Errors with nested sequences

I have been working on a large project in which I have been nesting sequences and placing them into one master timeline.
When I update my nested sequences, the master sequence does not reflect the new changes. For example, I deleted an audio track in one of the nested sequences, but the audio track still plays in the master sequence.
My master sequence used to update when I made changes to the nested sequences, but this problem has only occurred recently.
Any help would be greatly appreciated.
Thanks,
Paul

If your audio is mixed down it's likely playing the mixdown back in the rendered sequence. Is that what is happening? However I've not tried it to see if it's a bug. I don't nest audio tracks myself.
Audio mixdowns are transparent in the timeline too unfortunately.
Do video changes also not show up?
Jerry
Message was edited by: Jerry Hofmann

Similar Messages

Time remapping / slow motion extremely jumpy with nested sequence!

I have just finished the rough-cut of a ceremony when I went back to add effects-- slow motion, color correct, etc. only to find that ANY time-change is jittery-- extremely jittery, like it's skipping frames.
For trial purposes I created a new timeline with only one video clip placed multiple times. I reduced one to 50% with frame-blending, the other 50% with NO frame-blending and the final using time re-mapping with frame-blending. At 50% I don't expect fluid movement, but they are all acceptable... Until I put a different timeline in the timeline (I think it's a "nested sequence").
When speed is slowed on ANY nested sequence it is jittery. Whether it is a single nested sequence or a multi-camera sequence, it jumps.
Has anyone else had this problem?! Is this a bug? I never noticed it until this wedding. I am using CS3 and I cannot afford the time to re-edit this ceremony with 2.0.... Unless I have no choice.

Hi Wil,
I have tried using both. Time remapping on the clip (not nested) works fine, so does 'speed change.' But both time remapping and speed change result in jumpy frames when applied to a nested sequenced clip.
I tried this on another (much lower system) and have found the same results. I am begining to think it is the footage but it seems odd that it is perfect when applied to a clip in the timeline but NOT to a timeline in the timeline (nested).
I am on vacation and do not have access to a faster machine until next late next week but for now I will try the export again to be sure Encore sees the same thing.
I am dumbfounded because I had been using 1.5, then 2.0 and now CS3 for weddings for years and have never noticed this. I have noticed it on the both the last project and now this current one.
I thought it could have been the original footage (or a camera problem except that the problems are not there until a nested sequence comes along. I will try moving the footage to my internal drive now and see what happens...
Thank you so far for giving me ideas.

Working with Nested Sequences

I'm working with a 1 hour, 20 minute multi-cam (2 cameras) Sequence of a concert, with many edits. One of the music pieces was complicated, so I separated it out into a separate Sequence, and did the editing. Later, my occasional fcp tutor created a new nested Sequence, into which he transferred the separated piece. The nested Sequence is exactly the same length as the original Sequence.
Since the two cameras required different kinds of Color Correction, we did this in the nested Sequence. Then we exported the nested Sequence as a self-contained QT file. O.K. so far.
But then later, after my tutor has gone, I realize that I don't understand nested Sequences. When I double click on the nested Sequence in the timeline, I'm taken back to the whole concert Sequence in the timeline, out of which the nested Sequence was created. So, Question #1: I can't adjust the audio in a nested Sequence? Question #2: Now, I realize I need chapter markers and I create them in the original whole Sequence, but too bad, they don't appear in the nested Sequence (which has the color correction that I want). How can I transfer my newly created chapter markers in the nested Sequence so that I can now re-export it with the chapter markers?
Thanks, Robert

1. Duplicate the 'whole' sequence (The one with the chapter markers)
Give the duplicate an obvious name. Like "FinaL WITH CHAPTER MARKERS".
2. Delete all clips in this duplicate sequence. (Command-A, then Backspace)
The chapter markers will remain. Don't alter the original sequence in any way!
3. Go to the nested sequence. Copy Everything (Command A, then Command C)
4. Go to the (now empty) Duplicate sequence. Paste (Command V)
Rienk

EDL and OMF from a timeline with nested sequences

I have a short film which I want to send for a conform and as OMF for a sound mix.
Only thing is, I'm making use of the neat way you can edit sequences separately and then place those sequences on a timeline. The problem is, when I output an OMF or EDL from this assembly, all I get is references to the sequences themselves (I.E. only 6 clips)!
What could possibly be the use of this? Surely this is just a dumb oversight by the makers of the program? Does anyone know any way around it apart from just sticking everything on one timeline?
If there is no other way, then surely nesting sequences is just a big waste of time?

