ERS Invoice Error from MM to SUS

Hi,
I am getting the following error when posting Invoice from MM to SUS:
I am getting this error in SUS client, we are on SRM550, SP10 and on idependent clients for SUS, EBP and MM.
Error Message:
An error occured within an XI interface: Exception occurredE:BBP_TAX:013 -Not possible to calculate tax I:R5:553 -'Different country' field contents deleted because identical to 'Country' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BBP_TAX:005 -Error in parameter transfer E:BS:013 -System status INCM is active (SUS Invoice 5000000087) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002;
We tried with note No. 888952, but the error persists for Tax and parameter transfer. We need note or any further inputs to correct this errors in SUS. We are using Tax calculations from Backend.
Your inputs will be highly appreciated.....
Regards,
Mohan

Hi
<u>Which SUS and R/3 versions are you using ?</u>
<b>Please go through the links/pointers, which will definitely help -></b>
Refer SAP OSS Note number 806361
Re: invoice in sus
ERS- Evaluated Receipt settlement
R/3-XI-SUS
Error Sending SRM PO Change to SUS-Different Country field contents deleted
Purchase Order Response in SRM from R/3 through XI
Automatic Entry of purchase order Response
Enter a country for partner with type 'Sold-to Party'
Re: SRM-XI-SUS
Do let me know.
Regards
- Atul

Similar Messages

  • Vendor Master Replication Error  from ECC to SUS : Error in ALE Service

    Dear Experts,
    We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
    We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
    Please provide inputs to overcome this problem
    Thank you,
    Regards,
    Ravi

    Hi,
    Check
    Re: Idoc Error Status "Entry in outbound table not found "
    Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
    Set up them again and When these have been set up try reprocessing your IDocs from BD87

  • ERS invoice not showing in SUS

    In ERP when MRRL is run for PO's which are for same vendors, it creates one invoice for these  PO's. In sus when we look it is not showing these invoices as it has two Po's linked to it. what needs to be done in sus to correct this problem.
    Edited by: nancy on Mar 17, 2009 8:41 AM

    Hi,
    Check Idoc IDOC "GSVERF01" is used for this purpose.
    ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario.
    Thanks
    Zameer

  • Invoice and Credit Memo from ECC to SUS

    Hi Gurus
    Is it possible to replicate Invoice or a credit Memo from ECC to SUS if the PO was delvired to vendor through SUS.
    with Regards
    Manjunath

    HI ,
    part1 :
      ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario. IDOC "GSVERF01" is used for this purpose.
    part 2 : Invoices can be created in SUS system by vendor against ASN ( Advanced Shipping Notification or purchase Order . The invoice is transfered to ECC system through XI. Message Interface for the same is "InvoiceRequest_Out" .
    For reference please check
    http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
    Regards,
    Kalandi

  • Error in creating invoice list from VF21 transaction

    Hi,
    i am craetin a sales order fro VA01 transaction and for the perticular sales order number I am generating the billing document number.when I take this number and try to create a invoice list from vf21 transaction,it gives an error message as no invoice list can be created.and the processing status of the document becomes invalid.
    what can be the reasons?plz sugges....

    Hello all,
    We are facing the same issue.  While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
    Hi Mateus , the document is you mentioned is currently expired / unavailable.  Can you kindly upload the same again please?
    Thanks in advance,
    Shaji Narayanan

  • Error while transferring Purchase Order from ECC to SUS

    we are working on plan driven procurement and transferring the PO from ECC to SUS, we are getting the error as "No partner found for partner number ECCSUS8".
    In ECC the Vendor No is ECCSUS8, trasfered vendor from ECC to SUS. Vendor registration is done based on the mail generated and vendor login is created in the portal and assigned the roles.

    Hi
    Are you facing this error in PO transmission to SUS (as you mentioned below)? or you are facing this error while sending out the vendors from R/3 to SUS from BD14?
    If you are facing this in vendor transmission, you need to remove the tick (flag) "Use self reg component" in SPRO-SRM server-Supplier Self-ServicesMaster DataMake Settings for Business Partners. Then you can transmit the vendors from R/3 succesfully.
    If this error is in PO transmission, need to analyse further.
    Pls do let me know.
    Thanks
    Kiran

  • Cancelling ERS invoice of Freight GR

    Hello all,
    I know there already exist some threads about this topic, but I couldn find any with the connection to the freight solution (freight costs).
    MR8M
    Due to Message No. M8414; I'm not allowed to book an invoice cancellation in MR8M for an ERS invoice. Reason is
    If you want invoice creation to take place completely using ERS, then you must cancel the goods receipt and not the invoice document. ERS will then create the relevant cancellation invoice document for the canceled goods movement. When the goods receipt is entered again, ERS creates the invoice document according to the goods receipt quantity and the conditions from the purchasing document that are valid at that time.
    This method is the only means of guaranteeing that the messages that may be created during ERS are also issued.
    This is clear for me, so I want to book the cancellation of GR in MIGO
    Here the error message is: Transaction code MBST (=> use transaction ML81 / ML85) not defined
    So I want to take ML81 or ML85
    But here I do not have any chance to change, delete or cancel the GR.
    I also checked transaction OMBZ.For GR-Based IV, Reversal of GR Despite Invoice for movement type 102.
    Where can I finally start cancelling this process?
    Hope anybody can help me,
    kind regards Barbara

