Errror in RFC connection between SCM ABAP stack and JAVA Stack
Hi All
we have installed SCM Abap stack and SCM java stack on same system within single database.when i create rfc connection AI_RUNTIME_JCOSERVER from SCM Java stack to SCM Abap Stack its working fine,but when i am configuring same from SCM Abap to SCM Java using SM59 its giving error.
Error Details Error when opening an RFC connection
Error Details ERROR: failed to open file G:\usr\sap\SCD\DVEBMGS00\data\sideinfo.DAT
Error Details LOCATION: SAP-Gateway on host OPS20SCD1.Octal.pet / sapgw00
Error Details CALL: fopen
Error Details COMPONENT: SAP-GW-LIB (ReadSideInfo)
Error Details COUNTER: 1854
Error Details ERROR NUMBER: 2
Error Details ERROR TEXT: ENOENT: No such file or directory OR: The system cannot find the fi*
Error Details MODULE: gwxxside.c
Error Details LINE: 274
Error Details RETURN CODE: 451
Error Details SUBRC: 0
Error Details RELEASE: 701
Is it compulsory to create RFC connection between abap and java installed on the same system.
plese suggest.
Regards
to configure acceptance of the ABAP (integrated ITS / WebGUI) saplogonticket on the java stack, just log into the java stack (http://FQDN:50xxx/nwa) and select configuration THe last item in the list is Trusted System... click.
on the ensuing page, click on the add trusted system button --> by querying trusted sytem.
Enter the required data on the page:
system type: ABAP
host name: FQDN
System Nr: your instance number
client (of the productive client)
and a username and pw with superuser priveliges in the system (SAP_ALL/SAP_NEW, etc).
the click next
On the final screen, click finish.
You have now SSO setup between the ABAP and Java stacks. To configure SSO to accept java saplogontickets on ABAP see:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b0310d6-0801-0010-3185-b2371a280372
This should resolve your question.
Similar Messages
-
Hi,
can anybody give me a clear idea regarding ABAP stack and Java Stack.
1. What is the concept of these both with respect to BI 7.0.
and explain with an example as i dont have any idea about these.
2. When these are used?
Thanks in advance,
Vijaya.Hi,
Pls check these threads discussing the diff:
https://www.sdn.sap.com/irj/sdn/thread?threadID=153727
https://www.sdn.sap.com/irj/sdn/thread?threadID=89916
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="https://weblogs.sdn.sap.com/pub/wlg/6555">you</a>?
Deadline: June 15th -
PI Pipeline Doubt : Pipeline Steps in ABAP stack and JAVA stack
Hello
Can anyone please assist me with which stages steps of the PI Pipeline are executed on the Java or the ABAP stack.
Receiver Determination
Interface Determination
Message Split
Message Mapping
Technical routing
Call Adapter
Also can anyone please provide links relating to the PI architecture diagram describing it from ABAP and Java Stack Perspective and not from the Components perspective i.e. Integration Repository and Directory.
Thanks.
KiranHi
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Message, Java & XSLT (under Imported Archives) mappings are executed at Java stack;
ABAP & XSLT (in ABAP stack) mappings are executed at ABAP stack.
PI Architecture look threads
Architecture
/message/5802842#5802842 [original link is broken] -
Whats the difference between ABAP stack, ABAP+Java stack and Java stack
Hello,
I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
Also can we apply the ABAP support packs through JSPM.
Please put some light on this.
Thank youHi Zaheer
ABAP Stack
AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
business objects using Search and Classification (TREX). SES accesses Search and
Classification (TREX) functions through the Search and Classification (TREX) ABAP
client. SES replicates the business objects from the ABAP application to Search and
Classification (TREX), so that it can apply Search and Classification (TREX) search
functions to them. When a user enters a search query, the Search and Classification
(TREX) system responds to it, not the database for the ABAP application. For more
information, see the document Installation Guide SAP NetWeaver TREX Single Hosts /
Multiple Host.
Java stack
AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
capabilities of AS Java are:
J2EE Engine a J2EE 1.3-compliant application server for running enterprise
applications. In addition to the pure J2EE standard technologies, the J2EE
Engine implements complementary technologies, such as Web Dynpro or Web
Services, that are targeted at supporting large-scale, real-business application
development projects.
SAP Composite Application Framework Core (CAF Core) is a service-oriented
architecture for building and deploying composite applications. It enables
modeling of different service types entity services that represent a domain
model, application services that implement business logic, and external
services that offer connectivity to back-end services by means of remote
function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
Core runtime environment, while design time tools are part of the SAP
NetWeaver Developer Studio.
Web Dynpro is the user interface technology for developing professional
business applications for mobile as well as for desktop clients. Web Dynpro
applications can easily be integrated into SAP NetWeaver Enterprise Portal,
providing a unified layout for the end user as well as enhanced navigation
support. Web Dynpro also allows, for example, the development of interactive
forms using the Adobe document services.
