Errors with installation Disc 2

i tried to reinstall Tiger since it appeared that the OS needed to be reloaded to resolve another problem, which is that the apple bar disappeared. Now when i get to disc 2, it tells me there are errors and I have to try again. I've followed all of the useful advice on this thread, reset the PRAM, etc but still have the same problem after innumerable attempts to reinstall. Yes, I did clean the disc, and before today it was used exactly once.
http://discussions.apple.com/thread.jspa?messageID=7739310
Anyone have some suggestions? Plan B is to bring it to the apple store and let them figure it out
cheers

Hi pj3,
Did you not try this one from that link?
Use the Customize Install option to reduce the Fonts, Printer Drivers, Languages, and Applications to a minimum, so disk 2 never gets asked for.
Second install disk won't work...
There've been many reports of this, some had the disks replaced by Apple and it worked, some didn't.
A workaround is to reduce the number of Languages, Printer, Drivers, Fonts, and APPs until it no longer needs Disk 2 for the install.

Similar Messages

Boot camp 4.0 getting error the installer disc could not be found

boot camp 4.0 getting error the installer disc could not be found.

See if Windows 8 RP x64 works as an experiment.
Usually slowest burn speed will.
I am assuming that smething changed but there are I presume a number of other people who have, and folks with new MacBook Air too.

HELP! Fatal error with Installation

I keep getting a fatal error with installation of version 7.6. I've uninstalled and installed it several times with the same problem. I have tried installing a older version again and now I'm getting the same error. Help!!

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Very noisey DCD drive with installation disc only

Hi guys,
Just purchased a new 2.66 iMac. Everything is fine except today I inserted the installation disc to change a password and when it spins up and remains spinning ist makes a loud RRRRRRRR noise.
Seems like vibration but it's very loud.
No other discs do this but then I don't think they spin as quickly as the start up discs.
Is this normal?

Hi Dan,
I once had the same problem with an install disk on one of my older Macs (If I remember right it was a Panther retail install disk). It drove me buggy until it finished the install. As in your case, it was the only disk that caused that racket in the drive. Several months later, out of curiosity, I placed it back in the drive to see how it behaved and got the same noise. So I put it away for future use in case I needed to reinstall and eventually just tossed it when I upgraded to later systems. In my opinion the thing was just a bit off balance and that was causing the noise. Probably not too good for the drive when you have to use it.
Rick

I/O errors with some discs in XP with Boot Camp Please help.

I wasn't sure which forum to post this problem in. I've also asked this question in "Using your Intel-based iMac". It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
Ruth

I'm moving this up in the queue since I couldn't find a solution on this site, or elsewhere on the net. Any suggestions greatly appreciated.
iMac 2.4 GHz, 24", 3GB ram
Mac OSX 10.5.5
XP Pro SP3 w/Boot Camp
ATI Radeon HD 2600 Pro

I/O errors with certain discs- Windows w/Boot Camp Please help.

I wasn't sure which forum to post this problem in. It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
Ruth

Hi Ruth,
I sure don't know what the issue is however you might want to go to the Bootcamp forum and post it, maybe someone knows there.
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger

Errors with Installation of OER 11.1.1.5

All
trying to install OER 11.1.1.5.
The installation works fine, including Db setup. schema install etc..
Installing a base domain with the config.sh also works no problem at all
But when I try to create an OER domain (not extending an existing domain, haven't tried that)
the domain creation fails with a jython script error.
I'll get the details and append this post, but I was wondering if this was
a known problem
Environment : Oracle Enterprise Linux R5U4 - 32 bit
On Virtual Box VM 4.08
WLS 10.3.5
sun 1.6 jdk
heres the log output 2011-05-22 20:42:47,915 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /home/u01/Oracle/middleware/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
2011-05-22 20:42:47,939 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.4.0 [home/u01/Oracle/middleware/wlserver_10.3/common/templates/domains/wls.jar]
2011-05-22 20:43:12,695 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2011-05-22 20:43:12,698 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2011-05-22 20:43:13,449 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.5.0
2011-05-22 20:43:13,453 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
2011-05-22 20:43:13,623 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2011-05-22 20:43:13,695 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2011-05-22 20:43:13,695 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.5.0
2011-05-22 20:43:13,696 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
2011-05-22 20:43:13,724 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
2011-05-22 20:43:13,734 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
2011-05-22 20:44:44,248 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
2011-05-22 20:44:56,840 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2011-05-22 20:44:56,843 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2011-05-22 20:45:02,869 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
at org.python.core.parser.fixParseError(Unknown Source)
at org.python.core.parser.parse(Unknown Source)
at org.python.core.Py.compile_flags(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Edited by: michael_j_quinn on May 24, 2011 4:48 AM

Hi Guys
Is no one using OER ??