    Hi,
    Please refer below link in this regard. Thanking you.
    cancellation of ERS invoice and GR

  • Cancellation of ERS invoice and GR

    Hi gurus,
    I am trying to cancel good receipt via MBST, but getting error M7021 (Deficit of PU IR quantity). This is caused because there is an invoice booked via MRRL for this PO/GR. When trying to cancel this invoice via MR8M there is message issued (M8414), saying that this is ERS invoice and cancelation can not be processed. Proposal is to cancel good reciept first, but as stated above, this is not possible because of error.
    We are going around a circle, can you please advise how to solve this problem.
    Thanks!

    Hi,
    As a procedure,
    First step,Cancelling the ERS invoice.
    Second step,Cancelling the Goods receipt.
    Without cancelling the ERS invoice,system wont let you to cancel the Goods receipt.
    Since your are getting error message on First step,Change the Message attribute From
    Error to Warning message (M8414) -->Logistics Invoice Verification -->Define Attributes of system messages.
    Then system will let you to cancel the ERS invoice and cancell the Goods receipt.

  • Double generation of ERS Invoices

    hi all,
    Oracle Applications 11.5.9
    After running of Pay on Receipt Auto invoice and Payables Open Interface. Two ERS invoices of same amount against the same receipt number are generated in AP with different numbers.
    Regards
    Shekhar

    Shekhar,
    We've also encountered this problem in 11.5.9.
    When running Pay on Receipt Auto Invoice make certain it is the only one running. When more than one of these programs are executing at the same time duplicates are created. At minimum, one will reject and must be removed from the Payables Open Interface reject report manually via the Oracle Gateway form.
    The solution, per Oracle support, is to make the Pay on Receipt Auto Invoice program incompatible with itself. While I don't understand that request, when presented to a DBA, they understood what to do to make certain the routine could not concurrent with itself. Since this change, no problems have occurred.
    See metalink note 268878.1.
    Regards,
    Rich

  • A/R Invoice Error

    Hi Experts,
    I got an error msg "G/L account is missing (2) [Message 131-46]"
    This happened when I add A/R invoice copy from on Delivery with zero balance.
    Here in complete scenarion:
    1. Create sales order $ 10,000
    2. A/R Down Payment Invoice $ 3,000 copy from SO
    3. Incoming Payment $ 3,000
    4. A/R Down Payment Invoice $ 7,000 copy from SO
    5. Incoming Payment $ 7,000
    6. Delivery
    7. A/R Invoice copy from Delivery, then above error msg appear.
    I've filled in all account related to Sales in G/L Account Determination
    I made this scenario because the product will be delivered if all payment have been paid.
    My question is what it the missing account that i have or is there other way to handle its?
    First payment by customer and second payment by Leasing company
    Regards,
    Bambang

    Hello Bambang,
    Have you defined the Rounding account ,Revenue Account, Expense Acct etc for this item? Is it a stock, sales, purchase item? Is it a part of BOM?
    What is setting for "Set G/L Accounts by" in item master data?
    Please also check if the GL account defined under Freight Set up.
    Regards,
    Wilma Wang
    SAP Business One Forums Team

  • Vendor Master Replication from MM to SUS

    Does any one have experience on Vendor Master Replication from R/3-MM to SUS (scenario without EBP).
    Is this replication made via XI?
    Which are the configuration steps for this scenario?
    Thanks
    antonio

    Hi antonio,
      I hope now you r now transfering vendor to SUS using 
      transaction BD14 with message type Z_CREMAS_SUSMM as  
      SAP suggested.
      Your error due to incorrect mapping in Integration 
      Directory of XI.Kindly check the Interface 
      determination for message type Z_CREMAS_SUSMM.
      If possible send more details for error .Is this at 
      SUS End ?
    Regards
    Sachin S M

  • ERS invoice creation MRRL

    Hi,
         In my system we are creating ERS invoices using the MRRL transaction , but this is taking too long . We are using MRRL to settle shipment cost documents , the approx. number of settlement sheets generated every day in our business scenario is about 2500 . So inspite of running MRRL every day ( in Doc. selection 4 - since 3 errors out with max no. of items allowed in FI ) the job takes nearly 4- 10 days to complete a weeks invoices.
    Any help would be welcome here.
    Kunal

