ERS - Payment method not on the invoice

Hi All,
In the process of creating invoices using ERS, the payment method from the vendor master will not be defaulted on the invoice.
Is there any way, may be a usereixt/badi, to default the first payment method given in the vendor master on the invoices created in background.
Thanks,
Venkat

Found another method

Similar Messages

  • Copy payment method of payer to invoice

    hi everybody
    I have to copy the payment method of a payer to the payment method found in the Invoice header
    i tried to use the INCLUDE RV60AFZC FORM USEREXIT_FILL_VBRK_VBRP but its not working, does anybody have solution for this?

    You'll need to use a routine in VOFM transaction (Data transports -> Billing Documents) to change vbrk-zterm field. You might need some assistance from your SD consultant to assign the routine to the document type in the configuration.
    Although it is strange that Payer's payment method is not there by default... What does it use then - sold-to's payment method?
    Good luck!

  • Payment Method not in F110 for MIRO invoices

    Good day all
    One of our company codes are experiencing the following problem.
    1. The payment method is maintained in the vendor master.
    2. When doing a FB60 (sundry invoice) and the F110 (automatic payment) the payment program picks up the invoice for payment and all 100%.
    3. When doing a MIRO (LIV invoice) and then F110, the payment program issues error that no valid payment method is found for the MIRO invoice.
    4. This is happening on the same vendor account.
    What can the reason be that the payment program picks up the payment method for the sundry invoice but not for the MIRO invoice?
    Any advice or ideas?
    Thank you all.
    Lu.

    Hi Reema,
    I also faced similar problem earlier. Following could be the reasons:(These worked for me)
    1. The vendor is already picked up in an earlier run and that run is not fully processed.
    2. The amount is not yet due
    3. Sometimes, if the address in the vendor master is not fully updated, it fails to pick it up. This usually happens if you have enabled jurisdiction codes etc
    Hope this helps
    Regards,

  • Payment method not getting copied automatically during posting invoice

    Dear Gurus,
    The payment method maintained in the vendor master " T" / "C" is not getting copied while posting the invoice document in MIRO or FB60 .
    The terms of payment is being defaulted from the master data, but not the payment method.
    Please help in this regard.
    Regards,
    Raghu

    Hi Raghu,
    You should check that the invoicing party on the details tab is the
    same vendor that has the payment method supplement filled in the
    vendor master record under the payment transactions accounting screen.
    Best regards,
    Adam.

  • What I've to do if the App Store told me my payment method not valid

    What I've to do if the App Store told me my payment method not valid

    Then contact your bank and find out why the authorization is being refused. 
    Note that debit cards are not accepted in all markets. You need a valid credit card with a billing address in the country of the store in which you're trying to set up an account. You must also be physically present in that country.
    You can not, for example, set up an account in the US or UK store if you are in Russia.

  • AP - Payment Process not picking up Invoices

    Hi All,
    I am running the payment process from AP(Payments Manager).I have created 5 Invoices on 12-Dec-2013 and have attached the Pay Group. Once i run the payment process with the pay group none of my invoices has been picked up for processing.I have given the date range from 01-Dec-2013 to 13-Dec-2013
    Please help i need close this task ASAP
    Regards

    Hi,
    What are the payment terms on the invoices? If these are not IMMEDIATE, and the payment is not due, the system would not pick them up until they are due.
    What is the payment method on the invoice and in the PPR? Are you running the PPR for electronically paid invoices but the invoices are set to be paid by check?
    Are there any holds on the suppliers you are trying to pay?
    What are the other parameters you gave when running the PPR? It helps to check those against the invoice to make sure they would qualify.
    Information about the pararameters you are using and one of the invoices to be selected would be helpful.
    Cheryl

  • Automatic Payment program: Payment method not defined for vendor abroad

    Hi All,
    I have a situation wherein the client has a company code in Poland . The Company code is trying to make a payment via f110 to a vendor based in sweden. The vendor wants payment to the invoice to be made in Polish Currency i.e. it wants clearing to be done in Company codes local currency.
    But F110 is throwing the error Payment method not defined for vendor abroad. Can you suggest what could be the possible Error.
    Regards
    Nitin

    Nitin,
    Have you followed the above advice, i.e. used the same medium format just allowing foreign payments for it?
    AFAIK, the Poland banks require a separate format for foreign payments, if only because international bank nbr SWIFT has to also be given and not just the IBAN.
    At my company, the Deutsche Bank Poland requested IDocs to be set up instead, I'm working on it now..
    thanks

  • Payment method field in Cutstomer invoice

    HI SAP Guru's
    Is it possible to add payment method field in the customer invoice
    in the first screen while entering Customer details we can see the bank details of the customer, is it possible to see payment method next to bank details?
    Thanks in advance
    venu

    OK
    I think I know you problem.
    You have posted some invoices, Vendor and you now want to change the payment method on them as this is missing.
    this is easy to fix.
    1/ go to FB02 for a document you want to change. Check if the payment method is greyed out. If not you should be able to manually change the value. If it is grey go to point 2
    2/ Go into config, SPRO, Go to ****, Document, Line item, Document Changes, Line items.
    Check for an entry for BSEG-ZLSCH. If there is one there, make sure the field is modifable. If it is not there, create an entry.
    After this config setting is made, go back to FB02 and the field should no longer be greyed out and you should be able to change it.
    If you have loads of fields to change, get an ABAP guy to create a program to use a file of document numbers to change the field.
    If this is useful please assign points.

