Errror when activating process chain

Hi All,
Geeting the error while activing process chains in Quality.
Error is *'Node Characteristic 0classnum is not entered as hierarchy characteristic for 0material*
can any one help on this.
Thanks in Advance.
Srinivas

Hi
This is not advisable to activate a process chain in quality directly. You should do it in development and then transport it across.
This error is realated to hierarchy. Do you have a hierarchy load attached to this chain?
Check the hierarcy first. Then activate the chain.
Cheers
Chanda

Similar Messages

Short dump while activating process chain

Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump

Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain.

Sending mail to GROUP ID when a process chain fails.

Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.

hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks

Send sms when bi process chain failed

Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
Thanks

Hi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi

Activation Process Chain, Info Objects, Transformations

Hi Experts;
Is there any function or abap program, activates inactive Process Chains, Info Objects and Transformations.
Please Advice
Regards
Bilal

Hello,
Find below some activation programs used in BI.
RSDG_CUBE_ACTIVATE      Activation of InfoCubes
RSDG_DODS_REPAIR      Activation of all ODS Objects with Navigation Attributes
RSDG_ODSO_ACTIVATE      Activation of all ODS Objects
RSDG_IOBJ_ACTIVATE      Activation of all InfoObjects
RSDG_IOBJ_REORG      Repair InfoObjects
RSDG_MPRO_ACTIVATE      Activating Multiproviders
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
RRHI_HIERARCHY_ACTIVATE      Activate Hierarchies
SAP_AGGREGATES_ACTIVATE_FILL      Activating and Filling the Aggregates of an InfoCube
RS_PERS_ACTIVATE      Activating Personalization in Bex(Inactive are highlighted)
Programs for activating process chains and Transformations have not been delivered by SAP.
Regards,
Pratap Sone
Edited by: Pratap Sone on Jul 19, 2010 8:39 AM

Error while activating Process Chains

Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
Ganesh

Hi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
OSS : 511475
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
 Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
 Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
 Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.

BI Content 7.57 SP4 Activating Process Chain

Hi,
I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the errors are at below.
When i search these missing objects on the BI content these objects are not exist. Also on the BW system they are not exist. I could not find any solution for this problem.
Can you please show me a way for solving this. I am stuck on this.
I am trying to activate following Process Chain.
Technical Name: 0HCM_FULL_P0EMPLOYEE
Name : Load Data for InfoObject 0EMPLOYEE
Error 1:
Shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG cannot be expanded; chain is inconsistent
Message No. RSPC142
Diagnosis
You want to determine the objects that are source system-dependent for shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG so that they can be inserted in the modified version of the process chain or of a referencing process. This was not possible.
Error 2:
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB (Data Transfer Process,DTPA) could not be collected for object 0HCM_FULL_P0EMPLOYEE (Process Chain,RSPC)
Message No. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC have also been collected. Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA was among these objects. This object
DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA, is not, however, available in the Metadata Repository.
System Response
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA is ignored in further collections. The links for object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC are incomplete. This may result in not being able to activate this object.

Hello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list.

Error when collect process-chain

hi all,
When I collect the process-chain to transport in the transport-connection,an error occured in the below windows:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'.
Could anybody help me?
The BI is 3.5 version
Best rgds!

the system tip of the error as below:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System response
The object was not taken into account in the next stage of processing.

Error in remote call of destination - when transporting process chain

Hi all,
I have earlier not had troubles transporting process chains from development system to test. Now I get the following error
Error in remote call of destination BW Test
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination BW Test:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I know we have a transaction (RSTPRFC) where we give the password for the user that will do the activation of the PC after transport, but checking with the basis guy, and according to him there has not been any changes to this user. (As the user is the same as the RFC user used when setting up source systems). Running a check on the source systems from RSA1 gives green on all, so then the user should be correct...
(there is also no short dump available in the other system)
Does anyone have a clue on what could be done to locate the error..?
Thanks
Regards,
Øystein

