Errrors

Hi all,
I been  attending some interviews lately. I was facing a common question from the interviewers is that wat type of errors did u come across? and how did u solve them.Am sure everybody who is working should have come across several problems or errors,and must have solved many.I would like to know few of those errors and how u solved it. The errors can be from extraction, loading or in the process chains.
I do not need any complex errors and not too simple ones as well.
Points will be rewarded.
Thanks in advance
srinivas
Message was edited by: anil srinu

Anil,
You can also check the following links for some other errors, and also for handling those errors.
http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/05/bb223905b61b0ae10000000a11402f/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Ashish Maini
Message was edited by: Ashish Maini

Similar Messages

  • While activating the ODS i'm getting these errrors

    Hi All,
    While activating the ODS i'm getting these errrors,
    1) The creation of the Export Datasource failed
    2) RFC Connection to the source system is damaged --- no metadata upload
    3) Error when activating ODS object
    What would be the reasons.............?
    Plz Reply back me on [email protected]
    Regards,
    Kiran

    Hi,
    Im finding a similar issue but with task SDE_ORA_GLJournals,
    the code is :
    AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
    AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
    the parameters are also fine in the parameters file.
    Has anyone found a solution or an explanation for this?
    Thanks a lot, regards
    Nestor

  • Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.

    Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.
    And please remove one of my unassigned user.

    Are you 100% sure that every detail of your information is the same in each place?
    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html

  • Trying to install Adobe Premiere elements 12.  When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use.  Please close all running exe(s).  Nothing is runnin

    question:  Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

    Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    See if this helps:
    Error "License store does not allow writing" | Install log | CS5, CS5.5

  • Downgrade the ios 7.02 to 6.1.3 i have got errror 3194 show the solution

    downgrade the ios 7.02 to 6.1.3 i have got errror 3194 show the solution

    Downgrading the iOS version isn't supported by Apple.

  • JspException: Input/output errror: SocketException: Connection reset by pee

    In weblogic 8.1, getting below exception often,
              javax.servlet.jsp.JspException: Input/output errror: java.net.SocketException: Connection reset by peer.
              at org.apache.struts.util.ResponseUtils.write method
              Although no problem, but it seems to slow down.
              Technology used is mix of jsp, servlets & struts framework
              Any comments will be highly appreciated

    I also experience this. I have wenlogic 8.1sp6.
              It was affecting one part of my application in that no data is being returned. I had to stop and restart the server to get connection going again. I notice no one with weblogic 9 has the problem. I may upgrade to version 9 soon if that will help to solve this problem.

  • Errrors while buliding"\Desktop\Flash Player\Source" of AdobeAccess

    Hi, I am trying to rebuild the "AdobeAccessPro4-setup\Reference Implementation\Sample Video Players\Desktop\Flash Player\Source" by using "Flash® Builder™® 4.7" and Flex4.6 SDK, But I couldn't able to rebulid it because of following errors, Can anybody advice to fix those errors?
    * 1046: Type was not found or was not a compile-time constant: VideoSurface.    in VideoInfoPanel.mxml
    * 1046: Type was not found or was not a compile-time constant: VideoSurfaceInfo. in VideoInfoPanel.mxml
    * 1119: Access of possibly undefined property netGroup through a reference with static type org.osmf.net:NetStreamLoadTrait.    VideoInfoPanel.mxml
    * 1120: Access of undefined property OSMFSettings.    VideoInfoPanel.mxml    
    * 1120: Access of undefined property VideoSurface.    VideoInfoPanel.mxml    
    * 1172: Definition org.osmf.media.videoClasses:VideoSurface could not be found.    VideoInfoPanel.mxml    
    * 1172: Definition org.osmf.media.videoClasses:VideoSurfaceInfo could not be found.    VideoInfoPanel.mxml
    * 1172: Definition org.osmf.utils:OSMFSettings could not be found.    VideoInfoPanel.mxml