  • HELP! Payment Method Not Appearing!

    Hello All,
    I am running Vendor report S_ALR_87012103 and for some reason the payment methods are not showing up. I have them entered in the Vendor master records. Could some one let me know how I can get them to appear?
    Points will be awarded generously!
    Thanks,
    Deki

    Hi Jaya,
    The thing is when the report is run without dynamic selection, payment methods for all the line items displayed does not appear. Therefore, if I specify a payment method using dynamic selection, the system simply tells me that none of the line items have payment methods assigned to them.
    - Deki

  • Payment method not transferred to down payment item

    When a down payment request is being paid via the APP (F110), a down payment item will be generated. However, the payment method is not transferred to the new down payment item. Is this the standard or is there a way to update the payment method automatically to the new down payment item created by the APP?

    Hi ,
    Can you please provide the detailed steps for reconstruction , as to what are the T code that you are using and getting the error - as in case of payment to vendor you need to specifiy the payment method if using F-58 .
    Kindly elaborate in detail as to where are you getting the error and what are the inputs that you are providing to the system for the same .
    Cheers ,
    dewang

  • F110 Auto. payment program ..Problem payment method not found

    Hi,
    I done the configuration for automatic payment program.with payment method c.
    when i am running the program the proposal is created but it is with a error saying no valid payment method found.
    Please guide me.
    Thanks
    Micheal

    I had given the payment method C in vendor master,Payment methods in country and payment methods in company code,Bank determination in FBZP.
    I am getting the same problem.Payment method not found.Please find the error list
    Information re. vendor 1900107 / customer  / paying company code 100 ...
    Payment with currency USD, payment method C: No valid payment procedure
    Information re. vendor 1900107 / paying company code 100 ...
    ... payment not possible because of reported error
    End of log
    Job finished
    Thanks and best regads
    Micheal

  • Payment method not found

    Hello,
    I am trying to post a payment to a Vendor and payee is set up different then the supplier.  I checked the data  - seems to be allright but am not able to post the payment  with error 'Payment method not found'.  Payment method has been defined for both the Vendors.
    Please help.
    Thanks.

    Hi ,
    Can you please provide the detailed steps for reconstruction , as to what are the T code that you are using and getting the error - as in case of payment to vendor you need to specifiy the payment method if using F-58 .
    Kindly elaborate in detail as to where are you getting the error and what are the inputs that you are providing to the system for the same .
    Cheers ,
    dewang

  • No Payment Methods Linked to the BP

    We cannot get a payment wizard passed the step 5 "Payment Method Selection Criteria". The error "There are no payment methods linked to the BP" [504-36].
    We checked the Business Partner in question and a payment method has been added and selected on the "Payment System" tab.
    What are we not linking correctly that would cause this error?

    OK - related question
    I have 10k BPs in the system
    and I have 2 outgoing payment methods defined
    and 1 incoming payment method defined
    how can I quickly "activate" the payment methods for all BP's without having to re-import all 10k BPs using DTW?
    is there a script I could run that would activate (check the box) for all vendors - so that the payment methods will be active?

  • MR 11 not updating the invoicing for services

    Hi All,
    I have a scenario where the client uses MR11 for clearing the invoices.
    He does not use MIRO for invoicing.
    During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
    I have checked the Service based IV and the GR based IV in the  invoice tab of PO.
    Can you please advice me as to why this is happening only in case of services.
    Thanks and Regards
    Sridhar.

    Hi Charlie,
    Thank you very much for the response.
    Actually I am looking for the IR reduction and not the GR reduction.
    The note you have mentioned applies for GR reduction.
    Also we are in the ECC 6 environment.
    Please update me with further information.
    Regards
    Sridhar

  • Issue with VC/2 - not fetching the invoice details

    Hi All,
    We have an issue with TCode VC/2 in ECC 6. This is not fetching( not showing) the Invoice documents under the header "Last SD Documents".
    It is fetching the sales documents like orders, credit memo/debit memo requests but not the invoice documents.
    PLease help on this.
    Thanks in advance.
    Edited by: Harini Kesani on Jan 12, 2010 8:25 PM

    Is it possible that 'last SD document' means 'last sales document', not 'last billing document'? Unfortunately, I'm unable to confirm - we don't use this transaction. You can also check what tables are used in this transaction (get help from an ABAPer or Basis) and then check if there is correct data in those tables. It might be using info structures or index tables, which may need to be populated first.

Maybe you are looking for