Errors while using DW after 8.0.2 update

I recently installed DW after not using it for some time and
immediately installed the 8.0.2 update. When I try to Insert a
Master Page Set I receive an error when DW is trying to edit the
detail page. The detail page did not exist before I entered it's
name in the Master Page Set dialogue box but the file was
successfully created once I clicked ok so I have the necessary
rights to modify the file. The error indicates a problem with the
JavaScript used by DW to perform various functions. The error is as
follows:
The following JavaScript error(s) occurred:
At line 517 of file "C:\Program Files\Macromedia\Dreamweaver
8\Configuration\ServerBehaviors\Shared\FieldTypes.js":
TypeError: sql.match(/from(.*)$/i) has no properties
Which is then followed by this error:
While executing insertObject in MasterDetail.htm, a
JavaScript error occurred.
My file is not named MasterDetail.htm so maybe this is part
of the problem.
I seem to remember getting these types of errors many months
ago when i updated a different machine to 8.0.2.
Has anyone seen this before?

See if there's anything in this technote that may help:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
"jmattingly" <[email protected]> wrote in
message
news:et9rfn$l9d$[email protected]..
>I recently installed DW after not using it for some time
and immediately
> installed the 8.0.2 update. When I try to Insert a
Master Page Set I
> receive an
> error when DW is trying to edit the detail page. The
detail page did not
> exist
> before I entered it's name in the Master Page Set
dialogue box but the
> file was
> successfully created once I clicked ok so I have the
necessary rights to
> modify
> the file. The error indicates a problem with the
JavaScript used by DW to
> perform various functions. The error is as follows:
>
> The following JavaScript error(s) occurred:
>
> At line 517 of file "C:\Program
Files\Macromedia\Dreamweaver
> 8\Configuration\ServerBehaviors\Shared\FieldTypes.js":
> TypeError: sql.match(/from(.*)$/i) has no properties
>
> Which is then followed by this error:
>
> While executing insertObject in MasterDetail.htm, a
JavaScript error
> occurred.
>
> My file is not named MasterDetail.htm so maybe this is
part of the
> problem.
>
> I seem to remember getting these types of errors many
months ago when i
> updated a different machine to 8.0.2.
>
> Has anyone seen this before?
>

Similar Messages

  • ARM approval error after upgrading to SP14: Database error while using the secure store.

    Dear GRC experts,
    After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
    Here is the scenario; your advice will be appreciated.
    Task: Manually assign passwords to multiple systems contained in the request
    Where: On the access request, go to “User System Details” tab
    Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
    Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
    This is the failed approval of the request:
    Other scenarios executed as a workaround, and passed the password assignment this time:
    The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
    password.
    ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
    request. The GRC admin can approve once reached for system approval.
    AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
    System information:
      -Netweaver 7
      -GRCFND_A SP14
      -GRCPINW SP13
    Regards,
    Gustavo

    SAP just delivered a note to fix this issue. The number is 2022294.

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • Error while activating DSO after loading from another DSO..Production issue

    Hello Gurus,
    I got an error while activating DSO2 after loading from another DSO1.
    DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
      >Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
      >Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
    this theard was posted after searching for related post in SDN.
    and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
    is their any similar Function Module in BI 7.0 please advice.
    We are using SAP NetWeaver BI 7.0
    Release- 700    Service level- 017
    Thanks in advance
    Sandy

    sloved the issue......
    it was due to wrong data for the related field...
    it  must be "0009 "
    Thanks for ur support. closing the ticket
    Regards
    Sandy

  • We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we

    after the last udpate I can no longer access gmail or youtube. the error message from gmail is: We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects.
    youtube just lists some generic issue regarding cookies, and my cookie settings are wide open. I can open both with safari so it is a firefox issue.

    Did you install any new add-ons lately? I see listed:
    AddThis 3.5.9 ({3e0e7d2a-070f-4a47-b019-91fe5385ba79})<br />
    Advertising Cookie Opt-out 1.5 ([email protected])<br />
    Flash Video Downloader 5.3.2 ([email protected])<br />
    Garmin Communicator 4.1.0 ({195A3098-0BD5-4e90-AE22-BA1C540AFD1E})<br />
    socialvest 0.5.5 ([email protected])<br />
    Troubleshooter 1.1a ([email protected])<br />
    eMusic Community Toolbar 3.21.0.1 ({9ee802e8-c931-47ab-b570-aa8f791598ca}) (Inactive)
    Are any of these new?

  • Runtime Error while using Dynamic Selection

    Hi,
      We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
      Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
    Let us know if anyone has come across a similar issue and any help is appreciated.
    Regards,
    Sarves

    Hi Sarves,
    as Rob said.
    check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
    Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
    Regards,
    Clemens

  • Error while using P2V in Oracle VM 2.2 version

    Error while using P2V in Oracle VM 2.2 version
    I tried using this option by using the steps given on one link but it didnt worked...
    Error:
    code 404, message No permission to list directory.
    I ve tried giving full permissions on for /OVS on Server but invain.
    Can U pls help me...
    Thanks in advance.
    Edited by: user10310678 on Sep 16, 2009 3:32 AM

    user10310678 wrote:
    I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

  • Error while using UTL_FILE

    I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
    from system account. I am using Windows XP with NTFS.
    SQL> create or replace directory FILE_DIR as 'C:\'
    2 /
    Directory created.
    SQL> grant read on directory FILE_DIR to public;
    Grant succeeded.
    1 create or replace PROCEDURE file_upload IS
    2 v_file_name VARCHAR2(200);
    3 v_file_type UTL_FILE.FILE_TYPE;
    4 v_line VARCHAR2(1000);
    5 BEGIN
    6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
    7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
    8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
    9 UTL_FILE.FCLOSE(v_file_type);
    10 DBMS_OUTPUT.PUT_LINE(V_LINE);
    11* END;
    SQL> exec file_upload;
    BEGIN file_upload; END;
    ERROR at line 1:
    ORA-29283: invalid file operation
    ORA-06512: at "SYS.UTL_FILE", line 475
    ORA-29283: invalid file operation
    ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
    ORA-06512: at line 1
    I appreciate if someone can help me in this regard.
    Thanks in Advance.
    Regards
    Muhammad ALi

