInfo =='/viewbooksforsale'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/probooksforsale.jsp"/>
</c:if>
<%-- uc01 : process User registration--%>
<c:if test="${pageScope.pgePathInfo =='/userregistration'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/proregistration.jsp"/>
</c:if>
<%-- uc01 : debug --%>
<c:if test="${pageScope.pgePathInfo =='/debug'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/debug.jsp"/>
</c:if>
<%-- uc01 : view Traders Own View --%>
<c:if test="${pageScope.pgePathInfo =='/Traderhomepage'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/Traderhomepage.jsp"/>
</c:if>
<%-- otherwise --%>
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          &nb

Hi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers..

Error while updating data in automator::::urgent

Hi,
I am getting the following error, since a long time, please help me. I am using o2a pip cartridge and osm version is 7.2
I printed out the getOrderResponse, and from the below two index only one index is there in the response, i have no idea, from where osm is picking up the other index. I undeploy and deploy the cartridge many times, but not able to get rid of the error, Please reply, any input is very much appreciated :)
Main error
Cannot convert string "1366694865424 1366694865434" to an integer
Error Details
<23-Apr-2013 1:28:45,789 SGT PM> <INFO> <impl.OrchestrationCascadingLRUPolicy> <Timer-8> <Evicted order /891 from orchestration cache due to cache entry expiry>
<23-Apr-2013 1:28:50,772 SGT PM> <INFO> <GetInventoryDetailsEntryPointTask.GetInventoryDetailsEntryPointBean_doredo> <ExecuteThread: '14' for queue: 'oms.automation'> <Creatin
g automation plugin [class oracle.communications.ordermanagement.automation.plugin.XQueryReceiver] jndi[GetInventoryDetailsEntryPointTask.GetInventoryDetailsEntryPointBean_dor
edo] built using SDK version [7.2.0.3.0]>
Validation error on line 27 of module with no systemId:
FORG0001: Cannot convert string "1366694865424 1366694865434" to an integer
<23-Apr-2013 1:28:50,975 SGT PM> <ERROR> <rule.XQueryHelper> <ExecuteThread: '14' for queue: 'oms.automation'> <Cannot convert string "1366694865424 1366694865434" to an integ
er. . File[*module with no systemId* (actual location resolved to [*module with no systemId*])] Line[27] Column[-1]
>
; SystemID: module with no systemId; Line#: 27; Column#: -1
ValidationException: Cannot convert string *"1366694865424 1366694865434"* to an integer
at net.sf.saxon.type.ValidationFailure.makeException(ValidationFailure.java:233)
at net.sf.saxon.expr.UntypedAtomicConverter$1.map(UntypedAtomicConverter.java:156)
at net.sf.saxon.expr.ItemMappingIterator.next(ItemMappingIterator.java:46)
at net.sf.saxon.expr.ItemMappingIterator.next(ItemMappingIterator.java:39)
at net.sf.saxon.expr.CardinalityChecker.evaluateItem(CardinalityChecker.java:262)
at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
at net.sf.saxon.expr.ExpressionTool.lazyEvaluate(ExpressionTool.java:437)
at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:221)
at net.sf.saxon.expr.Expression.evaluateItem(Expression.java:352)
at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
at net.sf.saxon.expr.LetExpression.eval(LetExpression.java:339)
at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:298)
at net.sf.saxon.instruct.Choose.iterate(Choose.java:754)
at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:306)
at net.sf.saxon.expr.ForExpression$MappingAction.map(ForExpression.java:775)
at net.sf.saxon.expr.MappingIterator.next(MappingIterator.java:54)
at net.sf.saxon.query.XQueryExpression$ErrorReportingIterator.next(XQueryExpression.java:887)
at net.sf.saxon.query.XQueryExpression.evaluate(XQueryExpression.java:220)
at oracle.communications.ordermanagement.rule.f.a(Unknown Source)
at oracle.communications.ordermanagement.rule.f.a(Unknown Source)
at oracle.communications.ordermanagement.rule.o.a(Unknown Source)
at oracle.communications.ordermanagement.rule.XQueryHelper.evaluateList(Unknown Source)
at oracle.communications.ordermanagement.rule.XQueryHelper.evaluateListAsNodes(Unknown Source)
at oracle.communications.ordermanagement.rule.impl.i.b(Unknown Source)
at oracle.communications.ordermanagement.orchestration.execution.impl.j.a(Unknown Source)
at com.mslv.oms.handler.updateorder.UpdateOrderHandlerEJB.a(Unknown Source)
at com.mslv.oms.handler.updateorder.UpdateOrderHandlerEJB.process(Unknown Source)
at com.mslv.oms.handler.a.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.xmlapi.InternalRequestProcessor.processRequestSourceResponse(Unknown Source)
at com.mslv.oms.jsp.xmlapi.InternalRequestProcessor.processRequestSourceResponse(Unknown Source)
at com.mslv.oms.jsp.controller.CoreRequestController.processRequestSourceResponse(Unknown Source)
at com.mslv.oms.jsp.controller.CoreRequestController.processRequestSourceResponse(Unknown Source)
at com.mslv.oms.automation.TaskContextLocal.processXMLRequestDom(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at net.sf.saxon.functions.ExtensionFunctionCall.invokeMethod(ExtensionFunctionCall.java:690)
at net.sf.saxon.functions.ExtensionFunctionCall.call(ExtensionFunctionCall.java:343)
at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:224)
at net.sf.saxon.expr.Expression.evaluateItem(Expression.java:352)
at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
at net.sf.saxon.expr.LetExpression.eval(LetExpression.java:339)
at net.sf.saxon.expr.LetExpression.processLeavingTail(LetExpression.java:548)
at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:686)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.instruct.ElementCreator.processLeavingTail(ElementCreator.java:296)
at net.sf.saxon.instruct.Block.processLeavingTail(Block.java:556)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