Hi,
you are both right, and I got the issue corrected. In SM59 i have an ABAP connection that when checking it, gave me a logon error. When getting this connection working (by giving another password) and then setting the same password in RSTPRFC, the transport worked.
I'm just not sure I understand why this became an issue.
But anyway, thanks for the input.
Regards,
Øystein

Invalid DataStore object name error when running process chain after EHP1

Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
Al

Hi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
       particular PSA table for finding the inconsistencies.
2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
      PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
     double check that the invalid partitions are
     corrected.
     Once this is done you can execute the report
     'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

BI Admin Cockpit - Problem in activating Process Chains

Hello,
We're trying to activate the content for BI Admin Cockpit.
While activating the process chains, we get a "red" message as
mentioned below.
"Object '0PAK_5JTN7F5HTP45CGZ04PQTMCNTI' (ISIP) of type 'InfoPackage'
is not available in version 'D'
Message no. RSO252"
OSS message 966131 suggests that "The InfoPackages mentioned are shadow
InfoPackages and the message is unnecessary because there should not
have been a search for the package at all." and we should apply the
correction (as part of SPS10) for this purpose.
We are currently on SP11 but still having the same issue and hence not
able to activate the process chains for BI Admin Cockpit.
Thanks for your help with this.
Ashish

Hi Ashish,
We had the same issue. You must have one of following:-
BI_CONT 702, Support pack 7
or
BI_CONT 703, Support Pack 4
Once you get either of above, you will not have that problem. But you might have some problem in process chains because of roll up of aggregate in delta PC. Just ignore that and you will be OK...( This problem is because there is no agg. defined and PC is trying to do roll up..which make no sense and hence there is error)
Also refer to OSS note 965386
This is my first answer to SDN...so assign my first points..:)
Thanks,
Anil

Problem in activating Process chain in Quality after transport

Hi All,
We have moved a set of process chain to Quality system.
When tried to activate the Process chain it is showing error in DTP.
The DTP name is same as in the Dev system.
So, we tried moving the DTP alone in another transport request.
Still the error exists. We also tried moving the process chain again.
We had tried importing only the structure and also the entire flow again.
Nothing worked.
Please suggest some solution.
Thanks in Advance,
Geetha

Thanks for yor reply.
Suman,
I have checked the Object Changeablity now in Dev system, I found it like Not changable for DTPA.
The DTP from DSO to Cube is fine, but we have problem with the DTP from DataSource to DSO.
Also, in the dev system when i clicked on Object Changeablity I get a popup like "System can be changed; settings not necessary".
Please suggest me like what must be done.
Prashantk & Arvind,
We imported the Process Chain along with the DTP first and we faced the problem.
So we imported the DTP alone again, but still we had the problem.
Again we imported the Process Chain after importing the DTPs.
So what i feel is DTPs must be there in the Quality, but why we have the problem persisting.
That too only for DTP from Data Source to DSO but not for the DTP from DSO to Cube.
Regards,
Geetha
Edited by: Geetha Devi Ramalingam on Jul 12, 2011 9:43 AM

Server name message when triggering process chain through ABAP PROGRAM

Hi all,
When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.
Thanks,
Uday.

Hi Shanthi,
How to write exception handling for this.
Quick reply is nedeed.
Thanks,
Uday.

Activating Process Chains in QA System

Hi All,
i have transported objects from DEV to QA. all the objects in the QA are in active state but the process chains are not activated and they are in grey state. how to activate the process chains manually. are there any pre defined programs to activate the process chains.
Regards

Hi,
try to do the following..
Got to RSPC and there select ur chain by double clicking it, next go to the menu PROCESS and there u have option called check and activate . So this option will first try to check the consistency of ur chain and then if no problem exists it will activate it.. and in case if prob does exists it will highlight the process where it encountered teh errors..
Hope this helps..
Regards,
Pankaj

Errror when activating process chain

Similar Messages

Maybe you are looking for