Errror message in CO11n

Dear guru,
When I am entering in a screen of CO11N system is giving me a message theat
"User interface predefined, because there is no definition in Customizing".
Message no. RU603
What custmizing setting I have to do please suggest me..
thanks!
Nilesh.

In customizing,
Production >shop floor control>operATION>CONFIRMATION>single screen entry -->Define single screen entry(OPK0)
Here define the profile and mark it as std profile. and define Area selection and defaults.
You can also copy from the existing profile...
please come back if you need help

Similar Messages

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
Answer: Yes
Then "Verifying" appears at top of screen but nothing happens.
Tiscali/Talk Talk is the provider.

Display Error Message in Co11n Transaction

Hello Experts,
I am using co11n transaction, While saving the transaction i need to display a
error message based on some conditions. I can display a error message but the screen got struck
and it is not returning to the PBO again. Can any one tell me the any Exits is available there in the transaction to display the error messages.
Thanks

Hai,
krupa, what u have to do is, u r using a screen exit right? Dont display the error message inside
the Function Exit. Instead, in the PAi module inside chain endchain of ur screen double click on your module and include the module in the TOPINCLUDE of the Main program( How to find this top include is goto se80-->
select function group XCOF--> EXPAND INCLUDE->LXCOFTOP -
>ZXCOFTOP----->DOUBLE CLICK and open it and put your module here and display ur error message. )
set the breakpoint here it will stop here
Regards,
Viverk
Edited by: vivek selvam on May 12, 2009 8:36 PM

TS1539 I get this errror message with a batch of 21 songs I bought as MP3's on Amazon, installed into Amazon Cloud, and uploaded to itunes. After that, they will NOT sync to my ipod Classic 120g. This has no happended in previous uploads using the same p

Clearly I thought I was typing my Q in here, but it loaded into the headline.
The issue is my inability to sync songs (purchased from Amazon, and downloaded with Amazon Cloud Player) to my ipod 120G Classic.
21 songs (most recent, as I buy from time to time, but have never had this problem) will not sync to ipod, but will show up in Music files/library.
The error message is -50, and I did the step-by-step procedure to update the appleipod.bat file (?) with no success.
This problem never occured before.
I have restored the ipod to original settings, deleted and reinstalled the songs many times and now have hours and hours into trying to simply get some new songs onto my ipod...
HELP!!
thanks
C
[email protected]

See this older thread for a few possible solutions.
https://discussions.apple.com/thread/3924425?tstart=30
B-rock

Office Professional Plus 2013 - Click to run fails to start - errror message "Couldn't install"

I have just purchased an new PC with 8.1, and have also purchased Office 2013 via the HUP. Now I am trying to start the download. After clicking on the link in the email, a "Click to Run" file is downloaded. When I open the file, it fails
to start the Office 2013 download. I get the message "Couldn't install"
However after trying several options including compatability and administrator options, I still get the message "Couldn't install".
I have checked for compatibility and all checks OK
I am looking forward to an ideas :)
Thanks in advance :)
Richard

Hi Richard,
Thanks for your question. I believe that "Couldn't install" is not the complete error message, it would be great that you can copy and paste the entire message here. It's necessary for the investigation.
Please first check if you have any pre-installed version (Preview edition) of Office on your PC. If yes, please try to use
Microsoft Fix It tool to remove any traces of Office from your computer, then try the installation again:
http://support.microsoft.com/kb/2739501
You might also need to follow the manually steps mentioned on the same page to delete the related reg keys/folder structures, and then try again.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

HT4557 I have music on my second Iphone, but when I hook myphone to my computer the library is empty even though there is music on the phone. When I try to add music to the phone I et an errror message that says it can not be moved because the phone can

I can not manage music on an additional device. Thephone has music from my library on it. But when I connect the phone to my computer it shows there is nothing on the phone. When I gry to add a song, I get an error message that says can not be copied to IPhone Helen(name of the phone) because it can not be found, even though it shows on the coputer

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Then proceed to do the Erase and Sync or restore the device.
B-rock

How to display errror message in a form based on a procedure

I created a single-level form based on a procedure. In this form, I would like to generate an error message inside of a custom button, so I used the following inside of that button:
p_session.set_value (p_block_name => 'DEFAULT',
p_attribute_name => '_STATUS',
p_value => 'Please choose a valid chair from the popup icon.');
Unfortunately, it returned a WWV-0000 error code without any error messages. I use that code in another single-level form based on a table/view, and it works fine, but I need a single-level form based on a procedure. Therefore, I want to know if that code snippet can be used in a form based on a procedure or not? Do we have any other ways to display error messages in pl/sql besides p_session.set_value(...);
Thanks in advance.

Somebody please response.

Errror message: file already exists - overwrite or save as?

When I attempt to open the .cp file that I had previously
worked on today I now get the following series of messages:
1. C:\Documents and Settings/vsutherl/My Documents\My
Captivate Projects\game\game2.cp already exists.
Do you want to overwrite the file or save as a new file?
When I select "Overwrite" or a File Save As, I get the
following message in response:
Adobe Captivate could not open "game2.cp" because it is
either not a supported file type or because the file has been
damaged (for example, it was sent as an email attachment and wasn't
correctly decoded).
This began happening after I attempted to click the game2.exe
file to review the project in its final (stand alone) form but
clicked the .cp file in error, which was already open.
Now all four of the projects (which were clones of each other
with simple text changes for each project) receive the same error
message. I can no longer open any of the source (.cp) files to make
additional changes. This represents *weeks* of work and I cannot
start from scratch to rebuild all four projects - again. I've
already had numerous problems with these projects (per prior posts
here).
Other projects (totally separate and apart from these 4) open
properly. However when game2.cpgot corrupted it caused all of the
other gameX.cp files to also receive the same error message;
resulting in not just one file being corrupted but all 4 even
though the problem that was originally encountered was when
attempting to (re-)open game3.cp (while already open).
How can this file corruption be overcome? I am using Windows
2000 and Captivate 3.
Help and thanks!
Vince