Error with Installation of SAP R/3 4.6C on Windows 64 Bit

Hi,
we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
Cannot connect to DB, rc = 8192
Can some one help me?
What is the user connecting during the installation?
Thank you!

File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
10=DATABASEINSTANCE_NT_MSS
20=DBCOMMONDBENV_NT_MSS
30=CALCRAM_NT_MSS
40=CDSERVERBASE_NT_MSS
50=OSGROUPSAPLOCAL_NT_IND
60=OSGROUPSAPLOCALADMIN_NT_IND
70=OSGROUPSAPGLOBAL_NT_IND
80=OSUSERSIDADM_NT_IND
90=OSUSERSIDADMPASSWD_NT_IND
100=OSUSERSIDADMRIGHTS_NT_IND
110=DBOSUSERMSSXP_NT_MSS
120=DBOSUSERMSSXPPASSWD_NT_MSS
130=GETDBSIZEKEYS_IND_IND
140=DBBUILDTEMPDB_NT_MSS
150=DBBUILD_NT_MSS
160=DBPOSTBUILD_NT_MSS
170=DBPRELOAD_NT_MSS
180=DBMULTISCHEMA_NT_MSS
190=DBDBSLTESTCONNECT_NT_IND
200=DBR3LOADEXECDUMMY_IND_IND
210=DBR3LOADEXEC_NT_MSS
220=DBR3LOADVIEWDUMMY_IND_IND
230=DBR3LOADVIEW_NT_IND
240=DBPOSTLOAD_NT_MSS
250=DBCONFIGURATION_NT_MSS
260=DBPROCEDURES_NT_MSS
270=DBR3LICENSECREATE_NT_MSS
280=DIPGNTAB_NT_IND
290=EXITMNLSSTARTR3_NT_IND
300=RFCRSWBOINI_IND_IND
310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

Fatal error with installation of je22 con. arch. beta impl.

          In step 6 it says that classpath must start with connector.jar and
          welogic60J2eeConnector.jar. But if I do that then the following
          fatal error occurs. But if the jar files are after weblogic_sp.jar
          and weblogic.jar then there is no problem with starting the server.
          How can I avoid the error? Thanks.
          <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server> <Unable to
          initialize the server: 'Fatal initialization exception
          Throwable: java.lang.VerifyError: Cannot inherit from final class
          java.lang.VerifyError: Cannot inherit from final class
          at java.lang.ClassLoader.defineClass0(Native Method)
          at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
          at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
          at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
          at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
          at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
          at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
          at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
          at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
          at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
          5)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
          5)
          at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
          e_WLStub.java:248)
          at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
          at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
          at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
          java:38)
          at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
          at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
          at weblogic.Server.main(Server.java:35)
          '>