    Hello,
    What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
    To read from a directory_ . This will read an existing file 'customer.txt" from the directory
    {code}
    CREATE OR REPLACE PROCEDURE .file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
    UTL_FILE.get_line (v_file_type, v_line); -- Error was here
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    _*To open a file*_ This will create customer_XXXXX file under the directory
    {code}
    CREATE OR REPLACE PROCEDURE testme.file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers_'
    || TO_CHAR (SYSDATE, 'dd')
    || TO_CHAR (SYSDATE, 'MON')
    || TO_CHAR (SYSDATE, 'YYYY')
    || '.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
    UTL_FILE.put_line (v_file_type, v_line);
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    Regards
    Edited by: OrionNet on Jan 29, 2009 12:30 AM

  • Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

    I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
    1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
    2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
    3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application.  I got the following error:
    System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
    Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
    I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
    So why am I getting this error?
    GKB

    sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • In Oracle 10g Error while using COLLECT

    I getting error while using collect in 10g
    SQL> ed
    Wrote file afiedt.buf
    1 SELECT deptno
    2 , COLLECT(ename) AS emps
    3 FROM emp
    4 GROUP BY
    5* deptno
    SQL> /
    , COLLECT(ename) AS emps
    ERROR at line 2:
    ORA-00932: inconsistent datatypes: expected NUMBER got -
    Please give me the solution.

    you are using old version of SQL*Plus. if you use later version it will give you correct result.
    Edited by: unus on Mar 14, 2010 4:25 AM

  • Error while using XML Iview, please contact your system administrator.

    Hello everybody,
    I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
        Area           Version
        J2EE Engine    6.40 PatchLevel 98256.313
        Portal         6.0.14.0.0
    , can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
    Thanks in advance,
    Regards,
    Sarabjeet.

    Hi Sarabjeet,
    The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
    And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
    The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
    I will check if I can find out any more specific info.
    Daniel

  • Error while using exp utility

    Hi,
    I am getting the following oracle error while using exp,
    can someone please suggest on this,
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user SIEBEL
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user SIEBEL
    About to export SIEBEL's objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    . about to export SIEBEL's tables via Conventional Path ...
    . . exporting table EIM_ACCDTL_TNT
    EXP-00008: ORACLE error 904 encountered
    ORA-00904: "MAXSIZE": invalid identifier
    . . exporting table EIM_ACCNTROUTE
    EXP-00008: ORACLE error 1003 encountered
    ORA-01003: no statement parsed
    . . exporting table EIM_ACCNT_CUT
    EXP-00008: ORACLE error 904 encountered
    ORA-00904: "MAXSIZE": invalid identifier
    . . exporting table EIM_ACCNT_DTL
    EXP-00008: ORACLE error 1003 encountered
    ORA-01003: no statement parsed

    Satish is right, there exists bug for 11.1.0.6.
    Look at metalink note 741984.1.
    Bug number is 5872788 - there exists patch as well.

  • Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

    Hi All,
    I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
    Error: 1 (Field level error)
      SegmentID: NTE
      Position in TS: 70
      Data Element ID: NTE02
      Position in Segment: 2
      Data Value:
      3: Too many data elements
    For Eg: NTE*GEN*My Text *goes here
    Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
    Can it be done?
    Thanks.

    Sorry, no.
    X12 does not support an escape character so whatever is used for delimiters become reserved characters.
    If you want to allow '*' in the data, you will have to chooser a different Element delimiter.  The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

  • Error while using the export utility

    Dear all of
    I am getting the following error while using the export utility in the Oracle database 9i
    I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
    FOLLOWING ARE THE ERROR ----------------------------
    EXP-00008: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    EXP-00024: Export views not installed, please notify your DBA
    EXP-00000: Export terminated unsuccessfully
    -----------------------------------------------------------------------------------------------------------------------------------

    Can you go to this discussion please.
    Re: Getting a strange error for Exp
    -aijaz

Maybe you are looking for

  • Bug CSCti41352 for Common Services 3.0.5

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm

  • Can not read authorization object in execute Query

    hello:    Now I create a authorization object ZSALR, include Activity,Sales Group,Sales Office.                     Activity = Display ,Execute; When Sales Group = S_N and Sale Office = S_SX. I execute Query restrict by Sales Group and Sale Office. W

  • Changing Forum screen name

    I really want to change my screen name without starting a new account. How do I do it?

  • Image Serializable problem.

    Hi, I have provided a hacked down version of my source code. I am trying to send ClassA across the network. Problem is Image is not serializable so java.io.NotSerializableException is thrown when writeObject is called. How can I get around it? public

  • DW CS5 displays Divs in incorrect postions except in live view. Page works OK live.

    Hi Folks, I have looked for solutions to this issue but most threads I've picked up on suggest something like..."That's Dreamweaver for you...if it works on line why worry...? I'm not sure I buy that line of thought. Anyway the page I'm asking about