    Hi Hiroshi,
    Thanks for your prompt response. You are right.
    It's ok now, after I added SWC Folder "..\OSMF" at Flex Build Path of
    Project Properties
    Thanks & Regards
    Soe
    From: Hiroshi Okugawa [email protected]
    Sent: Wednesday, 12 February, 2014 11:37 PM
    To: ANSoe
    Subject: Errrors while
    buliding"\Desktop\Flash Player\Source" of AdobeAccess
    Re: Errrors while buliding"\Desktop\Flash Player\Source" of AdobeAccess
    created by Hiroshi Okugawa
    <http://forums.adobe.com/people/Hiroshi%40Adobe>in *Adobe
    Access DRM / Primetime DRM* - View the full
    discussion<http://forums.adobe.com/message/6113423#6113423

  • Investment order settlement rule Errror

    Dear All,
    While creating an Investment order, system will ask for creation of AUC asset if investment profile in assigned to the Order and creates an AUC asset with autoomatic generation of settlement rule.
    But when i m trying to create the said order with investment profile attachment, and AUC creation system is not allowing me to save the order with errror as below:
    Enter a distribution rule for Asset without a validity limit
    Message no. KD059
    Diagnosis
    The settlement profile used requires you to define a distribution rule for Asset. For period 003 2011, however, you have not created a distribution rule for Asset.
    Procedure
    Create a distribution rule for Asset without a validity limit, because, if the distribution rule does have a validity limit, the system always issues this message in the period following the last valid period.
    You can also use a different settlement profile that does not require such a distribution rule, or change the settlement rule used.
    Can you pls let me know what is the cause of this error message,
    Thanks & Regards,
    Ravi

    Dear Ajay,
    I have not manually created settlement rule as it is an Investment order to which Investment profile is assigned.
    When Order is created, system will prompt for AUC creation. I have done that but when saving it is showing this error.
    System will create Settlement rule automatically to this investment order, which is not happening in my case though i have assinged Investment profile.
    Pls advise
    thanks,
    ravi

  • What is Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154

    If Can, Please Help!
    I received the following System Error while trying to update Adobe Reader 8:
    Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154
    I'm running Home Vista Premium

    Have no clue. However, this is not the Reader forum either. It may be that you do not have permission to do the update (probably need to be the administrator) or you have anti-virus running. If it is really an OS error, then maybe the question needs to be asked in a MS forum.

  • Run time errror in using filter

    hi
    I have used a filter in ordinary table using if_wd_table_method_hndl. when I give some random value for filtering it throws a run time errror how to fix this

    Hi Rupa,
    Sorry for the late response. I have a working example based on the same thread right in front of me. I did try re-check my application by entering some invalid values into the filter inputfield. It just ended up in a blank table without no matching entries. I guess that you have missed somewhere in following that thread. I will explain the steps to do.
    Regards,
    Uday
    Creat 2 context nodes TABLE_NODE (Based on MARA structure & define few attributes under this node for your table, cardinality 0..n & selection 0..1, uncheck the 'initialize lead selection') & FILTER (Based on MARA structure & define only 1 attribute MATNR under this node for filter values , cardinality 0..n & selection 0..1) .
    In the view create a table ui element named TABLE_ELEMENT & bind to context TABLE_NODE.
    Now specify an action (ON_FILTER) for event "onFilter" of the table. Now you will have an action ON_FILTER created for you in the Actions tab. Double click on it and write the coding for the event handler.
    Coding in ONACTIONONFILTER (Event handler method for ON_FILTER) :_
    method ONACTIONON_FILTER .
      wd_this->table_control->apply_filter( ).
    endmethod.
    We need to define special properties for the column MATNR of TABLE_ELEMENT. The "filterValue" property of this MATNR column should be bound to the MATNR attribute under FILTER node. Also checkmark the "isFiltered" checkbox for the MATNR column.
    Define an  attribute TABLE_CONTROL of type IF_WD_TABLE_METHOD_HNDL in the attributes tab.
    Coding in WDDOINIT (Fill the table & filter with values) :
    METHOD wddoinit.
      DATA: lv_node TYPE REF TO if_wd_context_node,
            lt_mara TYPE ig_componentcontroller=>elements_table_node,
            lt_filter TYPE ig_componentcontroller=>elements_filter,
            wa_filter TYPE ig_componentcontroller=>element_filter.
      lv_node = wd_context->get_child_node( name = wd_this->wdctx_table_node ).
      SELECT * FROM mara INTO TABLE lt_mara.
      lv_node->bind_table( new_items = lt_mara ).
      lv_node = wd_context->get_child_node( name = wd_this->wdctx_filter ).
      SELECT matnr FROM mara INTO TABLE lt_filter.
      SORT lt_filter BY matnr.
      lv_node->bind_table( new_items = lt_filter ).
    ENDMETHOD.
    Coding in WDDOMODIFYVIEW (Store the reference of the table & also set the table's key attribute) :
    METHOD wddomodifyview .
      DATA wd_table TYPE REF TO cl_wd_table.
      CHECK first_time = abap_true.
      wd_table ?= view->get_element( 'TABLE_ELEMENT' ).
      wd_this->table_control  ?=  wd_table->_method_handler.
      wd_this->table_control->set_key_attribute_name( 'MATNR' ).
    ENDMETHOD.