at net.sf.saxon.instruct.Instruction.iterate(Instruction.java:308)
at net.sf.saxon.expr.PathExpression.iterate(PathExpression.java:653)
at net.sf.saxon.expr.Expression.process(Expression.java:468)
at net.sf.saxon.expr.LetExpression.process(LetExpression.java:378)
at net.sf.saxon.value.Closure.process(Closure.java:218)
at net.sf.saxon.expr.TailCallLoop.process(TailCallLoop.java:125)
at net.sf.saxon.instruct.UserFunction.process(UserFunction.java:374)
at net.sf.saxon.expr.UserFunctionCall.process(UserFunctionCall.java:451)
at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:688)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.instruct.ElementCreator.processLeavingTail(ElementCreator.java:296)
at net.sf.saxon.instruct.Block.processLeavingTail(Block.java:556)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.instruct.ElementCreator.processLeavingTail(ElementCreator.java:296)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.expr.LetExpression.process(LetExpression.java:378)
at net.sf.saxon.instruct.ElementCreator.processLeavingTail(ElementCreator.java:296)
at net.sf.saxon.instruct.Block.processLeavingTail(Block.java:556)
at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
at net.sf.saxon.instruct.Instruction.iterate(Instruction.java:308)
at net.sf.saxon.expr.PathExpression.iterate(PathExpression.java:653)
at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:306)
at net.sf.saxon.instruct.Choose.iterate(Choose.java:754)
at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:306)
at net.sf.saxon.query.XQueryExpression.iterator(XQueryExpression.java:307)
at net.sf.saxon.query.XQueryExpression.evaluate(XQueryExpression.java:217)
at oracle.communications.ordermanagement.rule.d.a(Unknown Source)
at oracle.communications.ordermanagement.rule.d.a(Unknown Source)
at oracle.communications.ordermanagement.rule.o.a(Unknown Source)
at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
at oracle.communications.ordermanagement.automation.plugin.d.transform(Unknown Source)
at oracle.communications.ordermanagement.automation.plugin.AbstractScriptPluginImplementation.transform(Unknown Source)
at oracle.communications.ordermanagement.automation.plugin.AbstractScriptPluginImplementation.runCommonFunctionality(Unknown Source)
at oracle.communications.ordermanagement.automation.plugin.ScriptRunnerImpl.runScript(Unknown Source)
at oracle.communications.ordermanagement.automation.plugin.AbstractScriptAutomator.run(Unknown Source)
at com.mslv.oms.automation.plugin.AbstractAutomator._runAutomator(Unknown Source)
at com.mslv.oms.automation.AutomationDispatcher.a(Unknown Source)
at com.mslv.oms.automation.plugin.AutomationEventHandlerImpl.processMessage(Unknown Source)
at com.mslv.oms.automation.AutomationDispatcher.onLocalMessage(Unknown Source)
at oracle.communications.ordermanagement.cluster.message.e.a(Unknown Source)
at oracle.communications.ordermanagement.cluster.message.impl.c.a(Unknown Source)
at oracle.communications.ordermanagement.cluster.message.impl.c.a(Unknown Source)
at oracle.communications.ordermanagement.cluster.impl.a.a(Unknown Source)
at oracle.communications.ordermanagement.cluster.message.ClusterMessageHandlerBean.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
<Apr 23, 2013 1:28:50 PM SGT> <Error> <oms> <BEA-000000> <rule.XQueryHelper: Cannot convert string "1366694865424 1366694865434" to an integer. . File[*module with no systemId
* (actual location resolved to [*module with no systemId*])] Line[27] Column[-1]
ValidationException: Cannot convert string "1366694865424 1366694865434" to an integer
at net.sf.saxon.type.ValidationFailure.makeException(ValidationFailure.java:233)
at net.sf.saxon.expr.UntypedAtomicConverter$1.map(UntypedAtomicConverter.java:156)
at net.sf.saxon.expr.ItemMappingIterator.next(ItemMappingIterator.java:46)
at net.sf.saxon.expr.ItemMappingIterator.next(ItemMappingIterator.java:39)
at net.sf.saxon.expr.CardinalityChecker.evaluateItem(CardinalityChecker.java:262)
Truncated. see log file for complete stacktrace
>
<23-Apr-2013 1:28:50,975 SGT PM> <ERROR> <core.logXMLApplicationException> <ExecuteThread: '14' for queue: 'oms.automation'> <An error occurred processing XML request: 0 unkno
wn error code 0 : message Error updating External Fulfillment State>
<Apr 23, 2013 1:28:50 PM SGT> <Error> <oms> <BEA-000000> <core.logXMLApplicationException: An error occurred processing XML request: 0 unknown error code 0 : message Error upd
ating External Fulfillment State>
Error at xsl:if on line 324 of OrderLifecycleManagementModule.xquery:
ORDER_UPDATE_FAILED: Error updating Order Lifecycle record.
at orderlifecyclefn:updateOLMOnComponentStart() (*module with no systemId*#234)
<23-Apr-2013 1:28:50,991 SGT PM> <ERROR> <rule.XQueryHelper> <ExecuteThread: '14' for queue: 'oms.automation'> <Error updating Order Lifecycle record.. . File[http://xmlns.ora
cle.com/communications/ordermanagement/pip/orderlifecyclefn/OrderLifecycleManagementModule.xquery (actual location resolved to [osmmodel:///OracleComms_OSM_O2A_COM_SalesOrderF
ulfillment/1.0.0.0.0/resources/ComponentInteraction/OrderLifecycleManagementModule.xquery])] Line[324] Column[-1]
at orderlifecyclefn:updateOLMOnComponentStart() (*module with no systemId*#234)
>
; SystemID: http://xmlns.oracle.com/communications/ordermanagement/pip/orderlifecyclefn/OrderLifecycleManagementModule.xquery; Line#: 324; Column#: -1
net.sf.saxon.trans.XPathException: Error updating Order Lifecycle record.
at net.sf.saxon.functions.Error.evaluateItem(Error.java:48)
at net.sf.saxon.expr.Expression.process(Expression.java:461)
at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:688)
at net.sf.saxon.expr.LetExpression.processLeavingTail(LetExpression.java:557)

