Errors with the global conversion rule

Hi Guys,
When I activate the DSO,I get an error "Errors with the global conversion rule".I applied OSS note 1387854.But the problem still persists.I did not find any replies on SDN for this error,so posting it again.
If anyone knows how to proceed,please help! <REMOVED_BY_MODERATOR>
Thanks,
Sri
Edited by: Pravender on Dec 9, 2010 4:51 PM

the error might show due to which infoobject this error is happening.
that particular infoobject might conatin a transfer routine. Open the transfer routine in the infoobject, do a dummy change, save the routine and activate the infoobject, then try activating the DSO.
this might do the trick . Hope this helps.
rgds, Ghuru

Similar Messages

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,

Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes.

Error in global conversion rule for InfoObject 0INCOTERMS2

When I activate BI content 2LIS_12_VCITM with transfer rule, The transfer rule was error with the message " Error in global conversion rule for InfoObject 0INCOTERMS2" and Mgs No. 263.
The transfer rule cannot be activated.
I checked the 0INCOTERMS2 infoObject . The global conversion rule is no error.
The global conversion is in below.
============================================================
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0INCOTERMS2(000028) TYPE C.
Conversion rule for InfoObject 0INCOTERMS2
    Data type       = CHAR
    ABAP type       = C
    ABAP length     = 000028
FORM CONVERT_0INCOTERMS2
USING    RECORD_NO LIKE SY-TABIX
           SOURCE_SYSTEM TYPE RSA_LOGSYS
           IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0INCOTERMS2 " InfoObject value
           RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line        -
TRANSLATE RESULT TO UPPER CASE.
$$ end of routine - insert your code only before this line         -
ENDFORM.
=================================================================
If you have any idea or face the similar problem, please suggest solution.
Thank you.

Good afternoon,
If you have not done so already can you apply the SAP note 1387854 in your system and it should prevent the problem from happening again. If you also reactivate the infoobject 0INCOTERMS2 in RSD1 then it should be possible to manually activate the transfer rule.
Best Regards,
Des

Error in Global Conversion rule for InfoObject

Hi Gurus,
I am working on SAP NetWeaver 2004s BW 7.0, I have extracted the SD cube 0SD_C03(sales overview) content from the business content and noticed the infoobject's transfer rules are not active and when i tried to active them i am getting the following error "Error in global conversion rule fro infoObkect 0DOC_CATEG"
"NO PSA exits for the infoObject 0DOC_CATEG"
Please help me to resolve the problem.
Thanking you
Mrudul.

Hi,
This solution of dummy change in routine worked for me.
Thanks!!!
Regards,
Rohit
Edited by: Rohit Chhaparwal on Feb 23, 2010 12:18 PM

Error in global conversion rule for 0DOC_CATEG

Hi Friends,
My transfer rules are inactive for 2LIS_11_VAITM. When i tried to get activate i am getting the below error message...
Error in global conversion rule for 0DOC_CATEG
How i can activate the transfer rules.
is there any global routine for this infoobject.
Please suggest a solution.
Thanks & Regards,
Anand

Hi Reddy,
Goto Change mode of the info object 0DOC_CATEG. Just edit the description of 0DOC_CATEG by adding a "." and activate it.
Again change the description by removing the "." and activate the info object.
After doing this, activate the transfer rules. It'll work fine.
-- Selva

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

You can ONLY use the itunes store of your country of residence ( proven by the billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
You would have to live in the U.S and physically be located in the U.S in order ot use the U.S tunes store. The same is true for each countrys itunes store.

Error with the assosication

I am getting follwoing error with the Assosiations. Please anybody let me know how to solve.
Error: oracle.apps.ar.hz.components.contact.server.HzPuiContactCRoleAS: The association end(s) do not specify an attribute.

See http://forums.adobe.com/thread/771689?tstart=0

Error with the Package Request while uploading epub package onto ACS4.

Hi,
Error with the Package Request while uploading epub package onto ACS4.
There was an error with the Package Request::<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://localhost/packaging/Package Incorrect%20string%20value:%20'\x92Apran...'%20for%20column%20'creato r'%20at%20row%201"/>
Cheers
Vikas

See http://forums.adobe.com/thread/771689?tstart=0

Error with the Receiver JMS Adapter (Connection On-Demand feature)

Hi,
In high volume we are experiencing errors with the Receiver JMS Adapter and the connection On-demand feature:
Adapter Framework caught exception: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'.
The message status was set to WAIT.
Looks like the message is successfuly reprocess after the wait period but the ALEAUD/Akcnowledgment are not successful in the sender ECC system. (SAP -> PI - > JMS)
Any idea?
PI 7.1 EHP1
Thanks,
Martin
/people/sunil.ojha5/blog/2010/08/31/review-of-sap-pi-jms-adapter-on-demand-connection-feature
Edited by: Martin Lavoie Rousseau on Jun 3, 2011 3:21 PM

Please ensure to have specified an User and password to connect to JMS server (don't leave the fields empty).

Download error with the iTunes store

I've been trying to download All the Bird Songs of Britain and Europe from the iTunes store for the past couple days. I just get a message that says "Error with the iTunes store. Try again later." Anyone have any suggestions?

What steps have you tried to resolved it? Have you tried signing out and back into your account? If that doesn't work, contact Apple.
https://expresslane.apple.com/

Problem with the date conversion

Hi Friends,
i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system date format.
for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
Can you please provide the Function Moudle for user setting date conversion.
The funciton module is most important for us,
Thanks
Charan
Moderator message: date conversion questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

Hope this logic helps you.
DATA LF_DATE TYPE DATS VALUE '21122010'. " 21-dec-2010
DATA LF_DATE_BI(10).
WRITE LF_DATE TO LF_DATE_BI. "Now LF_DATE_BI contains the date in user format
"Now populate the value LF_DATE_BI to the screen field

Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK

Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Errors with the global conversion rule

Similar Messages

Maybe you are looking for