Errror Message generated at the time of Database creation

Msg 5118, Level 16, State 1, Line 5
The file "D:\POSDB\POSPRYDAT.mdf" is compressed but does not reside in a read-only database or filegroup. The file must be decompressed.
Msg 1802, Level 16, State 4, Line 5
CREATE DATABASE failed. Some file names listed could not be created. Check related errors.

http://sqlserver-help.com/2014/05/22/solution-the-file-mdf-is-compressed-but-does-not-reside-in-a-read-only-database-or-filegroup-the-file-must-be-decompressed/
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

  • Less redo generates at the time of online backup using RMAN

    Hi,
    can someone eleborate that why less redo generates at the time of RMAN online backup in comparison of manual hotbackup.
    Thanks

    A manual hot backup (aka "OS backup" or "scripted backup") cannot handle fractured blocks. This happens when a backup command is copying out blocks from a datafile at the same time as DBWR is updating blocks. The Oracle Block Size (8KB) is generally a multiple of the OS Block size (512Bytes to 4KB or 8KB, depending on the filesystem / raw device and how the OS command copies blocks out). It is possible for DBWR to write 8KB and the OS backup utility to be concurrently reading the same Oracle block as, say, two different 4KB reads. The first half of the Oracle block may be read by one OS call and the second half by another OS call -- the two halves would be inconsistent with each other if Oracle were writing the database block at the same time.
    (Therefore a restore of such a backup would give you an inconsistent -- i.e. fractured -- block, which would be logically corrupt).
    In order to handle such issues, after a BEGING BACKUP is issued, for every first change to a database block, the whole block is written to the redo stream, not just the change vectors. (If the same database block is subsequently modified while in BACKUP mode, it is only the change vectors that have to be written to the redo stream). Once the END BACKUP is issued, the redo stream does not need to capture whole database blocks.
    If such a backup is restored, it still has fractured blocks. However, when applying the ArchiveLogs generated during the Backup, each such fractured block is "automagically repaired" because a whole image is restored from the ArchiveLog. (Subsequent changes are replayed as changes through the change vectors).
    Hemant K Chitale
    http://hemantoracledba.blogspot.com

  • Enforce to send the messages pending, after the Time To Deliver is changed

    JMS Queue is being used to send data from our database to the headquarters’ database.
              Our organization considers using "Time To Deliver Override" during the scheduled downtime of the headquarters’ database. For example, when our admin is informed by the headquarters' admin that downtime is scheduled, our admin can change "Time To Deliver Override" from -1 to 1200000 (20 hrs) in WebLogic Consol. Then, when the database is back, our admin will reset the value to -1.
              It is simple and quick. However, I realized that the messages pending will not processed for the “Time To Deliver” which was configured when the message was added.
              Can WebLogic enforce to send the messages pending, after the "Time To Deliver Override" is changed back to -1?

    A few related points:
              - I think 9.x may provide mbean/JMX/administrative options to change time-to-deliver in existing messages - but, even if it does, this seems unwieldy.
              - 9.x also provides options for adminstratrively pausing delivery of a destinations messages, and/or pausing MDBs.
              - I think the "time-to-deliver override" also supports setting absolute times via cron like schedules (eg - you can configure it so messages are born at a specific time.)
              - Another option is to introduce an intermediate destination and configure a "messaging bridge" to forward messages between them. When messaging needs to be pause, administratively stop the bridge.
              Tom

  • Create warning message at the time of order creation

    I am looking for a  solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

    The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver.  If the used cost center is belongs to some other company code, said warning message should occure.
    I tried user exit, field exit, also used std message control (KO-458).  Nothing is working.

  • Is it possible to change the Global Lockout Message to include the time duration?

    Hi Everyone,
    Is it possible to edit the error messages that portal returns?
    Are they stored in a table we can just modify? Or are they
    secured?
    The one specifically that a client would like to change is:
    the error message related to the global lockout message to
    include the time that people would have to wait.
    Any ideas?
    Thanks
    tim

    Tim,
    You can change the message via an API. The code that we used is
    below:
    DECLARE
    CURSOR c_id IS
    SELECT id
    FROM wwnls_strings$
    WHERE name = 'edit_password_txt';
    v_msg LONG := 'Enter your old password and a new password.
    Confirm your new password to make sure you entered it correctly.
    Passwords are %1.'||chr(10)
    ||'Passwords must : <br>' ||chr(10)
    ||'<UL><LI> be at least 7 characters long
    </LI>' || chr(10)
    ||'<LI> not be the same as your username </LI>'
    || chr(10)
    ||'<LI> contain at least one alpha character
    </LI>' || chr(10)
    ||'<LI> contain at least one numeric character
    </LI>' || chr(10)
    ||'<LI> not be the same as your previous
    password </LI></UL>' ;
    v_id wwnls_strings$.id%TYPE;
    BEGIN
    OPEN c_id;
    FETCH c_id INTO v_id;
    CLOSE c_id;
    portal30_sso.wwnls_api.set_string      (p_id => v_id
                             ,p_text => v_msg
                             ,p_language => 'us');
    END;
    /