OK...I am imagining I am editing a feature film using an Avid. And in this imagining I notice that Avid too has a nesting feature called COLLAPSE. And in sequences that have been collapsed, EDLs and Cut Lists don't reference the clips inside the collapsed area. I now imagine I am working on a network TV series (cop drama, on for 13+ years), also on an Avid, and there too, collapsed sequences don't spit out proper EDLs.
I find this funny since Avid has the best media management in the world...but.
Now I am imagining me or my assistant (when I get to be the big editor I'll have the assistant do it...but now I am the assistant so it is ME doing it) going thru the sequences and EXPANDING THEM to show all the clips so that a proper online can occur.
I imagine you have to do the same with FCP. But I am new to the program, so I am not sure. Wait...wait...wait. I did a test. Yes, my imagination is VERY good. I have to do what was suggested...open the nest and copy/paste that onto the main timeline.
Mom always said I had a wild imagination.
Nesting or collapsing your sequences are done to add filters to multiple clips, like letterboxing or color correction. When you output an EDL, you don't need that, so the nest is MOOT.
Reflect...take note. Do it manually.
Tom.

Trouble with nesting sequences

Hello.
The "transparent" elements of my sequences are not preserved when I bring them into another sequence/timeline and apply an effect or motion to it. Is this typical? They appear to be fine, at first, but when they are rendered or exported, the nested sequence has a black background instead of a transparent one. I'm working targa files with transparent elements, which work just fine in their source sequence.
I apologize if my wording is awkward or if this has been answered elsewhere.

This is not my experience.
When I add transparent elements to a sequence and I nest this sequence into another one, transparency is preserved, even after rendering (I can superimpose the sequence with transparent elements to another clip in the timeline, and this appears in the transparent areas).
Exporting is a different issue. FCE can Export/Quicktime Movie only using DV or HDV codecs that do not preserve transparency. There is a possibility however: you may Export/Using Quicktime Conversion and select the Animation codec which preserves transparency. But before exporting you must make sure that the sequence is not rendered, otherwise the non transparent rendered files will be used (to do that you can make the tracks not Visible and then Visible again, in order to delete the render files; or you can disable and enable again the transparent clips).
Piero

Error with a Sequence, but not sure ...

Hi,
i have a problem, i dont know the reason for this. I will try to explain it.
I have 2 HTML DB Pages, the first shows the values of the second in a report with a search function for the different columns. The second page you can edit the entries and add new ones. The second page consists of different fields (date, text and number...), one field is filled with a primary key which is a sequence. No Problem till yet.
When i want to add an entry and an error occurs(ex. text in a date field, the validation works and the message will be shown:" Incorrect format for a date"). Then i correct the mistake and want to add the entry after i had filled all required fields.
Then this message appears:
ORA-20001: Error in DML: p_rowid=1201, p_alt_rowid=EVENT_ID, p_rowid2=, p_alt_rowid2=. ORA-01403: no data found
Error ORA-20001: Error in DML: p_rowid=1201, p_alt_rowid=EVENT_ID, p_rowid2=, p_alt_rowid2=. ORA-01403: no data found
OK
That happens only when a required field isnt filled at the moment of the submit, then i correct it, Submit it again and the message appears. When i fill all the fields without an error(validation message) it works.
I need a solution for this problem, i hope you can help me.
Thanks Marcus.

Sounds like your PK sequence is getting prematurely incremented when the page is submitted. When the validations fail, the (bad) PK is getting into your hidden PK item and so when you correct the values and Submit again, it is trying to update some other record than the one that the OnLoad Row Fetch process had loaded.
Just a guess, you would need to explain your problem in much more detail before we can assist you.
Specifically,
1. What are your OnLoad and After Submit processes on the Page 2 ( the editable page)?
2. How is the PK on your table being generated? Using a before-row trigger or within the HTML DB page itself?
3. If trigger generated PK, be sure to use the "Returning primary key into item" feature on the Automatic DML (after submit) process. This will ensure that the record you just created will be loaded when the page is refreshed.
Hope this helps.