Another possibility, I think, is using the wrong version of
Captivate to
open the course. I see this error, or something similar, if I
attempt to
open a CP2 file in CP1. Do you have various versions of CP on
your
computer? Are you sure you're using the proper version to
open a given file?
Erik
awelendam2 wrote:
> Adobe Captivate could not open "game2.cp" because it is
either not a supported
> file type or because the file has been damaged (for
example, it was sent as an
> email attachment and wasn't correctly decoded).
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware
*The Blankenship Caveat: Note that direct linking to http
content
through any Authorware icon will likely fail if a proxy
server is present!*

Receiver File CC errror message

HI Guys,
I am working on IDOC to File scenario whre I am getting Follwing error in File sender CC in RWB.. IN SXMB_MONI IDOC message is successful
Message processing failed. Cause: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.af.app.modules.CallAdapterWithMessageBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.af.app.modules.CallAdapterWithMessageBean@4ba33360 for bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: javax.ejb.CreateException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SapXIJDBCAdapterService
Any Idea?
Thanks
Rajeev

HI,
As stated I restarted the service but still the following error exist:
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.af.app.modules.CallAdapterWithMessageBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.af.app.modules.CallAdapterWithMessageBean@58e01320 for bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: javax.ejb.CreateException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SapXIJDBCAdapterService..
In CC in short LOG its states as Functioning but the status is in RED and the error message as stated above.
Even I tried wtih giving the wrong server details but still its giving the same error instead of saying wrong server details or so!....
Any inputs?
Thanks
Rajeev
Edited by: rajeev raj on Sep 19, 2009 3:19 PM

Errror message "quicktime -3" can't open iTunes

I was in the middle of updating itunes and I got an error message that just says error message -3. I have tried to uninstall both itunes and quicktime and re-install and that was unsucessful as well. I also tried to dissable my security stuff and install then and that was unsecsefull. I need help I am dying from lack of music!!!!! help me please! I am considering becoming a monk if I can't figure this out!!!
[email protected]

Try posting in the iTunes for Windows area. You'll be more likely to get a quick and accurate answer there than you will here in the iTunes for Macintosh forum. Good luck.

How to bring the screen editable after errror message

Hi All,
I made a little validation in screen in me56 on a fixed vendor in item level.
After which I issued an error message.
I got the error message but the screen remains non-ediatble.
I need to atleast open the field FIXED VENDOR for input for the user to change the value.
Please provide me valuable inputs and this is needed very urgently.
I used the exit EXIT_SAPLMEREQ_008 / Include: zxm02u08.
Thanks in advance.
Krithika

Hi Krithika,
Whenever an error message is being displayed set a flag.
Next time just check if the flag is set before performing any other validation.
If the flag is set then skip the error message and clear the flag, and if the flag is not set then emit the error message.
But the flag should be declared in the global data of the Function POOL.
You can also check if the Function Exit EXIT_SAPLMEREQ_010 suits your requirement. In this there is a parameter called EX_MESSAGES. If you populate the error messages in this parameter the system will automatically handle the change/display mode when an error message is displayed.
Hope this helps in solving your problem.
Regards,
Abhisek.

Cannot connect to the Reporting Server errror message during installation

Hello all.
I'm trying to install BPC 7 sp5 in a two server environment, but the installation stops with the error message "Cannot connect to XXX"

Hello all.
I'm trying to install BPC 7 sp5 in a two server environment, but the installation stops with the error message "Cannot connect to . Please check report server name".
Environment:
Appserver: Win2003 R2 32 bit.
Sql server: Win2008 64 bit, Sql 2008 Server 64 bit.
Default installation of Report Server was used. So virtual directory is ReportServer. I can successfully connect to Report server from IE (http://ReportServerName/ReportServer). The installation user is a domain user and is member of the Administrators group on both servers. Ports 1433, 2383 and 80 are open.
So then I wonder if the error comes from the fact that we're using Windows 2008 as OS on sql server. Is it possible to use Win2008 on sql server?
Kind regards
Arild Bjørsvik.

Idoc errror message

Hi,
can someone tell me what the idoc error message "Status records with status 51 after status 53" and what to do to solve this error.
thank you.

51 - Application document not posted
53 - Application document posted.
Check the error using BD87 transaction.
You can get status of all idocs from this table.
TEDS2
Also you can check the same from WE02 transaction.

Firefox can't deal with links from Wash. Post. Get invalid URL errror message. Works fine on Safari, though.

The home page of the Washington Post works fine. But If I try to open a link on that page, I get the message:
Invalid URL
The requested URL "/wp-dyn/content/article/2011/03/05/AR2011030500289.html?nav=hcmodule", is invalid.
Reference #9.243b543f.1299342316.143eddb7
The above URL is not the one shown when hovering over the link.

Thanks for the solution. Worked like a charm!
EJK

HT4623 I have been trying to install my music and pictures to my Iphone 4s but it is giving me an errror message that I don't have enough access privilages for this operation. Why?

I am wondering why that I can not add my music and photos from itunes to my I phone 4s. I have been given this message : You don't have enough access privilages for this operation.

If your iPad has a passcode lock, have you tried unlocking the iPad before attempting to sync it with iTunes?
Do you have the latest version of iTunes installed on your Windows PC?

Errror message in CO11n

Similar Messages

Maybe you are looking for