ERS for automatic PO generated via GR

Hi all,
I am trying to do ERS for a PO which is generated automatically at the time of GR. But I am not able to do it, when i m doing ERS via MRRL, it is showing no documents found. But similarly for the same material and vendor when I manually create a PO followed by GR, I am able to do ERS.
On analysis, I found that during the automatic generation of PO at the time of GR, the EKRS table is not getting updated but at the time of manual creation of PO, the table EKRS is getting updated.
I have checked the checkboxes of the vendor master and the NO ERS checkbox is not flagged in the info record , in PO, ERS checkbox is flagged both the time. Kindly help

Then I would believe that is your problem.    In the typical process when a PO already exists, the ERS indicator is set for each line item.   So when the GR is performed the system knows that it should be treated as an ERS item and populates the EKRS table with the appropriate values. 
In your scenario the GR is done first.... therefore the system does not know it is an ERS item for that supplier and it does not populate the EKRS table.  
Regards,
Sandra

Similar Messages

  • Assign new document type for automatic MRP generated PR

    Dear Experts ,
    I want to have a document type ZMRP  MRP generated Purchase Requisitions ( automatic ).
    Also i want it to have a release procedure .
    Where do i make the said assignment of document type ?
    The same is the case for Purchase requisition for automatically generated PRs  through Maintenence orders .
    Regards
    Anis

    Hello Experts ,
    I have done the assignments , but the system is still picking up the document type NB .
    I may or may not define MRP group in the material master as MRP group is not relevant for my client .
    I want to know , from where does the system still pick the document type NB ?
    Regards ,
    Anis

  • Payment via FPY1 and  a lock for automatic clearing

    Hello,
    I would like to lock a debit item for automatic clearing but let it be paid via FPY1.
    When trying to lock it using the posting lock it can't be paid via FPY1.
    What can I do ?
    Thanks,
    Vered

    Hi ,
                In
    CA/A/r a/p--basic function--open item management --clearing control--define specification for clearing types --define defaults for account maintenance
    click on the clearing type (03,04) and go to selection criteria define  for clearing category and the concerned main/sub , tick the NC column , this will exclude the particular main sub from clearing .
                                                               similarly for  account  maintenance during invoicing go to
    sap utilities --- invoicing ---invoice processing --item selection in invoicing --item selection in account maintenance for the clearing type , click on item selection for account maintenance , for the main/sub, mark OISEL ="9" 

  • Automatic sequence generator for account_id in FIM

    Experts,
    I want to give general user access to create user accounts in FIM however I want account_id/employee-id for such users generated sequentially.
    Like xyz1 then xyz2 and so on.
    Is it possible to generate sequence in FIM?
    Thanks,
    Mann

    Hello Mann,
    This is possible within FIM, but you will need to create a custom workflow activity for this. The main reason is the fact that FIM is a platform and you need to tell it how to function within your own business requirement.
    There are various threads and articles that explains this in great detail. Have a look at the following and shout if you need more input.
    http://social.technet.microsoft.com/Forums/en-US/5cc9b7fb-6068-4661-a5ed-6a159a1b5418/generate-an-unique-id-with-an-incremental-value-within-fim?forum=ilm2
    http://www.fimspecialist.com/fim-portal/custom-workflow-examples/generate-unique-attribute-workflow-using-enumerate-resources-activity/
    http://www.wapshere.com/missmiis/generate-unique-attribute-activity
    HTH
    Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer faster.]

  • Tax Code in case oF ERS for shipment cost

    Hi,
    We are using Shipment cost documents to calculate the customer freight.
    In shipment cost document, we need to transfer the amount to accounting.
    In that case system will create PO automatically.
    We need to activate ERS for all the vendors, in that case when we transfer the shipment costs to accounting, system is asking to enter Tax code.
    We are not using Tax determination at all in shipment cost document.
    Can't we use ERS without Tax code?
    Where does this Tax code come from into the PO? is it through Tax determination condition technique?
    is there any way we can deactivate Tax code?
    Please suggest.
    Thanks.

    For Standard Materials, Tax code is defaulting from Info record.
    As freight is a service, we only have Short text in the PO not the material.
    Is there any way i can create info record for service materials? so that i can enter tax code in info record and that defaults into PO.
    Thanks.

  • Creation of PO for an already generated number !!

    Hi All,
    The Requirement is to create a Purchase Order for an already generated number.
    Ex: The generated number is 4500026080.
          Now a purchase Order 4500026080 need to be created.
    Please let me know if more clarification required.
    Thanks & Regards,
    Deeba

    From where you are getting this no.? Because when you will create the PO it will automatically generates the PO # for you.
    I think you can find some enhancement option(User exit/badi/enhancement spot) at the place right after the system is generating the PO and then replace with the once you have created.

  • What are the settings for automatic service PO?

    What are the settings for automatic service PO?

    Hello,
    I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
    PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
    I hope you can help me, thank you!