JPA error with nested exception for more details

Hi All,
A strange thing is that when i can deploy javaee app successfully. But some time, it is failed and i have to wait for 10, 15 minutes then i can deploy again. When i got error, below is the error message:
I don't know if you can find a hint.
INFO: EclipseLink, version: Eclipse Persistence Services - 2.3.2.v20111125-r10461
SEVERE: Local Exception Stack:
Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
                at org.eclipse.persistence.exceptions.DatabaseException.errorRetrieveDbMetadataThroughJDBCConnection(DatabaseException.java:361)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:602)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:206)
                at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:488)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:188)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:277)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:294)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:272)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.loadPU(PersistenceUnitLoader.java:211)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.<init>(PersistenceUnitLoader.java:120)
                at org.glassfish.persistence.jpa.JPADeployer$1.visitPUD(JPADeployer.java:224)
                at org.glassfish.persistence.jpa.JPADeployer$PersistenceUnitDescriptorIterator.iteratePUDs(JPADeployer.java:495)
                at org.glassfish.persistence.jpa.JPADeployer.createEMFs(JPADeployer.java:233)
                at org.glassfish.persistence.jpa.JPADeployer.prepare(JPADeployer.java:168)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
                at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
                at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
                at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
                at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
                at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
                at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
                at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
                at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
                at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
                at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
                at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
                at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
                at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
                at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
                at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
                at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
                at java.lang.Thread.run(Thread.java:619)
Caused by: java.sql.SQLRecoverableException: Closed Connection
                at oracle.jdbc.driver.PhysicalConnection.getMetaData(PhysicalConnection.java:4508)
                at com.sun.gjc.spi.base.ConnectionHolder.getMetaData(ConnectionHolder.java:345)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:589)
                ... 42 more
SEVERE: Exception while invoking class org.glassfish.persistence.jpa.JPADeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
javax.persistence.PersistenceException: Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
                at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:517)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:188)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:277)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:294)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:272)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.loadPU(PersistenceUnitLoader.java:211)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.<init>(PersistenceUnitLoader.java:120)
                at org.glassfish.persistence.jpa.JPADeployer$1.visitPUD(JPADeployer.java:224)
                at org.glassfish.persistence.jpa.JPADeployer$PersistenceUnitDescriptorIterator.iteratePUDs(JPADeployer.java:495)
                at org.glassfish.persistence.jpa.JPADeployer.createEMFs(JPADeployer.java:233)
                at org.glassfish.persistence.jpa.JPADeployer.prepare(JPADeployer.java:168)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
                at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
                at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
                at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
                at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
                at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
                at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
                at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
                at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
                at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
                at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
                at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
                at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
                at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
                at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
                at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
                at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
                at java.lang.Thread.run(Thread.java:619)
Caused by: Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
                at org.eclipse.persistence.exceptions.DatabaseException.errorRetrieveDbMetadataThroughJDBCConnection(DatabaseException.java:361)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:602)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:206)
                at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:488)
                ... 40 more
Caused by: java.sql.SQLRecoverableException: Closed Connection
                at oracle.jdbc.driver.PhysicalConnection.getMetaData(PhysicalConnection.java:4508)
                at com.sun.gjc.spi.base.ConnectionHolder.getMetaData(ConnectionHolder.java:345)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:589)
                ... 42 more
SEVERE: Exception while preparing the app : Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
Local Exception Stack:
Exception [EclipseLink-4019] (Eclipse Persistence Services - 2.3.2.v20111125-r10461): org.eclipse.persistence.exceptions.DatabaseException
Exception Description: Error while obtaining information about the database. Refer to the nested exception for more details.
                at org.eclipse.persistence.exceptions.DatabaseException.errorRetrieveDbMetadataThroughJDBCConnection(DatabaseException.java:361)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:602)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:206)
                at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:488)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:188)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:277)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:294)
                at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:272)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.loadPU(PersistenceUnitLoader.java:211)
                at org.glassfish.persistence.jpa.PersistenceUnitLoader.<init>(PersistenceUnitLoader.java:120)
                at org.glassfish.persistence.jpa.JPADeployer$1.visitPUD(JPADeployer.java:224)
                at org.glassfish.persistence.jpa.JPADeployer$PersistenceUnitDescriptorIterator.iteratePUDs(JPADeployer.java:495)
                at org.glassfish.persistence.jpa.JPADeployer.createEMFs(JPADeployer.java:233)
                at org.glassfish.persistence.jpa.JPADeployer.prepare(JPADeployer.java:168)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
                at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
                at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
                at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
                at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
                at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
                at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
                at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
                at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
                at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
                at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
                at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
                at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
                at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
                at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
                at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
                at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
                at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
                at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
                at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
                at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
                at java.lang.Thread.run(Thread.java:619)
Caused by: java.sql.SQLRecoverableException: Closed Connection
                at oracle.jdbc.driver.PhysicalConnection.getMetaData(PhysicalConnection.java:4508)
                at com.sun.gjc.spi.base.ConnectionHolder.getMetaData(ConnectionHolder.java:345)
                at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:589)
                ... 42 morethanks,
-Hoang Long

r035198x wrote:
Yep, the appserver got hold of a usable connection but the connection was closed before the appserver had finished/committed with it. It could be that the connection was closed by the database or some firewall timeout setting.
A good start is to investigate options of configuring your appserver's connection eviction policies including forcing a validation SQL to be executed when a connection is acquired. Make sure that such a query doesn't impact on performance and have some performance and integration testing before rolling out.i found that if i close the computer which causes this issue, hence other dev computers can deploy normally.
"deploy" here i mean deploy to a running instance on each dev's machine.
From this, i would guess the common database server itself rejects connection from clients.
I will try to investigate more if i am missing something.
And here i found a link that possibly a first good attempt:
[http://www.eclipse.org/forums/index.php/m/505809/]
EclipseLink automatically recovers from communication failures, but there is little we can do to diagnose the failure. We basically execute a query and have to wait for the JDBC driver, or DataSource's response, if it hangs for 10minutes, then we are waiting. You could set the JDBC timeout hint on your query, but whether the JDBC driver honors this is up to the driver. You should see the SQLException in your logs, provided your log level is warning or lower.
If you cannot fix your firewall, they you could change your connection pool settings to use a min number of connections of 0, so there will never be idle connections. But then you will be reconnecting a lot.
You could also use a third party connection pool or DataSource that supports a timeout setting on the pooled connections, or spawn a thread in your application the clears the connection pool every 30minutes.regards,
-HL