  • When trying to set up an email account I keep receiving ssl errror message. Any advice please.

    When trying to set up an email account I keep receiving ssl errror message. Any advice please.

    Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
    Answer: Yes
    Then "Verifying" appears at top of screen but nothing happens.
    Tiscali/Talk Talk is the provider.

  • What are tools used by the xi/pi system ,to bug the errrors

    hi gurus,
    what are tools used by the xi/pi system ,to bug the errrors.
    regards,
    subba reddy

    For all kind of errors the only tool available which bugs or say alerts for the error is Alert Management.
    Alerts are messages which can be raised in case of failure.
    Alerts - used for system errors, u can send a mail or msg whenever there is any failure. alert configuration can be done in t-code - ALERTCATDEF.
    Alert Categrory can be defined in transaction ALRTCATDEF on abap stack. we can assign receipients to every alert category which specifies who will receive alert in case of error.
    Alert rules can be defined in RWB.
    for configuring alerts u need follwing roles first for defining or creating alertcategory
    the roles reuired to access the RWB are:
    1. SAP_XI_RWB_SERV_USER
    2. SAP_XI_RWB_SERV_USER_MAIN
    The roles for the Alert Management are:
    1. SAP_ALM_ADMINISTRATOR
    2. SAP_ALM_CUSTOMIZER
    3. SAP_BC_ALM_ALERT_USER
    Once this is done
    alert category is defined and then tested
    For Alert please see
    The specified item was not found.
    http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
    For details follow this link,
    http://help.sap.com/saphelp_nw70/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm

  • Errror while executing transaction code ME23N

    hi,
    Errror occurs while executing the transaction code ME23N
    error message as follows:-
       YOU ARE NOT AUTHORISED TO EXECUTE PROGRAM SAPLMEPO
    PLEASE SUGGEST SOME SOLUTIONS TO IT.

    Hi,
    Execute transaction ME23N. WHen you will get message for no authorization, enter /nSU53 in command field. System will display missing authorisation object frm your roles. Give this authorisation object along with values (or provide screeprint) to security person. He/ she may provide you required authorisation.

  • The iphone "iphone" could not be updated. An unknown errror occured (21)

    The iphone "iphone" could not be updated. An unknown errror occured (21)

    See Resolve iOS update and restore errors - Apple Support, and click on "21."

  • Errror.printstacktrace()   in non debugger version of flash player

    Hi,
              i want to log the  run time errors occured  into data base . I am able to handle it by using try catch block.
    Using  errror.printstacktrace() method i am able to get the errror occured at the source with line no.
    Un fortunatley  errror.printstacktrace()  returns null in non debugger version.Its working only in debugger version of flash player.
    but in  production  environment we will have only non debugger version of flash player. Is any work around to  get the errror occured at the source with line no.(simillar to stack trace)
    I don't unserstand why we have to use non debugger version in production environment. Is any advantage of having non debugger version in production environment?
    Regards,
    Thiru

    Well, the non-debugger version is much faster, and, because it does not show the exception dialog it is more tolerant of run-time errors.  I don't know of any way to get more details without a debugger player.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

Maybe you are looking for