  • PO Release Strategy - Only for Non MRP generated materials

    Hello,
    I have a requirement in which any material which was generated via MRP (via PR) should not go through a release strategy at the PO level, but a non MRP generated PR should...
    Is this possible at all? I know its possible at the PR level, but not sure at the PO...   Would this be a case where we would need to added a field to the CEKKO structure thats for MRP generated PRs ? 
    Thanks

    Hi,
    By business any PO created, should follow release procedure as PO a committed document which will further send to vendor.
    If you are sure about your requirement, PO created from MRP PR should not follow release strategy, then no need to go for any User Exit.
    Just create separate document type for PR (ZMNB) , create separate document type MRP PO( ZMNB) and  link MRP PO document type ( ZMNB) with MRP PR document type( ZMNB) in flowing path:
    SPRO>MM>Purchasing>Purchase Order>Define Document Types
    Now select your ZMNB B Purchase Order Document type and click link purchase requisition document type in Dialog Structure, enter ZMNB Purchase Requisition Document type with a new entry & save.
    As you created release characteristics of document type (CEKKO with BSART), then do not keep Value u201CMRP PO document type (ZMNB) u201Cin the release characteristics of document type and design your release strategies.
    Now create your PO with MRP PO document type (ZMNB) and see no release strategy triggered.
    Regards,
    Biju K

  • What is the user exit for automatic account determination in PO

    Hi Experts
       I ned to know  what is the user exit for automatic account determination in PO
    my client needs the document type to defines Account Assignment Category.
    choosen a document type Account Assignment Category is defined automatically.  you can't choose
    a wrong  Account Assignment Category from the drop down list.
    thanks form you help.

    If this is the case than why don't you use the Transaction variant
    SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
    If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
    The exact solution for your problem is as follows
    Go to Tcode SHD0 and enter the transaction variant
    In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
    This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
    Once you finish system will save this one as a variant
    Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
    W content and output only for your case the field XXXXXXXX should be selected for W content and output only
    Make sure you have value 1 in contents field
    If not then restart the variant again and on the ME21Nscreen reselect the invoice field
    Later exit and save (save in the object which you can transport)
    Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

  • How automatic po generated in third party sales

    In third party sales an automatic puchase order is generated along with the purchase requisition....kindly help how can i get the automatic po generated
    Regards
    Anindya Das Gupta

    Hi,
    A new PO is created for a 3rd-party sales order item when indicator Create purchase order automatically (V_TVAP-ALEKZ)  is set for  schedule line category and the Event PUR_ORDER_CHANGE_VIA_SD_EVENT is activated (SWFDVEVTY1-ENABLED field is marked). Please see information in note    332475 for more information.
    Kind Regards,
    Suneet

  • Problem for automatic reservation created for PM01 order in PM

    Hi,
    I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item (Actually it is determined from OBYC transaction with a combination of GBB (A/c Key) and VBR (A/c Modifier).
    But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
    Can you suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
    Thanks in advance,
    Satadal

    Hi Friend!
    Try exploring the sam while post the mat. document thro' MIGO using FI validations..OB28..
    Let leave the PM reservation.
    RAO

  • Automatic Windows Update via Group Policy in Windows 8

    Hi,
    I have created a new GPO to place some settings on the Automatic Update to all my client pcs. The settings applied as the image i uploaded below. The problem is that this GPO were successfully applied to all my Windows 7 machine but not Windows 8.1 machines.
    Is there anything that i missed or i should know about Windows 8.1 automatic update configuration via Group Policy?. I've tried to google but cant find any guidance that relates. I'm not using WSUS. Appreciates any advise. Thanks.
    Cheers, Sparcx [MCTS,MCITP-EA]

    Hi Leon, yes i have read the blog that you gave, It says that Windows 8 requires a KB update to roll the changes that will solve this issue. However its also said that the update is included in Windows 8.1 and there's no need to update to solve the Automatic
    Update behaviour via Group Policy as mentioned. Also tried to apply the KB update suggested, but failed. It is not for Windows 8.1 platform. Is there any other suggestion? I kinda stuck here..
    Cheers, Sparcx [MCTS,MCITP-EA]

  • Budget control for automatic Purchase orders

    Hi All,
    We are facing problem in budget availability check for automatically generated Purchase orders through MRP run.
    We are able to control the budget check for manual Purchase orders  but how can we control budgets for automatically generated Purchase orders.
    we are using IM budgeting for orders.
    Please let me know your valuable inputs for the above issue.
    Thanks in advance.
    Regards
    Nagesh

    Hi,
    You have to run FM_MRP_PR transaction in order to transfer MRP documents to FM for budget control.
    Regards,
    Eli

  • Remove dafault value for field BSEG-REBZG "V" in ERS for credit memo

    Hi Gurus,
    I'm running ERS for Returns PO and I noticed that when the credit memo is posted, the invoice reference field has the value "V" which would then take into account the default payement terms for the vendor.
    I want the system to NOT default that value "V" because I want my credit memos to have a due date the same as the baseline date.
    If you create the credit memo online via MIRO, you'll notice the default due date is equal to the baseline date since, by standard it ignores the payment terms.
    Any ideas how to solve this? Thanks in advance!
    Regards,
    Marvin

    can u tell me wich user exit you used?
    thanks,
    Michael

  • Backgorund job for automatic creation of billing document

    Dear All
    Could you advise me on how to set up a bacground job for automatic creation of billing document?
    Thanks and regards,
    Sylwia

    In standard, you cannot generate automatic billing but you can set date and time so that you can generate invoices at the specified time in bulk.  The TCode to achieve this is VF06.
    thanks
    G. Lakshmipathi

Maybe you are looking for