Data pump import error with nested tables

So the problem is somewhat long :)
Actually the problems are two - why and how oracle are treating OO concept and why data pump doesn't work?
So scenario for the 1st one:
1) there is object type h1 and table of h1
2) there is unrelated object type row_text and table of row_text
3) there is object type h2 under h1 with attribute as table of row_text
4) there is table tab1 with column b with data type as table of h1. Of course column b is stored as nested table.
So how do you think - how many nested tables Oracle will create? The correct answer is 2. One explicitly defined and one hidden with system
generated name for the type h2 which is under type h1. So the question is WHY? Why if I create an instance of supertype Oracle tries to adapt
it for the subtype as well? Even more if I create another subtype h3 under h1 another hidden nested table appears.
This was the first part.
The second part is - if I do schema export and try to import it in another schema I got error saying that oracle failed to create storage table for
nested table column b. So the second question is - if Oracle has created such a mess with hidden nested tables how to import/export to another
schema?
Ok and here is test case to demonstrate problems above:
-- creating type h1 and table of it
SQL> create or replace type h1 as object (a number)
2 not final;
3 /
Type created.
SQL> create or replace type tbl_h1 as table of h1;
2 /
Type created.
-- creating type row_text and table of it
SQL> create or replace type row_text as object (
2    txt varchar2(100))
3 not final;
4 /
Type created.
SQL> create or replace type tbl_row_text as table of row_text;
2 /
Type created.
-- creating type h2 as subtype of h1
SQL> create or replace type h2 under h1 (some_texts tbl_row_text);
2 /
Type created.
SQL> create table tab1 (a number, b tbl_h1)
2 nested table b
3 store as tab1_nested;
Table created.
-- so we have 2 nested tables now
SQL> select table_name, parent_table_name, parent_table_column
2 from user_nested_tables;
TABLE_NAME                     PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
SYSNTfsl/+pzu3+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"
TAB1_NESTED                    TAB1
B
-- another subtype of t1
SQL> create or replace type h3 under h1 (some_texts tbl_row_text);
2 /
Type created.
-- plus another nested table
SQL> select table_name, parent_table_name, parent_table_column
2 from user_nested_tables;
TABLE_NAME                     PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
SYSNTfsl/+pzu3+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"
SYSNTfsl/+pz03+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H3")."SOME_TEXTS"
TAB1_NESTED                    TAB1
B
SQL> desc "SYSNTfsl/+pzu3+jgQAB/AQB27g=="
Name                                      Null?    Type
TXT                                                VARCHAR2(100)OK let it be and now I'm trying to export and import in another schema:
[oracle@xxx]$ expdp gints/xxx@xxx directory=xxx dumpfile=gints.dmp logfile=gints.log
Export: Release 11.2.0.1.0 - Production on Thu Feb 4 22:32:48 2010
<irrelevant rows skipped>
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "GINTS"."TAB1"                                  0 KB       0 rows
. . exported "GINTS"."SYSNTfsl/+pz03+jgQAB/AQB27g=="         0 KB       0 rows
. . exported "GINTS"."TAB1_NESTED"                           0 KB       0 rows
. . exported "GINTS"."SYSNTfsl/+pzu3+jgQAB/AQB27g=="         0 KB       0 rows
Master table "GINTS"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
******************************************************************************And now import. In order to create types transformation of OIDs is applied and also remap_schema
Although it fails to create the table.
[oracle@xxx]$ impdp gints1/xxx@xxx directory=xxx dumpfile=gints.dmp logfile=gints_imp.log remap_schema=gints:gints1 transform=OID:n
Import: Release 11.2.0.1.0 - Production on Thu Feb 4 22:41:48 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Release 11.2.0.1.0 - Production
Master table "GINTS1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "GINTS1"."SYS_IMPORT_FULL_01": gints1/********@xxx directory=xxx dumpfile=gints.dmp logfile=gints_imp.log remap_schema=gints:gints1 transform=OID:n
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"GINTS1" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TYPE/TYPE_SPEC
Processing object type SCHEMA_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE:"GINTS1"."TAB1" failed to create with error:
ORA-02320: failure in creating storage table for nested table column B
ORA-00904: : invalid identifier
Failing sql is:
CREATE TABLE "GINTS1"."TAB1" ("A" NUMBER, "B" "GINTS1"."TBL_H1" ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60);   I_O VARCHAR2(60);   c DBMS_METADATA.T_VAR_COLL;   df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS";   c(1) :=   DBMS_METADATA.GET_STAT_COLNAME('GINTS1','TAB1_NESTED',NULL,'TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"',1); DBMS_METADATA.GET_STAT_INDNAME('GINTS1','TAB1_NESTED',c,1,i_o,i_n);   INSERT INTO "
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60);   I_O VARCHAR2(60);   c DBMS_METADATA.T_VAR_COLL;   df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS";   c(1) :=   DBMS_METADATA.GET_STAT_COLNAME('GINTS1','TAB1_NESTED',NULL,'TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H3")."SOME_TEXTS"',1); DBMS_METADATA.GET_STAT_INDNAME('GINTS1','TAB1_NESTED',c,1,i_o,i_n);   INSERT INTO "
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "GINTS1"."SYS_IMPORT_FULL_01" completed with 4 error(s) at 22:41:52So any idea how to make export/import of such tables?
TIA
Gints