    Hi,
    You can create 3-4 variants with set of Vendors and run the job.
    Ex. vendor 000001 to 000200 - > Variant 1
       Vendor 000201 to 000400 ...> Variant 2
      Vendor 000401 to 000600 ....> Variant 3.
       Vendor 000601 to 000800 ...> Variant 4
    Hope this this will deduce the overall job completion time very much.
    Thanks,
    Kumar Arcot

  • PO from R3 to SUS

    Hi everybody,
    I am implementing SUS-MM scenario. I am in SRM 4.0 version and backend is ECC5.0. I have configured the SUS and XI. I have the following question for you experts:
    - I sent a PO from R3 to SUS. I cannot see any errors in WE20 and SM58 in R3 side. I created a userid for the vendor and when I login to SUS using the vendor id I cannot see the purchase order. Please provide some help in debugging.
    Thanks for your help in advance.
    Venkat

    Hello Venkat,
    Do you see a successful message output in ME23N ?
    Do you see an outbound IDOC ORDERS in MM ?
    If yes, is it in status 03 (IDOC sent) ?
    (if 30 "ready for dispatch", you may be in Collect mode)
    If yes, do you see the corresponding message in XI ?
    If yes, do you see a new document in SUS ?
    Have you followed all configuration steps from service.sap.com/IBC --> SRM guide "Plan-Driven Procurement with Supplier Integration" ?
    Track the document all along the flow, I you will find the answer.
    Rgds
    Christophe

  • SMTP error from remote mail server after initial connection:

    Hello folks. I having some serious issues sending email to clients with .mac accounts. I keep on getting the following error. Can someone help? I have replaced email address names with "Blank@...) for obvious reasons.
    This message was created automatically by mail delivery software.
    A message that you sent could not be delivered to one or more of its
    recipients. This is a permanent error. The following address(es) failed:
    [email protected]
    SMTP error from remote mail server after initial connection:
    host smtp-mx1.mac.com [17.148.20.64]: 452 try later:
    retry timeout exceeded
    ------ This is a copy of the message, including all the headers. ------
    Return-path: <[email protected]>
    Received: from ip72-207-229-240.br.br.cox.net ([72.207.229.240] helo=[192.168.0.102])
    by srv3.purenrg.com with esmtp (Exim 4.68)
    (envelope-from <[email protected]>)
    id 1JFeOb-0001FZ-5F
    for [email protected]; Thu, 17 Jan 2008 18:43:41 -0500
    Message-Id: <[email protected]>
    From: "[email protected]" <[email protected]>
    To: Cindy Barnes <[email protected]>
    Content-Type: multipart/alternative; boundary=Apple-Mail-3--1032078955
    Mime-Version: 1.0 (Apple Message framework v915)
    Subject: invoice 520 is overdue
    Date: Thu, 17 Jan 2008 17:43:40 -0600
    X-Mailer: Apple Mail (2.915)
    X-PopBeforeSMTPSenders: [email protected]{
    --Apple-Mail-3--1032078955
    Content-Type: text/plain;
    charset=US-ASCII;
    format=flowed
    Content-Transfer-Encoding: 7bit

    I'm sure someone will give more detail, but it looks like the server blocked your address because it thinks it's a spam source.  If you're not spamming, then it might be someone on the same network spamming, or malware on your computer doing it.  Or it could just be a mistake.  try calling whoever runs your mail server and see if they can give you more information.

  • J1IEX capture excise invoice error.  part 2

    was created to continue from this [thread|J1IEX capture excise invoice error.; which was locked for no apparent reason.
    Mr Jeyakanthan A, don't you lock my thread and telling me to search the forum for answer.
    i have done my search on this [ topic on J1IEX no selectable item|http://www.sdn.sap.com/irj/scn/advancedsearch?query=j1iexdoesnotcontainany+selectable], it had yielded a few threads but none of it offer a resolution.
    go thru the threads yourself if you want.
    once again don't you lock my this thread.

    Hi,
    The message 'document/PO doesnt contain any selectable items' would come when there are any open PO's for the same vendor for the same material. Check whether there are any open PO's in ME2L or ME2N. Close the unwanted PO's by ticking the Delivery completed in the Delivery tab and save. Try J1IEX after this.
    The option of Internal excise invoice number will come in the excise item tab under part 1 tab if the excise values are Captured/Capture & posted while processing MIGO. If the excise values are not captured, please try reversing the MIGO and process a fresh MIGO and check excise values are being captured or not.
    Regards
    Hari 
    Hi Hari,
    i have created a new vendor and maintained all the entries in J1ID for it. yet i still encountered this message.(in response for any open PO for same vendor for same material cases.)
    next, i have also entered the necessary data in the PO's Import tab(on both header and item level), but when i tried doing MIGO-GR, there's no excise tab as well. i guess this might also be part of the reason why i am hitting that message when doing J1IEX.
    strange..i had tried all means but still cant get it work.

Maybe you are looking for