Adobe document services is a set of runtime services that provide a range of
form and document creation and manipulation functions such as:
Converting XML form templates (created using Adobe LiveCycle Designer)
to PDF and various print formats
Setting Adobe Reader rights to enable users to fill in and annotate forms,
save and print them locally, and include digital signatures for authentication
using the free Adobe Reader software
Extracting data from SAP applications into Interactive Forms and transferring form data
back into SAP applications using XML
ABAP + Java Stack
Contains both functionalities.
I hope this helps
Regards
Chen -
ABAP STACK and JAVA STACK certificates
Hi Fiends,
I have requirement in which I want to use HTTP adapter to send message and apply security certificate. I got from sdn that if I wan to use http adapter with certificate than I have to install certificates in ABAP stack.
My problem is I had one scenario in which I am using BC adapter to send message with security certificate and for that I had applied certificates in java stack and its working properly.
My question is,
Is it possible to use Java Stack and ABAP STACK together..?
I mean is it possible to implement both of the above scenario in same xi system?Hi Soni,
You cannot use the same certifcates wihch you installed in Java stack with abap stack. You need to install separealy on teh abap stack.
For HTTP communication you dont need to install certificates. You only need when you want to use HTTPS communication. So if you want to use HTTPS communication and want to use SOAP adapter then you can use ther certifcates which is already installed on java stack. But if you want to use HTTP adapter then you need to install in ABAP stack.
Please see this hlep on how to install on the java stack and the process behind it:
http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf
Also check this help:
http://help.sap.com/saphelp_nw04/helpdata/de/14/ef2940cbf2195de10000000a1550b0/content.htm
on abap stack check seshus response:
HTTPS enabling
Regards,
---Satish -
Where to see the abap stack and java stack.
Hi..
I have installed ECC6.0 ABAP+JAVA engine.
I would like to know the stack level of my system. for this how i have to check. If so please mention the path how to check, Is there any R/3 level command or O/s level command to check these stack status.
Previously TCODE SPAM is used to see the Support Pack level of ABAP or Basis or any other OCS packages.
I would like to know the difference of the stack level and the support pack.
Regards,
Bhaskar
Edited by: bhaskar1818 on Feb 22, 2010 11:17 PMYou can also check Java Stack info @ the file system level at:
/usr/sap/<instance>/j2ee/cluster/dispather or server<n> and check version.txt
Cluster-Version: 7.00 PatchLevel 56084.450
Build-On:Tuesday, March 10, 2009 10:37 GMT
Perforce-Server:
Project-Dir:JKernel/NW04S_14_REL
JKernel Change-List:56084
Build machine:SAPInternal
Build java version:1.3.1_18-b01 Sun Microsystems Inc.
SP-Number: 14
Shows that its 7.00/SP14.
Hope it helps.
REgards,
Snehal -
Deleting error messages in ABAP stack and JAVA stack
Hello,
found some useful answers here about deleting messages
which are successfully delivered!
What I miss is an answer about:
a) Error messages in RWB
In Component monitoring -> Archiving you can plan a job to delete messages in status "successful" or "Cancelled with errors".
To cancel jobs you have to do this one by one. With reaction time from page manual cancellation needs hours for 100 messages (Ok, there is a multiple selection button you can use to tag per list screen!).
Now I have lots of message here
- System error
- to be delivered
- cancelled with errors (from system, special case, see next question)
ready to be erased (yes, sure about that!)
Is this the only way here to proceed?
Other question: looks like there is a default time frame for the job which looks like it is more than two months for "successful". "Cancelled with errors" is only deleted from list when reaching this status with the available button "Cancel" but not for messages with status "Cancelled with errors" set by the system.
Any chance to change that time frame.
And what about the messages "Cancelled...." by the system?
b) ABAP stack
OK, delete job is running. But looks like there is a default time frame "delete older than 2 months" (different from a! where it is more than 2 months)
I tried to delete some error messages with function "Cancel message with errors".
Now these messages are cancelled in SXMB_MONI (displayed with different status sign "Pencil").
Starting deletion job has no effect on them. Why? Because they are cancelled today and are not considered by the time frame of the deletion job?
Any help is appreciated!
(This tool is confusing me more and more! )
Hm, looks like nobody knows about this issue?
Regards
DirkHi Dirk,
I am also facing the issue for deleting the messages with errors or if i have cancelled them.
Did you find any solution for these issues. Kindly let me know if you have find out any solution.
thanks
Gopesh -
Abap and java stack together gives error message...
I am trying to install abap stach and java stack together.
I installed abap was without problem but when I install Java i get the error below.