Tom Kyte has said it repeatedly ... I will repeat it here for you.
The fact that Oracle allows you to build object tables is not an indication that you should.
Store your data relationally and build object_views on top of them.
http://www.morganslibrary.org/reference/object_views.html
If you model properly, and store properly, you don' have any issues.

Urgent Help Please, Error with Nested Table

Hello All,
I'm trying to create data mining models based on some medical data. I have combined two tables (Patients) and (tumors) into one table (cancer_patients). In the (cancer_patients) table there is one column (tumors) as nested table column. So I got the following error (ORA-22913) about the nested table. I need an advice about how to fix this error in ODM please
This is the code of the tables
CREATE TABLE "DSS2_MINING"."PATIENTS"
   (     "PATIENT_ID" VARCHAR2(10 BYTE) NOT NULL ENABLE,
     "REGISTRY_ID" NUMBER(10,0),
     "RACE" VARCHAR2(2 BYTE),
     "***" VARCHAR2(1 BYTE),
     "BIRTHDATE_YEAR" NUMBER(4,0),
     "NUMBER_OF_PRIMARIES" NUMBER(1,0),
     "VITAL_STATUS_RECORD" VARCHAR2(1 BYTE),
     "CAUSE_OF_DEATH" VARCHAR2(5 BYTE),
     "SURVIVAL_TIME" VARCHAR2(4 BYTE),
     "SURVIVAL_TIME_FINAL" NUMBER,
     "SURVIVAL_VARIABLE" VARCHAR2(1 BYTE),
      CONSTRAINT "PATIENTS_PK" PRIMARY KEY ("PATIENT_ID");
CREATE TABLE "DSS2_MINING"."TUMORS"
   (     "TUMOR_ID" NUMBER NOT NULL ENABLE,
     "PATIENT_ID" VARCHAR2(10 BYTE),   -- FK
     "SEER_RECORD_NUMBER" NUMBER,       -- This column contain a sequance number of the records for each patients
     "MARITAL_STATUS" VARCHAR2(1 BYTE),
     "AGE" NUMBER,
     "DATE_OF_DIAGNOSIS" DATE,
     "HISTOLOGY_GROUP" VARCHAR2(2 BYTE),
     "BEHAVIOR" VARCHAR2(1 BYTE),
     "GRADE" VARCHAR2(1 BYTE),
     "DERIVED_AJCC_STAGE_GROUP" VARCHAR2(2 BYTE),
     "STAGE_OF_CANCER" VARCHAR2(2 BYTE),
     "RADIATION" VARCHAR2(1 BYTE),
     "CS_SCHEMA" VARCHAR2(2 BYTE),
     "FIRST_PRIMARY_IND" VARCHAR2(1 BYTE),
     "TUMOR_SIZE" NUMBER(4,1),
     "TUMOR_EXTENSION" VARCHAR2(2 BYTE),
     "LYMPH_NODES" VARCHAR2(1 BYTE),
     "NODES_POSITIVE" NUMBER,
     "ESTROGEN" VARCHAR2(3 BYTE),
     "PROGESTERONE" VARCHAR2(3 BYTE),
     "SURGERY" VARCHAR2(2 BYTE),
      CONSTRAINT "TUMORS_PK" PRIMARY KEY ("TUMOR_ID");
create or replace type tumor_object AS
object(
tumor_id VARCHAR2(1),
marital_status VARCHAR2(1),
age NUMBER(3),
date_of_diagnosis DATE,
cs_schema VARCHAR2(2),
histology_group VARCHAR2(2),
behavior VARCHAR2(1),
grade VARCHAR2(1),
first_primary_ind VARCHAR2(1),
tumor_size NUMBER(4,   1),
tumor_extension VARCHAR2(2),
lymph_nodes VARCHAR2(1),
nodes_positive NUMBER(4),
surgery VARCHAR2(2),
radiation VARCHAR2(1)
create or replace type tumor_table as table of tumor_object;
CREATE TABLE "DSS2_MINING"."CANCER_PATIENTS"
   (     "PATIENT_ID" VARCHAR2(10 BYTE) NOT NULL ENABLE,
     "RACE" VARCHAR2(2 BYTE),
     "***" VARCHAR2(1 BYTE),
     "NUMBER_OF_PRIMARIES" NUMBER(1,0),
     "TUMORS" "DSS2_MINING"."TUMOR_TABLE" ,
     "VITAL_STATUS_RECORD" VARCHAR2(1 BYTE),
     "CAUSE_OF_DEATH" VARCHAR2(5 BYTE),
     "SURVIVAL_TIME_FINAL" NUMBER,
     "SURVIVAL_VARIABLE" VARCHAR2(1 BYTE),
      CONSTRAINT "CANCER_PATIENTS_PK" PRIMARY KEY ("PATIENT_ID")
   NESTED TABLE "TUMORS" STORE AS "TUMORS_STOR_TABLE"Then, I have transferred the data using
INSERT
INTO CANCER_PATIENTS
SELECT PATIENT_ID,
          RACE,
          NUMBER_OF_PRIMARIES,
           SELECT CAST(
                        COLLECT(
                                TUMOR_OBJECT(
                                             TUMOR_ID,
                                             MARITAL_STATUS,
                                             AGE,
                                             DATE_OF_DIAGNOSIS,
                                             CS_SCHEMA,
                                             HISTOLOGY_GROUP,
                                             BEHAVIOR,
                                             GRADE,
                                             FIRST_PRIMARY_IND,
                                             TUMOR_SIZE,
                                             TUMOR_EXTENSION,
                                             LYMPH_NODES,
                                             NODES_POSITIVE,
                                             SURGERY ,
                                             RADIATION
                        AS TUMOR_TABLE
             FROM "TUMORS" T
             WHERE T.PATIENT_ID = P.PATIENT_ID
          VITAL_STATUS_RECORD,
          CAUSE_OF_DEATH,
          SURVIVAL_TIME_FINAL,
          SURVIVAL_VARIABLE
    FROM PATIENTS PThanks
A.L
Edited by: user9003901 on Nov 30, 2010 12:23 AM