  • Documents generated at the time of GR

    Hi  All ,
      what all documents are generated at the time of GR
    a ) Invoice Document
    b ) Material Doc
    c ) Accounting Doc
    d ) Receipt to vendor about the material received
    ragards
    deepu

    Hi,
    While doing GR document generated or effect of GR is
    1)Material document generated
    2)accounting document gets generated if the transaction is relevant
    3)GR slip
    4)TR for ware house if applicable
    5) Inspection lot in quality if aplicable
    Regards

  • TDS line item not generated at the time of down payment vide F-48

    Dear Friends,
    Uptill 2008 the system i.e. SAP ECC5 was properly generating tds line items at the time of making down payment.From Feb I,2009 suddenly noticed that no tds line items are generated at the time of  making down payment to vendors.Inspite of my hard efforts I am unable to crack this problem.
    Any suggestions/solutions is highly solicited.
    Best Regards
    Monoj
    Edited by: MONOJ SARKER on May 4, 2009 5:57 PM

    Hi Friends,
    Tax type along with tax codes  for invioce posting and only tax type for payment postings are updated in the vendor master.At the time of advance payment when the screen pops up for updating tax code at that point tax code for payment postings are updated.
    For your in formation I would like to say uptill 2008 there was no problem in withholding tax.The problem started in early 2009.The configuration which existed during 2008 remains unchanged.Its not clear why I am unable to generate TDS line item during advance payment .
    Regards
    Monoj

  • At the time of RFQ creation dump error

    Dear All,
                        At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
    the error message is :
    Runtime errors         SYNTAX_ERROR
           Occurred on     09.09.2009 at   12:10:27
    Syntax error in program "SAPLV61A ".
    What happened?
    The following syntax error occurred in the program SAPLV61A :
    "Incorrect logical expression: Instead of "X" a field, a function or "("
    Error in ABAP application program.
    The current ABAP program "SAPLMEVA" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "SAPLV61A ".
    You can also perform the syntax check from the ABAP/4 Editor.
    If the problem persists, proceed as follows:
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    The following syntax error was found in the program SAPLV61A :
    "Incorrect logical expression: Instead of "X" a field, a function or "("
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
       To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
       To obtain this, call the system log with Transaction SM21
       and select the "Print" function to print out the relevant
       part.
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, you can either use the "PRINT" command in the editor or
       print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
    System environment
    SAP Release.............. "620"
    Application server....... "ARCHIVAL"
    Network address.......... "172.26.2.145"
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "4x Intel 80686"
    Character length......... 8 Bits
    Pointer length........... 32 Bits
    Work process number...... 0
    Short dump setting....... "full"
    Database server.......... "ARCHIVAL"
    Database type............ "MSSQL"
    Database name............ "EDP"
    Database owner........... "dbo"
    Terminal................. "cheeid92corit"
    Character set............ "English_United State"
    SAP kernel............... "640"
    Created on............... "Mar 9 2009 22:54:07"
    Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version......... "SQL_Server_9.00 "
    Patch level.............. "274"
    Patch text............... " "
    Supported environment....
    Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version..... "640"
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
    Windows NT 6.0"
    User, transaction...
    Client.............. 777
    User................ "MMCORE"
    Language key........ "E"
    Transaction......... "ME47 "
    Program............. "SAPLMEVA"
    Screen.............. "SAPMM06E 0311"
    Screen line......... 54
    Information on where terminated
    The termination occurred in the ABAP program "SAPLMEVA" in
    "ME_LOAD_VARIANTS_PRICING".
    The main program was "SAPMM06E ".
    The termination occurred in line 55 of the source code of the (Include)
    program "LMEVAU08"
    of the source code of program "LMEVAU08" (when calling the editor 550).
    Source code extract
    000250       ENDIF.
    000260   *--> Initialisieren
    000270   *--> not necessary anymore (Raimond Buchholz)
    000280   *   CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
    000290   *--> Preisteile der Varianten besorgen
    000300       CALL FUNCTION 'CEI0_GET_CONDITIONS'
    000310            EXPORTING
    000320                 INSTANCE    = I_CUOBJ
    000330                 APPLICATION = 'MM'
    000340            TABLES
    000350   *              CONDITIONS  = T_VCKEY.                 "del 194053
    000360                 CONDITIONS  = T_VCKEY                   "ins 194053
    000370            exceptions                                   "ins 194053
    000380                 error_message  = 01                     "ins 194053
    000390                 others         = 02.                    "ins 194053
    000400   *--> Preisteile der Varianten mit Belegnummer versorgen
    000410       LOOP AT T_VCKEY.
    000420         T_VCKEY-KAPPL = 'M '.
    000430         T_VCKEY-VBELN = I_EBELN.
    000440         T_VCKEY-POSNR = I_EBELP.
    000450         MODIFY T_VCKEY.
    000460       ENDLOOP.
    000470     ENDIF.
    000480
    000490   *--> Preisteile der Varianten an Preisfindung übergeben
    000500   *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
    000510   *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
    000520     IF I_NO_LOAD IS INITIAL.
    000530       DATA: I_POSNR LIKE VBAP-POSNR.
    000540       I_POSNR = I_EBELP.
          CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
    000560            EXPORTING
    000570                 APPLICATION = 'M '
    000580                 VBELN       = I_EBELN
    000590                 POSNR       = I_POSNR
    000600            TABLES
    000610                 TVCKEY      = T_VCKEY
    000620            EXCEPTIONS
    000630                 OTHERS      = 1.
    000640     ENDIF.
    000650
    000660   ENDFUNCTION.
    Contents of system fields
    SY field contents..................... SY field contents.....................
    SY-SUBRC 0                             SY-INDEX 0
    SY-TABIX 1                             SY-DBCNT 1
    SY-FDPOS 1                             SY-LSIND 0
    SY-PAGNO 0                             SY-LINNO 1
    SY-COLNO 1                             SY-PFKEY GVP
    SY-UCOMM
    SY-TITLE Maintain Quotation : Item 00001
    SY-MSGTY E                             SY-MSGID AIPLOC
    SY-MSGNO 002                           SY-MSGV1 303632
    SY-MSGV2                               SY-MSGV3
    SY-MSGV4
    Kind regards
    P.Anandhakumar