I tried SP09 and since it didnt work Sp07 also since I had it with me downloaded before.
Any help ??? Got stuck
I need to install together to practice webdynpro...
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
George
INFO 2006-11-30 15:10:12
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
ERROR 2006-11-30 15:10:14
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
INFO[E] 2006-11-30 15:10:13
FSL-02077 File system export (share) saploc does not exist.
ERROR 2006-11-30 15:10:14
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
THis error was gone when I used the registry cleaner for removing ABAp stack But now question is How do I install BOTH????
May be the instance number is the problem....
In old version of ABap stack we can enter the instance number .But not in SP 9 .Can we change here too?
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
This file holds the Key of the errors since it checks for the instance number which is given in the log as details.. May be we can change it....
In ABap STack install instead of files as in SP 07 they have created an image and may be this si the reason that
we cannot customize.I have to find a way in order to install it...i found soltuion myslef THe lates WAS for abap is preconfigured and so its not suitable for abap-java multiple installation
-
Connectivity issue between ABAP and JAVA stack
Hi All
we are facing the following issue while running interface. message got failed while processing Graphical mapping in Java stack. Can any one please help us what could be the issue here? Is there anything we missed from Config / XI development.
This message was failed with not more than 200 MB file.
XIServer
JCO_SYSTEM_FAILURE
connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
"SYSTEM FAILURE" during JCo call. connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
A
Appreciate your quick response.Hi Yadagiri,
Please check the reply from Carlos in the below thread
Re: increasing heapsize of java on WINDOWS 2003
Also check your sm59 RFC destination, i guess there is some problem.
Delete AI_RUNTIME_JCOSERVER(RFC connection between the Java engine and the ABAP engine) and create it again.
Hope tht will resolve ur issue...
Regds,
Pinangshuk. -
How to connect separated ABAP and Java stacks ?
Hi,
I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
As per my understanding, only JCO RFC is the mean of communication between ABAP and Java stacks.
But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
J2EE stack's status from smicm (ABAP).
Would you please suggest me, if there is any more configuration to be done on abap or Java stack side.
Thanks,
Cheers !!!
AshishHi Sunny,
JCO RFC is tested and it is working fine. So no issues from JCO RFC side. Hope you would have read carefully.
>
Ashish Mishra wrote:
> But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
> J2EE stack's status from smicm (ABAP).
>
========================================================
Hi Anil ,
Thanks for your reply. but
>
Ashish Mishra wrote:
>
> I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
>
Hope I am able to clear your doubt. Java is completely separated stack and not add-on.
Suggest me how can I proceed further on this connectivity.
=========================================================
Hi Olivier,
I am grateful to you for your reply. I understood your point but now except a successful JCO RFC test,
is there any mean to check and ensure that both the stacks are connected properly and ready to use.
Regards,
Ashish -
Connection between SAP R/3 and SAP XI with RFC
Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Rajuhi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal -
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
Connection between CRM back end and ASP front end website for Ecommerce
Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen -
Upgrade from SCM 5.0 to SCM 7.0 without Java Stack
Hello,
My query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
MadhuHi Manoj,
Yes the system is running okay and I can login without problem. The question I have is that the upgrade program started with default system number 00 loaded, where I don't know how to change it to match our system setting. Our system is currently having system number 01.
Thanks,
Eric -
Regarding connection between front end HTML and back end SQL 7.0
Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.
Maybe you are looking for
-
How to schedule multiple imports in one time?
Hi all, I've got a simple question, which hopefully has a simple answer Is it possible in the task list (trx SCMA) to schedule imports for all attached logical systems to that maintenance cycle in 1 time, in stead of scheduling imports for each logic
-
Tracing loaded external SWF bytes
I have a file that loads 13 external Swfs into a shell. When they are all loaded, the shell plays the files in succession. That works fine, but I a trying to show the progress of the loading process, but the flash pretty much freezes until all of the
-
6.0.4 Turning off Facebook chat crashes Safari
I noticed that when I go to Facebook, it has my chat on, which I don't want. So I turn it off. When I do, Safari becomes completely unresponsive, permanently. Anyone else experiencing this? Any tips on how to solve this problem? Thanks!
-
Solution for invalid directory item count, startup disk corruption and regular crashes
Hi, My late 2006 MacBook (10.6.8) has recently started crashing quite frequently. The screen becomes dark and a multi-language dialogue appears stating that the computer must be restarted with the power button. When this occurs any audio which was pl
-
CCMS for monitoring for Message Bus RFCs in TCP/IP
Hi Can we do CCMS configured for Real-time Monitoring of RFCs of Message Bus in TCP/IP in sm59 Example: C_MES_AEP for C Cluster Q_MES_AEP for Q Cluster W_MES_AEP for W Cluster XXXX for W Cluster AFS XXXX any other MB Cluster Re