I found a solution to my problem. the resolution is there in the below link.....
http://sonalipatnaik.com/2013/04/25/osm-exception-in-automator-execution-or-order-data-update/

Dead lock error while updating data into cube

We have a scenario of daily truncate and upload of data into cube and volumes arrive @ 2 million per day.We have Parallel process setting (psa and data targets in parallel) in infopackage setting to speed up the data load process.This entire process runs thru process chain.
We are facing dead lock issue everyday.How to avoid this ?
In general dead lock occurs because of degenerated indexes if the volumes are very high. so my question is does deletion of Indexes of the cube everyday along with 'deletion of data target content' process help to avoiding dead lock ?
Also observed is updation of values into one infoobject is taking longer time approx 3 mins for each data packet.That infoobject is placed in dimension and defined it as line item as the volumes are very high for that specific object.
so this is over all scenario !!
two things :
1) will deletion of indexes and recreation help to avoid dead lock ?
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Regards.

hello,
1) will deletion of indexes and recreation help to avoid dead lock ?
Ans:
To avoid this problem, we need to drop the indexes of the cube before uploading the data.and rebuild the indexes...
Also,
just find out in SM12 which is the process which is causing lock.... Delete that.
find out the process in SM66 which is running for a very long time.Stop this process.
Check the transaction SM50 for the number of processes available in the system. If they are not adequate, you have to increase them with the help of basis team
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Ans:
Lie item dimension is one of the ways to improve data load as well as query performance by eliminationg the need for dimensin table. So while loading/reading, one less table to deal with..
Check in the transformation mapping of that chs, it any rouitne/formula is written.If so, this can lead to more time for processing that IO.
Storing mass data in InfoCubes at document level is generally not recommended because when data is loaded, a huge SID table is created for the document number line-item dimension.
check if your IO is similar to doc no...
Regards,
Dhanya

Errors while updating dat in to ODS

Similar Messages

Maybe you are looking for