Hi
i was using AWM since 9i just because it creates OLAP metadata with a new API called CWM2, and Oracle Enterprise Manager was using a propietary API .
With AWM 10.1.0.4 building your OLAP metadata is very simple, you can define your Dimensions, cubes, measures and even you can load your data from your source system.
You can refer to the Oracle® OLAP Application Developer's Guide where you can find more information on this tool.
And relative to your error i will recommend that you build on a dimension-by-dimension basis and try to validate your OLAP Metadata.
Regards

SCCM 2012 R2 - Error with Task Sequence relating to Multicast issues

Using a copy of a working task sequence; we have deployed a new v.6.3.9600.16384 boot image with latest Intel I217-LM driver.
The task sequence runs perfectly fine, then stops after running "Setup Windows and Configmgr" task with an 0x80004005 error.
Upon examination of the smsts.log file there appears to be a problem with multicast; can anyone help?
Below is the extract of the smsts.log error:

Found this in the smsts.log;
<![LOG[==============================[ OSDSetupWindows.exe ]===========================]LOG]!><time="09:52:42.977+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1627">
<![LOG[Command line: "OSDSetupWindows.exe"]LOG]!><time="09:52:42.977+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1628">
<![LOG[Installing BOOTMGR bootsector]LOG]!><time="09:52:42.993+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="bootsector.cpp:73">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:228">
<![LOG[Set command line: "bootsect.exe" /NT60 SYS /MBR]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:731">
<![LOG[Executing command line: "bootsect.exe" /NT60 SYS /MBR]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:1123">
<![LOG[ResolveSource flags: 0x00000000]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3201">
<![LOG[SMSTSPersistContent: . The content for package LTC00011 will be persisted]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3212">
<![LOG[The package LTC00011 is found locally in the cache C:\_SMSTaskSequence\Packages\LTC00011]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3242">
<![LOG[!Directory::Exists(sNormalizedPath), HRESULT=800700b7 (e:\nts_sccm_release\sms\framework\core\ccmcore\path.cpp,156)]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="path.cpp:156">
<![LOG[Setting hive location to "C:\_SMSTaskSequence\OSD\Vista\Windows\System32\SMI\Store\Machine"]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:812">
<![LOG[Loading existing answer file "C:\_SMSTaskSequence\unattend.xml"]LOG]!><time="09:52:45.865+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="xmlanswerfile.cpp:578">
<![LOG[Adding "C:\_SMSTaskSequence\drivers" to plug and play driver path.]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="xmlanswerfile.cpp:1894">
<![LOG[Getting namespace "Microsoft-Windows-PnpCustomizationsWinPE" for architecture "amd64"]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="smiinterface.cpp:222">
<![LOG[Writing configuration information to C:\_SMSTaskSequence\unattend.xml]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:860">
<![LOG[Successfully saved configuration information to C:\_SMSTaskSequence\unattend.xml]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:925">
<![LOG[Successfully initialized driver information]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1205">
<![LOG[Command line for extension .EXE is "%1" %*]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:228">
<![LOG[Set command line: "C:\_SMSTaskSequence\Packages\LTC00011\SOURCES\SETUP.EXE" "/unattend:C:\_SMSTaskSequence\unattend.xml" /noreboot]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924"
file="commandline.cpp:731">
<![LOG[Executing command line: "C:\_SMSTaskSequence\Packages\LTC00011\SOURCES\SETUP.EXE" "/unattend:C:\_SMSTaskSequence\unattend.xml" /noreboot]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924"
file="commandline.cpp:827">
<![LOG[Process completed with exit code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:1123">
<![LOG[Windows Setup completed with exit code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1526">
<![LOG[ReleaseSource() for C:\_SMSTaskSequence\Packages\LTC00011.]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3564">
<![LOG[reference count 1 for the source C:\_SMSTaskSequence\Packages\LTC00011 before releasing]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3574">
<![LOG[Released the resolved source C:\_SMSTaskSequence\Packages\LTC00011]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3612">
<![LOG[exitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,440)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="setupwindows.cpp:440">