    Hi Anandhakumar,
    Debugg the transaction with help of ABAPER.
    System will show you the reason for the above error.
    Hope this should solve your problem.
    Thanks and regards 
    Gitesh

  • Process Order Batch number generation at the time of order creation

    Dear All,
    I m facing some issue at the time process order creation:
    Current Settings:
    1. Batch Number Creation at the time of order create.
    Reason for this setting: Release of order is done  by releasing operations one by one, therfore batch number will be generated on the final operation release, thats why we set up batch creation at the time of order create.
    2. For FG batch number generation there is a program that copy the SFG(in Order BOM) Batch number to FG. ITs a industry requirement.
    Problem:
    when we create FG order system generate the error message at the time of order creation tht No batch could be determine.
    Please suggest the solution
    Thanks,

    Hi
    Hope you have cretaed Batch serch strategy in COB1
    U need to maintain it as per your strategy type.

  • Error at the time of PR creation

    I am facing a Error at the time of PR creation:-
    Status "Material Inactive" of material 30001668 does not allow external procurement
    Message no. ME053
    how to active the material.

    you have a material status in your material master, either at plant level or at general level.
    Just remove the status.
    Plant level status can be found in almost any plant view,
    general level in general data view

  • IO assigned with Asset,but not coming at the time of PO creation

    Hello
    IO assigned with Asset,but not coming at the time of PO creation.
    I have made following settings:
    1     Depreciation - IFRS (INR)              1     0L
    15     Income Tax Act                             0
    20     Depreciation - Indian GAAP (INR)     3     1L
    30     Depreciation - IFRS (USD)              0
    31     Depreciation - Indian GAAP (USD)       0
    In ACSET-Account assignment:
    for dep area-20
    CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
    KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
    so currently i am using only dep area-20 only(Indian GAAP)
    CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
    AS01
    KO01
    AS02
    KO22
    KO30
    so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
    kind regards

    Hey Ajay
    thanks for your reply.....
    now i'm getting new error:
    Parallel depreciation area 31 is not posted
         Message no. AA565
    Diagnosis
         The asset to be posted does not manage parallel depreciation area 31, or
         transaction type  that you are using is limited to certain depreciation
         areas, and does not contain depreciation area 31. This is incorrect.
    System Response
         Posting is rejected.
    Procedure
         Check the asset and the transaction type.
    I have checked some configuration but not able to debug it.
    regards

  • Duplicate material entry at the time of PO creation based order type

    How Restrict duplicate material entry at the time of PO creation based on define order type.
    Moderator message: please do some research before asking.
    Edited by: Thomas Zloch on Mar 11, 2011 1:45 PM

    Hi Rahul,
    try with This Badi  ME_PROCESS_PO , Method Open or Process item,
    Implemente it and use a break-point to test it i.e it is triggred or nt , before processing it.
    Regards,
    Abhisek

  • How to over write VBBE data when Delivery is created if at the time of SO creation stock blocking is there

    Hi,
    I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
    That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
    Thanks
    Tanmoy

    Hi Tanmoy,
    This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system?

  • Manual BOM selection at the time of order creation

    Dear Experts,
    Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
    Regards,
    Krishna Mohan

    Hi karishna,
    Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
    Regards
    Muhammad Umar

  • How can add partner at the time of PO creation

    The requirement is to add an extra partner in the Purchase Order header Partner tab at the time of PO creation itself. The PO is being posted through Idoc. A custom function module has been maintained as inbound processing FM and it calls BAPI_PO_CREATE1 inside.Can anyone help me resolving the requirement?

    Using GOS ...

Maybe you are looking for