          Sorry for the confusion. As you have already installed wls6.0SP1, you
          can download our JCA beta for wls6.0SP1 from:
          http://developer.bea.com/code/wls.jsp Or directly from:
          http://developer.bea.com/ftp_bin/weblogic60SP1J2eeConnector.zip
          prasen
          Murali wrote:
          >
          > Hi
          >
          > Thanks for the prompt reply.
          > I have once again installed the weblogic600sp1_win.exe (that's
          > the only one available for NT) and the weblogic_sp.jar was not
          > installed (shouldn't it also be with the package). I don't know
          > whether there are any other files which conflict with connector
          > but the problem still exist. I have also wl5.1.0 installed on
          > the same machine. Can both versions be on the same machine?
          >
          > With best regards,
          > murali
          >
          > prasen <[email protected]> wrote:
          > >Looks to me that you are using JCA with weblogicServicePack.
          > >Our JCA for
          > >WeblogicServicePack will be coming out soon. Till then
          > >you should use
          > >our JCA beta with Weblogic6.0(and not with SP).
          > >
          > >prasen
          > >
          > >"N.S. Murali" wrote:
          > >>
          > >> In step 6 it says that classpath must start with connector.jar
          > >and
          > >> welogic60J2eeConnector.jar. But if I do that then the
          > >following
          > >> fatal error occurs. But if the jar files are after weblogic_sp.jar
          > >> and weblogic.jar then there is no problem with starting
          > >the server.
          > >> How can I avoid the error? Thanks.
          > >>
          > >> <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server>
          > ><Unable to
          > >> initialize the server: 'Fatal initialization exception
          > >> Throwable: java.lang.VerifyError: Cannot inherit from
          > >final class
          > >> java.lang.VerifyError: Cannot inherit from final class
          > >> at java.lang.ClassLoader.defineClass0(Native
          > >Method)
          > >> at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
          > >> at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
          > >> at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
          > >> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
          > >> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
          > >> at java.security.AccessController.doPrivileged(Native
          > >Method)
          > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
          > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
          > >> at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
          > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
          > >> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
          > >> at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
          > >> at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
          > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
          > >> 5)
          > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
          > >> 5)
          > >> at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
          > >> e_WLStub.java:248)
          > >> at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
          > >> at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
          > >>
          > >> at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
          > >> java:38)
          > >> at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
          > >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
          > >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
          > >> at weblogic.Server.main(Server.java:35)
          > >> '>

Error With Installation CD (Zen Mic

Hello,
I have recently received a Zen Micro. I attempted to load the software on my computer from the Installation CD provided. When my computer reads the CD the Creative logo comes up and then a screen comes up that says to click the arrow button to begin installation. When I click the arrow button after a few seconds a error message comes up saying the following:
"DemoShield Player has encountered a problem and needs to close. We are sorry for the inconvenience"
It then goes on to say that they have created a error report, I have chosen not to send the report.
No matter what I try the error still appears. Any advice?

I think this is a common problem.
http://forums.creative.com/creativel...essage.id=2475
Click. Then press ctrl+F. Type in "DemoShield" and hit enter.

Error with Recovery Disc Creater, Satellite U205-S5022

When I try to create the recovery disc, I get "an unexpected error 0F00FE-F1-00000002"

Try a different brand of DVD and see if that helps.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Error with installation of elements 11

I had the trail version of 10 installed, decided to wait and get 11, and it errors every time I try to install. Any ideas? 10 installed no problem.

Hi,
PSE 10 trial should not affect the installation of PSE 11 .
I am assuming you are getting the error related to Shared technology installtion problem .
Please restart your system and then install .
Even it does not solve your problem please try solution under this page.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
thanks,
earth-star

Error with installation of EX Edition

hi
I am trying to install expresses edition and was successful also. I am able to run sql+ and isql but when i run enterprise database managment tool on the browser it says server not found. i ran emca also and started the service but still i am getting the error. If anyone else has face the problem and know the solution kindly let me know
regards
dev

the java version yes, not the dbconsole that the OP
was talking aboutGood to know. I only remembered an Oracle session, where they mentioned that XE doesn't come with an "agent" to be addressed by remote OEM ... or was it OMS?
C.
Message was edited by:
cd

Error with installation

When I download any of the updates 11.0-2 to 11.0.0-3, I get an error message saying I can't ope nthe patcher app because it was not downloaded from the Apple App Store.
Mavricks, AE CS6 version 11 (which won't open ).
Any clever soul know a workaround for this nonsense?

Hi,
I've been trying to patch my CS6 to work with Mavericks for weeks now.
Spent four hours on the phone and Adobe Connect with Tech support yesterday, I got the impression the guy gave up (told me to reinstall Mavericks and try a clean reinstall, which i did, no go)
Very annoyed because it seems I've wasted £165 on the upgrade to CS6, nearly a week of labour trying to patch the ^&$*&^ thing, and the result seems to be I have to continue asking my clients to down-save any AE docs to CS5.5 before I can work on them.
Very disappointed.
thanks for all the tips anyway!

Errors with installation Disc 2

Similar Messages

Maybe you are looking for