<![LOG[Windows setup failed, code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="3" thread="1924" file="setupwindows.cpp:440">
<![LOG[setup.run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="setupwindows.cpp:1650">
<![LOG[Exiting with code 0x80004005]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1696">
<![LOG[Process completed with exit code 2147500037]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:804">
<![LOG[Failed to run the action: Setup Windows and ConfigMgr.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:895">
<![LOG[MP server http://Darwin.ltcharity.org.uk. Ports 80,443. CRL=false.]LOG]!><time="10:00:45.321+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="10:00:45.337+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="10:00:45.353+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="10:00:45.434+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="10:00:45.436+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="10:00:45.444+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: Darwin.ltcharity.org.uk:80 CCM_POST /ccm_system/request]LOG]!><time="10:00:45.444+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8939">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:807">
<![LOG[Let the parent group (Setup Operating System) decides whether to continue execution]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="instruction.cxx:1004">
<![LOG[Let the parent group (Install Operating System) decide whether to continue execution]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="instruction.cxx:254">
<![LOG[The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:217">
<![LOG[Failed to run the last action: Setup Windows and ConfigMgr. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="engine.cxx:213">
<![LOG[MP server http://Darwin.ltcharity.org.uk. Ports 80,443. CRL=false.]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="10:00:45.522+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="10:00:45.522+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: Darwin.ltcharity.org.uk:80 CCM_POST /ccm_system/request]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="10:00:45.570+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8939">
<![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="10:03:20.975+480" date="03-25-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:860">
So according to this log "Windows setup failed, CODE 31", Which then produced the more generic 8004005 error.

Programmatically determine step count with nested sequences

I have a program that uses the count of steps in a sequence to determine progress. I currently use a sequence pointer to call GetNumSteps for each group. What would be the best way to expand this to handle subsequences? In other words, if I have a top level sequence with 5 main steps, 0 setup and 0 cleanup but one of the steps is a sequence call and that sequence has 10 main steps, 0 setup and 0 cleanup steps, I want the count to be 15 and not 5. Thanks.
-G-
-G-

Steve is correct, you would have to set this up using recursion where you count steps and also go into sequence calls to count their steps as well. There is no native way to do this in TestStand, you would have to program this with your language of choice and call that recursive function.
Brandon Vasquez
Applications Engineer
National Instruments
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

No Audio in Master Sequence with nested sequences

I have tried searching for a solution but cant find anything the same as this.
I have several sequences with multi track edits in them (not multi camera but on diffeent video and audio tracks)
I have dropped these sequences into a master sequence, they line up perfectly, but when I play them, the video is fin, but there is no audio. the individual sequences have audio without any probelm.
I have not done any audio editing in the sequences yet, just assembled the visual edit with the orignial audio tracks attached.
I klnow I must be missing a step or doing something wrong, but can't figure it out!
thanks
A

Not muted. All plays well in Source Monitor but dragging from Source to Timeline only brings video. Same for dragging from Project to Timeline.
This morning I tried "New sequence From Clip" on a sequence from the Project Window. This works but then requires an extra step of copying from the newly generated Sequence to my "Master" sequence. Intuitively it seems like the other methods should work. I should be able to Import project files containing all the required sequences and then from the Project window drag each of those sequences to a master timeline. Am I incorrect in my assumption on this workflow?

How to run SequenceFilePostStepFailure model callback after step failing with nested sequence calls

Hi,
I would like to pop up a message box immediately on any test failures. I had thought I could use the SequenceFilePostStepFailure model callback to achieve this,but when I modify the process model callback to achieve this, I've found that the callback code is executed only for step failures of the top level sequence file.
My test code has mutiple sequence files being called before getting down to the granularity of the basic numeric limit test that will pass or fail, so I'd like to execute the SequenceFilePostStepFailure callback immediately at that level. I can achieve this by adding a SequenceFilePostStepFailure callback override in the sequence file in question, but I'd prefer to use the default model callback implementation so I don't have to find all the places where numeric limit tests are executed and cause the DUT to pass/fail.
I've attached some example sequences that I hope illustrate the problem.
Thanks for the help,
Daniel
Solved!
Go to Solution.
Attachments:
TestCode.zip ‏55 KB

My fault, I see now that the model callback I should have modified is the ProcessModelPostStepFailure. Problem solved.

Massive problems with nested multi-cam sequences

Hey all,
I'm absolutely pulling my hair out over some issues I'm having and hope somebody out there might have an answer. I'm creating a short interview project, including interviews of two people individually, with two separate cameras and external sound capture. My goal is to cut between their separate answers to each question. For each interview I created a multi-cam sequence within its own timeline. Then, in my master sequence, I used the source monitor to pull out the specific clips from each interview sequence which I wanted to include, and assembled them into the master timeline.
I'm having two difficulties. First, for whatever reason, I'm experiencing audio glitching when the cuts between sequence clips occur. The glitch is like an audio "scramble," lasts about a half second, plenty of time to be distracting and detract from the whole of the project. There are no such audio glitches present when viewing the interview sequences specifically. I had applied effects to the audio tracks both within the interview sequences and the master sequence. I've since disabled every effect but the problem persists, and it is still present upon rendering the master timeline. I have absolutely no idea what to do about this.
The second issue is more general. I've got my media cache on an internal SSD, and I'm pulling my media from an internal HDD, with Premiere Installed on a different SSD with my operating system. The two interview sequences play back wonderfully, no delays whatsoever. The master timeline, however, with all the clips extracted from the interview sequences, plays slow as molasses. It takes 10-15 seconds for the play head to even start moving once I click 'play', which has made this entire process excruciatingly difficult. Is this a known issue? Why would my performance be so completely degraded working with nested sequences? Isn't everything referencing the exact same files?
Ugh, long night working on this. Thank you for any help.

Well, I've come up with a terrible, but comical solution for the second issue which doesn't involve reworking anything. It turns out that, upon launching premiere, I can play the master sequence with nested multi-cam sequences a grand total of ONCE with minimal delay. If I stop the play through, then it will take 3-4 minutes to get the sequence playing again. Of course, the Premiere decides to hang when I try to close it after playing this master timeline, so I'm finding that I can inch my way through this project by (1) launching premiere, (2) playing the master sequence, (3) make the edits I need, (4) forcibly crash Premiere, and (5) relaunch Premiere and repeat. It's a terrible way to work, but the project is so close to completion that I'm willing to suffer through it.
As to issue 1, I've taken each offending clip, extending the audio track one or two frames in the beginning of each clip, and then use those frames to ramp the volume up from silent to 0db. This seems to avoid the brief moment of distortion at the beginning. Notably I did try your suggestion by going back to the original, source audio, but I was still getting the same issue. My work-around is the only solution I've been able to come up with.

Media Encoder CC 2014 using cached versions of Precomps in AE and Nested Sequences in Premiere?

I'm seeing this weird thing where Media Encoder is using older versions of certain assets when exporting a Premiere Pro CC 2014 sequence. I'm seeing issues with nested sequences...Media Encoder uses an old version of a linked AE comp or it doesn't render a certain video track. With linked AE comps...I'm seeing Media Encoder use an earlier version of a precomp within the main comp.
When I look at the video in the Export Settings dialogue in Media Encoder, the old version of the AE comp shows .
If I look at the Export Settings dialogue in Premiere, it's up to date and looks right.
Anyone dealing with this or found a workaround? Thanks!
Calvin

I don't think I'd call this issue expected behavior...at best it's anticipated behavior that's going wrong. The only reason I wouldn't call it expected behavior is because what I'm seeing is AME reverting to a cached state on a FRESH LOAD of a sequence to render directly from Premiere. Basically, AME isn't open...sequence looks fine in PPro...load into AME via PPro export...look at export settings dialog in AME and note that the sequence is the old/cached version. So, it's not like the export was already in AME and THEN I made changes in PPro. It appears AME might be incorrectly identifying the newly imported sequence for export as an older, cached version.
However, I didn't get a chance to test your original solution so I'll try that the next time I see it happen. I also fixed the issue by clearing out the media cache and databases. NOT an elegant solution at all and TOTAL overkill...but it did work.
Thanks for the links!

Errors with nested sequences

Similar Messages

Maybe you are looking for